WSJT-X/boost/libs/math/doc/overview/error_handling.qbk

404 lines
18 KiB
Plaintext

[section:error_handling Error Handling]
[def __format [@../../../format/index.html Boost.Format]]
[heading Quick Reference]
Handling of errors by this library is split into two orthogonal parts:
* What kind of error has been raised?
* What should be done when the error is raised?
[warning The default error actions are to throw an exception with an informative error message.
If you do not try to catch the exception, you will not see the message!]
The kinds of errors that can be raised are:
[variablelist
[[Domain Error][Occurs when one or more arguments to a function
are out of range.]]
[[Pole Error][Occurs when the particular arguments cause the function to be
evaluated at a pole with no well defined residual value. For example if
__tgamma is evaluated at exactly -2, the function approaches different limiting
values depending upon whether you approach from just above or just below
-2. Hence the function has no well defined value at this point and a
Pole Error will be raised.]]
[[Overflow Error][Occurs when the result is either infinite, or too large
to represent in the numeric type being returned by the function.]]
[[Underflow Error][Occurs when the result is not zero, but is too small
to be represented by any other value in the type being returned by
the function.]]
[[Denormalisation Error][Occurs when the returned result would be a denormalised value.]]
[[Rounding Error][Occurs when the argument to one of the rounding functions __trunc,
__round and __modf can not be represented as an integer type, is
outside the range of the result type.]]
[[Evaluation Error][Occurs if no method of evaluation is known,
or when an internal error occurred that prevented the
result from being evaluated: this should never occur, but if it does, then
it's likely to be due to an iterative method not converging fast enough.]]
[[Indeterminate Result Error][Occurs when the result of a function is not
defined for the values that were passed to it.]]
]
The action undertaken by each error condition is determined by the current
__Policy in effect. This can be changed program-wide by setting some
configuration macros, or at namespace scope, or at the call site (by
specifying a specific policy in the function call).
The available actions are:
[variablelist
[[throw_on_error][Throws the exception most appropriate to the error condition.]]
[[errno_on_error][Sets ::errno to an appropriate value, and then returns the most
appropriate result]]
[[ignore_error][Ignores the error and simply the returns the most appropriate result.]]
[[user_error][Calls a
[link math_toolkit.pol_tutorial.user_def_err_pol user-supplied error handler].]]
]
The following tables show all the permutations of errors and actions,
with the *default action for each error shown in bold*:
[table Possible Actions for Domain Errors
[[Action] [Behaviour]]
[[throw_on_error][[*Throws `std::domain_error`]]]
[[errno_on_error][Sets `::errno` to `EDOM` and returns `std::numeric_limits<T>::quiet_NaN()`]]
[[ignore_error][Returns `std::numeric_limits<T>::quiet_NaN()`]]
[[user_error][Returns the result of `boost::math::policies::user_domain_error`:
[link math_toolkit.pol_tutorial.user_def_err_pol
this function must be defined by the user].]]
]
[table Possible Actions for Pole Errors
[[Action] [Behaviour]]
[[throw_on_error] [[*Throws `std::domain_error`]]]
[[errno_on_error][Sets `::errno` to `EDOM` and returns `std::numeric_limits<T>::quiet_NaN()`]]
[[ignore_error][Returns `std::numeric_limits<T>::quiet_NaN()`]]
[[user_error][Returns the result of `boost::math::policies::user_pole_error`:
[link math_toolkit.pol_tutorial.user_def_err_pol
this function must be defined by the user].]]
]
[table Possible Actions for Overflow Errors
[[Action] [Behaviour]]
[[throw_on_error][[*Throws `std::overflow_error`]]]
[[errno_on_error][Sets `::errno` to `ERANGE` and returns `std::numeric_limits<T>::infinity()`]]
[[ignore_error][Returns `std::numeric_limits<T>::infinity()`]]
[[user_error][Returns the result of `boost::math::policies::user_overflow_error`:
[link math_toolkit.pol_tutorial.user_def_err_pol
this function must be defined by the user].]]
]
[table Possible Actions for Underflow Errors
[[Action] [Behaviour]]
[[throw_on_error][Throws `std::underflow_error`]]
[[errno_on_error][Sets `::errno` to `ERANGE` and returns 0.]]
[[ignore_error][[*Returns 0]]]
[[user_error][Returns the result of `boost::math::policies::user_underflow_error`:
[link math_toolkit.pol_tutorial.user_def_err_pol
this function must be defined by the user].]]
]
[table Possible Actions for Denorm Errors
[[Action] [Behaviour]]
[[throw_on_error][Throws `std::underflow_error`]]
[[errno_on_error][Sets `::errno` to `ERANGE` and returns the denormalised value.]]
[[ignore_error][[*Returns the denormalised value.]]]
[[user_error][Returns the result of `boost::math::policies::user_denorm_error`:
[link math_toolkit.pol_tutorial.user_def_err_pol
this function must be defined by the user].]]
]
[table Possible Actions for Rounding Errors
[[Action] [Behaviour]]
[[throw_on_error][Throws `boost::math::rounding_error`]]
[[errno_on_error][Sets `::errno` to `ERANGE` and returns the largest representable value of the target integer type
(or the most negative value if the argument to the function was less than zero).]]
[[ignore_error][[*Returns the largest representable value of the target integer type
(or the most negative value if the argument to the function was less than zero).]]]
[[user_error][Returns the result of `boost::math::policies::user_rounding_error`:
[link math_toolkit.pol_tutorial.user_def_err_pol
this function must be defined by the user].]]
]
[table Possible Actions for Internal Evaluation Errors
[[Action] [Behaviour]]
[[throw_on_error][[*Throws `boost::math::evaluation_error`]]]
[[errno_on_error][Sets `::errno` to `EDOM` and returns the closest approximation found.]]
[[ignore_error][Returns the closest approximation found.]]
[[user_error][Returns the result of `boost::math::policies::user_evaluation_error`:
[link math_toolkit.pol_tutorial.user_def_err_pol
this function must be defined by the user].]]
]
[table Possible Actions for Indeterminate Result Errors
[[Action] [Behaviour]]
[[throw_on_error][Throws `std::domain_error`]]
[[errno_on_error][Sets `::errno` to `EDOM` and returns the same value as `ignore_error`.]]
[[ignore_error][[*Returns a default result that depends on the function where the error occurred.]]]
[[user_error][Returns the result of `boost::math::policies::user_indeterminate_result_error`:
[link math_toolkit.pol_tutorial.user_def_err_pol
this function must be defined by the user].]]
]
All these error conditions are in namespace boost::math::policies,
made available, for example, a by namespace declaration
using `namespace boost::math::policies;` or individual using declarations
`using boost::math::policies::overflow_error;`.
[heading Rationale]
The flexibility of the current implementation should be reasonably obvious: the
default behaviours were chosen based on feedback during the formal review of
this library. It was felt that:
* Genuine errors should be flagged with exceptions
rather than following C-compatible behaviour and setting `::errno`.
* Numeric underflow and denormalised results were not considered to be
fatal errors in most cases, so it was felt that these should be ignored.
* If there is more than one error,
only the first detected will be reported in the throw message.
[heading Finding More Information]
There are some pre-processor macro defines that can be used to
[link math_toolkit.pol_ref.policy_defaults
change the policy defaults]. See also the [link policy
policy section].
An example is at the Policy tutorial in
[link math_toolkit.pol_tutorial.changing_policy_defaults
Changing the Policy Defaults].
Full source code of this typical example of passing a 'bad' argument
(negative degrees of freedom) to Student's t distribution
is [link math_toolkit.stat_tut.weg.error_eg in the error handling example].
The various kind of errors are described in more detail below.
[heading:domain_error Domain Errors]
When a special function is passed an argument that is outside the range
of values for which that function is defined, then the function returns
the result of:
boost::math::policies::raise_domain_error<T>(FunctionName, Message, Val, __Policy);
Where
`T` is the floating-point type passed to the function, `FunctionName` is the
name of the function, `Message` is an error message describing the problem,
Val is the value that was out of range, and __Policy is the current policy
in use for the function that was called.
The default policy behaviour of this function is to throw a
std::domain_error C++ exception. But if the __Policy is to ignore
the error, or set global `::errno`, then a NaN will be returned.
This behaviour is chosen to assist compatibility with the behaviour of
['ISO/IEC 9899:1999 Programming languages - C]
and with the
[@http://www.open-std.org/jtc1/sc22/wg21/docs/papers/2005/n1836.pdf Draft Technical Report on C++ Library Extensions, 2005-06-24, section 5.2.1, paragraph 6]:
[:['"Each of the functions declared above shall return a NaN (Not a Number)
if any argument value is a NaN, but it shall not report a domain error.
Otherwise, each of the functions declared above shall report a domain error
for just those argument values for which:]]
[:['"the function description's Returns clause explicitly specifies a domain, and those arguments fall outside the specified domain; or]
['"the corresponding mathematical function value has a non-zero imaginary component; or]
['"the corresponding mathematical function is not mathematically defined.]]
[:['"Note 2: A mathematical function is mathematically defined
for a given set of argument values if it is explicitly defined
for that set of argument values or
if its limiting value exists and does not depend on the direction of approach."]]
Note that in order to support information-rich error messages when throwing
exceptions, `Message` must contain
a __format recognised format specifier: the argument `Val` is inserted into
the error message according to the specifier used.
For example if `Message` contains a "%1%" then it is replaced by the value of
`Val` to the full precision of T, where as "%.3g" would contain the value of
`Val` to 3 digits. See the __format documentation for more details.
[heading:pole_error Evaluation at a pole]
When a special function is passed an argument that is at a pole
without a well defined residual value, then the function returns
the result of:
boost::math::policies::raise_pole_error<T>(FunctionName, Message, Val, __Policy);
Where
`T` is the floating point type passed to the function, `FunctionName` is the
name of the function, `Message` is an error message describing the problem,
`Val` is the value of the argument that is at a pole, and __Policy is the
current policy in use for the function that was called.
The default behaviour of this function is to throw a std::domain_error exception.
But __error_policy can be used to change this, for example to `ignore_error`
and return NaN.
Note that in order to support information-rich error messages when throwing
exceptions, `Message` must contain
a __format recognised format specifier: the argument `val` is inserted into
the error message according to the specifier used.
For example if `Message` contains a "%1%" then it is replaced by the value of
`val` to the full precision of T, where as "%.3g" would contain the value of
`val` to 3 digits. See the __format documentation for more details.
[heading:overflow_error Numeric Overflow]
When the result of a special function is too large to fit in the argument
floating-point type, then the function returns the result of:
boost::math::policies::raise_overflow_error<T>(FunctionName, Message, __Policy);
Where
`T` is the floating-point type passed to the function, `FunctionName` is the
name of the function, `Message` is an error message describing the problem,
and __Policy is the current policy
in use for the function that was called.
The default policy for this function is that `std::overflow_error`
C++ exception is thrown. But if, for example, an `ignore_error` policy
is used, then returns `std::numeric_limits<T>::infinity()`.
In this situation if the type `T` doesn't support infinities,
the maximum value for the type is returned.
[heading:underflow_error Numeric Underflow]
If the result of a special function is known to be non-zero, but the
calculated result underflows to zero, then the function returns the result of:
boost::math::policies::raise_underflow_error<T>(FunctionName, Message, __Policy);
Where
`T` is the floating point type passed to the function, `FunctionName` is the
name of the function, `Message` is an error message describing the problem,
and __Policy is the current policy
in use for the called function.
The default version of this function returns zero.
But with another policy, like `throw_on_error`,
throws an `std::underflow_error` C++ exception.
[heading:denorm_error Denormalisation Errors]
If the result of a special function is a denormalised value /z/ then the function
returns the result of:
boost::math::policies::raise_denorm_error<T>(z, FunctionName, Message, __Policy);
Where
`T` is the floating point type passed to the function, `FunctionName` is the
name of the function, `Message` is an error message describing the problem,
and __Policy is the current policy
in use for the called function.
The default version of this function returns /z/.
But with another policy, like `throw_on_error`
throws an `std::underflow_error` C++ exception.
[heading:evaluation_error Evaluation Errors]
When a special function calculates a result that is known to be erroneous,
or where the result is incalculable then it calls:
boost::math::policies::raise_evaluation_error<T>(FunctionName, Message, Val, __Policy);
Where
`T` is the floating point type passed to the function, `FunctionName` is the
name of the function, `Message` is an error message describing the problem,
`Val` is the erroneous value,
and __Policy is the current policy
in use for the called function.
The default behaviour of this function is to throw a `boost::math::evaluation_error`.
Note that in order to support information rich error messages when throwing
exceptions, `Message` must contain
a __format recognised format specifier: the argument `val` is inserted into
the error message according to the specifier used.
For example if `Message` contains a "%1%" then it is replaced by the value of
`val` to the full precision of T, where as "%.3g" would contain the value of
`val` to 3 digits. See the __format documentation for more details.
[heading:indeterminate_result_error Indeterminate Result Errors]
When the result of a special function is indeterminate for the value that was
passed to it, then the function returns the result of:
boost::math::policies::raise_overflow_error<T>(FunctionName, Message, Val, Default, __Policy);
Where
`T` is the floating-point type passed to the function, `FunctionName` is the
name of the function, `Message` is an error message describing the problem,
Val is the value for which the result is indeterminate, Default is an
alternative default result that must be returned for `ignore_error` and
`errno_on_erro` policies, and __Policy is the current policy in use for the
function that was called.
The default policy for this function is `ignore_error`: note that this error
type is reserved for situations where the result is mathematically
undefined or indeterminate, but there is none the less a convention for what
the result should be: for example the C99 standard specifies that the result
of 0[super 0] is 1, even though the result is actually mathematically indeterminate.
[heading:rounding_error Rounding Errors]
When one of the rounding functions __round, __trunc or __modf is
called with an argument that has no integer representation, or
is too large to be represented in the result type then the
value returned is the result of a call to:
boost::math::policies::raise_rounding_error<T>(FunctionName, Message, Val, __Policy);
Where
`T` is the floating point type passed to the function, `FunctionName` is the
name of the function, `Message` is an error message describing the problem,
`Val` is the erroneous argument,
and __Policy is the current policy in use for the called function.
The default behaviour of this function is to throw a `boost::math::rounding_error`.
Note that in order to support information rich error messages when throwing
exceptions, `Message` must contain
a __format recognised format specifier: the argument `val` is inserted into
the error message according to the specifier used.
For example if `Message` contains a "%1%" then it is replaced by the value of
`val` to the full precision of T, where as "%.3g" would contain the value of
`val` to 3 digits. See the __format documentation for more details.
[heading:checked_narrowing_cast Errors from typecasts]
Many special functions evaluate their results at a higher precision
than their arguments in order to ensure full machine precision in
the result: for example, a function passed a float argument may evaluate
its result using double precision internally. Many of the errors listed
above may therefore occur not during evaluation, but when converting
the result to the narrower result type. The function:
template <class T, class __Policy, class U>
T checked_narrowing_cast(U const& val, const char* function);
Is used to perform these conversions, and will call the error handlers
listed above on [link math_toolkit.error_handling.overflow_error overflow],
[link math_toolkit.error_handling.underflow_error underflow] or [link math_toolkit.error_handling.denorm_error denormalisation].
[endsect][/section:error_handling Error Handling]
[/
Copyright 2006 - 2012 John Maddock and Paul A. Bristow.
Distributed under the Boost Software License, Version 1.0.
(See accompanying file LICENSE_1_0.txt or copy at
http://www.boost.org/LICENSE_1_0.txt).
]