w4kek/WSJT-X
1
0
Fork 0
mirror of https://github.com/saitohirga/WSJT-X.git synced 2024-11-23 20:58:55 -05:00
Code Issues Packages Projects Releases Wiki Activity
d6fe8612fa
WSJT-X/CMakeLists.txt
Bill Somerville 35cde3e35a Install a Hamlib-3 version of rigctld with WSJT-X. 
Because  WSJT-X currently  uses Hamlib-3  (statically linked)  it also
needs a  version of  rigctld with Hamlib-3  statically linked  for any
user that  wishes to  use the  "Hamlib NET  rigctld" CAT  interface to
remotly access a rig via IP using the Hamlib network control protocol.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@4297 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2014-09-10 16:43:24 +00:00

921 lines
27 KiB
CMake
Raw Blame History

cmake_minimum_required (VERSION 2.8.9 FATAL_ERROR)
project (wsjtx C CXX Fortran)
#
# project information
#
set (PROJECT_VENDOR "Joe Taylor, K1JT")
set (PROJECT_CONTACT "Joe Taylor <k1jt@arrl.net>")
set (PROJECT_COPYRIGHT "Copyright (C) 2001-2014 by Joe Taylor, K1JT")
set (PROJECT_HOMEPAGE "http://www.physics.princeton.edu/pulsar/K1JT/wsjtx.html")
set (PROJECT_MANUAL "http://www.physics.princeton.edu/pulsar/K1JT/wsjtx-doc/wsjtx-main.html")
set (PROJECT_SUMMARY_DESCRIPTION "WSJT-X - JT9 and JT65 Modes for LF, MF and HF Amateur Radio.")
set (PROJECT_DESCRIPTION "${PROJECT_SUMMARY_DESCRIPTION}
WSJT-X implements JT9, a new mode designed especially for the LF, MF,
and HF bands, as well as the popular mode JT65. Both modes were
designed for making reliable, confirmed QSOs under extreme weak-signal
conditions. They use nearly identical message structure and source
encoding. JT65 was designed for EME (“moonbounce”) on the VHF/UHF
bands and has also proved very effective for worldwide QRP
communication at HF; in contrast, JT9 is optimized for HF and lower
frequencies. JT9 is about 2 dB more sensitive than JT65A while using
less than 10% of the bandwidth. World-wide QSOs are possible with
power levels of a few watts and compromise antennas. A 2 kHz slice of
spectrum is essentially full when occupied by ten JT65 signals. As
many as 100 JT9 signals can fit into the same space, without overlap.
.
WSJT-X offers a “bi-lingual“ operating mode in which you can transmit
and receive JT65 and JT9 signals, switching between modes
automatically as needed. Displayed bandwidth can be as large as 5
kHz. If your receiver has as upper-sideband filter at least 4 kHz
wide, you can have all the typical JT65 and JT9 activity on screen at
once, available for making QSOs with a click of the mouse. Even with
standard SSB-width IF filters, switching between JT65 and JT9 modes is
quick and convenient. Be sure to read the online WSJT-X User's
Guide.")
set (CMAKE_MODULE_PATH ${CMAKE_MODULE_PATH} ${PROJECT_SOURCE_DIR}/CMake/Modules)
include (${PROJECT_SOURCE_DIR}/CMake/VersionCompute.cmake)
# make sure that the default configuration is a RELEASE
if (NOT CMAKE_BUILD_TYPE)
set (CMAKE_BUILD_TYPE RELEASE CACHE STRING
"Choose the type of build, options are: None Debug Release."
FORCE)
endif (NOT CMAKE_BUILD_TYPE)
if (CMAKE_BUILD_TYPE MATCHES "[Dd][Ee][Bb][Uu][Gg]")
set (is_debug_build 1)
endif ()
#
# Options & features
#
# Some of these directly effect compilation by being defined in
# wsjtx_config.h.in which makes them available to the C/C++
# pre-processor.
#
include (CMakeDependentOption)
option (UPDATE_TRANSLATIONS "Update source translation translations/*.ts
files (WARNING: make clean will delete the source .ts files! Danger!)")
option (WSJT_SHARED_RUNTIME "Debugging option that allows running from a shared Cloud directory.")
option (WSJT_QDEBUG_TO_FILE "Redirect Qt debuging messages to a trace file.")
option (WSJT_QDEBUG_IN_RELEASE "Leave Qt debugging statements in Release configuration.")
option (WSJT_TRACE_CAT "Debugging option that turns on CAT diagnostics.")
option (WSJT_TRACE_CAT_POLLS "Debugging option that turns on CAT diagnostics during polling.")
option (WSJT_HAMLIB_TRACE "Debugging option that turns on full Hamlib internal diagnostics.")
option (WSJT_STANDARD_FILE_LOCATIONS "All non-installation files located in \"Standard\" platfom specific locations." ON)
option (WSJT_SOFT_KEYING "Apply a ramp to CW keying envelope to reduce transients." ON)
option (WSJT_SKIP_MANPAGES "Skip *nix manpage generation")
CMAKE_DEPENDENT_OPTION (WSJT_ENABLE_EXPERIMENTAL_FEATURES "Enable features not fully ready for public releases." ON
"is_debug_build" OFF)
#
# install locations
#
set (WSJT_BIN_DESTINATION bin)
set (WSJT_LIB_DESTINATION lib)
set (WSJT_SHARE_DESTINATION share/wsjtx)
set (WSJT_DOC_DESTINATION share/doc/wsjtx)
set (WSJT_MANPAGE_DESTINATION share)
set (WSJT_PLUGIN_DESTINATION lib/plugins)
set (WSJT_QT_CONF_DESTINATION bin)
#
# Project sources
#
set (wsjt_qt_CXXSRCS
NetworkServerLookup.cpp
revision_utils.cpp
WFPalette.cpp
Radio.cpp
Bands.cpp
FrequencyList.cpp
StationList.cpp
FrequencyLineEdit.cpp
FrequencyItemDelegate.cpp
ForeignKeyDelegate.cpp
LiveFrequencyValidator.cpp
GetUserId.cpp
TraceFile.cpp
AudioDevice.cpp
Transceiver.cpp
TransceiverBase.cpp
EmulateSplitTransceiver.cpp
TransceiverFactory.cpp
PollingTransceiver.cpp
HamlibTransceiver.cpp
HRDTransceiver.cpp
DXLabSuiteCommanderTransceiver.cpp
)
set (ConfigTest_CXXSRCS
Configuration.cpp
TestConfiguration.cpp
ConfigTest.cpp
)
set (jt9_CXXSRCS
lib/ipcomm.cpp
)
set (wsjtx_CXXSRCS
logbook/adif.cpp
logbook/countrydat.cpp
logbook/countriesworked.cpp
logbook/logbook.cpp
psk_reporter.cpp
Modulator.cpp
Detector.cpp
logqso.cpp
displaytext.cpp
decodedtext.cpp
getfile.cpp
soundout.cpp
soundin.cpp
meterwidget.cpp
signalmeter.cpp
plotter.cpp
widegraph.cpp
about.cpp
astro.cpp
mainwindow.cpp
Configuration.cpp
main.cpp
)
if (WIN32)
set (ConfigTest_CXXSRCS
${ConfigTest_CXXSRCS}
OmniRigTransceiver.cpp
)
set (wsjt_CXXSRCS
${wsjt_CXXSRCS}
killbyname.cpp
)
set (wsjt_qt_CXXSRCS
${wsjt_qt_CXXSRCS}
OmniRigTransceiver.cpp
)
endif (WIN32)
set (wsjt_FSRCS
lib/afc65b.f90
lib/afc9.f90
lib/analytic.f90
lib/astro.f90
lib/astrosub.f90
lib/astro0.f90
lib/azdist.f90
lib/baddata.f90
lib/ccf2.f90
lib/ccf65.f90
lib/chkhist.f90
lib/chkmsg.f90
lib/chkss2.f90
lib/coord.f90
lib/db.f90
lib/dcoord.f90
lib/decode65a.f90
lib/decode65b.f90
lib/decode9.f90
lib/decoder.f90
lib/deg2grid.f90
lib/demod64a.f90
lib/determ.f90
lib/dot.f90
lib/downsam9.f90
lib/encode232.f90
lib/entail.f90
lib/extract.F90
lib/geocentric.f90
lib/f77_wisdom.f90
lib/fano232.f90
lib/fchisq.f90
lib/fchisq65.f90
lib/fil3.f90
lib/fil4.f90
lib/fil6521.f90
lib/filbig.f90
lib/fillcom.f90
lib/flat1.f90
lib/flat2.f90
lib/flat3.f90
lib/flat65.f90
lib/four2a.f90
lib/gen65.f90
lib/genjt9.f90
lib/geodist.f90
lib/getlags.f90
lib/getpfx1.f90
lib/getpfx2.f90
lib/graycode.f90
lib/graycode65.f90
lib/grid2deg.f90
lib/grid2k.f90
lib/grid2n.f90
lib/indexx.f90
lib/interleave63.f90
lib/interleave9.f90
lib/jt65a.f90
lib/k2grid.f90
lib/moon2.f90
lib/moondop.f90
lib/morse.f90
lib/move.f90
lib/n2grid.f90
lib/nchar.f90
lib/options.f90
lib/packbits.f90
lib/packcall.f90
lib/packgrid.f90
lib/packmsg.f90
lib/packtext.f90
lib/pctile.f90
lib/peakdt9.f90
lib/pfxdump.f90
lib/polfit.f90
lib/prog_args.f90
lib/sec_midn.f90
lib/setup65.f90
lib/sleep_msec.f90
lib/smo.f90
lib/smo121.f90
lib/softsym.f90
lib/sort.f90
lib/ssort.f90
lib/stdmsg.f90
lib/sun.f90
lib/symspec.f90
lib/symspec2.f90
lib/symspec65.f90
lib/sync9.f90
lib/timer.f90
lib/tm2.f90
lib/toxyz.f90
lib/twkfreq.f90
lib/twkfreq65.f90
lib/unpackbits.f90
lib/unpackcall.f90
lib/unpackgrid.f90
lib/unpackmsg.f90
lib/unpacktext.f90
lib/zplot9.f90
)
set (wsjt_CSRCS
lib/decode_rs.c
lib/encode_rs.c
lib/gran.c
lib/igray.c
lib/init_rs.c
lib/tmoonsub.c
lib/usleep.c
lib/wrapkarn.c
)
set (ConfigTest_UISRCS
TestConfiguration.ui
Configuration.ui
)
set (wsjt_qt_UISRCS
wf_palette_design_dialog.ui
)
set (wsjtx_UISRCS
mainwindow.ui
about.ui
astro.ui
widegraph.ui
logqso.ui
Configuration.ui
)
set (all_C_and_CXXSRCS
${wsjt_CSRCS}
${wsjt_CXXSRCS}
${wsjt_qt_CXXSRCS}
${jt9_CXXSRCS}
${ConfigTest_CXXSRCS}
${wsjtx_CXXSRCS}
)
if (APPLE)
set (WSJTX_ICON_FILE ${CMAKE_PROJECT_NAME}.icns)
set (ICONSRCS
icons/Darwin/${CMAKE_PROJECT_NAME}.iconset/icon_16x16.png
icons/Darwin/${CMAKE_PROJECT_NAME}.iconset/icon_16x16@2x.png
icons/Darwin/${CMAKE_PROJECT_NAME}.iconset/icon_32x32.png
icons/Darwin/${CMAKE_PROJECT_NAME}.iconset/icon_32x32@2x.png
icons/Darwin/${CMAKE_PROJECT_NAME}.iconset/icon_128x128.png
icons/Darwin/${CMAKE_PROJECT_NAME}.iconset/icon_128x128@2x.png
icons/Darwin/${CMAKE_PROJECT_NAME}.iconset/icon_256x256.png
icons/Darwin/${CMAKE_PROJECT_NAME}.iconset/icon_256x256@2x.png
icons/Darwin/${CMAKE_PROJECT_NAME}.iconset/icon_512x512.png
icons/Darwin/${CMAKE_PROJECT_NAME}.iconset/icon_512x512@2x.png
)
add_custom_command (
OUTPUT ${WSJTX_ICON_FILE}
COMMAND iconutil -c icns --output "${CMAKE_BINARY_DIR}/${WSJTX_ICON_FILE}" "${CMAKE_SOURCE_DIR}/icons/Darwin/${CMAKE_PROJECT_NAME}.iconset"
DEPENDS ${ICONSRCS}
COMMENT "Building Icons"
)
endif (APPLE)
set_source_files_properties (${WSJTX_ICON_FILE} PROPERTIES MACOSX_PACKAGE_LOCATION Resources)
if (NOT WSJT_QDEBUG_IN_RELEASE)
set_directory_properties (PROPERTIES COMPILE_DEFINITIONS_RELEASE "QT_NO_DEBUG_OUTPUT;QT_NO_WARNING_OUTPUT")
set_directory_properties (PROPERTIES COMPILE_DEFINITIONS_MINSIZEREL "QT_NO_DEBUG_OUTPUT;QT_NO_WARNING_OUTPUT")
endif (NOT WSJT_QDEBUG_IN_RELEASE)
set_property (SOURCE ${all_C_and_CXXSRCS} APPEND PROPERTY COMPILE_FLAGS "-include wsjtx_config.h")
set_property (SOURCE ${all_C_and_CXXSRCS} APPEND PROPERTY OBJECT_DEPENDS wsjtx_config.h)
if (WIN32)
# generate the OmniRig COM interface source
find_program (DUMPCPP dumpcpp)
if (DUMPCPP-NOTFOUND)
message (FATAL_ERROR "dumpcpp tool not found")
endif (DUMPCPP-NOTFOUND)
execute_process (
COMMAND ${DUMPCPP} -getfile {4FE359C5-A58F-459D-BE95-CA559FB4F270}
OUTPUT_VARIABLE AXSERVER
OUTPUT_STRIP_TRAILING_WHITESPACE
)
string (STRIP "${AXSERVER}" AXSERVER)
if (NOT AXSERVER)
message (FATAL_ERROR "You need to install OmniRig on this computer")
endif (NOT AXSERVER)
string (REPLACE "\"" "" AXSERVER ${AXSERVER})
file (TO_CMAKE_PATH ${AXSERVER} AXSERVERSRCS)
endif (WIN32)
if (POLICY CMP0020)
cmake_policy (SET CMP0020 NEW) # link to Qt winmain on Windows
endif (POLICY CMP0020)
#
# decide on platform specifc packing and fixing up
#
if (APPLE)
set (WSJTX_BUNDLE_VERSION ${wsjtx_VERSION})
# make sure CMAKE_INSTALL_PREFIX ends in /
string (LENGTH "${CMAKE_INSTALL_PREFIX}" LEN)
math (EXPR LEN "${LEN} -1" )
string (SUBSTRING "${CMAKE_INSTALL_PREFIX}" ${LEN} 1 ENDCH)
if (NOT "${ENDCH}" STREQUAL "/")
set (CMAKE_INSTALL_PREFIX "${CMAKE_INSTALL_PREFIX}/")
endif ()
# install inside bundle
# set (CMAKE_INSTALL_PREFIX "${CMAKE_INSTALL_PREFIX}wsjtx.app")
set (WSJT_PLUGIN_DESTINATION ${CMAKE_PROJECT_NAME}.app/Contents/PlugIns)
set (WSJT_QT_CONF_DESTINATION ${CMAKE_PROJECT_NAME}.app/Contents/Resources)
set (WSJT_SHARE_DESTINATION ${CMAKE_PROJECT_NAME}.app/Contents/Resources)
set (WSJT_DOC_DESTINATION ${CMAKE_PROJECT_NAME}.app/Contents/Resources)
set (WSJT_MANPAGE_DESTINATION ${CMAKE_PROJECT_NAME}.app/Contents/Resources)
set (WSJT_BIN_DESTINATION ${CMAKE_PROJECT_NAME}.app/Contents/MacOS)
endif (APPLE)
#
# C & C++ setup
#
set (CMAKE_C_FLAGS "${CMAKE_C_FLAGS} -Wall -Wextra")
set (CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -Wall -Wextra -std=c++11 -fexceptions -frtti")
if (WIN32)
set (CMAKE_C_FLAGS "${CMAKE_C_FLAGS} -fno-keep-inline-dllexport")
endif (WIN32)
if (APPLE)
set (CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -stdlib=libc++")
else (APPLE)
set (CMAKE_C_FLAGS "${CMAKE_C_FLAGS} -pthread")
set (CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -pthread")
endif (APPLE)
#
# Fortran setup
#
set (General_FFLAGS "-fbounds-check -Wall -Wno-conversion -fno-second-underscore")
# FFLAGS depend on the compiler
get_filename_component (Fortran_COMPILER_NAME ${CMAKE_Fortran_COMPILER} NAME)
if (Fortran_COMPILER_NAME MATCHES "gfortran.*")
# gfortran
set (CMAKE_Fortran_FLAGS_RELEASE "-funroll-all-loops -fno-f2c -O3 ${General_FFLAGS}")
set (CMAKE_Fortran_FLAGS_DEBUG "-fno-f2c -O0 -g ${General_FFLAGS}")
elseif (Fortran_COMPILER_NAME MATCHES "ifort.*")
# ifort (untested)
set (CMAKE_Fortran_FLAGS_RELEASE "-f77rtl -O3 ${General_FFLAGS}")
set (CMAKE_Fortran_FLAGS_DEBUG "-f77rtl -O0 -g ${General_FFLAGS}")
elseif (Fortran_COMPILER_NAME MATCHES "g77")
# g77
set (CMAKE_Fortran_FLAGS_RELEASE "-funroll-all-loops -fno-f2c -O3 -m32 ${General_FFLAGS}")
set (CMAKE_Fortran_FLAGS_DEBUG "-fno-f2c -O0 -g -m32 ${General_FFLAGS}")
else (Fortran_COMPILER_NAME MATCHES "gfortran.*")
message ("CMAKE_Fortran_COMPILER full path: " ${CMAKE_Fortran_COMPILER})
message ("Fortran compiler: " ${Fortran_COMPILER_NAME})
message ("No optimized Fortran compiler flags are known, we just try -O2...")
set (CMAKE_Fortran_FLAGS_RELEASE "-O2 ${General_FFLAGS}")
set (CMAKE_Fortran_FLAGS_DEBUG "-O0 -g ${General_FFLAGS}")
endif (Fortran_COMPILER_NAME MATCHES "gfortran.*")
#
# setup and test Fortran C/C++ interaction
#
include (FortranCInterface)
FortranCInterface_VERIFY (CXX QUIET)
FortranCInterface_HEADER (FC.h MACRO_NAMESPACE "FC_" SYMBOL_NAMESPACE "FC_"
SYMBOLS )
#
# sort out pre-requisites
#
#
# Setup RPATH so that built executable targets will run in both the
# build tree and the install location without having to set a
# (DYLD|LD)_LIBRARY_PATH override.
#
# use the full RPATH of the build tree
set (CMAKE_SKIP_BUILD_RPATH FALSE)
# when building, don't use the install RPATH, it will still be used
# later on in the install phase
set (CMAKE_BUILD_WITH_INSTALL_RPATH FALSE)
# set (CMAKE_INSTALL_RPATH "${CMAKE_INSTALL_PREFIX}/${WSJT_LIB_DESTINATION}")
# add the automaticaly determined parts of the RPATH which point to
# directories outside of the build tree to the install RPATH
set (CMAKE_INSTALL_RPATH_USE_LINK_PATH TRUE)
# the RPATH to be used when installing, but only if it's not a system
# directory
# list (FIND CMAKE_PLATFORM_IMPLICIT_LINK_DIRECTORIES "${CMAKE_INSTALL_PREFIX}/${WSJT_LIB_DESTINATION}" isSystemDir)
# if ("${isSystemDir}" STREQUAL "-1")
# set (CMAKE_INSTALL_RPATH "${CMAKE_INSTALL_PREFIX}/${WSJT_LIB_DESTINATION}")
# endif ("${isSystemDir}" STREQUAL "-1")
set (QT_NEED_RPATH FALSE)
if (NOT "${QT_LIBRARY_DIR}" STREQUAL "/lib" AND NOT "${QT_LIBRARY_DIR}" STREQUAL "/usr/lib" AND NOT "${QT_LIBRARY_DIR}" STREQUAL "/lib64" AND NOT "${QT_LIBRARY_DIR}" STREQUAL "/usr/lib64")
set (QT_NEED_RPATH TRUE)
endif ()
#
# fftw3 single precsion library
#
find_package (FFTW3 COMPONENTS single REQUIRED)
include_directories (${FFTW3_INCLUDE_DIRS})
#
# libhamlib setup
#
find_package (hamlib 3 REQUIRED)
include_directories (${hamlib_INCLUDE_DIRS})
if (hamlib_STATIC_LIBRARY)
# static link hamlib if archive library available
set (hamlib_LIBRARY "${hamlib_STATIC_LIBRARY}")
set (hamlib_LIBRARIES "${hamlib_STATIC_LIBRARIES}")
endif ()
find_program (RIGCTLD_EXE rigctld)
message (STATUS "hamlib_INCLUDE_DIRS: ${hamlib_INCLUDE_DIRS}")
message (STATUS "hamlib_LIBRARY: ${hamlib_LIBRARY}")
message (STATUS "hamlib_LIBRARIES: ${hamlib_LIBRARIES}")
message (STATUS "hamlib_STATIC_LIBRARY: ${hamlib_STATIC_LIBRARY}")
message (STATUS "hamlib_STATIC_LIBRARIES: ${hamlib_STATIC_LIBRARIES}")
# if (WIN32)
# find_library (hamlib_RUNTIME NAMES hamlib hamlib-2 PATH_SUFFIXES bin)
# get_filename_component (_hamlib_runtime_path "${hamlib_RUNTIME}" PATH)
# file (GLOB hamlib_BACKENDS ${_hamlib_runtime_path}/hamlib*.dll)
# find_library (usb_RUNTIME NAMES usb0 PATH_SUFFIXES bin)
# endif (WIN32)
#
# Qt5 setup
#
# Widgets finds its own dependencies.
find_package (Qt5Widgets 5 REQUIRED)
find_package (Qt5Multimedia 5 REQUIRED)
if (WIN32)
add_definitions (-DQT_NEEDS_QTMAIN)
find_package (Qt5AxContainer REQUIRED)
endif (WIN32)
#
# stuff only qmake can tell us
#
get_target_property (QMAKE_EXECUTABLE Qt5::qmake LOCATION)
function (QUERY_QMAKE VAR RESULT)
exec_program (${QMAKE_EXECUTABLE} ARGS "-query ${VAR}" RETURN_VALUE return_code OUTPUT_VARIABLE output)
if (NOT return_code)
file (TO_CMAKE_PATH "${output}" output)
set (${RESULT} ${output} PARENT_SCOPE)
endif (NOT return_code)
message (STATUS "Asking qmake for ${RESULT} and got ${output}")
endfunction (QUERY_QMAKE)
query_qmake (QT_INSTALL_PLUGINS QT_PLUGINS_DIR)
query_qmake (QT_INSTALL_IMPORTS QT_IMPORTS_DIR)
query_qmake (QT_HOST_DATA QT_DATA_DIR)
set (QT_MKSPECS_DIR ${QT_DATA_DIR}/mkspecs)
# Tell CMake to run moc when necessary
set (CMAKE_AUTOMOC ON)
# don't use Qt "keywords" signal, slot, emit in generated files to
# avoid compatability issue with other libraries
# ADD_DEFINITIONS (-DQT_NO_KEYWORDS)
# ADD_DEFINITIONS (-DUNICODE) #as per qmake
# As moc files are generated in the binary dir, tell CMake to always
# look for includes there:
set (CMAKE_INCLUDE_CURRENT_DIR ON)
# project definitions
add_definitions (-DQT5 -DCMAKE_BUILD -DBIGSYM=1)
if (CMAKE_HOST_UNIX)
add_definitions (-DUNIX)
elseif (CMAKE_HOST_WIN32)
add_definitions (-DWIN32)
endif ()
#
# fetch and validate kvasd
#
add_custom_command (
OUTPUT contrib/kvasd${CMAKE_EXECUTABLE_SUFFIX}
COMMAND ${CMAKE_COMMAND} -D SYSTEM_NAME=${CMAKE_SYSTEM_NAME} -D EXECUTABLE_SUFFIX=${CMAKE_EXECUTABLE_SUFFIX} -P ${CMAKE_SOURCE_DIR}/CMake/download_kvasd.cmake
DEPENDS CMake/download_kvasd.cmake
COMMENT "Downloading kvasd for ${CMAKE_SYSTEM_NAME}"
VERBATIM
)
# UI generation
qt5_wrap_ui (wsjt_qt_GENUISRCS ${wsjt_qt_UISRCS})
qt5_wrap_ui (ConfigTest_GENUISRCS ${ConfigTest_UISRCS})
qt5_wrap_ui (wsjtx_GENUISRCS ${wsjtx_UISRCS})
# Resource generation
qt5_add_resources (wsjtx_RESOURCES_RCC wsjtx.qrc)
# AX COM servers
if (WIN32)
include (QtAxMacros)
wrap_ax_server (GENAXSRCS ${AXSERVERSRCS})
endif (WIN32)
#
# targets
#
# build a library of package functionality
add_library (wsjt STATIC ${wsjt_CSRCS} ${wsjt_CXXSRCS} ${wsjt_FSRCS})
# build a library of package Qt functionality
add_library (wsjt_qt STATIC ${wsjt_qt_CXXSRCS} ${wsjt_qt_GENUISRCS} ${GENAXSRCS})
qt5_use_modules (wsjt_qt Widgets OpenGL Network)
if (WIN32)
qt5_use_modules (wsjt_qt AxContainer AxBase)
endif (WIN32)
add_executable (jt9sim lib/jt9sim.f90 wsjtx.rc)
target_link_libraries (jt9sim wsjt)
add_executable (jt65code lib/jt65code.f90 wsjtx.rc)
target_link_libraries (jt65code wsjt)
add_executable (jt9code lib/jt9code.f90 wsjtx.rc)
target_link_libraries (jt9code wsjt)
add_executable (jt9 lib/jt9.f90 lib/jt9a.f90 lib/jt9b.f90 lib/jt9c.f90 ${jt9_CXXSRCS} wsjtx.rc)
target_link_libraries (jt9 wsjt ${FFTW3_LIBRARIES})
qt5_use_modules (jt9 Core)
# build configuration dialog and transceiver interface test application
#add_executable (ConfigTest ${ConfigTest_CXXSRCS} ${ConfigTest_GENUISRCS} wsjtx.rc)
#target_link_libraries (ConfigTest wsjt wsjt_qt ${hamlib_LIBRARIES})
#qt5_use_modules (ConfigTest Widgets OpenGL Network Multimedia)
# build the main application
add_executable (wsjtx WIN32 MACOSX_BUNDLE
${wsjtx_CXXSRCS}
${wsjtx_GENUISRCS}
wsjtx.rc
${WSJTX_ICON_FILE}
${wsjtx_RESOURCES_RCC}
contrib/kvasd${CMAKE_EXECUTABLE_SUFFIX}
)
qt5_use_modules (wsjtx Widgets OpenGL Network Multimedia)
if (UNIX)
if (NOT WSJT_SKIP_MANPAGES)
add_subdirectory (manpages)
endif (NOT WSJT_SKIP_MANPAGES)
if (NOT APPLE)
add_subdirectory (debian)
endif (NOT APPLE)
add_dependencies (wsjtx manpages debian)
endif (UNIX)
set_target_properties (wsjtx PROPERTIES
MACOSX_BUNDLE_INFO_STRING "${WSJTX_DESCRIPTION_SUMMARY}"
MACOSX_BUNDLE_ICON_FILE "${WSJTX_ICON_FILE}"
MACOSX_BUNDLE_BUNDLE_VERSION ${wsjtx_VERSION}
MACOSX_BUNDLE_SHORT_VERSION_STRING "v${wsjtx_VERSION}"
MACOSX_BUNDLE_LONG_VERSION_STRING "Version ${wsjtx_VERSION}"
MACOSX_BUNDLE_BUNDLE_NAME "WSJT-X"
MACOSX_BUNDLE_COPYRIGHT "${PROJECT_COPYRIGHT}"
)
target_link_libraries (wsjtx wsjt wsjt_qt ${hamlib_LIBRARIES} ${FFTW3_LIBRARIES})
if (WIN32)
set_target_properties (
wsjtx
# ConfigTest
PROPERTIES LINK_FLAGS_RELEASE "${LINKER_FLAGS_RELEASE} -mwindows"
)
endif (WIN32)
#
# installation
#
install (TARGETS wsjtx
RUNTIME DESTINATION ${WSJT_BIN_DESTINATION}
LIBRARY DESTINATION ${WSJT_LIB_DESTINATION}
BUNDLE DESTINATION .
#COMPONENT Runtime
)
install (TARGETS jt9 jt65code jt9code
RUNTIME DESTINATION ${WSJT_BIN_DESTINATION}
LIBRARY DESTINATION ${WSJT_LIB_DESTINATION}
BUNDLE DESTINATION ${WSJT_BIN_DESTINATION}
#COMPONENT Runtime
)
install (PROGRAMS
${CMAKE_BINARY_DIR}/contrib/kvasd${CMAKE_EXECUTABLE_SUFFIX} ${RIGCTLD_EXE}
DESTINATION ${WSJT_BIN_DESTINATION}
#COMPONENT Runtime
)
#
# uninstall support
#
configure_file (
"${CMAKE_CURRENT_SOURCE_DIR}/CMake/cmake_uninstall.cmake.in"
"${CMAKE_CURRENT_BINARY_DIR}/cmake_uninstall.cmake"
@ONLY)
add_custom_target (uninstall
"${CMAKE_COMMAND}" -P "${CMAKE_CURRENT_BINARY_DIR}/cmake_uninstall.cmake")
# creates svnversion.h using cmake script
add_custom_target (revisiontag
COMMAND ${CMAKE_COMMAND} -D SOURCE_DIR=${CMAKE_CURRENT_SOURCE_DIR} -D OUTPUT_DIR=${PROJECT_BINARY_DIR} -P ${CMAKE_CURRENT_SOURCE_DIR}/CMake/getsvn.cmake
COMMENT "Generating Subversion revision information"
VERBATIM
)
# explicitly say that the wsjt_qt depends on custom target, this is
# done indirectly so that the revisiontag target gets built exactly
# once per build
add_dependencies(wsjt_qt revisiontag)
#
# versioning and configuration
#
configure_file (
"${PROJECT_SOURCE_DIR}/wsjtx_config.h.in"
"${PROJECT_BINARY_DIR}/wsjtx_config.h"
)
include_directories ("${PROJECT_BINARY_DIR}")
if (NOT WIN32 AND NOT APPLE)
# install a desktop file so wsjtx appears in the application start
# menu with an icon
install (
FILES wsjtx.desktop
DESTINATION share/applications
#COMPONENT Runtime
)
install (
FILES icons/Unix/wsjtx_icon.png
DESTINATION share/pixmaps
#COMPONENT Runtime
)
endif (NOT WIN32 AND NOT APPLE)
#
# bundle fixup only done in Release or MinSizeRel configurations
#
if (NOT is_debug_build)
# get_target_property (QtCore_location Qt5::Core LOCATION)
# get_filename_component (QtCore_location ${QtCore_location} PATH)
# list (APPEND fixup_library_dirs ${QtCore_location})
if (APPLE)
set (CMAKE_POSTFLIGHT_SCRIPT
"${wsjtx_BINARY_DIR}/postflight.sh")
set (CMAKE_POSTUPGRADE_SCRIPT
"${wsjtx_BINARY_DIR}/postupgrade.sh")
configure_file ("${wsjtx_SOURCE_DIR}/postflight.sh.in"
"${wsjtx_BINARY_DIR}/postflight.sh")
configure_file ("${wsjtx_SOURCE_DIR}/postupgrade.sh.in"
"${wsjtx_BINARY_DIR}/postupgrade.sh")
endif ()
if (APPLE OR WIN32)
# install rules for including 3rd party libs such as Qt
# install a qt.conf file
install (CODE "
file (WRITE \"\$ENV{DESTDIR}\${CMAKE_INSTALL_PREFIX}/${WSJT_QT_CONF_DESTINATION}/qt.conf\"
\"[Paths]
\")
"
#COMPONENT Runtime
)
# if a system Qt is used (e.g. installed in /usr/lib/), it will not be included in the installation
set (fixup_exe "\${CMAKE_INSTALL_PREFIX}/${WSJT_BIN_DESTINATION}/${CMAKE_PROJECT_NAME}${CMAKE_EXECUTABLE_SUFFIX}")
#get_filename_component (hamlib_lib_dir ${hamlib_LIBRARIES} PATH)
if (APPLE)
# install required Qt plugins
install (
DIRECTORY
${QT_PLUGINS_DIR}/platforms
${QT_PLUGINS_DIR}/audio
DESTINATION ${WSJT_PLUGIN_DESTINATION}
CONFIGURATIONS Release MinSizeRel
#COMPONENT Runtime
FILES_MATCHING PATTERN "*${CMAKE_SHARED_LIBRARY_SUFFIX}"
PATTERN "*minimal*${CMAKE_SHARED_LIBRARY_SUFFIX}" EXCLUDE
PATTERN "*offscreen*${CMAKE_SHARED_LIBRARY_SUFFIX}" EXCLUDE
PATTERN "*_debug${CMAKE_SHARED_LIBRARY_SUFFIX}" EXCLUDE
)
# install (
# DIRECTORY
# ${QT_PLUGINS_DIR}/platforms
# ${QT_PLUGINS_DIR}/audio
# DESTINATION ${WSJT_PLUGIN_DESTINATION}
# CONFIGURATIONS Debug
# #COMPONENT Runtime
# FILES_MATCHING PATTERN "*_debug${CMAKE_SHARED_LIBRARY_SUFFIX}"
# PATTERN "*minimal*${CMAKE_SHARED_LIBRARY_SUFFIX}" EXCLUDE
# PATTERN "*offscreen*${CMAKE_SHARED_LIBRARY_SUFFIX}" EXCLUDE
# )
# add plugins path for Mac Bundle
install (CODE "
file (APPEND \"\$ENV{DESTDIR}\${CMAKE_INSTALL_PREFIX}/${WSJT_QT_CONF_DESTINATION}/qt.conf\"
\"Plugins = Plugins
\")
"
#COMPONENT Runtime
)
endif (APPLE)
if (WIN32)
# DLL directory
#set (hamlib_lib_dir ${hamlib_lib_dir}/../bin)
get_filename_component (fftw_lib_dir ${FFTW3F_LIBRARY} PATH)
list (APPEND fixup_library_dirs ${fftw_lib_dir})
# install required Qt plugins
install (
DIRECTORY
${QT_PLUGINS_DIR}/platforms
DESTINATION ${WSJT_PLUGIN_DESTINATION}
CONFIGURATIONS Release MinSizeRel
#COMPONENT Runtime
FILES_MATCHING PATTERN "*${CMAKE_SHARED_LIBRARY_SUFFIX}"
PATTERN "*minimal*${CMAKE_SHARED_LIBRARY_SUFFIX}" EXCLUDE
PATTERN "*offscreen*${CMAKE_SHARED_LIBRARY_SUFFIX}" EXCLUDE
PATTERN "*d${CMAKE_SHARED_LIBRARY_SUFFIX}" EXCLUDE
)
# install (
# DIRECTORY
# ${QT_PLUGINS_DIR}/platforms
# DESTINATION ${WSJT_PLUGIN_DESTINATION}
# CONFIGURATIONS Debug
# #COMPONENT Runtime
# FILES_MATCHING PATTERN "*d${CMAKE_SHARED_LIBRARY_SUFFIX}"
# PATTERN "*minimal*${CMAKE_SHARED_LIBRARY_SUFFIX}" EXCLUDE
# PATTERN "*offscreen*${CMAKE_SHARED_LIBRARY_SUFFIX}" EXCLUDE
# )
# add plugins path for WIN32
file (RELATIVE_PATH _plugins_path "${CMAKE_INSTALL_PREFIX}/${WSJT_QT_CONF_DESTINATION}" "${CMAKE_INSTALL_PREFIX}/${WSJT_PLUGIN_DESTINATION}")
install (CODE "
file (APPEND \"\$ENV{DESTDIR}\${CMAKE_INSTALL_PREFIX}/${WSJT_QT_CONF_DESTINATION}/qt.conf\"
\"Plugins = ${_plugins_path}
\")
"
#COMPONENT Runtime
)
# set (gp_tool "objdump") # we want MinGW tool - not MSVC (See GetPrerequisites.cmake)
endif (WIN32)
#list (APPEND fixup_library_dirs ${hamlib_lib_dir})
list (APPEND fixup_library_dirs ${hamlib_LIBRARY_DIRS})
install (CODE "
file (GLOB_RECURSE QTPLUGINS
\"\$ENV{DESTDIR}\${CMAKE_INSTALL_PREFIX}/${WSJT_PLUGIN_DESTINATION}/*${CMAKE_SHARED_LIBRARY_SUFFIX}\")
include (BundleUtilities)
set (BU_CHMOD_BUNDLE_ITEMS ON)
set (gp_tool ${gp_tool})
message (STATUS \"fixup_exe: ${fixup_exe}\")
fixup_bundle (\"${fixup_exe}\" \"\${QTPLUGINS}\" \"${fixup_library_dirs}\")
"
#COMPONENT Runtime
)
endif (APPLE OR WIN32)
endif (NOT is_debug_build)
#
# packaging
#
set (CPACK_PACKAGE_NAME "${CMAKE_PROJECT_NAME}")
set (CPACK_PACKAGE_VERSION_MAJOR ${WSJTX_VERSION_MAJOR})
set (CPACK_PACKAGE_VERSION_MINOR ${WSJTX_VERSION_MINOR})
set (CPACK_PACKAGE_VERSION_PATCH ${WSJTX_VERSION_PATCH})
if (WIN32)
set (CPACK_GENERATOR "NSIS")
elseif (APPLE)
set (CPACK_GENERATOR "DragNDrop" "PackageMaker")
else ()
#
# Derive the correct filename for a Debian package because the DEB
# generator doesn't do this correctly at present.
#
string (TOLOWER "${CPACK_PACKAGE_NAME}" CPACK_PACKAGE_NAME_LOWERCASE)
find_program (DPKG_PROGRAM dpkg DOC "dpkg program of Debian-based systems")
if (DPKG_PROGRAM)
execute_process (
COMMAND ${DPKG_PROGRAM} --print-architecture
OUTPUT_VARIABLE CPACK_DEBIAN_PACKAGE_ARCHITECTURE
OUTPUT_STRIP_TRAILING_WHITESPACE
)
set (DEBIAN_PACKAGE_FILE_NAME
"${CPACK_PACKAGE_NAME_LOWERCASE}_${wsjtx_VERSION}_${CPACK_DEBIAN_PACKAGE_ARCHITECTURE}")
else (DPKG_PROGRAM)
set (DEBIAN_PACKAGE_FILE_NAME
"${CPACK_PACKAGE_NAME_LOWERCASE}_${wsjtx_VERSION}_${CMAKE_SYSTEM_NAME}")
endif (DPKG_PROGRAM)
set (CPACK_DEBIAN_PACKAGE_PACKAGE_SHLIBDEPS ON)
set (CPACK_GENERATOR "DEB" "RPM" "TGZ")
endif ()
configure_file ("${PROJECT_SOURCE_DIR}/CMakeCPackOptions.cmake.in"
"${PROJECT_BINARY_DIR}/CMakeCPackOptions.cmake" @ONLY)
set (CPACK_PROJECT_CONFIG_FILE "${PROJECT_BINARY_DIR}/CMakeCPackOptions.cmake")
include (CPack)
Reference in New Issue View Git Blame Copy Permalink