mirror of
https://github.com/saitohirga/WSJT-X.git
synced 2024-11-18 01:52:05 -05:00
2cfbb15b4f
The concept of a nominal receive and transmit frequency has been
introduced. This is used as a base frequency for Doppler correction,
frequency setting and reporting. The start up frequency is now zero
which is updated by the first rig control status report. This needs
more work to accommodate calling frequency plus working frequency
operation as is used for random MS operation etc..
The main window frequency display now shows the transmit dial
frequency while transmitting.
The mode changing logic sequence has been changed such that the rig is
correctly put into and taken out of split mode as required by the
target mode. This also avoids the "other" VFO having its frequency
changed when entering a mode that does not use split operating like
WSPR.
The main window band combo box edit may now be used to input an kHz
offset from the current MHz dial frequency. This is intended for
setting a sked or working frequency on the VHF and up bands. For
example the working frequency for 23cms might be set to 1296MHz and a
working frequency of 1296.3MHz would be selected by selecting the
23cms band with the combo box drop down list and then entering 300k
into the band combo box edit widget.
When using JT4 modes a CTRL+Click on the waterfall adjusts the nominal
frequency such that the frequency clicked on becomes the Tx and Rx
frequency using the fixed 1000Hz DF that JT4 modes use. This will
probably be extended to all QSO modes when used in VHF & up mode. This
assumes that 1000Hz is an optimal DF for both Tx and Rx and therefore
one can "net" to an off frequency, but visible on the waterfall,
caller with one click.
Improvements to OmniRig rig control including use of the serial port
control lines RTS or DTR, on the CAT serial port used by OmniRig, for
PTT control.
Incrementing transaction sequence numbers added to messages to and from
the rig control thread. This enables round trip status to be tracked
and associated with a request. For example a command that might cause
several asynchronous status updates can now be tracked in the
originating thread such that it is clear which updates are caused by
executing the request. This in turn allows updates to be held until
the request is complete i.e. the state is consistent with the results
of the request.
Messages to the rig control thread are now posted as a new state
(Transceiver::TransceiverState) object. The rig control thread tracks
requests and actions any differences between the prior requests and
the new state.
The rig control thread is now stored on the heap so that it can be
closed down and released as needed. Along with this the rig control
close down semantics are better defined avoiding some potential
deadlock situations.
If the rig is placed into split mode it will be reverted to simplex
mode when the rig connection is closed.
When using direct rig control via Hamlib, rigs that have A/B VFO
arrangements and no method to query the current VFO like many Icoms
and the Yaesu FT-817/857/897(D) series now have smarted frequency
updating requiring no VFO changes when changing the frequency. This
is particularly important when doing Tx Doppler correction to avoid
glitches.
The implementation of emulated split operating mode ("Fake It") is
simplified and improved.
A dummy Hamlib transceiver for PTT control on a separate port is no
long instantiated if CAT or VOX PTT control is selected.
The resolution and any rounding of the rig CAT frequency set and get
commands is determined automatically upon opening the rig connection.
This is needed to determine the rate of frequency updates for Doppler
tracking. It also allows the rig to be more accurately controlled.
Frequency calibration is calculated separately for the receive and
transmit frequencies.
Whether the rig modulation mode should be controlled is now a
constructor argument rather than being passed with individual rig
control requests.
Doppler shift correction is considerably enhanced with simpler
controls and much better rig control. A new mode of tracking called
"receive only" is introduced for those with rigs that cannot be QSY:ed
via CAT when transmitting. Such rigs have a Doppler correction
calculated for the middle of the next transmit period just before
transmission starts. While using Doppler tracking it is now possible
to adjust the sked frequency either using the new kHz offset feature
of the main window band combo box or by directly tuning the rig VFO
knob while holding down the CTRL key.
The astronomical data window that includes Doppler tracking control is
now opened and closed using a checkable menu item to avoid it being
accidentally closed.
Debug configuration rig control diagnostic messages now have a
facility argument for clearer and more standardized trace messages.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@6590 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
574 lines
17 KiB
C++
574 lines
17 KiB
C++
// -*- Mode: C++ -*-
|
|
#ifndef MAINWINDOW_H
|
|
#define MAINWINDOW_H
|
|
#ifdef QT5
|
|
#include <QtWidgets>
|
|
#else
|
|
#include <QtGui>
|
|
#endif
|
|
#include <QThread>
|
|
#include <QTimer>
|
|
#include <QDateTime>
|
|
#include <QList>
|
|
#include <QAudioDeviceInfo>
|
|
#include <QScopedPointer>
|
|
#include <QDir>
|
|
#include <QProgressDialog>
|
|
#include <QAbstractSocket>
|
|
#include <QHostAddress>
|
|
#include <QPointer>
|
|
|
|
#include "AudioDevice.hpp"
|
|
#include "commons.h"
|
|
#include "Radio.hpp"
|
|
#include "Modes.hpp"
|
|
#include "Configuration.hpp"
|
|
#include "WSPRBandHopping.hpp"
|
|
#include "Transceiver.hpp"
|
|
#include "DisplayManual.hpp"
|
|
#include "psk_reporter.h"
|
|
#include "logbook/logbook.h"
|
|
#include "decodedtext.h"
|
|
#include "commons.h"
|
|
#include "astro.h"
|
|
|
|
#define NUM_JT4_SYMBOLS 206 //(72+31)*2, embedded sync
|
|
#define NUM_JT65_SYMBOLS 126 //63 data + 63 sync
|
|
#define NUM_JT9_SYMBOLS 85 //69 data + 16 sync
|
|
#define NUM_WSPR_SYMBOLS 162 //(50+31)*2, embedded sync
|
|
#define NUM_ISCAT_SYMBOLS 1291 //30*11025/256
|
|
#define NUM_JTMSK_SYMBOLS 234 //(72+15+12)*2 + 3*11 sync + 3 f0-parity
|
|
|
|
#define NUM_CW_SYMBOLS 250
|
|
#define TX_SAMPLE_RATE 48000
|
|
|
|
extern int volatile itone[NUM_ISCAT_SYMBOLS]; //Audio tones for all Tx symbols
|
|
extern int volatile icw[NUM_CW_SYMBOLS]; //Dits for CW ID
|
|
|
|
//--------------------------------------------------------------- MainWindow
|
|
namespace Ui {
|
|
class MainWindow;
|
|
}
|
|
|
|
class QSettings;
|
|
class QNetworkAccessManager;
|
|
class QLineEdit;
|
|
class QFont;
|
|
class QHostInfo;
|
|
class EchoGraph;
|
|
class FastGraph;
|
|
class WideGraph;
|
|
class LogQSO;
|
|
class Transceiver;
|
|
class MessageAveraging;
|
|
class MessageClient;
|
|
class QTime;
|
|
class WSPRBandHopping;
|
|
class HelpTextWindow;
|
|
class WSPRNet;
|
|
class SoundOutput;
|
|
class Modulator;
|
|
class SoundInput;
|
|
class Detector;
|
|
class SampleDownloader;
|
|
|
|
class MainWindow : public QMainWindow
|
|
{
|
|
Q_OBJECT;
|
|
|
|
public:
|
|
using Frequency = Radio::Frequency;
|
|
using FrequencyDelta = Radio::FrequencyDelta;
|
|
using Mode = Modes::Mode;
|
|
|
|
// Multiple instances: call MainWindow() with *thekey
|
|
explicit MainWindow(bool multiple, QSettings *, QSharedMemory *shdmem,
|
|
unsigned downSampleFactor, QNetworkAccessManager * network_manager,
|
|
QWidget *parent = 0);
|
|
~MainWindow();
|
|
|
|
public slots:
|
|
void showSoundInError(const QString& errorMsg);
|
|
void showSoundOutError(const QString& errorMsg);
|
|
void showStatusMessage(const QString& statusMsg);
|
|
void dataSink(qint64 frames);
|
|
void fastSink(qint64 frames);
|
|
void diskDat();
|
|
void freezeDecode(int n);
|
|
void guiUpdate();
|
|
void doubleClickOnCall(bool shift, bool ctrl);
|
|
void doubleClickOnCall2(bool shift, bool ctrl);
|
|
void readFromStdout();
|
|
void readFromStderr();
|
|
void jt9_error(QProcess::ProcessError);
|
|
void p1ReadFromStdout();
|
|
void p1ReadFromStderr();
|
|
void p1Error(QProcess::ProcessError);
|
|
void setXIT(int n, Frequency base = 0u);
|
|
void setFreq4(int rxFreq, int txFreq);
|
|
void msgAvgDecode2();
|
|
void fastPick(int x0, int x1, int y);
|
|
|
|
protected:
|
|
virtual void keyPressEvent( QKeyEvent *e );
|
|
void closeEvent(QCloseEvent*);
|
|
virtual bool eventFilter(QObject *object, QEvent *event);
|
|
|
|
private slots:
|
|
void on_tx1_editingFinished();
|
|
void on_tx2_editingFinished();
|
|
void on_tx3_editingFinished();
|
|
void on_tx4_editingFinished();
|
|
void on_tx5_currentTextChanged (QString const&);
|
|
void on_tx6_editingFinished();
|
|
void on_actionSettings_triggered();
|
|
void on_monitorButton_clicked (bool);
|
|
void on_actionAbout_triggered();
|
|
void on_autoButton_clicked (bool);
|
|
void on_stopTxButton_clicked();
|
|
void on_stopButton_clicked();
|
|
void on_actionOnline_User_Guide_triggered();
|
|
void on_actionLocal_User_Guide_triggered();
|
|
void on_actionWide_Waterfall_triggered();
|
|
void on_actionOpen_triggered();
|
|
void on_actionOpen_next_in_directory_triggered();
|
|
void on_actionDecode_remaining_files_in_directory_triggered();
|
|
void on_actionDelete_all_wav_files_in_SaveDir_triggered();
|
|
void on_actionOpen_log_directory_triggered ();
|
|
void on_actionNone_triggered();
|
|
void on_actionSave_all_triggered();
|
|
void on_actionKeyboard_shortcuts_triggered();
|
|
void on_actionSpecial_mouse_commands_triggered();
|
|
void on_DecodeButton_clicked (bool);
|
|
void decode();
|
|
void decodeBusy(bool b);
|
|
void on_EraseButton_clicked();
|
|
void on_txb1_clicked();
|
|
void on_txFirstCheckBox_stateChanged(int arg1);
|
|
void set_ntx(int n);
|
|
void on_txb2_clicked();
|
|
void on_txb3_clicked();
|
|
void on_txb4_clicked();
|
|
void on_txb5_clicked();
|
|
void on_txb6_clicked();
|
|
void on_lookupButton_clicked();
|
|
void on_addButton_clicked();
|
|
void on_dxCallEntry_textChanged(const QString &arg1);
|
|
void on_dxGridEntry_textChanged(const QString &arg1);
|
|
void on_genStdMsgsPushButton_clicked();
|
|
void on_logQSOButton_clicked();
|
|
void on_actionJT9_triggered();
|
|
void on_actionJT65_triggered();
|
|
void on_actionJT9_JT65_triggered();
|
|
void on_actionJT4_triggered();
|
|
void on_TxFreqSpinBox_valueChanged(int arg1);
|
|
void on_actionSave_decoded_triggered();
|
|
void on_actionQuickDecode_triggered();
|
|
void on_actionMediumDecode_triggered();
|
|
void on_actionDeepestDecode_triggered();
|
|
void on_inGain_valueChanged(int n);
|
|
void bumpFqso(int n);
|
|
void on_actionErase_ALL_TXT_triggered();
|
|
void on_actionErase_wsjtx_log_adi_triggered();
|
|
void startTx2();
|
|
void stopTx();
|
|
void stopTx2();
|
|
void on_pbCallCQ_clicked();
|
|
void on_pbAnswerCaller_clicked();
|
|
void on_pbSendRRR_clicked();
|
|
void on_pbAnswerCQ_clicked();
|
|
void on_pbSendReport_clicked();
|
|
void on_pbSend73_clicked();
|
|
void on_rbGenMsg_clicked(bool checked);
|
|
void on_rbFreeText_clicked(bool checked);
|
|
void on_freeTextMsg_currentTextChanged (QString const&);
|
|
void on_rptSpinBox_valueChanged(int n);
|
|
void killFile();
|
|
void on_tuneButton_clicked (bool);
|
|
void on_pbR2T_clicked();
|
|
void on_pbT2R_clicked();
|
|
void acceptQSO2(QDateTime const&, QString const& call, QString const& grid
|
|
, Frequency dial_freq, QString const& mode
|
|
, QString const& rpt_sent, QString const& rpt_received
|
|
, QString const& tx_power, QString const& comments
|
|
, QString const& name);
|
|
void on_bandComboBox_currentIndexChanged (int index);
|
|
void on_bandComboBox_activated (int index);
|
|
void on_readFreq_clicked();
|
|
void on_pbTxMode_clicked();
|
|
void on_RxFreqSpinBox_valueChanged(int n);
|
|
void on_cbTxLock_clicked(bool checked);
|
|
void on_outAttenuation_valueChanged (int);
|
|
void rigOpen ();
|
|
void handle_transceiver_update (Transceiver::TransceiverState const&);
|
|
void handle_transceiver_failure (QString const& reason);
|
|
void on_actionAstronomical_data_toggled (bool);
|
|
void on_actionShort_list_of_add_on_prefixes_and_suffixes_triggered();
|
|
void getpfx();
|
|
void band_changed (Frequency);
|
|
void monitor (bool);
|
|
void stop_tuning ();
|
|
void stopTuneATU();
|
|
void auto_tx_mode(bool);
|
|
void on_actionMessage_averaging_triggered();
|
|
void on_actionInclude_averaging_triggered();
|
|
void on_actionInclude_correlation_triggered();
|
|
void VHF_controls_visible(bool b);
|
|
void VHF_features_enabled(bool b);
|
|
void on_cbEME_toggled(bool b);
|
|
void on_sbSubmode_valueChanged(int n);
|
|
void on_cbShMsgs_toggled(bool b);
|
|
void on_cbTx6_toggled(bool b);
|
|
void networkError (QString const&);
|
|
void on_ClrAvgButton_clicked();
|
|
void on_actionWSPR_2_triggered();
|
|
void on_actionWSPR_15_triggered();
|
|
void on_syncSpinBox_valueChanged(int n);
|
|
void on_TxPowerComboBox_currentIndexChanged(const QString &arg1);
|
|
void on_sbTxPercent_valueChanged(int n);
|
|
void on_cbUploadWSPR_Spots_toggled(bool b);
|
|
void WSPR_config(bool b);
|
|
void uploadSpots();
|
|
void TxAgain();
|
|
void RxQSY();
|
|
void uploadResponse(QString response);
|
|
void p3ReadFromStdout();
|
|
void p3ReadFromStderr();
|
|
void p3Error(QProcess::ProcessError e);
|
|
void on_WSPRfreqSpinBox_valueChanged(int n);
|
|
void on_pbTxNext_clicked(bool b);
|
|
void on_actionEcho_Graph_triggered();
|
|
void on_actionEcho_triggered();
|
|
void on_actionISCAT_triggered();
|
|
void on_actionFast_Graph_triggered();
|
|
void fast_decode_done();
|
|
void on_actionSave_reference_spectrum_triggered();
|
|
void on_sbTR_valueChanged(int index);
|
|
void on_sbFtol_valueChanged(int index);
|
|
void on_cbFast9_clicked(bool b);
|
|
void on_actionJTMSK_triggered();
|
|
void on_sbCQRxFreq_valueChanged(int n);
|
|
void on_cbCQRx_toggled(bool b);
|
|
|
|
private:
|
|
Q_SIGNAL void initializeAudioOutputStream (QAudioDeviceInfo,
|
|
unsigned channels, unsigned msBuffered) const;
|
|
Q_SIGNAL void stopAudioOutputStream () const;
|
|
Q_SIGNAL void startAudioInputStream (QAudioDeviceInfo const&,
|
|
int framesPerBuffer, AudioDevice * sink,
|
|
unsigned downSampleFactor, AudioDevice::Channel) const;
|
|
Q_SIGNAL void suspendAudioInputStream () const;
|
|
Q_SIGNAL void resumeAudioInputStream () const;
|
|
Q_SIGNAL void startDetector (AudioDevice::Channel) const;
|
|
Q_SIGNAL void detectorClose () const;
|
|
Q_SIGNAL void finished () const;
|
|
Q_SIGNAL void transmitFrequency (double) const;
|
|
Q_SIGNAL void endTransmitMessage (bool quick = false) const;
|
|
Q_SIGNAL void tune (bool = true) const;
|
|
Q_SIGNAL void sendMessage (unsigned symbolsLength, double framesPerSymbol,
|
|
double frequency, double toneSpacing,
|
|
SoundOutput *, AudioDevice::Channel = AudioDevice::Mono,
|
|
bool synchronize = true, bool fastMode = false, double dBSNR = 99.,
|
|
int TRperiod=60) const;
|
|
Q_SIGNAL void outAttenuationChanged (qreal) const;
|
|
Q_SIGNAL void toggleShorthand () const;
|
|
|
|
private:
|
|
void astroUpdate ();
|
|
|
|
QDir m_dataDir;
|
|
QString m_revision;
|
|
bool m_multiple;
|
|
QSettings * m_settings;
|
|
|
|
Ui::MainWindow * ui;
|
|
|
|
// other windows
|
|
Configuration m_config;
|
|
WSPRBandHopping m_WSPR_band_hopping;
|
|
bool m_WSPR_tx_next;
|
|
QMessageBox m_rigErrorMessageBox;
|
|
QScopedPointer<SampleDownloader> m_sampleDownloader;
|
|
|
|
QScopedPointer<WideGraph> m_wideGraph;
|
|
QScopedPointer<EchoGraph> m_echoGraph;
|
|
QScopedPointer<FastGraph> m_fastGraph;
|
|
QScopedPointer<LogQSO> m_logDlg;
|
|
QScopedPointer<Astro> m_astroWidget;
|
|
QScopedPointer<HelpTextWindow> m_shortcuts;
|
|
QScopedPointer<HelpTextWindow> m_prefixes;
|
|
QScopedPointer<HelpTextWindow> m_mouseCmnds;
|
|
QScopedPointer<MessageAveraging> m_msgAvgWidget;
|
|
|
|
Transceiver::TransceiverState m_rigState;
|
|
Frequency m_lastDialFreq;
|
|
QString m_lastBand;
|
|
Frequency m_callingFrequency;
|
|
Frequency m_dialFreqRxWSPR; // best guess at WSPR QRG
|
|
|
|
Detector * m_detector;
|
|
SoundInput * m_soundInput;
|
|
Modulator * m_modulator;
|
|
SoundOutput * m_soundOutput;
|
|
QThread m_audioThread;
|
|
|
|
qint64 m_msErase;
|
|
qint64 m_secBandChanged;
|
|
qint64 m_freqMoon;
|
|
Frequency m_freqNominal;
|
|
Frequency m_freqTxNominal;
|
|
Astro::Correction m_astroCorrection;
|
|
|
|
double m_s6;
|
|
double m_tRemaining;
|
|
|
|
float m_DTtol;
|
|
float m_t0;
|
|
float m_t1;
|
|
float m_t0Pick;
|
|
float m_t1Pick;
|
|
|
|
qint32 m_waterfallAvg;
|
|
qint32 m_ntx;
|
|
qint32 m_timeout;
|
|
qint32 m_XIT;
|
|
qint32 m_setftx;
|
|
qint32 m_ndepth;
|
|
qint32 m_sec0;
|
|
qint32 m_RxLog;
|
|
qint32 m_nutc0;
|
|
qint32 m_ntr;
|
|
qint32 m_tx;
|
|
qint32 m_hsym;
|
|
qint32 m_TRperiod;
|
|
qint32 m_nsps;
|
|
qint32 m_hsymStop;
|
|
qint32 m_len1;
|
|
qint32 m_inGain;
|
|
qint32 m_ncw;
|
|
qint32 m_secID;
|
|
qint32 m_repeatMsg;
|
|
qint32 m_watchdogLimit;
|
|
qint32 m_astroFont;
|
|
qint32 m_nSubMode;
|
|
qint32 m_nclearave;
|
|
qint32 m_minSync;
|
|
qint32 m_dBm;
|
|
qint32 m_pctx;
|
|
qint32 m_nseq;
|
|
qint32 m_nWSPRdecodes;
|
|
qint32 m_jh;
|
|
qint32 m_k0;
|
|
qint32 m_kdone;
|
|
qint32 m_nPick;
|
|
qint32 m_TRindex;
|
|
qint32 m_FtolIndex;
|
|
qint32 m_Ftol;
|
|
qint32 m_TRperiodFast;
|
|
qint32 m_nTx73;
|
|
qint32 m_freqCQ;
|
|
|
|
bool m_btxok; //True if OK to transmit
|
|
bool m_diskData;
|
|
bool m_loopall;
|
|
bool m_decoderBusy;
|
|
bool m_txFirst;
|
|
bool m_auto;
|
|
bool m_restart;
|
|
bool m_startAnother;
|
|
bool m_saveDecoded;
|
|
bool m_saveAll;
|
|
bool m_widebandDecode;
|
|
bool m_call3Modified;
|
|
bool m_dataAvailable;
|
|
bool m_killAll;
|
|
bool m_bDecoded;
|
|
bool m_monitorStartOFF;
|
|
bool m_pskReporterInit;
|
|
bool m_noSuffix;
|
|
bool m_toRTTY;
|
|
bool m_dBtoComments;
|
|
bool m_promptToLog;
|
|
bool m_blankLine;
|
|
bool m_insertBlank;
|
|
bool m_displayDXCCEntity;
|
|
bool m_clearCallGrid;
|
|
bool m_bMiles;
|
|
bool m_decodedText2;
|
|
bool m_freeText;
|
|
bool m_quickCall;
|
|
bool m_73TxDisable;
|
|
bool m_sentFirst73;
|
|
int m_currentMessageType;
|
|
QString m_currentMessage;
|
|
int m_lastMessageType;
|
|
QString m_lastMessageSent;
|
|
bool m_bMultipleOK;
|
|
bool m_lockTxFreq;
|
|
bool m_tx2QSO;
|
|
bool m_CATerror;
|
|
bool m_bAstroData;
|
|
bool m_bEME;
|
|
bool m_bShMsgs;
|
|
bool m_uploadSpots;
|
|
bool m_uploading;
|
|
bool m_txNext;
|
|
bool m_grid6;
|
|
bool m_tuneup;
|
|
bool m_bTxTime;
|
|
bool m_rxDone;
|
|
bool m_bSimplex; // not using split even if it is available
|
|
bool m_bEchoTxOK;
|
|
bool m_bTransmittedEcho;
|
|
bool m_bEchoTxed;
|
|
bool m_bFastMode;
|
|
bool m_bFast9;
|
|
bool m_bFastDecodeCalled;
|
|
bool m_bDoubleClickAfterCQnnn;
|
|
float m_pctZap;
|
|
|
|
char m_msg[100][80];
|
|
|
|
// labels in status bar
|
|
QLabel * tx_status_label;
|
|
QLabel * mode_label;
|
|
QLabel * last_tx_label;
|
|
QLabel * auto_tx_label;
|
|
|
|
QProgressBar* progressBar;
|
|
|
|
QMessageBox msgBox0;
|
|
|
|
QFuture<void> m_wav_future;
|
|
QFuture<void>* future3;
|
|
QFutureWatcher<void> m_wav_future_watcher;
|
|
QFutureWatcher<void> * watcher3;
|
|
|
|
QProcess proc_jt9;
|
|
QProcess p1;
|
|
QProcess p3;
|
|
|
|
WSPRNet *wsprNet;
|
|
|
|
QTimer m_guiTimer;
|
|
QTimer* ptt1Timer; //StartTx delay
|
|
QTimer* ptt0Timer; //StopTx delay
|
|
QTimer* logQSOTimer;
|
|
QTimer* killFileTimer;
|
|
QTimer* tuneButtonTimer;
|
|
QTimer* uploadTimer;
|
|
QTimer* tuneATU_Timer;
|
|
QTimer* TxAgainTimer;
|
|
QTimer* RxQSYTimer;
|
|
|
|
QString m_path;
|
|
QString m_pbdecoding_style1;
|
|
QString m_pbmonitor_style;
|
|
QString m_pbAutoOn_style;
|
|
QString m_pbTune_style;
|
|
QString m_baseCall;
|
|
QString m_hisCall;
|
|
QString m_hisGrid;
|
|
QString m_appDir;
|
|
QString m_dxccPfx;
|
|
QString m_palette;
|
|
QString m_dateTime;
|
|
QString m_mode;
|
|
QString m_modeTx;
|
|
QString m_fname;
|
|
QString m_rpt;
|
|
QString m_rptSent;
|
|
QString m_rptRcvd;
|
|
QString m_qsoStart;
|
|
QString m_qsoStop;
|
|
QString m_cmnd;
|
|
QString m_msgSent0;
|
|
QString m_fileToKill;
|
|
QString m_fileToSave;
|
|
QString m_band;
|
|
QString m_c2name;
|
|
QString m_calls;
|
|
|
|
QStringList m_prefix;
|
|
QStringList m_suffix;
|
|
QStringList m_sunriseBands;
|
|
QStringList m_dayBands;
|
|
QStringList m_sunsetBands;
|
|
QStringList m_nightBands;
|
|
QStringList m_tuneBands;
|
|
|
|
QHash<QString,bool> m_pfx;
|
|
QHash<QString,bool> m_sfx;
|
|
|
|
QDateTime m_dateTimeQSO;
|
|
|
|
QSharedMemory *mem_jt9;
|
|
LogBook m_logBook;
|
|
DecodedText m_QSOText;
|
|
unsigned m_msAudioOutputBuffered;
|
|
unsigned m_framesAudioInputBuffered;
|
|
unsigned m_downSampleFactor;
|
|
QThread::Priority m_audioThreadPriority;
|
|
bool m_bandEdited;
|
|
bool m_splitMode;
|
|
bool m_monitoring;
|
|
bool m_transmitting;
|
|
bool m_tune;
|
|
int m_tune_attenuation;
|
|
int m_tune_attenuation_restore;
|
|
bool m_block_pwr_tooltip;
|
|
Frequency m_lastMonitoredFrequency;
|
|
double m_toneSpacing;
|
|
int m_firstDecode;
|
|
QProgressDialog m_optimizingProgress;
|
|
QTimer m_heartbeat;
|
|
MessageClient * m_messageClient;
|
|
PSK_Reporter *psk_Reporter;
|
|
DisplayManual m_manual;
|
|
|
|
//---------------------------------------------------- private functions
|
|
void readSettings();
|
|
void setDecodedTextFont (QFont const&);
|
|
void writeSettings();
|
|
void createStatusBar();
|
|
void updateStatusBar();
|
|
void msgBox(QString t);
|
|
void genStdMsgs(QString rpt);
|
|
void clearDX ();
|
|
void lookup();
|
|
void ba2msg(QByteArray ba, char* message);
|
|
void msgtype(QString t, QLineEdit* tx);
|
|
void stub();
|
|
void statusChanged();
|
|
bool gridOK(QString g);
|
|
bool shortList(QString callsign);
|
|
void transmit (double snr = 99.);
|
|
void rigFailure (QString const& reason, QString const& detail);
|
|
void pskSetLocal ();
|
|
void displayDialFrequency ();
|
|
void transmitDisplay (bool);
|
|
void processMessage(QString const& messages, qint32 position, bool ctrl);
|
|
void replyToCQ (QTime, qint32 snr, float delta_time, quint32 delta_frequency, QString const& mode, QString const& message_text);
|
|
void replayDecodes ();
|
|
void postDecode (bool is_new, QString const& message);
|
|
void postWSPRDecode (bool is_new, QStringList message_parts);
|
|
void enable_DXCC_entity (bool on);
|
|
void switch_mode (Mode);
|
|
void WSPR_scheduling ();
|
|
void setRig ();
|
|
void WSPR_history(Frequency dialFreq, int ndecodes);
|
|
QString WSPR_hhmm(int n);
|
|
void fast_config(bool b);
|
|
void CQRxFreq();
|
|
void save_wave_file (QString const& name, short const * data, int seconds) const;
|
|
void read_wav_file (QString const& fname);
|
|
};
|
|
|
|
extern int killbyname(const char* progName);
|
|
extern void getDev(int* numDevices,char hostAPI_DeviceName[][50],
|
|
int minChan[], int maxChan[],
|
|
int minSpeed[], int maxSpeed[]);
|
|
extern int next_tx_state(int pctx);
|
|
|
|
#endif // MAINWINDOW_H
|