w4kek/WSJT-X
1
0
Fork 0
mirror of https://github.com/saitohirga/WSJT-X.git synced 2024-09-09 06:46:39 -04:00
Code Issues Packages Projects Releases Wiki Activity
e0e67f0a6a
WSJT-X/CMakeLists.txt
Bill Somerville e0e67f0a6a Added CMake option to control experimental features. 
Sometimes parts of the application are  not fully ready for release at
release  time.   This  option  allows  such  features  to  be  enabled
conditionally at configure time.

The CMake option WSJT_ENABLE_EXPERIMENTAL_FEATURES  is used to control
this ability.  Normally  you will not need to change  it as it behaves
in a reasonable  way.  The option is ON in  debug build configurations
and OFF in non-debug configuratiuons.

The  option  is   made  available  in  all  source   modules  via  the
WSJT_ENABLE_EXPERIMENTAL_FEATURES macro  which is defined to  1 if the
option is ON and to 0 if it is OFF.

Since this  default behavior is  potentially dangerous because  it can
mean that release builds contain different code from debug builds; the
option may  be set to  OFF in debug  configurations in the  normal way
(cmake-gui,  edit  CMakeCache.txt, etc.)   to  achieve  a debug  build
similar to a default release build.

git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@4182 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2014-06-19 16:47:49 +00:00

916 lines
27 KiB
CMake
Raw Blame History

cmake_minimum_required (VERSION 2.8.9 FATAL_ERROR)
project (wsjtx C CXX Fortran)
#
# project information
#
set (PROJECT_VENDOR "Joe Taylor, K1JT")
set (PROJECT_CONTACT "Joe Taylor <k1jt@arrl.net>")
set (PROJECT_COPYRIGHT "Copyright (C) 2001-2014 by Joe Taylor, K1JT")
set (PROJECT_HOMEPAGE "http://www.physics.princeton.edu/pulsar/K1JT/wsjtx.html")
set (PROJECT_MANUAL "http://www.physics.princeton.edu/pulsar/K1JT/wsjtx-doc/wsjtx-main-toc2.html")
set (PROJECT_SUMMARY_DESCRIPTION "WSJT-X - JT9 and JT65 Modes for LF, MF and HF Amateur Radio.")
set (PROJECT_DESCRIPTION "${PROJECT_SUMMARY_DESCRIPTION}
WSJT-X implements JT9, a new mode designed especially for the LF, MF,
and HF bands, as well as the popular mode JT65. Both modes were
designed for making reliable, confirmed QSOs under extreme weak-signal
conditions. They use nearly identical message structure and source
encoding. JT65 was designed for EME (“moonbounce”) on the VHF/UHF
bands and has also proved very effective for worldwide QRP
communication at HF; in contrast, JT9 is optimized for HF and lower
frequencies. JT9 is about 2 dB more sensitive than JT65A while using
less than 10% of the bandwidth. World-wide QSOs are possible with
power levels of a few watts and compromise antennas. A 2 kHz slice of
spectrum is essentially full when occupied by ten JT65 signals. As
many as 100 JT9 signals can fit into the same space, without overlap.
.
WSJT-X offers a “bi-lingual“ operating mode in which you can transmit
and receive JT65 and JT9 signals, switching between modes
automatically as needed. Displayed bandwidth can be as large as 5
kHz. If your receiver has as upper-sideband filter at least 4 kHz
wide, you can have all the typical JT65 and JT9 activity on screen at
once, available for making QSOs with a click of the mouse. Even with
standard SSB-width IF filters, switching between JT65 and JT9 modes is
quick and convenient. Be sure to read the online WSJT-X User's
Guide.")
set (CMAKE_MODULE_PATH ${CMAKE_MODULE_PATH} ${PROJECT_SOURCE_DIR}/CMake/Modules)
include (${PROJECT_SOURCE_DIR}/CMake/VersionCompute.cmake)
# make sure that the default configuration is a RELEASE
if (NOT CMAKE_BUILD_TYPE)
set (CMAKE_BUILD_TYPE RELEASE CACHE STRING
"Choose the type of build, options are: None Debug Release."
FORCE)
endif (NOT CMAKE_BUILD_TYPE)
if (CMAKE_BUILD_TYPE MATCHES "[Dd][Ee][Bb][Uu][Gg]")
set (is_debug_build 1)
endif ()
#
# Options & features
#
# Some of these directly effect compilation by being defined in
# wsjtx_config.h.in which makes them available to the C/C++
# pre-processor.
#
include (CMakeDependentOption)
option (UPDATE_TRANSLATIONS "Update source translation translations/*.ts
files (WARNING: make clean will delete the source .ts files! Danger!)")
option (WSJT_SHARED_RUNTIME "Debugging option that allows running from a shared Cloud directory.")
option (WSJT_QDEBUG_TO_FILE "Redirect Qt debuging messages to a trace file.")
option (WSJT_QDEBUG_IN_RELEASE "Leave Qt debugging statements in Release configuration.")
option (WSJT_TRACE_CAT "Debugging option that turns on CAT diagnostics.")
option (WSJT_TRACE_CAT_POLLS "Debugging option that turns on CAT diagnostics during polling.")
option (WSJT_HAMLIB_TRACE "Debugging option that turns on full Hamlib internal diagnostics.")
option (WSJT_STANDARD_FILE_LOCATIONS "All non-installation files located in \"Standard\" platfom specific locations." ON)
option (WSJT_SOFT_KEYING "Apply a ramp to CW keying envelope to reduce transients." ON)
option (WSJT_SKIP_MANPAGES "Skip *nix manpage generation")
CMAKE_DEPENDENT_OPTION (WSJT_ENABLE_EXPERIMENTAL_FEATURES "Enable features not fully ready for public releases." ON
"is_debug_build" OFF)
#
# install locations
#
set (WSJT_BIN_DESTINATION bin)
set (WSJT_LIB_DESTINATION lib)
set (WSJT_SHARE_DESTINATION share/wsjtx)
set (WSJT_DOC_DESTINATION share/doc/wsjtx)
set (WSJT_MANPAGE_DESTINATION share)
set (WSJT_PLUGIN_DESTINATION lib/plugins)
set (WSJT_QT_CONF_DESTINATION bin)
#
# Project sources
#
set (wsjt_qt_CXXSRCS
NetworkServerLookup.cpp
revision_utils.cpp
WFPalette.cpp
Radio.cpp
Bands.cpp
FrequencyList.cpp
StationList.cpp
FrequencyLineEdit.cpp
FrequencyItemDelegate.cpp
ForeignKeyDelegate.cpp
LiveFrequencyValidator.cpp
GetUserId.cpp
TraceFile.cpp
AudioDevice.cpp
Transceiver.cpp
TransceiverBase.cpp
EmulateSplitTransceiver.cpp
TransceiverFactory.cpp
PollingTransceiver.cpp
HamlibTransceiver.cpp
HRDTransceiver.cpp
DXLabSuiteCommanderTransceiver.cpp
)
set (ConfigTest_CXXSRCS
Configuration.cpp
TestConfiguration.cpp
ConfigTest.cpp
)
set (jt9_CXXSRCS
lib/ipcomm.cpp
)
set (wsjtx_CXXSRCS
logbook/adif.cpp
logbook/countrydat.cpp
logbook/countriesworked.cpp
logbook/logbook.cpp
psk_reporter.cpp
Modulator.cpp
Detector.cpp
logqso.cpp
displaytext.cpp
decodedtext.cpp
getfile.cpp
soundout.cpp
soundin.cpp
meterwidget.cpp
signalmeter.cpp
plotter.cpp
widegraph.cpp
about.cpp
astro.cpp
mainwindow.cpp
Configuration.cpp
main.cpp
)
if (WIN32)
set (ConfigTest_CXXSRCS
${ConfigTest_CXXSRCS}
OmniRigTransceiver.cpp
)
set (wsjt_CXXSRCS
${wsjt_CXXSRCS}
killbyname.cpp
)
set (wsjt_qt_CXXSRCS
${wsjt_qt_CXXSRCS}
OmniRigTransceiver.cpp
)
endif (WIN32)
set (wsjt_FSRCS
lib/afc65b.f90
lib/afc9.f90
lib/analytic.f90
lib/astro.f90
lib/astrosub.f90
lib/astro0.f90
lib/azdist.f90
lib/baddata.f90
lib/ccf2.f90
lib/ccf65.f90
lib/chkhist.f90
lib/chkss2.f90
lib/coord.f90
lib/db.f90
lib/dcoord.f90
lib/decode65a.f90
lib/decode65b.f90
lib/decode9.f90
lib/decoder.f90
lib/deg2grid.f90
lib/demod64a.f90
lib/determ.f90
lib/dot.f90
lib/downsam9.f90
lib/encode232.f90
lib/entail.f90
lib/extract.F90
lib/geocentric.f90
lib/f77_wisdom.f90
lib/fano232.f90
lib/fchisq.f90
lib/fchisq65.f90
lib/fil3.f90
lib/fil4.f90
lib/fil6521.f90
lib/filbig.f90
lib/fillcom.f90
lib/flat1.f90
lib/flat2.f90
lib/flat3.f90
lib/flat65.f90
lib/four2a.f90
lib/gen65.f90
lib/genjt9.f90
lib/geodist.f90
lib/getlags.f90
lib/getpfx1.f90
lib/getpfx2.f90
lib/graycode.f90
lib/graycode65.f90
lib/grid2deg.f90
lib/grid2k.f90
lib/grid2n.f90
lib/indexx.f90
lib/interleave63.f90
lib/interleave9.f90
lib/jt65a.f90
lib/k2grid.f90
lib/moon2.f90
lib/moondop.f90
lib/morse.f90
lib/move.f90
lib/n2grid.f90
lib/nchar.f90
lib/options.f90
lib/packbits.f90
lib/packcall.f90
lib/packgrid.f90
lib/packmsg.f90
lib/packtext.f90
lib/pctile.f90
lib/peakdt9.f90
lib/pfxdump.f90
lib/polfit.f90
lib/prog_args.f90
lib/sec_midn.f90
lib/setup65.f90
lib/sleep_msec.f90
lib/smo.f90
lib/smo121.f90
lib/softsym.f90
lib/sort.f90
lib/ssort.f90
lib/stdmsg.f90
lib/sun.f90
lib/symspec.f90
lib/symspec2.f90
lib/symspec65.f90
lib/sync9.f90
lib/timer.f90
lib/tm2.f90
lib/toxyz.f90
lib/twkfreq.f90
lib/twkfreq65.f90
lib/unpackbits.f90
lib/unpackcall.f90
lib/unpackgrid.f90
lib/unpackmsg.f90
lib/unpacktext.f90
lib/zplot9.f90
)
set (wsjt_CSRCS
lib/decode_rs.c
lib/encode_rs.c
lib/gran.c
lib/igray.c
lib/init_rs.c
lib/tmoonsub.c
lib/usleep.c
lib/wrapkarn.c
)
set (ConfigTest_UISRCS
TestConfiguration.ui
Configuration.ui
)
set (wsjt_qt_UISRCS
wf_palette_design_dialog.ui
)
set (wsjtx_UISRCS
mainwindow.ui
about.ui
astro.ui
widegraph.ui
logqso.ui
Configuration.ui
)
set (all_C_and_CXXSRCS
${wsjt_CSRCS}
${wsjt_CXXSRCS}
${wsjt_qt_CXXSRCS}
${jt9_CXXSRCS}
${ConfigTest_CXXSRCS}
${wsjtx_CXXSRCS}
)
if (APPLE)
set (WSJTX_ICON_FILE ${CMAKE_PROJECT_NAME}.icns)
set (ICONSRCS
icons/Darwin/${CMAKE_PROJECT_NAME}.iconset/icon_16x16.png
icons/Darwin/${CMAKE_PROJECT_NAME}.iconset/icon_16x16@2x.png
icons/Darwin/${CMAKE_PROJECT_NAME}.iconset/icon_32x32.png
icons/Darwin/${CMAKE_PROJECT_NAME}.iconset/icon_32x32@2x.png
icons/Darwin/${CMAKE_PROJECT_NAME}.iconset/icon_128x128.png
icons/Darwin/${CMAKE_PROJECT_NAME}.iconset/icon_128x128@2x.png
icons/Darwin/${CMAKE_PROJECT_NAME}.iconset/icon_256x256.png
icons/Darwin/${CMAKE_PROJECT_NAME}.iconset/icon_256x256@2x.png
icons/Darwin/${CMAKE_PROJECT_NAME}.iconset/icon_512x512.png
icons/Darwin/${CMAKE_PROJECT_NAME}.iconset/icon_512x512@2x.png
)
add_custom_command (
OUTPUT ${WSJTX_ICON_FILE}
COMMAND iconutil -c icns --output "${CMAKE_BINARY_DIR}/${WSJTX_ICON_FILE}" "${CMAKE_SOURCE_DIR}/icons/Darwin/${CMAKE_PROJECT_NAME}.iconset"
DEPENDS ${ICONSRCS}
COMMENT "Building Icons"
)
endif (APPLE)
set_source_files_properties (${WSJTX_ICON_FILE} PROPERTIES MACOSX_PACKAGE_LOCATION Resources)
if (NOT WSJT_QDEBUG_IN_RELEASE)
set_directory_properties (PROPERTIES COMPILE_DEFINITIONS_RELEASE "QT_NO_DEBUG_OUTPUT;QT_NO_WARNING_OUTPUT")
set_directory_properties (PROPERTIES COMPILE_DEFINITIONS_MINSIZEREL "QT_NO_DEBUG_OUTPUT;QT_NO_WARNING_OUTPUT")
endif (NOT WSJT_QDEBUG_IN_RELEASE)
set_property (SOURCE ${all_C_and_CXXSRCS} APPEND PROPERTY COMPILE_FLAGS "-include wsjtx_config.h")
set_property (SOURCE ${all_C_and_CXXSRCS} APPEND PROPERTY OBJECT_DEPENDS wsjtx_config.h)
if (WIN32)
# generate the OmniRig COM interface source
find_program (DUMPCPP dumpcpp)
if (DUMPCPP-NOTFOUND)
message (FATAL_ERROR "dumpcpp tool not found")
endif (DUMPCPP-NOTFOUND)
execute_process (
COMMAND ${DUMPCPP} -getfile {4FE359C5-A58F-459D-BE95-CA559FB4F270}
OUTPUT_VARIABLE AXSERVER
OUTPUT_STRIP_TRAILING_WHITESPACE
)
string (STRIP "${AXSERVER}" AXSERVER)
if (NOT AXSERVER)
message (FATAL_ERROR "You need to install OmniRig on this computer")
endif (NOT AXSERVER)
string (REPLACE "\"" "" AXSERVER ${AXSERVER})
file (TO_CMAKE_PATH ${AXSERVER} AXSERVERSRCS)
endif (WIN32)
if (POLICY CMP0020)
cmake_policy (SET CMP0020 NEW) # link to Qt winmain on Windows
endif (POLICY CMP0020)
#
# decide on platform specifc packing and fixing up
#
if (APPLE)
set (WSJTX_BUNDLE_VERSION ${wsjtx_VERSION})
# make sure CMAKE_INSTALL_PREFIX ends in /
string (LENGTH "${CMAKE_INSTALL_PREFIX}" LEN)
math (EXPR LEN "${LEN} -1" )
string (SUBSTRING "${CMAKE_INSTALL_PREFIX}" ${LEN} 1 ENDCH)
if (NOT "${ENDCH}" STREQUAL "/")
set (CMAKE_INSTALL_PREFIX "${CMAKE_INSTALL_PREFIX}/")
endif ()
# install inside bundle
# set (CMAKE_INSTALL_PREFIX "${CMAKE_INSTALL_PREFIX}wsjtx.app")
set (WSJT_PLUGIN_DESTINATION ${CMAKE_PROJECT_NAME}.app/Contents/PlugIns)
set (WSJT_QT_CONF_DESTINATION ${CMAKE_PROJECT_NAME}.app/Contents/Resources)
set (WSJT_SHARE_DESTINATION ${CMAKE_PROJECT_NAME}.app/Contents/Resources)
set (WSJT_DOC_DESTINATION ${CMAKE_PROJECT_NAME}.app/Contents/Resources)
set (WSJT_MANPAGE_DESTINATION ${CMAKE_PROJECT_NAME}.app/Contents/Resources)
set (WSJT_BIN_DESTINATION ${CMAKE_PROJECT_NAME}.app/Contents/MacOS)
endif (APPLE)
#
# C & C++ setup
#
set (CMAKE_C_FLAGS "${CMAKE_C_FLAGS} -Wall -Wextra")
set (CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -Wall -Wextra -std=c++11 -fexceptions -frtti")
if (WIN32)
set (CMAKE_C_FLAGS "${CMAKE_C_FLAGS} -fno-keep-inline-dllexport")
endif (WIN32)
if (APPLE)
set (CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -stdlib=libc++")
else (APPLE)
set (CMAKE_C_FLAGS "${CMAKE_C_FLAGS} -pthread")
set (CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -pthread")
endif (APPLE)
#
# Fortran setup
#
set (General_FFLAGS "-fbounds-check -Wall -Wno-conversion -fno-second-underscore")
# FFLAGS depend on the compiler
get_filename_component (Fortran_COMPILER_NAME ${CMAKE_Fortran_COMPILER} NAME)
if (Fortran_COMPILER_NAME MATCHES "gfortran.*")
# gfortran
set (CMAKE_Fortran_FLAGS_RELEASE "-funroll-all-loops -fno-f2c -O3 ${General_FFLAGS}")
set (CMAKE_Fortran_FLAGS_DEBUG "-fno-f2c -O0 -g ${General_FFLAGS}")
elseif (Fortran_COMPILER_NAME MATCHES "ifort.*")
# ifort (untested)
set (CMAKE_Fortran_FLAGS_RELEASE "-f77rtl -O3 ${General_FFLAGS}")
set (CMAKE_Fortran_FLAGS_DEBUG "-f77rtl -O0 -g ${General_FFLAGS}")
elseif (Fortran_COMPILER_NAME MATCHES "g77")
# g77
set (CMAKE_Fortran_FLAGS_RELEASE "-funroll-all-loops -fno-f2c -O3 -m32 ${General_FFLAGS}")
set (CMAKE_Fortran_FLAGS_DEBUG "-fno-f2c -O0 -g -m32 ${General_FFLAGS}")
else (Fortran_COMPILER_NAME MATCHES "gfortran.*")
message ("CMAKE_Fortran_COMPILER full path: " ${CMAKE_Fortran_COMPILER})
message ("Fortran compiler: " ${Fortran_COMPILER_NAME})
message ("No optimized Fortran compiler flags are known, we just try -O2...")
set (CMAKE_Fortran_FLAGS_RELEASE "-O2 ${General_FFLAGS}")
set (CMAKE_Fortran_FLAGS_DEBUG "-O0 -g ${General_FFLAGS}")
endif (Fortran_COMPILER_NAME MATCHES "gfortran.*")
#
# setup and test Fortran C/C++ interaction
#
include (FortranCInterface)
FortranCInterface_VERIFY (CXX QUIET)
FortranCInterface_HEADER (FC.h MACRO_NAMESPACE "FC_" SYMBOL_NAMESPACE "FC_"
SYMBOLS )
#
# sort out pre-requisites
#
#
# Setup RPATH so that built executable targets will run in both the
# build tree and the install location without having to set a
# (DYLD|LD)_LIBRARY_PATH override.
#
# use the full RPATH of the build tree
set (CMAKE_SKIP_BUILD_RPATH FALSE)
# when building, don't use the install RPATH, it will still be used
# later on in the install phase
set (CMAKE_BUILD_WITH_INSTALL_RPATH FALSE)
# set (CMAKE_INSTALL_RPATH "${CMAKE_INSTALL_PREFIX}/${WSJT_LIB_DESTINATION}")
# add the automaticaly determined parts of the RPATH which point to
# directories outside of the build tree to the install RPATH
set (CMAKE_INSTALL_RPATH_USE_LINK_PATH TRUE)
# the RPATH to be used when installing, but only if it's not a system
# directory
# list (FIND CMAKE_PLATFORM_IMPLICIT_LINK_DIRECTORIES "${CMAKE_INSTALL_PREFIX}/${WSJT_LIB_DESTINATION}" isSystemDir)
# if ("${isSystemDir}" STREQUAL "-1")
# set (CMAKE_INSTALL_RPATH "${CMAKE_INSTALL_PREFIX}/${WSJT_LIB_DESTINATION}")
# endif ("${isSystemDir}" STREQUAL "-1")
set (QT_NEED_RPATH FALSE)
if (NOT "${QT_LIBRARY_DIR}" STREQUAL "/lib" AND NOT "${QT_LIBRARY_DIR}" STREQUAL "/usr/lib" AND NOT "${QT_LIBRARY_DIR}" STREQUAL "/lib64" AND NOT "${QT_LIBRARY_DIR}" STREQUAL "/usr/lib64")
set (QT_NEED_RPATH TRUE)
endif ()
#
# fftw3 single precsion library
#
find_package (FFTW3 COMPONENTS single REQUIRED)
include_directories (${FFTW3_INCLUDE_DIRS})
#
# libhamlib setup
#
find_package (hamlib 3 REQUIRED)
include_directories (${hamlib_INCLUDE_DIRS})
if (hamlib_STATIC_LIBRARY)
# static link hamlib if archive library available
set (hamlib_LIBRARY "${hamlib_STATIC_LIBRARY}")
set (hamlib_LIBRARIES "${hamlib_STATIC_LIBRARIES}")
endif ()
message (STATUS "hamlib_INCLUDE_DIRS: ${hamlib_INCLUDE_DIRS}")
message (STATUS "hamlib_LIBRARY: ${hamlib_LIBRARY}")
message (STATUS "hamlib_LIBRARIES: ${hamlib_LIBRARIES}")
message (STATUS "hamlib_STATIC_LIBRARY: ${hamlib_STATIC_LIBRARY}")
message (STATUS "hamlib_STATIC_LIBRARIES: ${hamlib_STATIC_LIBRARIES}")
# if (WIN32)
# find_library (hamlib_RUNTIME NAMES hamlib hamlib-2 PATH_SUFFIXES bin)
# get_filename_component (_hamlib_runtime_path "${hamlib_RUNTIME}" PATH)
# file (GLOB hamlib_BACKENDS ${_hamlib_runtime_path}/hamlib*.dll)
# find_library (usb_RUNTIME NAMES usb0 PATH_SUFFIXES bin)
# endif (WIN32)
#
# Qt5 setup
#
# Widgets finds its own dependencies.
find_package (Qt5Widgets 5 REQUIRED)
find_package (Qt5Multimedia 5 REQUIRED)
if (WIN32)
add_definitions (-DQT_NEEDS_QTMAIN)
find_package (Qt5AxContainer REQUIRED)
endif (WIN32)
#
# stuff only qmake can tell us
#
get_target_property (QMAKE_EXECUTABLE Qt5::qmake LOCATION)
function (QUERY_QMAKE VAR RESULT)
exec_program (${QMAKE_EXECUTABLE} ARGS "-query ${VAR}" RETURN_VALUE return_code OUTPUT_VARIABLE output)
if (NOT return_code)
file (TO_CMAKE_PATH "${output}" output)
set (${RESULT} ${output} PARENT_SCOPE)
endif (NOT return_code)
message (STATUS "Asking qmake for ${RESULT} and got ${output}")
endfunction (QUERY_QMAKE)
query_qmake (QT_INSTALL_PLUGINS QT_PLUGINS_DIR)
query_qmake (QT_INSTALL_IMPORTS QT_IMPORTS_DIR)
query_qmake (QT_HOST_DATA QT_DATA_DIR)
set (QT_MKSPECS_DIR ${QT_DATA_DIR}/mkspecs)
# Tell CMake to run moc when necessary
set (CMAKE_AUTOMOC ON)
# don't use Qt "keywords" signal, slot, emit in generated files to
# avoid compatability issue with other libraries
# ADD_DEFINITIONS (-DQT_NO_KEYWORDS)
# ADD_DEFINITIONS (-DUNICODE) #as per qmake
# As moc files are generated in the binary dir, tell CMake to always
# look for includes there:
set (CMAKE_INCLUDE_CURRENT_DIR ON)
# project definitions
add_definitions (-DQT5 -DCMAKE_BUILD -DBIGSYM=1)
if (CMAKE_HOST_UNIX)
add_definitions (-DUNIX)
elseif (CMAKE_HOST_WIN32)
add_definitions (-DWIN32)
endif ()
#
# fetch and validate kvasd
#
add_custom_command (
OUTPUT contrib/kvasd${CMAKE_EXECUTABLE_SUFFIX}
COMMAND ${CMAKE_COMMAND} -D SYSTEM_NAME=${CMAKE_SYSTEM_NAME} -D EXECUTABLE_SUFFIX=${CMAKE_EXECUTABLE_SUFFIX} -P ${CMAKE_SOURCE_DIR}/CMake/download_kvasd.cmake
DEPENDS CMake/download_kvasd.cmake
COMMENT "Downloading kvasd for ${CMAKE_SYSTEM_NAME}"
VERBATIM
)
# UI generation
qt5_wrap_ui (wsjt_qt_GENUISRCS ${wsjt_qt_UISRCS})
qt5_wrap_ui (ConfigTest_GENUISRCS ${ConfigTest_UISRCS})
qt5_wrap_ui (wsjtx_GENUISRCS ${wsjtx_UISRCS})
# Resource generation
qt5_add_resources (wsjtx_RESOURCES_RCC wsjtx.qrc)
# AX COM servers
if (WIN32)
include (QtAxMacros)
wrap_ax_server (GENAXSRCS ${AXSERVERSRCS})
endif (WIN32)
#
# targets
#
# build a library of package functionality
add_library (wsjt STATIC ${wsjt_CSRCS} ${wsjt_CXXSRCS} ${wsjt_FSRCS})
# build a library of package Qt functionality
add_library (wsjt_qt STATIC ${wsjt_qt_CXXSRCS} ${wsjt_qt_GENUISRCS} ${GENAXSRCS})
qt5_use_modules (wsjt_qt Widgets OpenGL Network)
if (WIN32)
qt5_use_modules (wsjt_qt AxContainer AxBase)
endif (WIN32)
add_executable (jt9sim lib/jt9sim.f90 wsjtx.rc)
target_link_libraries (jt9sim wsjt)
add_executable (jt9code lib/jt9code.f90 wsjtx.rc)
target_link_libraries (jt9code wsjt)
add_executable (jt9 lib/jt9.f90 lib/jt9a.f90 lib/jt9b.f90 lib/jt9c.f90 ${jt9_CXXSRCS} wsjtx.rc)
target_link_libraries (jt9 wsjt ${FFTW3_LIBRARIES})
qt5_use_modules (jt9 Core)
# build configuration dialog and transceiver interface test application
#add_executable (ConfigTest ${ConfigTest_CXXSRCS} ${ConfigTest_GENUISRCS} wsjtx.rc)
#target_link_libraries (ConfigTest wsjt wsjt_qt ${hamlib_LIBRARIES})
#qt5_use_modules (ConfigTest Widgets OpenGL Network Multimedia)
# build the main application
add_executable (wsjtx WIN32 MACOSX_BUNDLE
${wsjtx_CXXSRCS}
${wsjtx_GENUISRCS}
wsjtx.rc
${WSJTX_ICON_FILE}
${wsjtx_RESOURCES_RCC}
contrib/kvasd${CMAKE_EXECUTABLE_SUFFIX}
)
qt5_use_modules (wsjtx Widgets OpenGL Network Multimedia)
if (UNIX)
if (NOT WSJT_SKIP_MANPAGES)
add_subdirectory (manpages)
endif (NOT WSJT_SKIP_MANPAGES)
if (NOT APPLE)
add_subdirectory (debian)
endif (NOT APPLE)
add_dependencies (wsjtx manpages debian)
endif (UNIX)
set_target_properties (wsjtx PROPERTIES
MACOSX_BUNDLE_INFO_STRING "${WSJTX_DESCRIPTION_SUMMARY}"
MACOSX_BUNDLE_ICON_FILE "${WSJTX_ICON_FILE}"
MACOSX_BUNDLE_BUNDLE_VERSION ${wsjtx_VERSION}
MACOSX_BUNDLE_SHORT_VERSION_STRING "v${wsjtx_VERSION}"
MACOSX_BUNDLE_LONG_VERSION_STRING "Version ${wsjtx_VERSION}"
MACOSX_BUNDLE_BUNDLE_NAME "WSJT-X"
MACOSX_BUNDLE_COPYRIGHT "${PROJECT_COPYRIGHT}"
)
target_link_libraries (wsjtx wsjt wsjt_qt ${hamlib_LIBRARIES} ${FFTW3_LIBRARIES})
if (WIN32)
set_target_properties (
wsjtx
# ConfigTest
PROPERTIES LINK_FLAGS_RELEASE "${LINKER_FLAGS_RELEASE} -mwindows"
)
endif (WIN32)
#
# installation
#
install (TARGETS wsjtx
RUNTIME DESTINATION ${WSJT_BIN_DESTINATION}
LIBRARY DESTINATION ${WSJT_LIB_DESTINATION}
BUNDLE DESTINATION .
#COMPONENT Runtime
)
install (TARGETS jt9
RUNTIME DESTINATION ${WSJT_BIN_DESTINATION}
LIBRARY DESTINATION ${WSJT_LIB_DESTINATION}
BUNDLE DESTINATION ${WSJT_BIN_DESTINATION}
#COMPONENT Runtime
)
install (PROGRAMS
${CMAKE_BINARY_DIR}/contrib/kvasd${CMAKE_EXECUTABLE_SUFFIX}
DESTINATION ${WSJT_BIN_DESTINATION}
#COMPONENT Runtime
)
#
# uninstall support
#
configure_file (
"${CMAKE_CURRENT_SOURCE_DIR}/CMake/cmake_uninstall.cmake.in"
"${CMAKE_CURRENT_BINARY_DIR}/cmake_uninstall.cmake"
@ONLY)
add_custom_target (uninstall
"${CMAKE_COMMAND}" -P "${CMAKE_CURRENT_BINARY_DIR}/cmake_uninstall.cmake")
# creates svnversion.h using cmake script
add_custom_target (revisiontag
COMMAND ${CMAKE_COMMAND} -D SOURCE_DIR=${CMAKE_CURRENT_SOURCE_DIR} -D OUTPUT_DIR=${PROJECT_BINARY_DIR} -P ${CMAKE_CURRENT_SOURCE_DIR}/CMake/getsvn.cmake
COMMENT "Generating Subversion revision information"
VERBATIM
)
# explicitly say that the wsjt_qt depends on custom target, this is
# done indirectly so that the revisiontag target gets built exactly
# once per build
add_dependencies(wsjt_qt revisiontag)
#
# versioning and configuration
#
configure_file (
"${PROJECT_SOURCE_DIR}/wsjtx_config.h.in"
"${PROJECT_BINARY_DIR}/wsjtx_config.h"
)
include_directories ("${PROJECT_BINARY_DIR}")
if (NOT WIN32 AND NOT APPLE)
# install a desktop file so wsjtx appears in the application start
# menu with an icon
install (
FILES wsjtx.desktop
DESTINATION share/applications
#COMPONENT Runtime
)
install (
FILES icons/Unix/wsjtx_icon.png
DESTINATION share/pixmaps
#COMPONENT Runtime
)
endif (NOT WIN32 AND NOT APPLE)
#
# bundle fixup only done in Release or MinSizeRel configurations
#
if (NOT is_debug_build)
# get_target_property (QtCore_location Qt5::Core LOCATION)
# get_filename_component (QtCore_location ${QtCore_location} PATH)
# list (APPEND fixup_library_dirs ${QtCore_location})
if (APPLE)
set (CMAKE_POSTFLIGHT_SCRIPT
"${wsjtx_BINARY_DIR}/postflight.sh")
set (CMAKE_POSTUPGRADE_SCRIPT
"${wsjtx_BINARY_DIR}/postupgrade.sh")
configure_file ("${wsjtx_SOURCE_DIR}/postflight.sh.in"
"${wsjtx_BINARY_DIR}/postflight.sh")
configure_file ("${wsjtx_SOURCE_DIR}/postupgrade.sh.in"
"${wsjtx_BINARY_DIR}/postupgrade.sh")
endif ()
if (APPLE OR WIN32)
# install rules for including 3rd party libs such as Qt
# install a qt.conf file
install (CODE "
file (WRITE \"\$ENV{DESTDIR}\${CMAKE_INSTALL_PREFIX}/${WSJT_QT_CONF_DESTINATION}/qt.conf\"
\"[Paths]
\")
"
#COMPONENT Runtime
)
# if a system Qt is used (e.g. installed in /usr/lib/), it will not be included in the installation
set (fixup_exe "\${CMAKE_INSTALL_PREFIX}/${WSJT_BIN_DESTINATION}/${CMAKE_PROJECT_NAME}${CMAKE_EXECUTABLE_SUFFIX}")
#get_filename_component (hamlib_lib_dir ${hamlib_LIBRARIES} PATH)
if (APPLE)
# install required Qt plugins
install (
DIRECTORY
${QT_PLUGINS_DIR}/platforms
${QT_PLUGINS_DIR}/audio
DESTINATION ${WSJT_PLUGIN_DESTINATION}
CONFIGURATIONS Release MinSizeRel
#COMPONENT Runtime
FILES_MATCHING PATTERN "*${CMAKE_SHARED_LIBRARY_SUFFIX}"
PATTERN "*minimal*${CMAKE_SHARED_LIBRARY_SUFFIX}" EXCLUDE
PATTERN "*offscreen*${CMAKE_SHARED_LIBRARY_SUFFIX}" EXCLUDE
PATTERN "*_debug${CMAKE_SHARED_LIBRARY_SUFFIX}" EXCLUDE
)
# install (
# DIRECTORY
# ${QT_PLUGINS_DIR}/platforms
# ${QT_PLUGINS_DIR}/audio
# DESTINATION ${WSJT_PLUGIN_DESTINATION}
# CONFIGURATIONS Debug
# #COMPONENT Runtime
# FILES_MATCHING PATTERN "*_debug${CMAKE_SHARED_LIBRARY_SUFFIX}"
# PATTERN "*minimal*${CMAKE_SHARED_LIBRARY_SUFFIX}" EXCLUDE
# PATTERN "*offscreen*${CMAKE_SHARED_LIBRARY_SUFFIX}" EXCLUDE
# )
# add plugins path for Mac Bundle
install (CODE "
file (APPEND \"\$ENV{DESTDIR}\${CMAKE_INSTALL_PREFIX}/${WSJT_QT_CONF_DESTINATION}/qt.conf\"
\"Plugins = Plugins
\")
"
#COMPONENT Runtime
)
endif (APPLE)
if (WIN32)
# DLL directory
#set (hamlib_lib_dir ${hamlib_lib_dir}/../bin)
get_filename_component (fftw_lib_dir ${FFTW3F_LIBRARY} PATH)
list (APPEND fixup_library_dirs ${fftw_lib_dir})
# install required Qt plugins
install (
DIRECTORY
${QT_PLUGINS_DIR}/platforms
DESTINATION ${WSJT_PLUGIN_DESTINATION}
CONFIGURATIONS Release MinSizeRel
#COMPONENT Runtime
FILES_MATCHING PATTERN "*${CMAKE_SHARED_LIBRARY_SUFFIX}"
PATTERN "*minimal*${CMAKE_SHARED_LIBRARY_SUFFIX}" EXCLUDE
PATTERN "*offscreen*${CMAKE_SHARED_LIBRARY_SUFFIX}" EXCLUDE
PATTERN "*d${CMAKE_SHARED_LIBRARY_SUFFIX}" EXCLUDE
)
# install (
# DIRECTORY
# ${QT_PLUGINS_DIR}/platforms
# DESTINATION ${WSJT_PLUGIN_DESTINATION}
# CONFIGURATIONS Debug
# #COMPONENT Runtime
# FILES_MATCHING PATTERN "*d${CMAKE_SHARED_LIBRARY_SUFFIX}"
# PATTERN "*minimal*${CMAKE_SHARED_LIBRARY_SUFFIX}" EXCLUDE
# PATTERN "*offscreen*${CMAKE_SHARED_LIBRARY_SUFFIX}" EXCLUDE
# )
# add plugins path for WIN32
file (RELATIVE_PATH _plugins_path "${CMAKE_INSTALL_PREFIX}/${WSJT_QT_CONF_DESTINATION}" "${CMAKE_INSTALL_PREFIX}/${WSJT_PLUGIN_DESTINATION}")
install (CODE "
file (APPEND \"\$ENV{DESTDIR}\${CMAKE_INSTALL_PREFIX}/${WSJT_QT_CONF_DESTINATION}/qt.conf\"
\"Plugins = ${_plugins_path}
\")
"
#COMPONENT Runtime
)
# set (gp_tool "objdump") # we want MinGW tool - not MSVC (See GetPrerequisites.cmake)
endif (WIN32)
#list (APPEND fixup_library_dirs ${hamlib_lib_dir})
list (APPEND fixup_library_dirs ${hamlib_LIBRARY_DIRS})
install (CODE "
file (GLOB_RECURSE QTPLUGINS
\"\$ENV{DESTDIR}\${CMAKE_INSTALL_PREFIX}/${WSJT_PLUGIN_DESTINATION}/*${CMAKE_SHARED_LIBRARY_SUFFIX}\")
include (BundleUtilities)
set (BU_CHMOD_BUNDLE_ITEMS ON)
set (gp_tool ${gp_tool})
message (STATUS \"fixup_exe: ${fixup_exe}\")
fixup_bundle (\"${fixup_exe}\" \"\${QTPLUGINS}\" \"${fixup_library_dirs}\")
"
#COMPONENT Runtime
)
endif (APPLE OR WIN32)
endif (NOT is_debug_build)
#
# packaging
#
set (CPACK_PACKAGE_NAME "${CMAKE_PROJECT_NAME}")
set (CPACK_PACKAGE_VERSION_MAJOR ${WSJTX_VERSION_MAJOR})
set (CPACK_PACKAGE_VERSION_MINOR ${WSJTX_VERSION_MINOR})
set (CPACK_PACKAGE_VERSION_PATCH ${WSJTX_VERSION_PATCH})
if (WIN32)
set (CPACK_GENERATOR "NSIS")
elseif (APPLE)
set (CPACK_GENERATOR "DragNDrop" "PackageMaker")
else ()
#
# Derive the correct filename for a Debian package because the DEB
# generator doesn't do this correctly at present.
#
string (TOLOWER "${CPACK_PACKAGE_NAME}" CPACK_PACKAGE_NAME_LOWERCASE)
find_program (DPKG_PROGRAM dpkg DOC "dpkg program of Debian-based systems")
if (DPKG_PROGRAM)
execute_process (
COMMAND ${DPKG_PROGRAM} --print-architecture
OUTPUT_VARIABLE CPACK_DEBIAN_PACKAGE_ARCHITECTURE
OUTPUT_STRIP_TRAILING_WHITESPACE
)
set (DEBIAN_PACKAGE_FILE_NAME
"${CPACK_PACKAGE_NAME_LOWERCASE}_${wsjtx_VERSION}_${CPACK_DEBIAN_PACKAGE_ARCHITECTURE}")
else (DPKG_PROGRAM)
set (DEBIAN_PACKAGE_FILE_NAME
"${CPACK_PACKAGE_NAME_LOWERCASE}_${wsjtx_VERSION}_${CMAKE_SYSTEM_NAME}")
endif (DPKG_PROGRAM)
set (CPACK_DEBIAN_PACKAGE_PACKAGE_SHLIBDEPS ON)
set (CPACK_GENERATOR "DEB" "RPM" "TGZ")
endif ()
configure_file ("${PROJECT_SOURCE_DIR}/CMakeCPackOptions.cmake.in"
"${PROJECT_BINARY_DIR}/CMakeCPackOptions.cmake" @ONLY)
set (CPACK_PROJECT_CONFIG_FILE "${PROJECT_BINARY_DIR}/CMakeCPackOptions.cmake")
include (CPack)
Reference in New Issue View Git Blame Copy Permalink