WSJT-X/doc/user_guide/controls-functions-center.adoc
Joe Taylor a6dc737469 Changes to WSJT-X User Guide for v1.5.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@5442 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2015-05-28 14:36:41 +00:00

33 lines
1.3 KiB
Plaintext
Raw Blame History

This file contains ambiguous Unicode characters

This file contains Unicode characters that might be confused with other characters. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

// Status=review
At the center of the main window are a number of controls used when
making QSOs:
//.Misc Controls Center
image::images/misc-controls-center.png[align="center",alt="Misc Controls Center"]
* Check *Tx even* to transmit in even-numbered UTC minutes. Uncheck
this box to transmit in the odd minutes. This selection is made
automatically when you double-click on a decoded text line, as
described in the <<TUTORIAL,Basic Operating Tutorial>>.
* The Tx and Rx audio frequencies are usually set automatically by
double-clicking on decoded text or a signal in the waterfall. They
can also be adjusted with spinner controls.
* You can force Tx frequency to the current Rx frequency by clicking
the *Tx<Rx* button, and vice-versa for *Rx<Tx*. (Copy is from right
to left.) Check the box *Lock Tx=Rx* to make the frequencies always
track one another. The on-the-air frequency of your lowest JT9 or
JT65 tone is the sum of dial frequency and audio Tx frequency.
* The *Report* control lets you change a signal report that has been
inserted automatically. Most reports will fall in the range 26 to +10
dB. Remember that JT65 reports saturate at an upper limit of -1
dB.
IMPORTANT: When signals are close to or above 0 dB, you and your QSO
partner should probably reduce power. The WSJT modes are supposed to
be weak signal modes!