WSJT-X/Transceiver/Transceiver.hpp

#ifndef TRANSCEIVER_HPP__
#define TRANSCEIVER_HPP__

#include <iosfwd>

#include <boost/log/trivial.hpp>
#include <boost/log/sources/severity_channel_logger.hpp>

#include <QObject>

#include "qt_helpers.hpp"
#include "Radio.hpp"

class QString;

//
// Abstract Transceiver Interface
//
//  This is  the minimal  generic interface  to a  rig as  required by
//  wsjtx.
//
// Responsibilities
//
//  Provides a  Qt slot  to set  the frequency, mode  and PTT  of some
//  transceiver. This is a Qt slot so  that it may be invoked across a
//  thread boundary.
//
//  Provides a synchronisation Qt slot  which should be implemented in
//  sub-classes in such a way that  normal operation of the rig is not
//  disturbed.  This  is  intended  to   be  use  to  poll  rig  state
//  periodically and changing  VFO to read the other  VFO frequency or
//  mode for  example should  not be  done since  the operator  may be
//  tuning the VFO at the time and would be surprised by an unprompted
//  VFO change.
//
//  Provides a control interface using Qt  slots to start and stop the
//  rig control and PTT connections.
//
//  These  are Qt  slots rather  than the  constructor and  destructor
//  because   it   is   expected   that   the   concrete   Transceiver
//  implementations will run in a  separate thread from where they are
//  constructed.
//
//  Qt signals are defined to notify clients of asynchronous rig state
//  changes and failures.  These can and are expected  to cross thread
//  boundaries.
//
//  A  signal   finished()  is   defined  that   concrete  Transceiver
//  implementations must emit when they are ripe for destruction. This
//  is  intended to  be  used  by clients  that  move the  Transceiver
//  instance to  a thread  and need  to use  QObject::deleteLater() to
//  safely dispose of the Transceiver instance. Implementations should
//  expect Qt  slot calls  after emitting  finished, it  is up  to the
//  implementation whether these slot invocations are ignored.
//
class Transceiver
  : public QObject
{
  Q_OBJECT

public:
  using Frequency = Radio::Frequency;
  using logger_type = boost::log::sources::severity_channel_logger_mt<boost::log::trivial::severity_level>;

protected:
  Transceiver (logger_type *, QObject * parent);
  logger_type& logger () const {return *logger_;}

public:
  virtual ~Transceiver () {}

  enum MODE {UNK, CW, CW_R, USB, LSB, FSK, FSK_R, DIG_U, DIG_L, AM, FM, DIG_FM};
  Q_ENUM (MODE)

  //
  // Aggregation of all of the rig and PTT state accessible via this
  // interface.
  //
  class TransceiverState
  {
  public:
    TransceiverState ()
      : online_ {false}
      , rx_frequency_ {0}
      , tx_frequency_ {0}
      , mode_ {UNK}
      , split_ {Split::unknown}
      , ptt_ {false}
    {
    }

    bool online () const {return online_;}
    Frequency frequency () const {return rx_frequency_;}
    Frequency tx_frequency () const {return tx_frequency_;}
    bool split () const {return Split::on == split_;}
    MODE mode () const {return mode_;}
    bool ptt () const {return ptt_;}

    void online (bool state) {online_ = state;}
    void frequency (Frequency f) {rx_frequency_ = f;}
    void tx_frequency (Frequency f) {tx_frequency_ = f;}
    void split (bool state) {split_ = state ? Split::on : Split::off;}
    void mode (MODE m) {mode_ = m;}
    void ptt (bool state) {ptt_ = state;}

  private:
    bool online_;
    Frequency rx_frequency_;
    Frequency tx_frequency_;    // 0 means use Rx
    MODE mode_;
    enum class Split {unknown, off, on} split_;
    bool ptt_;
    // Don't forget to update the debug print and != operator if you
    // add more members here

    friend QDebug operator << (QDebug, TransceiverState const&);
    friend bool operator != (TransceiverState const&, TransceiverState const&);
    friend std::ostream& operator << (std::ostream&, Transceiver::TransceiverState const&);
  };

  //
  // The following  slots and signals are  expected to all run  in the
  // same thread which  is not necessarily the main GUI  thread. It is
  // up  to  the client  of  the  Transceiver  class to  organise  the
  // allocation to a thread and the lifetime of the object instances.
  //

  // Apply  state changes  to the  rig. The  sequence_number parameter
  // will  be included  in  any status  updates  generated after  this
  // transaction  is processed.  The sequence  number may  be used  to
  // ignore any status  updates until the results  of this transaction
  // have been processed thus avoiding any unwanted "ping-pong" due to
  // signals crossing in transit.
  Q_SLOT virtual void set (Transceiver::TransceiverState const&,
                           unsigned sequence_number) noexcept = 0;

  // Connect and disconnect.
  Q_SLOT virtual void start (unsigned sequence_number) noexcept = 0;
  Q_SLOT virtual void stop () noexcept = 0;

  //
  // asynchronous status updates
  //

  // 0 - 1Hz
  // 1 - 10Hz rounded
  // -1 - 10Hz truncated
  // 2 - 100Hz rounded
  // -2 - 100Hz truncated
  Q_SIGNAL void resolution (int);

  // rig state changed
  Q_SIGNAL void update (Transceiver::TransceiverState const&,
                        unsigned sequence_number) const;

  // something went wrong - not recoverable, start new instance
  Q_SIGNAL void failure (QString const& reason) const;

  // Ready to be destroyed.
  Q_SIGNAL void finished () const;

private:
  logger_type mutable * logger_;
};

Q_DECLARE_METATYPE (Transceiver::TransceiverState);

#if !defined (QT_NO_DEBUG_STREAM)
QDebug operator << (QDebug, Transceiver::TransceiverState const&);
#endif

std::ostream& operator << (std::ostream&, Transceiver::TransceiverState const&);

ENUM_QDATASTREAM_OPS_DECL (Transceiver, MODE);
ENUM_CONVERSION_OPS_DECL (Transceiver, MODE);

bool operator != (Transceiver::TransceiverState const&, Transceiver::TransceiverState const&);
bool operator == (Transceiver::TransceiverState const&, Transceiver::TransceiverState const&);

#endif