WSJT-X/soundin.cpp
Joe Taylor 9fa4270b57 Thanks to G4WJS: SoundOut functions have been moved into the GUI thread.
git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3517 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2013-08-01 00:49:58 +00:00

376 lines
10 KiB
C++

#ifndef QAUDIO_INPUT
#include "soundin.h"
#include <QDateTime>
#include <QDebug>
#define FRAMES_PER_BUFFER 1024
#define NSMAX 6827
#define NTMAX 120
extern "C" {
#include <portaudio.h>
extern struct {
float ss[184*NSMAX]; //This is "common/jt9com/..." in fortran
float savg[NSMAX];
// float c0[2*NTMAX*1500];
short int d2[NTMAX*12000];
int nutc; //UTC as integer, HHMM
int ndiskdat; //1 ==> data read from *.wav file
int ntrperiod; //TR period (seconds)
int mousefqso; //User-selected QSO freq (kHz)
int newdat; //1 ==> new data, must do long FFT
int npts8; //npts in c0() array
int nfa; //Low decode limit (Hz)
int nfb; //High decode limit (Hz)
int ntol; //+/- decoding range around fQSO (Hz)
int kin;
int nzhsym;
int nsave;
int nagain;
int ndepth;
int ntxmode;
int nmode;
char datetime[20];
} jt9com_;
}
//--------------------------------------------------------------- a2dCallback
int a2dCallback( const void *inputBuffer, void * /* outputBuffer */,
unsigned long framesToProcess,
const PaStreamCallbackTimeInfo * /* timeInfo */,
PaStreamCallbackFlags statusFlags,
void *userData )
// This routine called by the PortAudio engine when samples are available.
// It may be called at interrupt level, so don't do anything
// that could mess up the system like calling malloc() or free().
{
SoundInput::CallbackData * udata = reinterpret_cast<SoundInput::CallbackData *>(userData);
int nbytes,k;
if( (statusFlags&paInputOverflow) != 0) {
qDebug() << "Input Overflow in a2dCallback";
}
if(udata->bzero)
{ //Start of a new Rx sequence
udata->kin = 0; //Reset buffer pointer
udata->bzero = false;
}
nbytes=2*framesToProcess; //Bytes per frame
k=udata->kin;
if(udata->monitoring) {
memcpy(&jt9com_.d2[k],inputBuffer,nbytes); //Copy all samples to d2
}
udata->kin+=framesToProcess;
jt9com_.kin=udata->kin; // we are the only writer to jt9com_ so no MT issue here
return paContinue;
}
SoundInput::SoundInput()
: m_inStream(0),
m_TRperiod(60),
m_nsps(6912),
m_monitoring(false),
m_intervalTimer(this)
{
connect(&m_intervalTimer, SIGNAL(timeout()), this,SLOT(intervalNotify()));
}
void SoundInput::start(qint32 device)
{
stop();
//---------------------------------------------------- Soundcard Setup
PaError paerr;
PaStreamParameters inParam;
m_callbackData.kin = 0; //Buffer pointer
m_callbackData.bzero = false; //Flag to request reset of kin
m_callbackData.monitoring = m_monitoring;
inParam.device=device; //### Input Device Number ###
inParam.channelCount=1; //Number of analog channels
inParam.sampleFormat=paInt16; //Get i*2 from Portaudio
inParam.suggestedLatency=0.05;
inParam.hostApiSpecificStreamInfo=NULL;
paerr=Pa_IsFormatSupported(&inParam,NULL,12000.0);
if(paerr<0) {
emit error("PortAudio says requested soundcard format not supported.");
}
paerr=Pa_OpenStream(&m_inStream, //Input stream
&inParam, //Input parameters
NULL, //No output parameters
12000.0, //Sample rate
FRAMES_PER_BUFFER, //Frames per buffer
// paClipOff+paDitherOff, //No clipping or dithering
paClipOff, //No clipping
a2dCallback, //Input callback routine
&m_callbackData); //userdata
paerr=Pa_StartStream(m_inStream);
if(paerr<0) {
emit error("Failed to start audio input stream.");
return;
}
m_ntr0 = 99; // initial value higher than any expected
m_intervalTimer.start(100);
m_ms0 = QDateTime::currentMSecsSinceEpoch();
m_nsps0 = 0;
}
void SoundInput::intervalNotify()
{
m_callbackData.monitoring = m_monitoring; // update monitoring
// status
qint64 ms = QDateTime::currentMSecsSinceEpoch();
ms=ms % 86400000;
int nsec = ms/1000; // Time according to this computer
int ntr = nsec % m_TRperiod;
int k=m_callbackData.kin; // get a copy of kin to mitigate the
// potential race condition with the
// callback handler when a buffer
// reset is requested below
// Reset buffer pointer and symbol number at start of minute
if(ntr < m_ntr0 or !m_monitoring or m_nsps!=m_nsps0) {
m_nstep0=0;
m_nsps0=m_nsps;
m_callbackData.bzero = true; // request callback to reset buffer pointer
}
if(m_monitoring) {
int kstep=m_nsps/2;
// m_step=k/kstep;
m_step=(k-1)/kstep;
if(m_step != m_nstep0) {
emit readyForFFT(k-1); //Signal to compute new FFTs
m_nstep0=m_step;
}
}
m_ntr0=ntr;
}
SoundInput::~SoundInput()
{
if (m_inStream)
{
Pa_CloseStream(m_inStream), m_inStream = 0;
}
}
void SoundInput::stop()
{
m_intervalTimer.stop();
if (m_inStream)
{
Pa_StopStream(m_inStream);
Pa_CloseStream(m_inStream), m_inStream = 0;
}
}
#else // QAUDIO_INPUT
#include "soundin.h"
#include <QDateTime>
#define FRAMES_PER_BUFFER 1024
#define NSMAX 6827
#define NTMAX 120
extern "C" {
#include <portaudio.h>
extern struct {
float ss[184*NSMAX]; //This is "common/jt9com/..." in fortran
float savg[NSMAX];
// float c0[2*NTMAX*1500];
short int d2[NTMAX*12000];
int nutc; //UTC as integer, HHMM
int ndiskdat; //1 ==> data read from *.wav file
int ntrperiod; //TR period (seconds)
int mousefqso; //User-selected QSO freq (kHz)
int newdat; //1 ==> new data, must do long FFT
int npts8; //npts in c0() array
int nfa; //Low decode limit (Hz)
int nfb; //High decode limit (Hz)
int ntol; //+/- decoding range around fQSO (Hz)
int kin;
int nzhsym;
int nsave;
int nagain;
int ndepth;
int ntxmode;
int nmode;
char datetime[20];
} jt9com_;
}
QString reportAudioError(QAudio::Error audioError)
{
switch (audioError) {
case QAudio::NoError: Q_ASSERT(false);
case QAudio::OpenError: return QObject::tr(
"An error opening the audio device has occurred.");
case QAudio::IOError: return QObject::tr(
"An error occurred during read/write of audio device.");
case QAudio::UnderrunError: return QObject::tr(
"Audio data not being fed to the audio device fast enough.");
case QAudio::FatalError: return QObject::tr(
"Non-recoverable error, audio device not usable at this time.");
}
Q_ASSERT(false);
return "";
}
SoundInput::SoundInput()
: m_dataSinkBusy(false),
m_TRperiod(60),
m_nsps(6912),
m_monitoring(false),
m_intervalTimer(this)
{
// qDebug() << "A";
connect(&m_intervalTimer, SIGNAL(timeout()), this,SLOT(intervalNotify()));
}
void SoundInput::start(qint32 device)
{
stop();
//---------------------------------------------------- Soundcard Setup
m_callbackData.kin=0; //Buffer pointer
m_callbackData.ncall=0; //Number of callbacks
m_callbackData.bzero=false; //Flag to request reset of kin
m_callbackData.monitoring=m_monitoring;
//### Temporary: hardwired device selection
QAudioDeviceInfo DeviceInfo;
QList<QAudioDeviceInfo> m_InDevices;
QAudioDeviceInfo m_InDeviceInfo;
m_InDevices = DeviceInfo.availableDevices(QAudio::AudioInput);
inputDevice = m_InDevices.at(0);
//###
// qDebug() << "B" << m_InDevices.length() << inputDevice.deviceName();
const char* pcmCodec = "audio/pcm";
QAudioFormat audioFormat = inputDevice.preferredFormat();
audioFormat.setChannelCount(1);
audioFormat.setCodec(pcmCodec);
audioFormat.setSampleRate(12000);
audioFormat.setSampleType(QAudioFormat::SignedInt);
audioFormat.setSampleSize(16);
// qDebug() << "C" << audioFormat << audioFormat.isValid();
if (!audioFormat.isValid()) {
emit error(tr("Requested audio format is not available."));
return;
}
audioInput = new QAudioInput(inputDevice, audioFormat);
// qDebug() << "D" << audioInput->error() << QAudio::NoError;
if (audioInput->error() != QAudio::NoError) {
emit error(reportAudioError(audioInput->error()));
return;
}
stream = audioInput->start();
// qDebug() << "E" << stream->errorString();
m_ntr0 = 99; // initial value higher than any expected
m_nBusy = 0;
m_intervalTimer.start(100);
m_ms0 = QDateTime::currentMSecsSinceEpoch();
m_nsps0 = 0;
}
void SoundInput::intervalNotify()
{
m_callbackData.monitoring=m_monitoring;
qint64 ms = QDateTime::currentMSecsSinceEpoch();
ms=ms % 86400000;
int nsec = ms/1000; // Time according to this computer
int ntr = nsec % m_TRperiod;
static int k=0;
// qDebug() << "a" << ms << nsec;
// Reset buffer pointer and symbol number at start of minute
if(ntr < m_ntr0 or !m_monitoring or m_nsps!=m_nsps0) {
m_nstep0=0;
m_nsps0=m_nsps;
m_callbackData.bzero=true;
k=0;
}
// int k=m_callbackData.kin;
// How many new samples are available?
const qint32 bytesReady = audioInput->bytesReady();
// qDebug() << "b" << bytesReady;
Q_ASSERT(bytesReady >= 0);
Q_ASSERT(bytesReady % 2 == 0);
if (bytesReady == 0) {
return;
}
qint32 bytesRead;
bytesRead = stream->read((char*)&jt9com_.d2[k], bytesReady); // Get the new samples
k += bytesRead/2;
// qDebug() << "c" << bytesReady << bytesRead;
Q_ASSERT(bytesRead <= bytesReady);
if (bytesRead < 0) {
emit error(tr("audio stream QIODevice::read returned -1."));
return;
}
Q_ASSERT(bytesRead % 2 == 0);
if(m_monitoring) {
int kstep=m_nsps/2;
m_step=(k-1)/kstep;
if(m_step != m_nstep0) {
if(m_dataSinkBusy) {
m_nBusy++;
} else {
emit readyForFFT(k-1); //Signal to compute new FFTs
}
m_nstep0=m_step;
}
}
m_ntr0=ntr;
}
SoundInput::~SoundInput()
{
/*
if (m_inStream)
{
Pa_CloseStream(m_inStream), m_inStream = 0;
}
*/
}
/*
// memcpy(jt9com_.d2[k],buf0,bytesRead);
// k+=bytesRead/2;
for(int i=0; i<bytesRead/2; i++) {
jt9com_.d2[k++]=buf0[i];
}
*/
void SoundInput::stop()
{
m_intervalTimer.stop();
/*
if (m_inStream)
{
Pa_StopStream(m_inStream);
Pa_CloseStream(m_inStream), m_inStream = 0;
}
*/
}
#endif // QAUDIO_INPUT