WSJT-X/lib/qra66_decode.f90

module qra66_decode

   type :: qra66_decoder
      procedure(qra66_decode_callback), pointer :: callback
   contains
      procedure :: decode
   end type qra66_decoder

   abstract interface
      subroutine qra66_decode_callback (this,nutc,sync,nsnr,dt,freq,    &
         decoded,nap,qual,ntrperiod,fmid,w50)
         import qra66_decoder
         implicit none
         class(qra66_decoder), intent(inout) :: this
         integer, intent(in) :: nutc
         real, intent(in) :: sync
         integer, intent(in) :: nsnr
         real, intent(in) :: dt
         real, intent(in) :: freq
         character(len=37), intent(in) :: decoded
         integer, intent(in) :: nap
         real, intent(in) :: qual
         integer, intent(in) :: ntrperiod
         real, intent(in) :: fmid
         real, intent(in) :: w50
      end subroutine qra66_decode_callback
   end interface

contains

  subroutine decode(this,callback,iwave,nutc,nfqso,ntol,ndepth,   &
       mycall,hiscall,hisgrid)

    use timer_module, only: timer
    use packjt
    use, intrinsic :: iso_c_binding
    parameter (NFFT1=15*12000,NFFT2=15*6000)
    class(qra66_decoder), intent(inout) :: this
    procedure(qra66_decode_callback) :: callback
    character(len=12) :: mycall, hiscall
    character(len=6) :: hisgrid
    character*37 decoded
    integer*2 iwave(NFFT1)                 !Raw data
    integer dat4(12)
    logical lapdx,ltext
    complex c0(0:NFFT1-1)                  !Analytic signal, 6000 S/s
    real s3(-64:127,63)
    real a(5)
    data nc1z/-1/,nc2z/-1/,ng2z/-1/,maxaptypez/-1/
    save nc1z,nc2z,ng2z,maxaptypez

    this%callback => callback
    nsps=1920
    baud=12000.0/nsps
    df1=12000.0/NFFT1
    
    if(nutc.eq.-999) print*,lapdx,nfa,nfb,nfqso  !Silence warning

! Prime the QRA decoder for possible use of AP
    call packcall(mycall(1:6),nc1,ltext)
    call packcall(hiscall(1:6),nc2,ltext)
    call packgrid(hisgrid(1:4),ng2,ltext)
    nSubmode=0
    b90=20.0                 !8 to 25 is OK; not very critical
    nFadingModel=1

! AP control could be done differently, but this works well:
    maxaptype=0
    if(ndepth.eq.2) maxaptype=3
    if(ndepth.eq.3) maxaptype=5

    if(nc1.ne.nc1z .or. nc2.ne.nc2z .or. ng2.ne.ng2z .or.            &
         maxaptype.ne.maxaptypez) then
       do naptype=0,maxaptype
          if(naptype.eq.2 .and. maxaptype.eq.4) cycle
          call qra64_dec(s3,nc1,nc2,ng2,naptype,1,nSubmode,b90,      &
               nFadingModel,dat4,snr2,irc)
       enddo
       nc1z=nc1
       nc2z=nc2
       ng2z=ng2
       maxaptypez=maxaptype
    endif
    naptype=maxaptype

! Downsample to give complex data at 6000 S/s
    fac=2.0/NFFT1
    c0=fac*iwave
    call four2a(c0,NFFT1,1,-1,1)           !Forward c2c FFT
    c0(NFFT2/2+1:NFFT2)=0.                 !Zero the top half
    c0(0)=0.5*c0(0)
    call four2a(c0,nfft2,1,1,1)            !Inverse c2c FFT

    call timer('sync66  ',0)
    call sync66(iwave,15*12000,nsps,nfqso,ntol,xdt,f0,snr1)
    call timer('sync66  ',1)
    jpk=(xdt+0.5)*6000 - 384               !### Empirical ###
    if(jpk.lt.0) jpk=0
    a=0.
    a(1)=-(f0 + 2.0*baud)                  !Data tones start 2 bins higher
    call twkfreq(c0,c0,15*6000,6000.0,a)
    xdt=jpk/6000.0 - 0.5
    call spec66(c0(jpk:jpk+85*NSPS/2-1),s3)

    do j=1,63                              !Normalize to symbol baseline
       call pctile(s3(:,j),192,40,base)
       s3(:,j)=s3(:,j)/base
    enddo

    s3max=20.0
    do j=1,63                              !Apply AGC to suppress pings
     xx=maxval(s3(-64:127,j))
     if(xx.gt.s3max) s3(-64:127,j)=s3(-64:127,j)*s3max/xx
    enddo

!Call Nico's QRA64 decoder
    call timer('qra64_de',0)
    call qra64_dec(s3,nc1,nc2,ng2,naptype,0,nSubmode,b90,      &
         nFadingModel,dat4,snr2,irc)
    call timer('qra64_de',1)
    snr2=snr2 + 5.563                      !10*log(6912/1920)
    if(irc.gt.0) call badmsg(irc,dat4,nc1,nc2,ng2)

    decoded='                                     '
    if(irc.ge.0) then
       call unpackmsg(dat4,decoded)               !Unpack the user message
       call fmtmsg(decoded,iz)
       if(index(decoded,"000AAA ").ge.1) then
! Suppress a certain type of garbage decode.
          decoded='                      '
          irc=-1
       endif
       nsnr=nint(snr2)
       call this%callback(nutc,sync,nsnr,xdt,f0,decoded,              &
            irc,qual,ntrperiod,fmid,w50)
    else
       snr2=0.
       nsnr=-22
!### TEMPORARY? ###       
       call this%callback(nutc,sync,nsnr,xdt,f0,decoded,              &
            irc,qual,ntrperiod,fmid,w50)
!###
    endif

!    write(61,3061) nutc,irc,xdt,f0,snr1,snr2,trim(decoded)
!3061 format(i6.6,i4,4f10.2,2x,a)

    return
  end subroutine decode

end module qra66_decode