WSJT-X/doc/source/example1-decoding-controls.adoc
Greg Beam 23aff84fbb User Guide Docs Update
* Moved doc/source/*.txt to AsciiDoc ext source/*.adoc
- Correctly identifies AsciiDoc files

* wsjtx-main.adoc
- Updated links and include:: for *.adoc name change

* Added and updated rig-config-* files.
* Added inital draft of quick-reference.adoc

* build-doc.sh
- Updated the script to build new files and .adoc name change

* Removed:
- yaesu.txt rigtemplate.txt rig-configuration.txt




git-svn-id: svn+ssh://svn.code.sf.net/p/wsjt/wsjt/branches/wsjtx@3662 ab8295b8-cf94-4d9e-aec4-7959e3be5d79
2014-01-25 22:26:21 +00:00

52 lines
2.3 KiB
Plaintext
Raw Blame History

This file contains ambiguous Unicode characters

This file contains Unicode characters that might be confused with other characters. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

// Status=review
- To gain some feeling for the controls you will use when making QSOs, try
clicking with the mouse on the decoded text lines and on the waterfall spectral
display. You should be able to confirm the following behavior:
- Double-click on either of the decoded lines highlighted in green. This action
should produce the following:
** Copies call-sign and locater of a station calling CQ to the “DX Call”
and “DX grid” entry fields.
** Generates suitable messages for a minimal QSO and checks or clears the Tx
even box so that you will transmit in the proper (odd or even) minutes.
** Rx and Tx frequency markers will be moved to the CQ-ing stations frequency,
and the Gen Msg (“generated message”) radio button at bottom right of the main
window will be selected.
** If you had checked “Double-click on call sets Tx Enable” on the Setup menu,
Enable Tx would also be activated, and you would start to transmit automatically,
at the appropriate time.
- Double-click on the decoded line with the message “K1JT N5KDV EM41”,
highlighted in [red]*RED*.
- Results will be similar to (a), except the Tx frequency ([red]*RED* marker) is
not moved. Such messages are usually in response to your own CQ, or from a
tail-ender, and you probably want your Tx frequency to stay where it was.
- By holding down the Ctrl key when double-clicking on the decoded line
(or checking Lock Tx=Rx) you can cause both Tx and Rx frequencies to be moved.
- Double-click on the message from KF4RWA in either window. He is
sending “73” to K1JT, signifying that the QSO is over. Most likely you
want to send 73 to him, so the message “KF4RWA K1JT 73” is automatically
generated and selected for your next transmission. (Alternatively, you might
choose to send a free text message or to call CQ again.)
- Clicking on the waterfall moves the Rx frequency ([green]*GREEN* marker) to the
selected frequency.
- Ctrl-click on waterfall moves both Rx and Tx frequencies.
- Double-click on the waterfall moves the Rx frequency and causes a
narrow-band decode there at the new QSO frequency. Decoded text appears in the
right window only. Ctrl-double-click moves both Rx and Tx frequencies and
decodes at the new frequency.
- Clicking Erase clears the right window. Double-click on Erase to clear both
text windows.