Dependencies

Python 3.6

wget https://www.python.org/ftp/python/3.6.3/Python-3.6.3.tgz && \
tar -xvf Python-3.6.3.tgz && \
cd Python-3.6.3 && \
sudo ./configure --enable-optimizations && \
make -j32 && \
sudo make install && \
sudo update-alternatives --install /usr/bin/python python /usr/local/bin/python3.6 60

pip3.6 install --upgrade pip

Ninja

Using official version (may be outdated)

sudo apt install ninja

Building from source

apt-get purge ninja

git clone git://github.com/ninja-build/ninja.git && \
cd ninja && \
git checkout release && \
./configure.py --bootstrap && \
mv ninja /usr/local/bin/

Meson

pip3.6 install meson

objcopy

objcopy must be build from source because the option "--add-symbol" is mouse likely not available...

apt-get install -y texinfo bison flex

git clone git://sourceware.org/git/binutils-gdb.git && cd binutils-gdb && \
git checkout binutils-2_32-branch && \
CXXFLAGS="-Wno-error=unused-function -O2" CFLAGS="-Wno-error=unused-function -O2" ./configure && \
make -j32 && \
make install

Building GLIB2.0

git clone https://github.com/GNOME/glib.git && \
cd glib && \
git checkout glib-2-62 && \
meson _build -Dlibmount=false --prefix=`pwd`/out --buildtype=release --default-library=both -Diconv=libc

ninja -C _build && \
ninja -C _build install && \
cd ..

Publishing GLIB2.0

export build_os_type=linux
export build_os_arch=amd64
export prebuild_path="`pwd`/glibc-prebuild/${build_os_type}_${build_os_arch}/"

git clone https://git.did.science/WolverinDEV/glibc-prebuild.git
[[ -d $prebuild_path ]] && rm -r "$prebuild_path"
mkdir $prebuild_path && \
cp -r glib/out/include/ $prebuild_path && \
cp -r glib/out/lib/ $prebuild_path

Building libnice

Building boringssl

git clone https://boringssl.googlesource.com/boringssl && cd boringssl && \
git checkout 1cc95ac0 # This version does TeaSpeak use

[[ "`getconf LONG_BIT`" != "64" ]] && { export _toolchain="-DCMAKE_TOOLCHAIN_FILE=../util/32-bit-toolchain.cmake"; }
cmake . -DCMAKE_INSTALL_PREFIX=`pwd`/out -DOPENSSL_NO_ASM=ON -DBUILD_SHARED_LIBS=ON -DCMAKE_BUILD_TYPE=Release $_toolchain && \
make -j32

Build libnice

apt-get install gtk-doc-tools
git clone https://github.com/libnice/libnice.git && cd libnice

export glib20_dir="`pwd`/../glibc-prebuild/linux_amd64/"
export glib20_lib_path="$glib20_dir/lib/"*"/"
export boringssl_path="`pwd`/../boringssl/"

#pkg-config --static --cflags glib-2.0 := -I/usr/include/glib-2.0 -I/usr/lib/x86_64-linux-gnu/glib-2.0/include
#pkg-config --static --libs glib-2.0 gio-2.0 gobject-2.0 := -pthread -lgio-2.0 -lz -lresolv -lselinux -lgmodule-2.0 -ldl -lgobject-2.0 -lffi -lglib-2.0 -lpcre
export GLIB_CFLAGS="-I$glib20_dir/include/glib-2.0 -I`echo "$glib20_dir/lib/"*"/glib-2.0/include"`"
export GLIB_LIBS="$glib20_lib_path/libgio-2.0.a -lz -lresolv $glib20_lib_path/libgmodule-2.0.a -ldl $glib20_lib_path/libgobject-2.0.a $glib20_lib_path/libffi.a $glib20_lib_path/libglib-2.0.a -lpcre -pthread"
export LDFLAGS="-L$boringssl_path/crypto/ -L$boringssl_path/ssl/"

./autogen.sh --prefix=`pwd`/out --with-pic --with-crypto-library=openssl --without-gstreamer --disable-assert --disable-gtk-doc --enable-static=no --enable-shared=yes && \
make && \
make install

cd ..

Publishing libnice

[[ -z "${build_os_type}" ]] && export build_os_type=linux
[[ -z "${build_os_type}" ]] && export build_os_arch=amd64
export prebuild_path="`pwd`/libnice-prebuild/${build_os_type}_${build_os_arch}/"

[[ ! -d libnice-prebuild ]] && git clone https://git.did.science/WolverinDEV/libnice-prebuild.git
[[ -d $prebuild_path ]] && rm -r "$prebuild_path"
mkdir $prebuild_path && \
cp -r libnice/out/include/ $prebuild_path && \
cp -r libnice/out/lib/ $prebuild_path

Troubleshooting

GLIB2.0 hangs on meson

Ninja may be too sold. It should work with 1.9.0.

export GLIB_LIBS="$glib20_lib_path/libgio-2.0.a -lz -lresolv $glib20_lib_path/libgmodule-2.0.a $glib20_lib_path/libgobject-2.0.a $glib20_lib_path/libffi.a $glib20_lib_path/libglib-2.0.a -lpcre -pthread"

4.1 KiB Raw Blame History