f4exb
|
860048a1d1
|
SDRdaemonFEC: implemented tx delay as percentage of UDP packet process time
|
2017-06-08 23:35:52 +02:00 |
|
f4exb
|
45b3c73c20
|
SDRdaemonFEC: GUI refactoring: changed status calculation so that it is OK when idle (256 blocks)
|
2017-06-08 19:21:33 +02:00 |
|
f4exb
|
5d4681bffa
|
SDRdaemonFEC: GUI refactoring (2)
|
2017-06-08 16:49:52 +02:00 |
|
f4exb
|
8ba113b641
|
SDRdaemonFEC: implemented events count
|
2017-06-08 15:31:24 +02:00 |
|
f4exb
|
ea5aa71ffc
|
SDRdaemonFEC: GUI refactoring (1)
|
2017-06-08 08:40:21 +02:00 |
|
f4exb
|
27eae5e3b4
|
SDRdaemonFEC: refactor to better look like SDRdaemonSink
|
2017-06-08 02:06:36 +02:00 |
|
f4exb
|
407976d4c3
|
SDRdaemonFEC: added a settings class
|
2017-06-08 00:29:15 +02:00 |
|
f4exb
|
a60fac0679
|
SDRDaemonSink: fixed deserialization
|
2017-06-08 00:21:46 +02:00 |
|
f4exb
|
0935071f97
|
SDRDaemonSink: set the Tx delay as a percentage of the nominal UDP block transmission time
|
2017-06-08 00:01:56 +02:00 |
|
f4exb
|
604273742a
|
AF squelch: reset after setting threshold. Removed NFM demod deferred init
|
2017-06-06 02:16:28 +02:00 |
|
f4exb
|
91021678b2
|
NFM Demod: try a deferred init to cure AF squelch init problem
|
2017-06-06 01:53:52 +02:00 |
|
f4exb
|
e4332a16b6
|
SDRDaemonSink: GUI cosmetic changes
|
2017-06-06 01:53:21 +02:00 |
|
f4exb
|
5e62da4437
|
Standardize all output sinks to the same ready/running/error color status
|
2017-06-05 23:00:28 +02:00 |
|
f4exb
|
34b1910cd0
|
SDRdaemonSink: fixed remote address in case FEC is activated
|
2017-06-05 18:52:32 +02:00 |
|
f4exb
|
a86819ea70
|
SDRdaemonSink: lower Tx queue length target to 5 and implement quick start kick off
|
2017-06-05 16:47:56 +02:00 |
|
f4exb
|
1642a0d92c
|
SDRdaemonSink: implemented Tx queue stabilization
|
2017-06-05 01:18:35 +02:00 |
|
f4exb
|
5b48a3f4a9
|
SDRdaemonSink: GUI: display queue length and quality metrics received from remote Tx
|
2017-06-04 11:43:26 +02:00 |
|
f4exb
|
7b63657fb7
|
SDRdaemonSink: basic message receive from remote
|
2017-06-04 08:47:58 +02:00 |
|
f4exb
|
9a8cc15d8f
|
NFM demod and AF squelch: fixed initialization and reset at each squelch change
|
2017-05-31 23:36:02 +02:00 |
|
f4exb
|
db1a620fc2
|
Attempt to fix AF squelch
|
2017-05-31 00:30:00 +02:00 |
|
f4exb
|
a217312032
|
SDRdaemonSink: activate GUI set and send buttons
|
2017-05-28 10:13:54 +02:00 |
|
f4exb
|
d6eb9788c4
|
HackRF input: force settings at start and on preset deserialization
|
2017-05-26 17:43:58 +02:00 |
|
f4exb
|
3b44a5367c
|
HackRF: fixed bandwidth selection
|
2017-05-26 17:42:57 +02:00 |
|
f4exb
|
2ae702763b
|
Fixed critical compiler warnings in Windows
|
2017-05-26 10:35:29 +02:00 |
|
f4exb
|
ebe428e89a
|
SDRdaemonSink: fixed cmake file for Debian
|
2017-05-26 01:39:14 +02:00 |
|
f4exb
|
042368d04f
|
SDRdaemonSink: updated cmake file for Debian
|
2017-05-26 01:35:06 +02:00 |
|
f4exb
|
59a4dab7df
|
All mod and demod plugins: try to fix channel power display
|
2017-05-26 01:19:36 +02:00 |
|
f4exb
|
3a3d8e3dcb
|
activated compiler warnings
|
2017-05-25 20:13:34 +02:00 |
|
f4exb
|
d6f62a69dd
|
SDRDaemonSink: removed from Windows build entirely
|
2017-05-23 14:31:42 +02:00 |
|
f4exb
|
c47c3fb5b1
|
SDRdaemon and SDRdaemonFEC: removed useless connection to not existing updateHardware slot
|
2017-05-23 01:50:17 +02:00 |
|
f4exb
|
32539aaf2b
|
SDRdaemonSink: fixed basic UDP sending
|
2017-05-23 01:41:30 +02:00 |
|
f4exb
|
3df388ea8a
|
SDRdaemonSink: fixed center frequency and sample rate transmission to remote
|
2017-05-22 02:53:21 +02:00 |
|
f4exb
|
d3d8871b7c
|
SDRdaemonSink: control communication (1)
|
2017-05-22 00:04:54 +02:00 |
|
f4exb
|
3d691ab416
|
SDRdaemonSink: apply settings
|
2017-05-21 20:13:17 +02:00 |
|
f4exb
|
e14d0179c5
|
SDRdaemonSink: updated GUI
|
2017-05-21 19:45:56 +02:00 |
|
f4exb
|
a26c6a6436
|
SDRdaemonSink: added the plugin class
|
2017-05-21 13:34:37 +02:00 |
|
f4exb
|
c762359649
|
SDRdaemonSink: added the output class and GUI with the build
|
2017-05-21 13:32:56 +02:00 |
|
f4exb
|
20d1ff5dda
|
SDRdaemonSink: added the output class but not in the build yet
|
2017-05-21 12:58:57 +02:00 |
|
f4exb
|
edc0c3d47c
|
SDRdaemonSink: added the thread worker class
|
2017-05-21 04:41:47 +02:00 |
|
f4exb
|
8b703a1302
|
SDRdaemonSink: added UDPSinkFEC class
|
2017-05-21 04:19:12 +02:00 |
|
f4exb
|
7f539f0314
|
TCP and UDP sources: removed useless dependency on QThread
|
2017-05-20 05:48:39 +02:00 |
|
f4exb
|
e946242fae
|
Updated documentation
|
2017-05-19 10:52:18 +02:00 |
|
f4exb
|
9d9aa64439
|
LimeSDR output: updated documentation
|
2017-05-18 21:30:40 +02:00 |
|
f4exb
|
d842b44c28
|
Value dials: implement Ctl to shift digits by 2. Updated documentation
|
2017-05-18 01:48:52 +02:00 |
|
f4exb
|
7a36ee716b
|
WFM modulator: use ValueDialZ for channel delta frequency value dial
|
2017-05-18 00:30:39 +02:00 |
|
f4exb
|
c9de989643
|
SSB modulator: use ValueDialZ for channel delta frequency value dial
|
2017-05-18 00:26:55 +02:00 |
|
f4exb
|
e23fa13d36
|
NFM modulator: use ValueDialZ for channel delta frequency value dial
|
2017-05-18 00:21:48 +02:00 |
|
f4exb
|
5c830f1028
|
ATV modulator: use ValueDialZ for channel delta frequency value dial
|
2017-05-18 00:16:07 +02:00 |
|
f4exb
|
8e98c7eef9
|
AM modulator: use ValueDialZ for channel delta frequency value dial
|
2017-05-18 00:12:04 +02:00 |
|
f4exb
|
1a9c422906
|
UDP source: use ValueDialZ for channel delta frequency value dial
|
2017-05-18 00:05:08 +02:00 |
|
f4exb
|
ba729a58ca
|
WFM demod: use ValueDialZ for channel delta frequency value dial
|
2017-05-18 00:01:46 +02:00 |
|
f4exb
|
9c9c74d24d
|
SSB demod: use ValueDialZ for channel delta frequency value dial
|
2017-05-17 23:57:54 +02:00 |
|
f4exb
|
1899ca788c
|
BFM demod: use ValueDialZ for channel delta frequency value dial
|
2017-05-17 23:52:10 +02:00 |
|
f4exb
|
14b7cb093e
|
ATV demod: use ValueDialZ for channel delta frequency value dial
|
2017-05-17 23:47:08 +02:00 |
|
f4exb
|
a11d8617b5
|
ChannelAnalyzerNG: use ValueDialZ for channel delta frequency value dial
|
2017-05-17 23:41:39 +02:00 |
|
f4exb
|
b31e0ace57
|
AM demod: use ValueDialZ for channel delta frequency value dial
|
2017-05-17 23:34:14 +02:00 |
|
f4exb
|
048ef1bf67
|
DSD demod: use ValueDialZ for channel delta frequency value dial
|
2017-05-17 23:22:17 +02:00 |
|
f4exb
|
83e44739b1
|
NFM demod: use ValueDialZ for channel delta frequency value dial
|
2017-05-17 23:05:47 +02:00 |
|
f4exb
|
e317f3762c
|
ValueDialZ: new value dial that handles negative values. Application in TCPsrc plugin
|
2017-05-17 19:36:36 +02:00 |
|
f4exb
|
579c05cfe5
|
Use doubles for all power calculations
|
2017-05-16 23:39:49 +02:00 |
|
f4exb
|
dafad384c8
|
Merged Sigysmund changes for Mac OS Sierra on v3.4.5
|
2017-05-16 23:01:44 +02:00 |
|
f4exb
|
bb849623bd
|
updated value dials with Windows compatible font and pointing hand
|
2017-05-16 22:35:44 +02:00 |
|
f4exb
|
396baa22c8
|
New value dial color schemes: new yellow color scheme for filters. Use it in LimeSDR plugins
|
2017-05-16 21:24:25 +02:00 |
|
f4exb
|
5a96b78454
|
File plugins and Channel analyzer NG: fixed thumbwheels so that they appear correctly in Windows version
|
2017-05-16 18:48:27 +02:00 |
|
f4exb
|
007ea19e36
|
Bumped version to 3.5.0
|
2017-05-16 18:38:39 +02:00 |
|
f4exb
|
6f9ef0eaf9
|
New value dial color schemes: propagate to all active plugins
|
2017-05-16 18:27:36 +02:00 |
|
f4exb
|
895051098d
|
New value dial color schemes. apply to ChannelAnalyzerNG, AM demod, DSD demod, NFM demod, BladeRF input, LimeSDR input and SDRDaemonFEC input
|
2017-05-16 17:48:12 +02:00 |
|
f4exb
|
416817d0b8
|
Mods and demods: prevent returning null or infinite values for squared magnitude
|
2017-05-16 17:46:44 +02:00 |
|
f4exb
|
747f400a78
|
New value dial color schemes. apply to File and AM demod plugins
|
2017-05-16 16:21:59 +02:00 |
|
f4exb
|
c9368a4dc0
|
Unixify some files
|
2017-05-16 16:16:05 +02:00 |
|
f4exb
|
da868edb68
|
New value dial color schemes
|
2017-05-16 09:07:58 +02:00 |
|
f4exb
|
ebe681fafe
|
SDRdaemonSink: GUI form
|
2017-05-15 23:51:50 +02:00 |
|
f4exb
|
ae97f6414b
|
SDRdaemonSink: (2)
|
2017-05-15 13:59:56 +02:00 |
|
f4exb
|
dec0dbeb4c
|
SDRdaemonSink: Windows build (1)
|
2017-05-15 13:47:57 +02:00 |
|
ZigaS
|
27aab58d92
|
MacOS(sierra) development environment.
Updated qmake project configs.
Deploy & Run script.
For now only hardware supported is HackRF.
|
2017-05-15 12:32:16 +02:00 |
|
f4exb
|
b53ebe4e96
|
NFM demod: fixed squelch button tooltip
|
2017-05-15 02:22:24 +02:00 |
|
f4exb
|
76267d35b7
|
LimeSDR output: updated documentation
|
2017-05-15 02:11:27 +02:00 |
|
f4exb
|
497ae3651e
|
SDRdaemonSink plugin (1)
|
2017-05-15 00:58:56 +02:00 |
|
f4exb
|
7c5da2e84d
|
LimeSDR: updated documentation
|
2017-05-13 18:09:30 +02:00 |
|
f4exb
|
e4d3f7eba7
|
AF squelch
|
2017-05-13 16:05:47 +02:00 |
|
f4exb
|
70d2ce6cec
|
NFM demod: smoothersterp optimization
|
2017-05-13 16:01:27 +02:00 |
|
f4exb
|
9dc6fac63e
|
NFM demod: force apply settings on start
|
2017-05-13 14:37:36 +02:00 |
|
f4exb
|
72b1bb8ac5
|
LimeSDR output: force apply settings on start
|
2017-05-13 14:36:44 +02:00 |
|
f4exb
|
154f22d268
|
LimeSDR input: force apply settings on start
|
2017-05-13 14:35:12 +02:00 |
|
f4exb
|
f57eecee86
|
NFM demod: af squeelch optimization
|
2017-05-13 12:10:03 +02:00 |
|
f4exb
|
68f742fad7
|
NFM demod: use smootherstep function for squelch attack and decay
|
2017-05-13 11:00:02 +02:00 |
|
f4exb
|
07c476f1d4
|
AM demod: enhance squelch ramp up and down (start and end at 0)
|
2017-05-13 09:42:01 +02:00 |
|
f4exb
|
375f327004
|
AM Demod: added optional bandpass boxcar filter
|
2017-05-12 19:21:52 +02:00 |
|
f4exb
|
b24ac8fa38
|
NFM demod: set appropriate audio multiplication factor
|
2017-05-12 17:01:46 +02:00 |
|
f4exb
|
6b4ba98e8e
|
AM demod: fill AGC average with ones when passing squelch threshold to avoid abrupt start at squelch opening
|
2017-05-12 16:38:58 +02:00 |
|
f4exb
|
f7373e8273
|
NFM Demod: bumped version to 3.4.5
|
2017-05-12 14:42:48 +02:00 |
|
f4exb
|
74f65fcbdc
|
NFM Demod: AF squelch crap
|
2017-05-12 14:41:27 +02:00 |
|
f4exb
|
07fc282d89
|
NFM demod: quadrature squelch attack and decay
|
2017-05-12 10:45:18 +02:00 |
|
f4exb
|
67f318e6ed
|
AM demod: restored squelch attack and decay
|
2017-05-12 04:42:06 +02:00 |
|
f4exb
|
a4c70f6e23
|
AM demod: bumped to version 3.4.5
|
2017-05-12 04:26:18 +02:00 |
|
f4exb
|
51d24102ed
|
AM demod: refactor demodulation
|
2017-05-12 04:25:14 +02:00 |
|
f4exb
|
225f25b9f4
|
LimeSDR: set NCO button appropriately
|
2017-05-12 03:31:42 +02:00 |
|
f4exb
|
ffb6ad3009
|
Use double storage type for all moving average instances
|
2017-05-12 00:03:56 +02:00 |
|
f4exb
|
6c5c08c6a4
|
AM demod: Use double for moving average storage type
|
2017-05-11 23:40:43 +02:00 |
|
f4exb
|
9fcc3cd426
|
Remved default constuctors in Moving average and AGC classes
|
2017-05-11 18:39:00 +02:00 |
|
f4exb
|
428d4d6b75
|
LimeSDR Windows build: build plugins
|
2017-05-09 12:16:09 +02:00 |
|
f4exb
|
ac7b5a9e6f
|
LimeSDR support: built-in LimeSuite for Debian: updated documentation
|
2017-05-09 04:26:51 +02:00 |
|
f4exb
|
8a364d36c9
|
LimeSDR support: built-in LimeSuite for Debian - added dependent include subdirectories
|
2017-05-09 03:46:43 +02:00 |
|
f4exb
|
b5f70bd7f6
|
LimeSDR support: built-in LimeSuite for Debian - use internal LimeSutie in plugins
|
2017-05-09 03:30:26 +02:00 |
|
f4exb
|
101de1bdee
|
LimeSDR: updated documentation telling that the plugins are not available in binary packages
|
2017-05-09 01:20:37 +02:00 |
|
f4exb
|
5163fcd96b
|
Removed LimeSDR support from Debian build if LimeSuite is not found
|
2017-05-09 01:15:58 +02:00 |
|
f4exb
|
10cbfb3b44
|
LimeSDR: added soft decimation/interpolation by 64
|
2017-05-08 17:30:08 +02:00 |
|
f4exb
|
a159e72e20
|
LimeSDR: updated documentation
|
2017-05-08 11:59:30 +02:00 |
|
f4exb
|
6fb6e35607
|
LimeSDR input: changed default gain to 50 dB
|
2017-05-08 11:03:05 +02:00 |
|
f4exb
|
a538fadb0c
|
LimeSDR: do not perform calibration in some cases
|
2017-05-08 11:02:31 +02:00 |
|
f4exb
|
140d12138a
|
LimeSDR output: set default gain to 4 db
|
2017-05-08 04:35:49 +02:00 |
|
f4exb
|
6f884d02c2
|
LimeSDR output: fixed send stream timeout (set to 1s)
|
2017-05-08 04:35:29 +02:00 |
|
f4exb
|
b232a21e2c
|
Bumped to version 3.4.3
|
2017-05-07 14:36:18 +02:00 |
|
f4exb
|
c2dc6b3594
|
DSD demodulator: updated documentation
|
2017-05-07 14:21:28 +02:00 |
|
f4exb
|
0e70c84f45
|
DSD demod: added possibility to enable/disable the symbol PLL
|
2017-05-07 10:23:37 +02:00 |
|
f4exb
|
5c8b7fd606
|
LimeSDR output: implemented antenna select
|
2017-05-07 03:05:29 +02:00 |
|
f4exb
|
df9e1d5900
|
LimeSDR input: antenna select fixes
|
2017-05-07 01:47:31 +02:00 |
|
f4exb
|
767b0af06c
|
DSD demod: updated documentation
|
2017-05-06 12:25:18 +02:00 |
|
f4exb
|
62cbcc3083
|
DSD demod: fixed possible buffer overrun with sprintf
|
2017-05-06 12:24:57 +02:00 |
|
f4exb
|
15443fb72d
|
DSD decoder: updated to get symbol PLL lock status. Bumped to version 3.4.2
|
2017-05-06 00:29:58 +02:00 |
|
f4exb
|
cf267b1254
|
Code warnings in Eclipse cleanup
|
2017-05-05 10:40:45 +02:00 |
|
f4exb
|
3fff41ce70
|
cppcheck fixes
|
2017-05-05 09:30:45 +02:00 |
|
f4exb
|
4818e629de
|
Bumped version to 3.4.1
|
2017-04-26 18:43:13 +02:00 |
|
f4exb
|
56582ab2b2
|
HackRF: rationalize start/stop device. Needs latest version of libhackrf (2017/03/01) and 2017.02.1 firmware
|
2017-04-26 16:35:05 +02:00 |
|
f4exb
|
6b97d9ea59
|
WFM Demod: implemented the signal gauge
|
2017-04-26 11:09:07 +02:00 |
|
f4exb
|
2c8374bd9e
|
WFM Demod: added documentation
|
2017-04-26 11:08:38 +02:00 |
|
f4exb
|
64de0eca3c
|
WFM demod: Set fixed geometry. Audio mute
|
2017-04-26 10:04:02 +02:00 |
|
f4exb
|
faffb7f7ca
|
WFM demod: fixed excursion handling. Changed discriminator
|
2017-04-26 04:33:25 +02:00 |
|
f4exb
|
54aa3ae27e
|
LimeSDR output: documentation
|
2017-04-24 17:51:07 +02:00 |
|
f4exb
|
2c618684c1
|
LimeSDR input: updated documentation
|
2017-04-24 15:19:11 +02:00 |
|
f4exb
|
0c62f50bc7
|
LimeSDR input: increased FIFO and buffer sizes
|
2017-04-24 09:57:21 +02:00 |
|
f4exb
|
5a588c6c63
|
LimeSDR output: optimize stream for max throughput
|
2017-04-24 09:56:52 +02:00 |
|
f4exb
|
d1e16b6ab0
|
LimeSDR output: regulate Tx output
|
2017-04-24 03:12:02 +02:00 |
|
f4exb
|
e0b7027756
|
LimeSDR input: added antenna selection
|
2017-04-23 16:23:01 +02:00 |
|
f4exb
|
79515407e1
|
LimeSDR output: set LPF default BW to 5.5 MHz
|
2017-04-23 10:30:56 +02:00 |
|
f4exb
|
465b073d77
|
LimeSDR: suspend/resume all buddies threads before/after open/close
|
2017-04-23 04:01:00 +02:00 |
|
f4exb
|
2369cb62af
|
LimeSDR output: handle cross allocation from Rx properly
|
2017-04-23 03:44:19 +02:00 |
|
f4exb
|
7ad6533b1f
|
LimeSDR: fixed reporting sample rate to buddies
|
2017-04-23 03:36:10 +02:00 |
|
f4exb
|
5556e65503
|
LimeSDR: corrected center frequency reporting
|
2017-04-23 02:50:19 +02:00 |
|
f4exb
|
098f8d8af2
|
LimeSDR output: debug (1)
|
2017-04-22 12:08:15 +02:00 |
|
f4exb
|
a2294df9ab
|
LimeSDR output: register as sink and not source
|
2017-04-22 11:52:02 +02:00 |
|
f4exb
|
69a746c816
|
LimeSDR output: added missing sources
|
2017-04-22 11:41:44 +02:00 |
|
f4exb
|
e07a730c4f
|
LimeSDR output: compilation succesful
|
2017-04-22 11:33:41 +02:00 |
|
f4exb
|
9f4eeda7c9
|
LimeSDR output: implemented common thread interface for input and output plugins to be able to start/stop thread from each other
|
2017-04-22 10:45:33 +02:00 |
|
f4exb
|
29a44a27f6
|
LimeSDR: implemented common thread interface for input and output plugins to be able to start/stop thread from each other
|
2017-04-22 10:40:57 +02:00 |
|
f4exb
|
f447c9f9bd
|
LimeSDR output (1)
|
2017-04-22 06:40:12 +02:00 |
|
f4exb
|
4ae889c06a
|
LimeSDR input: small code refactoring
|
2017-04-22 06:37:36 +02:00 |
|
Edouard Griffiths
|
37bbeb87cb
|
LimeSDR input: make sure fc pos is set to center
|
2017-04-21 20:30:25 +02:00 |
|
Edouard Griffiths
|
183b957f10
|
LimeSDR input: correct compile errors
|
2017-04-21 20:11:13 +02:00 |
|
f4exb
|
bef210d97f
|
LimeSDR input: removed FcPos from settings. Serialize/Deserialize NCO data
|
2017-04-21 16:46:09 +02:00 |
|
f4exb
|
688ca8ab46
|
LimeSDR input: handle center frequency and NCO for Tx buddies
|
2017-04-21 00:14:55 +02:00 |
|
f4exb
|
5c8732dc66
|
LimeSDR input: handle NCO for buddies
|
2017-04-20 23:43:24 +02:00 |
|
f4exb
|
099aa72fa2
|
LimeSDR: fix segfault when trying to get status on the uninitialized stream
|
2017-04-20 23:32:08 +02:00 |
|
f4exb
|
35f51bcdb2
|
LimeSDR input: handle NCO for self
|
2017-04-20 23:02:06 +02:00 |
|
f4exb
|
11e5b3a429
|
LimeSDR input: NCO support basic
|
2017-04-20 20:18:50 +02:00 |
|
f4exb
|
826941ba80
|
LimeSDR input: NCO support (draft #1)
|
2017-04-20 18:21:01 +02:00 |
|
f4exb
|
01b469ec80
|
LimeSDR input: suspend/resume Rx buddy thread when opening/closing so that the stream can be allocated/de-allocated properly
|
2017-04-20 01:39:05 +02:00 |
|
f4exb
|
edfcb36dab
|
LimeSDR input: removed stream status debug messages
|
2017-04-20 00:48:00 +02:00 |
|
f4exb
|
80acb46b0d
|
LimeSDR input: increase FIFO progress bar height
|
2017-04-20 00:47:18 +02:00 |
|
f4exb
|
0c285315d9
|
LimeSDR input: set FIFO progress bar stylesheet properly
|
2017-04-20 00:37:46 +02:00 |
|
f4exb
|
b8174714ff
|
LimeSDR: suspend buddies threads if changing critical values
|
2017-04-20 00:01:11 +02:00 |
|
f4exb
|
44e00e4aeb
|
LimeSDR input: start or stop thread only if not started or stopped
|
2017-04-19 23:07:32 +02:00 |
|
f4exb
|
2c5ea336da
|
LimeSDR input: status bar updated
|
2017-04-19 22:43:18 +02:00 |
|
f4exb
|
db67e07ab9
|
LimeSDR input: implemented basic stream reporting
|
2017-04-19 18:41:55 +02:00 |
|
f4exb
|
1a1c793014
|
LimeSDR input: moved thread suspend before device configuration update
|
2017-04-19 08:34:27 +02:00 |
|
f4exb
|
5cd430c245
|
LimeSDR input: moved stream setup and destruciton in open and close device methods respectively
|
2017-04-19 08:19:09 +02:00 |
|
f4exb
|
0847a8464c
|
LimeSDR input: fixed message passing between buddies
|
2017-04-19 01:04:57 +02:00 |
|
f4exb
|
09981263bc
|
LimeSDR input: suspend thread for configuration only if in running state
|
2017-04-19 00:09:24 +02:00 |
|
f4exb
|
3621849027
|
LimeSDR input: corrected getSampleRate not to divide source sample rate by hardware decimation
|
2017-04-19 00:00:47 +02:00 |
|
f4exb
|
763175ab55
|
LimeSDR input: suspend thread while changing configuration
|
2017-04-18 23:26:30 +02:00 |
|
f4exb
|
54f3a51203
|
LimeSDR input: channel #0 streaming
|
2017-04-18 22:22:21 +02:00 |
|
f4exb
|
d3312c90d4
|
LimeSDR input: start and stop stream before and after the read loop. Use actual number of samples for callback
|
2017-04-18 13:56:05 +02:00 |
|
f4exb
|
65cccbdd75
|
LimeSDR input: perform automatic calibration after configuration change
|
2017-04-18 13:50:28 +02:00 |
|
f4exb
|
3d12ff1de0
|
LimeSDR input: hard decimation is not on the host side
|
2017-04-18 13:33:33 +02:00 |
|
f4exb
|
5fb05cbfad
|
LimeSDR input: more debug messages
|
2017-04-18 08:35:25 +02:00 |
|
f4exb
|
6dd66cb23c
|
Set limesdrinput.cpp line endings to Unix
|
2017-04-18 02:12:15 +02:00 |
|
f4exb
|
1a22772744
|
LimeSDR input: fixed DSP message not sent to self when sending to buddies
|
2017-04-18 02:10:37 +02:00 |
|
f4exb
|
d7acf6f1f9
|
LimeSDR input: GUI updates
|
2017-04-18 02:01:30 +02:00 |
|
f4exb
|
c07d4483e0
|
LimeSDR input: use a value dial for the analog lowpass filter
|
2017-04-18 01:16:39 +02:00 |
|
f4exb
|
35f7124a74
|
LimeSDR input: debug (2)
|
2017-04-18 00:50:03 +02:00 |
|
f4exb
|
0013ab89ea
|
Bugfix: make sure device is not open when attempting to closing it
|
2017-04-17 12:00:13 +02:00 |
|
f4exb
|
d9b6dde304
|
LimeSDR input: extract serial number from LMS info string
|
2017-04-17 11:50:09 +02:00 |
|
f4exb
|
54599c1231
|
LimeSDR input: debug (1)
|
2017-04-17 11:24:56 +02:00 |
|
f4exb
|
7d61557204
|
LimeSDR support: ready
|
2017-04-17 10:05:05 +02:00 |
|
f4exb
|
05f7065515
|
ATV Demodulator: removed workaround to fix non const reference
|
2017-04-17 08:26:04 +02:00 |
|
f4exb
|
743fa145ec
|
ATV Demodulator: fixed complaint of some gcc versions that this is not a const reference
|
2017-04-17 02:37:42 +02:00 |
|
f4exb
|
b1e12954c7
|
BladeRF input: cleaned up useless MessageReportBladeRF
|
2017-04-17 01:28:05 +02:00 |
|
f4exb
|
67a149ac06
|
LimeSDR support (13)
|
2017-04-17 01:10:32 +02:00 |
|
f4exb
|
92e7bb8eba
|
LimeSDR support (12)
|
2017-04-16 19:30:46 +02:00 |
|
f4exb
|
7c1ff7c5ad
|
LimeSDR support: removed Debian specifics from the build as it will use LimeSuite as an external package
|
2017-04-16 09:58:35 +02:00 |
|
f4exb
|
561baf975d
|
LimeSDR support (11) compiles
|
2017-04-16 04:58:52 +02:00 |
|
f4exb
|
6ed2fbee10
|
LimeSDR support (10)
|
2017-04-15 11:45:01 +02:00 |
|
f4exb
|
0204cca9e3
|
LimeSDR support (9)
|
2017-04-15 10:31:16 +02:00 |
|
f4exb
|
3fa6c06d6f
|
LimeSDR support (8)
|
2017-04-15 04:52:12 +02:00 |
|
f4exb
|
67bb7353a8
|
LimeSDR support (7)
|
2017-04-14 18:30:37 +02:00 |
|
f4exb
|
414a7ccd87
|
Refactoring: removed device parameter from all start() methods in sample sink plugins
|
2017-04-14 03:44:49 +02:00 |
|
f4exb
|
b8623c90ce
|
Refactoring: removed device parameter from all start() methods in sample source plugins
|
2017-04-14 03:40:45 +02:00 |
|
f4exb
|
1e086fb303
|
FCDPro+: open/close new style
|
2017-04-14 03:29:50 +02:00 |
|
f4exb
|
f456293b84
|
FCDPro: open/close new style
|
2017-04-14 03:24:21 +02:00 |
|
f4exb
|
b05897d221
|
SDRplay: open/close new style
|
2017-04-14 03:17:04 +02:00 |
|
f4exb
|
3fa28dab30
|
SDRPlay: use device sequence number from device API
|
2017-04-14 02:49:41 +02:00 |
|
f4exb
|
d001099f7e
|
SDRPlay: init thread on start
|
2017-04-14 02:46:52 +02:00 |
|
f4exb
|
c8146808a2
|
SDRplay: changed placement of input object creation in the GUI
|
2017-04-14 02:22:37 +02:00 |
|
f4exb
|
00cf437bf2
|
HackRF: changed placement of input object creation in the GUI
|
2017-04-14 02:16:04 +02:00 |
|
f4exb
|
0a29f34b94
|
HackRF: open device by serial number
|
2017-04-14 02:09:36 +02:00 |
|
f4exb
|
01b2c42a5f
|
BladeRF: open device by serial number
|
2017-04-14 01:59:09 +02:00 |
|
f4exb
|
651303e860
|
HackRF: Rx/Tx opem/close new style corrections
|
2017-04-14 01:49:48 +02:00 |
|
f4exb
|
dea2764811
|
HackRF: Rx/Tx opem/close new style
|
2017-04-14 01:41:02 +02:00 |
|
f4exb
|
ecdc99f59b
|
HackRF input: refactoring: device open close moved in the constructor and destructor respectively of the input object
|
2017-04-14 00:14:40 +02:00 |
|
f4exb
|
afaf3428f5
|
BladeRF: Rx/Tx opem/close new style
|
2017-04-13 23:40:14 +02:00 |
|
f4exb
|
72a2fd9065
|
BladeRF output: refactoring: device open close moved in the constructor and destructor respectively of the input object
|
2017-04-13 21:26:36 +02:00 |
|
f4exb
|
e71e75126e
|
BladeRF output: changed placement of input object creation in the GUI
|
2017-04-13 20:34:14 +02:00 |
|
f4exb
|
922ee518b7
|
BladeRF input: changed placement of input object creation in the GUI
|
2017-04-13 20:32:10 +02:00 |
|
f4exb
|
5971c8a7ee
|
Airspy: fixed segfault when accessing non-initialized thread
|
2017-04-13 20:29:05 +02:00 |
|
f4exb
|
5dd934320c
|
BladeRF input: refactoring: device open close moved in the constructor and destructor respectively of the input object
|
2017-04-13 20:16:33 +02:00 |
|
f4exb
|
527b5ef2f5
|
LimeSDR support (6)
|
2017-04-13 18:18:15 +02:00 |
|
f4exb
|
bb812b4b47
|
Airspy: refactoring: device open close moved in the constructor and destructor respectively of the input object
|
2017-04-13 08:29:51 +02:00 |
|
f4exb
|
0c972455da
|
SDRDaemonFEC input: call input object destructor in GUI destructor (was missing)
|
2017-04-13 01:28:44 +02:00 |
|
f4exb
|
bb5fd95f33
|
RTL-SDR: refactoring: device open close moved in the constructor and destructor respectively of the input object
|
2017-04-13 01:21:25 +02:00 |
|
f4exb
|
934e73f7a7
|
RTL-SDR: moved input object creation at top of GUI comstructor
|
2017-04-12 23:41:30 +02:00 |
|
f4exb
|
3ab855c927
|
Sample sink plugins: removed useless init pure virtual method
|
2017-04-12 23:26:40 +02:00 |
|
f4exb
|
2136dc7672
|
Sample source plugins: removed useless init pure virtual method
|
2017-04-12 23:10:22 +02:00 |
|
f4exb
|
371bf9a5ec
|
LimeSDR support (5)
|
2017-04-12 17:25:26 +02:00 |
|
f4exb
|
3e3fd44ac0
|
LimeSDR support (4)
|
2017-04-12 00:55:00 +02:00 |
|
f4exb
|
4115c4e932
|
ATV Demod: fixed wrong initialization of frame rate. Fixes issue #22
|
2017-04-10 22:03:18 +02:00 |
|
f4exb
|
b17e999bc2
|
Updated plugins version
|
2017-04-09 20:35:53 +02:00 |
|
f4exb
|
a2157a224f
|
Continuous sample rate setting: updated related plugins documentation
|
2017-04-09 20:30:01 +02:00 |
|
f4exb
|
37952c9562
|
File sink plugin: ensure minimum width
|
2017-04-09 20:29:24 +02:00 |
|
f4exb
|
e0d41f2ecb
|
ATV Modulator: save overlay text in preset
|
2017-04-09 17:57:30 +02:00 |
|
f4exb
|
29b691a5af
|
ATV Demod: optimize scope feed
|
2017-04-09 17:43:23 +02:00 |
|
f4exb
|
40b5e7467f
|
ATV: updated documentation with latest changes
|
2017-04-09 11:35:22 +02:00 |
|
f4exb
|
e8415f7471
|
ATV: harmonize FM deviation between modulator and demodulator
|
2017-04-09 07:27:32 +02:00 |
|
f4exb
|
d43f59e93b
|
ATV: round to nearest 10 Hz when computing rationally decimated/interpolated sample rate
|
2017-04-09 06:48:29 +02:00 |
|
f4exb
|
8d019af9d6
|
ATV: more number of lines and FPS
|
2017-04-08 06:54:24 +02:00 |
|
f4exb
|
6f9a044ddc
|
ATV: use skip instead of leap for the horizontal sync skip mode
|
2017-04-08 05:35:09 +02:00 |
|
f4exb
|
f2d2978edc
|
ATV: updated documentation with new NBTV modes
|
2017-04-07 14:14:25 +02:00 |
|
f4exb
|
b0fcb142a0
|
ATV Demod: 1 Hz step from -2 to +2k for BFO
|
2017-04-07 02:26:34 +02:00 |
|
f4exb
|
74657509f5
|
ATV Demod: display negative top time and line time values as invalid
|
2017-04-07 01:44:49 +02:00 |
|
f4exb
|
58cc1d4438
|
ATV Demod: use rational decimator only as a filter with ratio 1.0 since code is not capable of handling a different sample rate from the main channel sample rate
|
2017-04-07 01:39:27 +02:00 |
|
f4exb
|
b486f63cb5
|
ATV Demod: sample rate reporting consistency fixes
|
2017-04-07 01:35:08 +02:00 |
|
f4exb
|
d301bd9ebd
|
File Sink output: fixed debug message
|
2017-04-06 20:13:31 +02:00 |
|
f4exb
|
73c9340e4e
|
File Sink: implemented arbitrary sample rate selection
|
2017-04-06 19:19:32 +02:00 |
|
f4exb
|
66e45e6638
|
ATV Modulator: ensure minimum overlay text font size
|
2017-04-06 08:36:24 +02:00 |
|
f4exb
|
cb9329e6de
|
ATV: added 120 lines mode
|
2017-04-06 08:28:30 +02:00 |
|
f4exb
|
7a7d65b999
|
ATV Demod: render image immediately when FPS is 25 or less to avoid partial image flickering
|
2017-04-06 08:18:12 +02:00 |
|
f4exb
|
b55d9324d1
|
ATV Demod: render image immediately when FPS is below 25 to avoid partial image flickering
|
2017-04-06 05:30:59 +02:00 |
|
f4exb
|
2fe0ec7dbd
|
ATV Modulator: hsync leap standard: fallen back horizotal sync leap placement update
|
2017-04-06 05:17:26 +02:00 |
|
f4exb
|
5cdcfdb9be
|
ATV Demod: classical vsync enhanced hsync correction: correcting only once per full frame with amortizing
|
2017-04-06 05:11:48 +02:00 |
|
f4exb
|
6dbbbec71d
|
ATV Demod: reset column count to exact value when no valid hsync
|
2017-04-06 03:28:21 +02:00 |
|
f4exb
|
74202b9a17
|
ATV Demod: help vsync to pass dead zone when lines are out of sync
|
2017-04-06 03:14:03 +02:00 |
|