196 Commits

Author	SHA1	Message	Date
f4exb	798d485342	LimeSDR: fixed issue #50 by moving channel acquisition and release at start and stop times. Corrections to buddies thread suspend/resume. Corrected void channel handling	2017-08-14 03:32:51 +02:00
f4exb	7182992d05	LimeSDR support removed from Windows: updated documentation	2017-08-10 02:26:11 +02:00
f4exb	7fba9b778d	Resizing of sample FIFO in output plugins: updated documentation	2017-08-10 00:52:20 +02:00
f4exb	75079de55d	BladeRF output: fixed sammple FIFO size for 32 and 64 (not implemented) interpolation	2017-08-09 22:59:46 +02:00
f4exb	e452a0882c	Bumped relevant plugins version to 3.5.5. Updated LimeSuite output documentation for LimeSuite 17.06.0	2017-08-09 02:00:13 +02:00
f4exb	6522f62326	BladeRF output: set FIFO size to 0.25s or 75 kS whichever is larger (300kS/s knee) except when decimating by 32 where a fixed 150 kS FIFO is used	2017-08-09 00:31:23 +02:00
f4exb	5829519116	BladeRF output: suspend thread when baseband sample rate changes	2017-08-08 23:09:51 +02:00
f4exb	3a9eec8463	HackRF output: set FIFO size to 0.25s or 150 kS whichever is larger (600kS/s knee)	2017-08-08 22:37:53 +02:00
f4exb	7b851e8326	HackRF output: suspend thread when baseband sample rate changes	2017-08-08 21:30:04 +02:00
f4exb	287bf8120d	HackRF output: removed useless method to set samplerate in the thread	2017-08-08 13:12:16 +02:00
f4exb	099583916f	LimeSDR output: use a stream FIFO size about 10% for a 5 MS/s rate (512k)	2017-08-08 01:19:11 +02:00
f4exb	894a4b2e94	Bumped to version 3.5.5	2017-08-08 00:29:18 +02:00
f4exb	3a84cd8526	LimeSDR output: used fixed time length with minimum length for sample FIFO	2017-08-08 00:25:13 +02:00
f4exb	ea4cb1bbfd	LimeSDR output: apply: defer config settings update after changes are made	2017-08-07 23:41:17 +02:00
f4exb	54a6bc6b62	LimeSDR output: removed useless update of sample rate	2017-08-07 23:22:29 +02:00
f4exb	566450501b	LimeSDR: apply settings: more data in debug message	2017-08-04 17:19:15 +02:00
f4exb	844628bc48	LimeSDR: corrected NCO de-tune when sample rate changes	2017-08-04 10:31:54 +02:00
f4exb	50c39b90a1	LimeSDR: clamp NCO lower limit to 0	2017-08-04 09:33:25 +02:00
f4exb	303cb1f3c3	bumped version to 3.5.2	2017-07-22 04:50:38 +02:00
f4exb	dd4ab0f0b5	HackRF: updated documentation	2017-07-21 08:34:54 +02:00
f4exb	361e8b0cd6	HackRF: implemented link Tx frequency to Rx frequency option	2017-07-21 00:44:30 +02:00
f4exb	258515b5de	HackRF: switch over Rx / Tx with the start button	2017-07-19 23:24:00 +02:00
f4exb	62b6281370	LimeSDR input: added DAC sample rate display	2017-07-07 00:01:01 +02:00
f4exb	77e11004b0	LimeSDR output: added DAC sample rate display	2017-07-06 22:59:29 +02:00
f4exb	4079d84d74	LimeSDR: updated GUI documentation	2017-07-04 08:39:46 +02:00
f4exb	efe921ffe7	LimeSDR output: optimize get device info by checking buddy leadership in the GUI	2017-07-03 23:29:06 +02:00
f4exb	034610721b	LimeSDR: fixed warnings	2017-07-03 22:35:08 +02:00
f4exb	99b100959f	LimeSDR output: implemented temperature reading	2017-07-03 16:58:46 +02:00
f4exb	3a24158743	Bumped to version 3.5.1	2017-06-27 05:53:09 +02:00
f4exb	a40a777e11	HackRF: extend LO ppm correction range to +/-30 (specs of AVX CX3225GB crystal: http://www.mouser.com/ds/2/40/cx3225gb_e-514151.pdf)	2017-06-24 23:42:03 +02:00
f4exb	8e63681185	HackRF: extend LO ppm correction range to +/-20	2017-06-24 22:29:47 +02:00
f4exb	e624141150	SDRdaemon plugins: fixed Debian build	2017-06-12 16:31:54 +02:00
f4exb	3650ca00b1	SDRdaemonSink documentation	2017-06-10 22:59:45 +02:00
f4exb	9c1a38a8cf	SDRdaemonFEC: implemented value dial for desired center frequency	2017-06-09 01:03:56 +02:00
f4exb	a60fac0679	SDRDaemonSink: fixed deserialization	2017-06-08 00:21:46 +02:00
f4exb	0935071f97	SDRDaemonSink: set the Tx delay as a percentage of the nominal UDP block transmission time	2017-06-08 00:01:56 +02:00
f4exb	e4332a16b6	SDRDaemonSink: GUI cosmetic changes	2017-06-06 01:53:21 +02:00
f4exb	5e62da4437	Standardize all output sinks to the same ready/running/error color status	2017-06-05 23:00:28 +02:00
f4exb	34b1910cd0	SDRdaemonSink: fixed remote address in case FEC is activated	2017-06-05 18:52:32 +02:00
f4exb	a86819ea70	SDRdaemonSink: lower Tx queue length target to 5 and implement quick start kick off	2017-06-05 16:47:56 +02:00
f4exb	1642a0d92c	SDRdaemonSink: implemented Tx queue stabilization	2017-06-05 01:18:35 +02:00
f4exb	5b48a3f4a9	SDRdaemonSink: GUI: display queue length and quality metrics received from remote Tx	2017-06-04 11:43:26 +02:00
f4exb	7b63657fb7	SDRdaemonSink: basic message receive from remote	2017-06-04 08:47:58 +02:00
f4exb	a217312032	SDRdaemonSink: activate GUI set and send buttons	2017-05-28 10:13:54 +02:00
f4exb	3b44a5367c	HackRF: fixed bandwidth selection	2017-05-26 17:42:57 +02:00
f4exb	ebe428e89a	SDRdaemonSink: fixed cmake file for Debian	2017-05-26 01:39:14 +02:00
f4exb	042368d04f	SDRdaemonSink: updated cmake file for Debian	2017-05-26 01:35:06 +02:00
f4exb	3a3d8e3dcb	activated compiler warnings	2017-05-25 20:13:34 +02:00
f4exb	d6f62a69dd	SDRDaemonSink: removed from Windows build entirely	2017-05-23 14:31:42 +02:00
f4exb	32539aaf2b	SDRdaemonSink: fixed basic UDP sending	2017-05-23 01:41:30 +02:00