mirror of
https://github.com/f4exb/sdrangel.git
synced 2024-11-15 21:01:45 -05:00
57 lines
2.3 KiB
Markdown
57 lines
2.3 KiB
Markdown
<h1>File sink plugin</h1>
|
||
|
||
<h2>Introduction</h2>
|
||
|
||
This output sample sink plugin sends its samples to file in the SDRangel .sdriq format.
|
||
|
||
The format is S16LE I/Q samples. Thus there are 4 bytes per sample. I and Q values are 16 bit signed integers. The file starts with a context header containing information about center frequency, sample rate and timestamp of the start of the recording. This header has a length which is a multiple of a sample size (normally 24 bytes thus 6 samples). Thus this file can be used as a raw I/Q file with S16LE samples tolerating a glitch at the start corresponding to the 6 "random" samples. For example in GNURadio you can simply specify your file source format as short complex.
|
||
|
||
You can also zap the 24 bytes header with this Linux command: `tail -c +25 myfile.sdriq > myfile.raw`
|
||
|
||
To convert in another format you may use the sox utility. For example to convert to 32 bit (float) complex samples do: `sox -r 48k −b 16 −e signed-integer -c 2 myfile.raw -e float -c 2 myfilec.raw`
|
||
|
||
Note that you have to specify the sampling rate and use .raw for the file extensions.
|
||
|
||
<h2>Build</h2>
|
||
|
||
The plugin is always built.
|
||
|
||
<h2>Interface</h2>
|
||
|
||
|
||
|
||
<h3>1: Start/Stop</h3>
|
||
|
||
Device start / stop button.
|
||
|
||
- Blue triangle icon: device is ready and can be started
|
||
- Red square icon: device is running and can be stopped
|
||
- Magenta (or pink) square icon: an error occured
|
||
|
||
<h3>2: File stream sample rate</h3>
|
||
|
||
This is the file stream sample rate in kS/s after interpolation (4) from the baseband stream. Thus this is the sample rate (7) multiplied by the interpolation factor (6).
|
||
|
||
<h3>3: Frequency</h3>
|
||
|
||
This is the center frequency in kHz that will be put in the file header.
|
||
|
||
<h3>4: Output file selection</h3>
|
||
|
||
Use this file dialog to specify the output file.
|
||
|
||
<h3>5: File name</h3>
|
||
|
||
This is the file path of the output file.
|
||
|
||
<h3>6: Interpolation factor</h3>
|
||
|
||
The baseband stream is interpolated by this value before being written to file. It can vary in powers of two from 1 (no interpolation) to 64.
|
||
|
||
<h3>7: Baseband sample rate</h3>
|
||
|
||
This is the baseband sample rate before interpolation in kS/s. Possible values are: 32, 48, 64, 72, 128, 192, 256, 288, 300, 384, 512, 1000 kS/s.
|
||
|
||
<h3>8: Time counter</h3>
|
||
|
||
This is the recording time count in HH:MM:SS.SSS |