1
0
mirror of https://github.com/craigerl/aprsd.git synced 2024-11-08 17:46:09 -05:00
aprsd/requirements.txt

117 lines
2.3 KiB
Plaintext
Raw Normal View History

#
2021-08-30 12:18:14 -04:00
# This file is autogenerated by pip-compile with python 3.8
# To update, run:
#
# pip-compile requirements.in
#
aioax25==0.0.10
Added the ability to use direwolf KISS socket This patch adds APRS KISS connectivity. I have tested this with a running Direwolf install via either a serial KISS connection or the optional new TCPKISS connection, both to Direwolf. This adds the new required aioax25 python library for the underlying KISS and AX25 support. NOTE: For the TCPKISS connection, this patch requires a pull request patch the aioax25 library to include a TCP Based KISS TNC client to enable the TCPKISS client So you will need to pull down this PR https://github.com/sjlongland/aioax25/pull/7 To enable this, Edit your aprsd.yml file and enable one of the 2 KISS connections. Only one is supported at a time. kiss: serial: enabled: True device: /dev/ttyS1 baudrate: 9600 or kiss: tcp: enabled: True host: "ip address/hostname of direwolf" port: "direwolf configured kiss port" This patch alters the Message object classes to be able to send messages out via the aprslib socket connection to the APRS-IS network on the internet, or via the direwolf KISS TCP socket, depending on the origination of the initial message coming in. If an APRS message comes in via APRS-IS, then replies will go out APRS-IS. IF an APRS message comes in via direwolf, then replies will go out via direwolf KISS TCP socket. Both can work at the same time. TODO: I need some real APRS message packets to verify that the new thread is processing packets correctly through the plugins and able to send the resulting messages back out to direwolf. Have a hard coded callsign for now in the kissclient consumer call, just so I can see messages coming in from direwolf. I dont' have an APRS capable radio at the moment to send messages directly to direwolf. Might need to write a simple python socket server to send fake APRS messages to aprsd kiss, just for finishing up development.
2021-02-25 21:01:52 -05:00
# via -r requirements.in
aprslib==0.6.47
# via -r requirements.in
backoff==1.11.1
# via opencage
bidict==0.21.2
# via python-socketio
certifi==2021.5.30
# via requests
cffi==1.14.6
# via cryptography
charset-normalizer==2.0.4
# via requests
click==8.0.1
# via
# -r requirements.in
# click-completion
# flask
2021-09-01 17:26:10 -04:00
click-completion==0.5.2
# via -r requirements.in
Added the ability to use direwolf KISS socket This patch adds APRS KISS connectivity. I have tested this with a running Direwolf install via either a serial KISS connection or the optional new TCPKISS connection, both to Direwolf. This adds the new required aioax25 python library for the underlying KISS and AX25 support. NOTE: For the TCPKISS connection, this patch requires a pull request patch the aioax25 library to include a TCP Based KISS TNC client to enable the TCPKISS client So you will need to pull down this PR https://github.com/sjlongland/aioax25/pull/7 To enable this, Edit your aprsd.yml file and enable one of the 2 KISS connections. Only one is supported at a time. kiss: serial: enabled: True device: /dev/ttyS1 baudrate: 9600 or kiss: tcp: enabled: True host: "ip address/hostname of direwolf" port: "direwolf configured kiss port" This patch alters the Message object classes to be able to send messages out via the aprslib socket connection to the APRS-IS network on the internet, or via the direwolf KISS TCP socket, depending on the origination of the initial message coming in. If an APRS message comes in via APRS-IS, then replies will go out APRS-IS. IF an APRS message comes in via direwolf, then replies will go out via direwolf KISS TCP socket. Both can work at the same time. TODO: I need some real APRS message packets to verify that the new thread is processing packets correctly through the plugins and able to send the resulting messages back out to direwolf. Have a hard coded callsign for now in the kissclient consumer call, just so I can see messages coming in from direwolf. I dont' have an APRS capable radio at the moment to send messages directly to direwolf. Might need to write a simple python socket server to send fake APRS messages to aprsd kiss, just for finishing up development.
2021-02-25 21:01:52 -05:00
contexter==0.1.4
# via signalslot
cryptography==3.4.7
# via pyopenssl
2021-09-01 17:26:10 -04:00
dnspython==2.1.0
# via
# eventlet
# py3-validate-email
eventlet==0.32.0
# via -r requirements.in
2021-09-01 17:26:10 -04:00
filelock==3.0.12
# via py3-validate-email
flask==2.0.1
2021-01-21 21:11:41 -05:00
# via
# -r requirements.in
# flask-classful
# flask-httpauth
# flask-socketio
2021-08-30 12:18:14 -04:00
flask-classful==0.14.2
# via -r requirements.in
flask-httpauth==4.4.0
# via -r requirements.in
flask-socketio==5.1.1
# via -r requirements.in
greenlet==1.1.1
# via eventlet
idna==3.2
2021-09-01 17:26:10 -04:00
# via
# py3-validate-email
# requests
imapclient==2.2.0
# via -r requirements.in
itsdangerous==2.0.1
# via flask
jinja2==3.0.1
# via
# click-completion
# flask
markupsafe==2.0.1
# via jinja2
opencage==2.0.0
# via -r requirements.in
pbr==5.6.0
# via -r requirements.in
pluggy==1.0.0
# via -r requirements.in
2021-09-01 17:26:10 -04:00
py3-validate-email==1.0.1
# via -r requirements.in
pycparser==2.20
# via cffi
pyopenssl==20.0.1
# via opencage
Added the ability to use direwolf KISS socket This patch adds APRS KISS connectivity. I have tested this with a running Direwolf install via either a serial KISS connection or the optional new TCPKISS connection, both to Direwolf. This adds the new required aioax25 python library for the underlying KISS and AX25 support. NOTE: For the TCPKISS connection, this patch requires a pull request patch the aioax25 library to include a TCP Based KISS TNC client to enable the TCPKISS client So you will need to pull down this PR https://github.com/sjlongland/aioax25/pull/7 To enable this, Edit your aprsd.yml file and enable one of the 2 KISS connections. Only one is supported at a time. kiss: serial: enabled: True device: /dev/ttyS1 baudrate: 9600 or kiss: tcp: enabled: True host: "ip address/hostname of direwolf" port: "direwolf configured kiss port" This patch alters the Message object classes to be able to send messages out via the aprslib socket connection to the APRS-IS network on the internet, or via the direwolf KISS TCP socket, depending on the origination of the initial message coming in. If an APRS message comes in via APRS-IS, then replies will go out APRS-IS. IF an APRS message comes in via direwolf, then replies will go out via direwolf KISS TCP socket. Both can work at the same time. TODO: I need some real APRS message packets to verify that the new thread is processing packets correctly through the plugins and able to send the resulting messages back out to direwolf. Have a hard coded callsign for now in the kissclient consumer call, just so I can see messages coming in from direwolf. I dont' have an APRS capable radio at the moment to send messages directly to direwolf. Might need to write a simple python socket server to send fake APRS messages to aprsd kiss, just for finishing up development.
2021-02-25 21:01:52 -05:00
pyserial==3.5
# via aioax25
python-engineio==4.2.1
# via python-socketio
python-socketio==5.4.0
# via flask-socketio
pytz==2021.1
# via -r requirements.in
pyyaml==5.4.1
# via -r requirements.in
requests==2.26.0
# via
# -r requirements.in
# opencage
# update-checker
shellingham==1.4.0
# via click-completion
Added the ability to use direwolf KISS socket This patch adds APRS KISS connectivity. I have tested this with a running Direwolf install via either a serial KISS connection or the optional new TCPKISS connection, both to Direwolf. This adds the new required aioax25 python library for the underlying KISS and AX25 support. NOTE: For the TCPKISS connection, this patch requires a pull request patch the aioax25 library to include a TCP Based KISS TNC client to enable the TCPKISS client So you will need to pull down this PR https://github.com/sjlongland/aioax25/pull/7 To enable this, Edit your aprsd.yml file and enable one of the 2 KISS connections. Only one is supported at a time. kiss: serial: enabled: True device: /dev/ttyS1 baudrate: 9600 or kiss: tcp: enabled: True host: "ip address/hostname of direwolf" port: "direwolf configured kiss port" This patch alters the Message object classes to be able to send messages out via the aprslib socket connection to the APRS-IS network on the internet, or via the direwolf KISS TCP socket, depending on the origination of the initial message coming in. If an APRS message comes in via APRS-IS, then replies will go out APRS-IS. IF an APRS message comes in via direwolf, then replies will go out via direwolf KISS TCP socket. Both can work at the same time. TODO: I need some real APRS message packets to verify that the new thread is processing packets correctly through the plugins and able to send the resulting messages back out to direwolf. Have a hard coded callsign for now in the kissclient consumer call, just so I can see messages coming in from direwolf. I dont' have an APRS capable radio at the moment to send messages directly to direwolf. Might need to write a simple python socket server to send fake APRS messages to aprsd kiss, just for finishing up development.
2021-02-25 21:01:52 -05:00
signalslot==0.1.2
# via aioax25
2021-09-01 17:26:10 -04:00
six==1.16.0
# via
# -r requirements.in
# click-completion
# eventlet
# imapclient
# pyopenssl
Added the ability to use direwolf KISS socket This patch adds APRS KISS connectivity. I have tested this with a running Direwolf install via either a serial KISS connection or the optional new TCPKISS connection, both to Direwolf. This adds the new required aioax25 python library for the underlying KISS and AX25 support. NOTE: For the TCPKISS connection, this patch requires a pull request patch the aioax25 library to include a TCP Based KISS TNC client to enable the TCPKISS client So you will need to pull down this PR https://github.com/sjlongland/aioax25/pull/7 To enable this, Edit your aprsd.yml file and enable one of the 2 KISS connections. Only one is supported at a time. kiss: serial: enabled: True device: /dev/ttyS1 baudrate: 9600 or kiss: tcp: enabled: True host: "ip address/hostname of direwolf" port: "direwolf configured kiss port" This patch alters the Message object classes to be able to send messages out via the aprslib socket connection to the APRS-IS network on the internet, or via the direwolf KISS TCP socket, depending on the origination of the initial message coming in. If an APRS message comes in via APRS-IS, then replies will go out APRS-IS. IF an APRS message comes in via direwolf, then replies will go out via direwolf KISS TCP socket. Both can work at the same time. TODO: I need some real APRS message packets to verify that the new thread is processing packets correctly through the plugins and able to send the resulting messages back out to direwolf. Have a hard coded callsign for now in the kissclient consumer call, just so I can see messages coming in from direwolf. I dont' have an APRS capable radio at the moment to send messages directly to direwolf. Might need to write a simple python socket server to send fake APRS messages to aprsd kiss, just for finishing up development.
2021-02-25 21:01:52 -05:00
# signalslot
thesmuggler==1.0.1
# via -r requirements.in
update-checker==0.18.0
# via -r requirements.in
urllib3==1.26.6
# via requests
Added the ability to use direwolf KISS socket This patch adds APRS KISS connectivity. I have tested this with a running Direwolf install via either a serial KISS connection or the optional new TCPKISS connection, both to Direwolf. This adds the new required aioax25 python library for the underlying KISS and AX25 support. NOTE: For the TCPKISS connection, this patch requires a pull request patch the aioax25 library to include a TCP Based KISS TNC client to enable the TCPKISS client So you will need to pull down this PR https://github.com/sjlongland/aioax25/pull/7 To enable this, Edit your aprsd.yml file and enable one of the 2 KISS connections. Only one is supported at a time. kiss: serial: enabled: True device: /dev/ttyS1 baudrate: 9600 or kiss: tcp: enabled: True host: "ip address/hostname of direwolf" port: "direwolf configured kiss port" This patch alters the Message object classes to be able to send messages out via the aprslib socket connection to the APRS-IS network on the internet, or via the direwolf KISS TCP socket, depending on the origination of the initial message coming in. If an APRS message comes in via APRS-IS, then replies will go out APRS-IS. IF an APRS message comes in via direwolf, then replies will go out via direwolf KISS TCP socket. Both can work at the same time. TODO: I need some real APRS message packets to verify that the new thread is processing packets correctly through the plugins and able to send the resulting messages back out to direwolf. Have a hard coded callsign for now in the kissclient consumer call, just so I can see messages coming in from direwolf. I dont' have an APRS capable radio at the moment to send messages directly to direwolf. Might need to write a simple python socket server to send fake APRS messages to aprsd kiss, just for finishing up development.
2021-02-25 21:01:52 -05:00
weakrefmethod==1.0.3
# via signalslot
2021-09-01 17:26:10 -04:00
werkzeug==2.0.0
# via flask