sm8350-common: update wifi configs
This commit is contained in:
Cosmin Tanislav
parent
69272b9f09
commit
1d0e2e3c57
@ -1,143 +1,125 @@
|
|||||||
# This file allows user to override the factory
|
# This file allows user to override the factory
|
||||||
# defaults for the WLAN Driver
|
# defaults for the WLAN Driver
|
||||||
|
|
||||||
# Enable IMPS or not
|
fw_timeout_crash=1
|
||||||
gEnableImps=1
|
|
||||||
|
|
||||||
# Enable BMPS or not
|
|
||||||
gEnableBmps=1
|
|
||||||
|
|
||||||
# Phy Mode (auto, b, g, n, etc)
|
|
||||||
# Valid values are 0-9, with 0 = Auto, 4 = 11n, 9 = 11ac
|
|
||||||
# 1 = 11abg, 2 = 11b, 3 = 11g, 5 = 11g only, 6 = 11n only
|
|
||||||
# 7 = 11b only 8 = 11ac only.
|
|
||||||
gDot11Mode=0
|
gDot11Mode=0
|
||||||
|
|
||||||
# Assigned MAC Addresses - This will be used until NV items are in place
|
|
||||||
# Each byte of MAC address is represented in Hex format as XX
|
|
||||||
Intf0MacAddress=000AF58989FF
|
|
||||||
Intf1MacAddress=000AF58989FE
|
|
||||||
Intf2MacAddress=000AF58989FD
|
|
||||||
Intf3MacAddress=000AF58989FC
|
|
||||||
|
|
||||||
# UAPSD service interval for VO,VI, BE, BK traffic
|
|
||||||
InfraUapsdVoSrvIntv=0
|
InfraUapsdVoSrvIntv=0
|
||||||
InfraUapsdViSrvIntv=0
|
InfraUapsdViSrvIntv=0
|
||||||
InfraUapsdBeSrvIntv=0
|
InfraUapsdBeSrvIntv=0
|
||||||
InfraUapsdBkSrvIntv=0
|
InfraUapsdBkSrvIntv=0
|
||||||
|
|
||||||
# Flag to allow STA send AddTspec even when ACM is Off
|
|
||||||
gAddTSWhenACMIsOff=1
|
gAddTSWhenACMIsOff=1
|
||||||
|
|
||||||
# Flags to filter Mcast and Bcast RX packets.
|
|
||||||
# Value 0: No filtering, 1: Filter all Multicast.
|
|
||||||
# 2: Filter all Broadcast. 3: Filter all Mcast abd Bcast
|
|
||||||
McastBcastFilter=3
|
|
||||||
|
|
||||||
#Flag to enable HostARPOffload feature or not
|
|
||||||
hostArpOffload=1
|
|
||||||
|
|
||||||
#Flag to enable HostNSOffload feature or not
|
|
||||||
hostNSOffload=1
|
|
||||||
|
|
||||||
# 802.11n Protection flag
|
|
||||||
gEnableApProt=1
|
|
||||||
|
|
||||||
#Enable OBSS protection
|
|
||||||
gEnableApOBSSProt=1
|
gEnableApOBSSProt=1
|
||||||
|
RTSThreshold=1048576
|
||||||
#Enable/Disable UAPSD for SoftAP
|
|
||||||
gEnableApUapsd=1
|
|
||||||
|
|
||||||
# Fixed Rate
|
|
||||||
gFixedRate=0
|
|
||||||
|
|
||||||
# Maximum Tx power
|
|
||||||
# gTxPowerCap=30
|
|
||||||
|
|
||||||
# Fragmentation Threshold
|
|
||||||
# gFragmentationThreshold=2346
|
|
||||||
|
|
||||||
# RTS threshold
|
|
||||||
RTSThreshold=2346
|
|
||||||
|
|
||||||
# Intra-BSS forward
|
|
||||||
gDisableIntraBssFwd=0
|
gDisableIntraBssFwd=0
|
||||||
|
|
||||||
# WMM Enable/Disable
|
|
||||||
WmmIsEnabled=0
|
|
||||||
|
|
||||||
# 802.11d support
|
|
||||||
g11dSupportEnabled=0
|
g11dSupportEnabled=0
|
||||||
|
|
||||||
# 802.11h support
|
|
||||||
g11hSupportEnabled=1
|
|
||||||
|
|
||||||
# DFS Master Capability
|
|
||||||
gEnableDFSMasterCap=1
|
gEnableDFSMasterCap=1
|
||||||
|
|
||||||
# ESE Support and fast transition
|
|
||||||
EseEnabled=0
|
|
||||||
|
|
||||||
ImplicitQosIsEnabled=0
|
|
||||||
|
|
||||||
gNeighborScanTimerPeriod=200
|
gNeighborScanTimerPeriod=200
|
||||||
gNeighborLookupThreshold=76
|
gNeighborLookupThreshold=76
|
||||||
gNeighborScanChannelMinTime=20
|
gNeighborScanChannelMinTime=20
|
||||||
gNeighborScanChannelMaxTime=30
|
|
||||||
gMaxNeighborReqTries=3
|
|
||||||
|
|
||||||
# Legacy (non-ESE, non-802.11r) Fast Roaming Support
|
|
||||||
# To enable, set FastRoamEnabled=1
|
|
||||||
# To disable, set FastRoamEnabled=0
|
|
||||||
FastRoamEnabled=1
|
FastRoamEnabled=1
|
||||||
|
|
||||||
# Check if the AP to which we are roaming is better than current AP in
|
|
||||||
# terms of RSSI. Checking is disabled if set to Zero.Otherwise it will
|
|
||||||
# use this value as to how better the RSSI of the new/roamable AP should
|
|
||||||
# be for roaming
|
|
||||||
RoamRssiDiff=5
|
RoamRssiDiff=5
|
||||||
|
|
||||||
# To enable, set gRoamIntraBand=1 (Roaming within band)
|
|
||||||
# To disable, set gRoamIntraBand=0 (Roaming across band)
|
|
||||||
gRoamIntraBand=0
|
gRoamIntraBand=0
|
||||||
|
|
||||||
#Short Guard Interval Enable/disable
|
|
||||||
gShortGI20Mhz=1
|
|
||||||
gShortGI40Mhz=1
|
|
||||||
|
|
||||||
#Auto Shutdown Value in seconds. A value of 0 means Auto shutoff is disabled
|
|
||||||
gAPAutoShutOff=0
|
|
||||||
|
|
||||||
#Auto Shutdown wlan : Value in Seconds. 0 means disabled. Max 1 day = 86400 sec
|
|
||||||
gWlanAutoShutdown = 0
|
|
||||||
|
|
||||||
# Not used.
|
|
||||||
gApAutoChannelSelection=0
|
|
||||||
|
|
||||||
#Preferred band (both or 2.4 only or 5 only)
|
|
||||||
BandCapability=0
|
|
||||||
|
|
||||||
#Channel Bonding
|
|
||||||
gChannelBondingMode5GHz=1
|
gChannelBondingMode5GHz=1
|
||||||
|
gEnableDFSChnlScan=1
|
||||||
|
gAllowDFSChannelRoam=1
|
||||||
|
gSetTxChainmask1x1=1
|
||||||
|
gSetRxChainmask1x1=1
|
||||||
|
gActiveMaxChannelTime=40
|
||||||
|
gWlanMccToSccSwitchMode = 3
|
||||||
|
gEnableTXSTBC=1
|
||||||
|
gEnableTxBFeeSAP=1
|
||||||
|
gEnableTxBFin20MHz=1
|
||||||
|
gEnableTxSUBeamformer=1
|
||||||
|
gRrmEnable=1
|
||||||
|
gEnablefwprint=0
|
||||||
|
gEnablefwlog=1
|
||||||
|
gVhtAmpduLenExponent=7
|
||||||
|
gVhtMpduLen=2
|
||||||
|
isP2pDeviceAddrAdministrated=0
|
||||||
|
gEnableVhtFor24GHzBand=1
|
||||||
|
gEnableLpassSupport=1
|
||||||
|
gCountryCodePriority=1
|
||||||
|
gEnableMuBformee=1
|
||||||
|
gEnableTDLSSupport=1
|
||||||
|
gEnableTDLSImplicitTrigger=1
|
||||||
|
gTDLSExternalControl=1
|
||||||
|
gEnableTDLSOffChannel=1
|
||||||
|
|
||||||
#Say gGoKeepAlivePeriod(5 seconds) and gGoLinkMonitorPeriod(10 seconds).
|
################ Datapath feature set Begin ################
|
||||||
#For every 10 seconds DUT send Qos Null frame(i.e., Keep Alive frame if link
|
gBusBandwidthHighThreshold=2000
|
||||||
#is idle for last 10 seconds.) For both active and power save clients.
|
gBusBandwidthMediumThreshold=500
|
||||||
|
gBusBandwidthLowThreshold=150
|
||||||
|
gBusBandwidthComputeInterval=100
|
||||||
|
gVhtRxMCS=2
|
||||||
|
gVhtTxMCS=2
|
||||||
|
gEnable2x2=1
|
||||||
|
gVhtRxMCS2x2=2
|
||||||
|
gVhtTxMCS2x2=2
|
||||||
|
gIPAConfig=0x7d
|
||||||
|
gIPADescSize=800
|
||||||
|
dp_tx_ring_size=3072
|
||||||
|
gReorderOffloadSupported=1
|
||||||
|
gCEClassifyEnable=1
|
||||||
|
rx_mode=20
|
||||||
|
gEnableFastPath=1
|
||||||
|
gEnableIpTcpUdpChecksumOffload=1
|
||||||
|
TSOEnable=1
|
||||||
|
GROEnable=1
|
||||||
|
ght_mpdu_density=4
|
||||||
|
gEnableFlowSteering=1
|
||||||
|
ce_service_max_yield_time=500
|
||||||
|
ce_service_max_rx_ind_flush=1
|
||||||
|
maxMSDUsPerRxInd=8
|
||||||
|
#gEnableNUDTracking=1
|
||||||
|
dp_rx_fisa_enable=1
|
||||||
|
dp_rx_flow_search_table_size=128
|
||||||
|
rpsRxQueueCpuMapList=f3
|
||||||
|
legacy_mode_csum_disable=1
|
||||||
|
|
||||||
#Power save clients: DUT set TIM bit from 10th second onwards and till client
|
################ Datapath feature set End ################
|
||||||
#honors TIM bit. If doesn't honor for 5 seconds then DUT remove client.
|
|
||||||
|
|
||||||
#Active clients: DUT send Qos Null frame for 10th seconds onwards if it is not
|
adaptive_dwell_mode_enabled=1
|
||||||
#success still we try on 11th second if not tries on 12th and so on till 15th
|
hostscan_adaptive_dwell_mode=1
|
||||||
#second. Hence before disconnection DUT will send 5 NULL frames. Hence in any
|
adapt_dwell_lpf_weight=80
|
||||||
#case DUT will detect client got removed in (10+5) seconds.
|
adapt_dwell_wifi_act_threshold=10
|
||||||
#i.e., (gGoKeepAlivePeriod + gGoLinkMonitorPeriod)..
|
enable_rtt_mac_randomization=1
|
||||||
|
gEnableSNRMonitoring=1
|
||||||
|
gWmiCreditCount=1
|
||||||
|
acs_with_more_param=1
|
||||||
|
AutoChannelSelectWeight=0x00fafafa
|
||||||
|
bcast_twt=1
|
||||||
|
gRuntimePM=2
|
||||||
|
gRuntimePMDelay=500
|
||||||
|
gEnablePacketLog=0
|
||||||
|
gfine_time_meas_cap=0x0030D
|
||||||
|
oem_6g_support_disable=0
|
||||||
|
cfr_disable=7
|
||||||
|
|
||||||
#gGoLinkMonitorPeriod/ gApLinkMonitorPeriod is period where link is idle and
|
active_max_channel_time_2g=80
|
||||||
#it is period where we send NULL frame.
|
gActiveMaxChannelTime=60
|
||||||
#gApLinkMonitorPeriod = 10
|
active_max_channel_time_6g=60
|
||||||
#gGoLinkMonitorPeriod = 10
|
gPassiveMaxChannelTime=110
|
||||||
|
passive_max_channel_time_6g=60
|
||||||
|
|
||||||
|
#####################################Xiaomi ADD: START
|
||||||
|
|
||||||
|
# WLM flags setting for ultralow level, bit9 for BMPS disabled
|
||||||
|
# bit 0: Avoid scan request from HLOS if setting
|
||||||
|
# bit 1: Skip DFS channel SCAN if setting
|
||||||
|
# bit 19/20: 1 to set PCIE in L1SS state(low power mode), 0 to set PCIE in L0 state(active mode)
|
||||||
|
wlm_latency_flags_ultralow=0x180003
|
||||||
|
|
||||||
|
#APF: Android Packet Filter
|
||||||
|
gActiveMcBcBpfMode=1
|
||||||
|
|
||||||
|
# Assoc failure timeout value
|
||||||
|
# Code default is 2000
|
||||||
|
assoc_failure_timeout=5000
|
||||||
|
|
||||||
|
# Enable NUD tracking feature
|
||||||
|
# 0 - disable(default),1 - trigger disconnect, 2 - trigger roaming,
|
||||||
|
# 3 - trigger roaming, but if roam fails, disconnection
|
||||||
|
gEnableNUDTracking=3
|
||||||
|
|
||||||
#gGoKeepAlivePeriod/gApKeepAlivePeriod is time to spend to check whether frame
|
#gGoKeepAlivePeriod/gApKeepAlivePeriod is time to spend to check whether frame
|
||||||
#are succeed to send or not. Hence total effective detection time is
|
#are succeed to send or not. Hence total effective detection time is
|
||||||
@ -145,377 +127,98 @@ gChannelBondingMode5GHz=1
|
|||||||
# (gApLinkMonitorPeriod + gApKeepAlivePeriod)
|
# (gApLinkMonitorPeriod + gApKeepAlivePeriod)
|
||||||
gGoKeepAlivePeriod = 20
|
gGoKeepAlivePeriod = 20
|
||||||
gApKeepAlivePeriod = 20
|
gApKeepAlivePeriod = 20
|
||||||
|
#Enable Keep alive with non-zero period value
|
||||||
|
gStaKeepAlivePeriod = 30
|
||||||
|
|
||||||
#If set will start with active scan after driver load, otherwise will start with
|
# Enable ETSI SRD channels by Xiaomi. Qualcom default value is disable
|
||||||
#passive scan to find out the domain
|
# * BIT 0:- Enable/Disable SRD channels for SAP.
|
||||||
gEnableBypass11d=1
|
# * BIT 1:- Enable/Disable SRD channels for P2P-GO.
|
||||||
|
# * BIT 2:- Enable/Disable SRD channels for NAN.
|
||||||
#If set to 0, will not scan DFS channels
|
# Code default value is 6.
|
||||||
gEnableDFSChnlScan=1
|
etsi13_srd_chan_in_master_mode=7
|
||||||
|
|
||||||
# Enable DFS channel roam
|
|
||||||
# 0: DISABLE, 1: ENABLED_NORMAL, 2: ENABLED_ACTIVE
|
|
||||||
gAllowDFSChannelRoam=1
|
|
||||||
|
|
||||||
gVhtChannelWidth=2
|
|
||||||
|
|
||||||
#Data Inactivity Timeout when in powersave (in ms)
|
|
||||||
gDataInactivityTimeout=200
|
|
||||||
|
|
||||||
# Set txchainmask and rxchainmask
|
|
||||||
# These parameters are used only if gEnable2x2 is 0
|
|
||||||
# Valid values are 1,2
|
|
||||||
# Set gSetTxChainmask1x1=1 or gSetRxChainmask1x1=1 to select chain0.
|
|
||||||
# Set gSetTxChainmask1x1=2 or gSetRxChainmask1x1=2 to select chain1.
|
|
||||||
gSetTxChainmask1x1=1
|
|
||||||
gSetRxChainmask1x1=1
|
|
||||||
|
|
||||||
# Scan Timing Parameters
|
|
||||||
# gPassiveMaxChannelTime=110
|
|
||||||
# gPassiveMinChannelTime=60
|
|
||||||
gActiveMaxChannelTime=40
|
|
||||||
gActiveMinChannelTime=20
|
|
||||||
|
|
||||||
#If set to 0, MCC is not allowed.
|
|
||||||
gEnableMCCMode=1
|
|
||||||
|
|
||||||
# MCC to SCC Switch mode:
|
|
||||||
# 0-Disable
|
|
||||||
# 1-Enable
|
|
||||||
# 2-Force SCC if same band, with SAP restart
|
|
||||||
# 3-Force SCC if same band, without SAP restart by sending (E)CSA
|
|
||||||
# 4-Force SCC if same band (or) use SAP mandatory channel for DBS,
|
|
||||||
# without SAP restart by sending (E)CSA
|
|
||||||
gWlanMccToSccSwitchMode = 3
|
|
||||||
|
|
||||||
# 1=enable STBC; 0=disable STBC
|
|
||||||
gEnableRXSTBC=1
|
|
||||||
|
|
||||||
# 1=enable tx STBC; 0=disable
|
|
||||||
gEnableTXSTBC=1
|
|
||||||
|
|
||||||
# 1=enable rx LDPC; 0=disable
|
|
||||||
gEnableRXLDPC=1
|
|
||||||
|
|
||||||
#Enable/Disable Tx beamforming
|
|
||||||
gTxBFEnable=1
|
|
||||||
|
|
||||||
#Enable/Disable Tx beamformee in SAP mode
|
|
||||||
gEnableTxBFeeSAP=1
|
|
||||||
|
|
||||||
# Enable Tx beamforming in VHT20MHz
|
|
||||||
# Valid values are 0,1. If commented out, the default value is 0.
|
|
||||||
# 0=disable, 1=enable
|
|
||||||
gEnableTxBFin20MHz=1
|
|
||||||
|
|
||||||
#Enable/Disable SU Tx beamformer support.
|
|
||||||
gEnableTxSUBeamformer=1
|
|
||||||
|
|
||||||
gEnableFastRoamInConcurrency=1
|
|
||||||
|
|
||||||
#Maxium Channel time in msec
|
|
||||||
gMaxMediumTime = 6000
|
|
||||||
|
|
||||||
# 802.11K support
|
|
||||||
gRrmEnable=1
|
|
||||||
|
|
||||||
#Enable Power Save offload
|
|
||||||
gEnablePowerSaveOffload=1
|
|
||||||
|
|
||||||
#Enable firmware uart print
|
|
||||||
gEnablefwprint=0
|
|
||||||
|
|
||||||
# Firmware log mode
|
|
||||||
# Valid values are 0,1,2
|
|
||||||
# 0=Disable, 1=WMI, 2=DIAG
|
|
||||||
gEnablefwlog=1
|
|
||||||
|
|
||||||
# Maximum Receive AMPDU size (VHT only. Valid values:
|
|
||||||
# 0->8k 1->16k 2->32k 3->64k 4->128k)
|
|
||||||
gVhtAmpduLenExponent=7
|
|
||||||
|
|
||||||
# Maximum MPDU length (VHT only. Valid values:
|
|
||||||
# 0->3895 octets, 1->7991 octets, 2->11454 octets)
|
|
||||||
gVhtMpduLen=2
|
|
||||||
|
|
||||||
# Maximum number of wow filters required
|
|
||||||
#gMaxWoWFilters=22
|
|
||||||
|
|
||||||
# WOW Enable/Disable.
|
|
||||||
# 0 - Disable both magic pattern match and pattern byte match.
|
|
||||||
# 1 - Enable magic pattern match on all interfaces.
|
|
||||||
# 2 - Enable pattern byte match on all interfaces.
|
|
||||||
# 3 - Enable both magic pattern and pattern byte match on all interfaces.
|
|
||||||
# Default value of gEnableWoW is 3.
|
|
||||||
# gEnableWoW=0
|
|
||||||
|
|
||||||
# Enable or Disable MCC Adaptive Scheduler at the FW
|
|
||||||
# 1=Enable (default), 0=Disable
|
|
||||||
gEnableMCCAdaptiveScheduler=1
|
|
||||||
|
|
||||||
#Enable or Disable p2p device address administered
|
|
||||||
isP2pDeviceAddrAdministrated=0
|
|
||||||
|
|
||||||
# Set Thermal Power limit
|
|
||||||
TxPower2g=10
|
|
||||||
TxPower5g=10
|
|
||||||
# Remove Overlap channel restriction
|
|
||||||
gEnableOverLapCh=0
|
|
||||||
|
|
||||||
#Enable VHT on 2.4Ghz
|
|
||||||
gEnableVhtFor24GHzBand=1
|
|
||||||
# Configure channel Bonding in 2.4GHz
|
|
||||||
gChannelBondingMode24GHz=0
|
|
||||||
|
|
||||||
#Maximum number of offload peers supported
|
|
||||||
# gMaxOffloadPeers=2
|
|
||||||
|
|
||||||
# controlling the following offload patterns
|
|
||||||
# through ini parameter. Default value is 1
|
|
||||||
# to disable set it to zero. ssdp = 0
|
|
||||||
# Setup multicast pattern for mDNS 224.0.0.251,
|
|
||||||
# SSDP 239.255.255.250 and LLMNR 224.0.0.252
|
|
||||||
ssdp=0
|
|
||||||
|
|
||||||
#Enable Memory Deep Sleep
|
|
||||||
gEnableMemDeepSleep=1
|
|
||||||
|
|
||||||
# Regulatory Setting; 0=STRICT; 1=CUSTOM
|
|
||||||
gRegulatoryChangeCountry=1
|
|
||||||
|
|
||||||
# RA filtering rate limit param, the current value would not
|
|
||||||
# help if the lifetime in RA is less than 3*60=3min. Then
|
|
||||||
# we need to change it, though it is uncommon.
|
|
||||||
# gRAFilterEnable=0
|
|
||||||
gRArateLimitInterval=600
|
|
||||||
|
|
||||||
# Maximum number of concurrent connections
|
|
||||||
gMaxConcurrentActiveSessions=3
|
|
||||||
|
|
||||||
# Disable/Enable GreenAP
|
|
||||||
# 0 to disable, 1 to enable, default: 1
|
|
||||||
gEnableGreenAp=0
|
|
||||||
|
|
||||||
# Radar PRI multiplier
|
|
||||||
gDFSradarMappingPriMultiplier=4
|
|
||||||
|
|
||||||
gPNOScanSupport=1
|
|
||||||
|
|
||||||
#Enable/Disable LPASS support
|
|
||||||
# 0 to disable, 1 to enable
|
|
||||||
gEnableLpassSupport=1
|
|
||||||
|
|
||||||
# Whether userspace country code setting shld have priority
|
|
||||||
gCountryCodePriority=1
|
|
||||||
|
|
||||||
# Enable(1)/Disable(0) SIFS burst
|
|
||||||
gEnableSifsBurst=1
|
|
||||||
|
|
||||||
# Enable or Disable Multi-user MIMO
|
|
||||||
# 1=Enable (default), 0=Disable
|
|
||||||
gEnableMuBformee=1
|
|
||||||
|
|
||||||
# Enable/Disable channel avoidance for SAP in SCC scenario
|
|
||||||
# 0 - disable
|
|
||||||
# 1 - enable
|
|
||||||
gSapSccChanAvoidance=0
|
|
||||||
|
|
||||||
# Inactivity time (in ms) to end TX Service Period while in IBSS power save mode
|
|
||||||
gIbssTxSpEndInactivityTime=10
|
|
||||||
|
|
||||||
# Enable support for TDLS
|
|
||||||
# 0 - disable
|
|
||||||
# 1 - enable
|
|
||||||
gEnableTDLSSupport=1
|
|
||||||
|
|
||||||
# Enable support for Implicit Trigger of TDLS. That is, wlan driver shall
|
|
||||||
# initiate TDLS Discovery towards a peer whenever setup criteria (throughput
|
|
||||||
# and RSSI) is met and then will initiate teardown when teardown criteria
|
|
||||||
# (idle packet count and RSSI) is met.
|
|
||||||
# 0 - disable
|
|
||||||
# 1 - enable
|
|
||||||
gEnableTDLSImplicitTrigger=1
|
|
||||||
|
|
||||||
# Enable TDLS External Control. That is, user space application has to
|
|
||||||
# first configure a peer MAC in wlan driver towards which TDLS is desired.
|
|
||||||
# Device will establish TDLS only towards those configured peers whenever
|
|
||||||
# TDLS criteria (throughput and RSSI threshold) is met and teardown TDLS
|
|
||||||
# when teardown criteria (idle packet count and RSSI) is met. However,
|
|
||||||
# device will accept TDLS connection if it is initiated from any other peer,
|
|
||||||
# even if that peer is not configured.
|
|
||||||
# 0 - disable
|
|
||||||
# 1 - enable
|
|
||||||
# For TDLS External Control, Implicit Trigger must also be enabled.
|
|
||||||
gTDLSExternalControl=1
|
|
||||||
|
|
||||||
# Enable support for TDLS off-channel operation
|
|
||||||
# 0 - disable
|
|
||||||
# 1 - enable
|
|
||||||
# TDLS off-channel operation will be invoked when there is only one
|
|
||||||
# TDLS connection.
|
|
||||||
gEnableTDLSOffChannel=1
|
|
||||||
|
|
||||||
# Enable or Disable Random MAC (Spoofing)
|
|
||||||
# 1=Enable (default), 0=Disable
|
|
||||||
gEnableMacAddrSpoof=1
|
|
||||||
|
|
||||||
################ Datapath feature set Begin ################
|
|
||||||
# Bus bandwidth threshold values in terms of number of packets
|
|
||||||
gBusBandwidthHighThreshold=2000
|
|
||||||
gBusBandwidthMediumThreshold=500
|
|
||||||
gBusBandwidthLowThreshold=150
|
|
||||||
|
|
||||||
# Bus bandwidth compute timeout value in ms
|
|
||||||
gBusBandwidthComputeInterval=100
|
|
||||||
|
|
||||||
# VHT Tx/Rx MCS values
|
|
||||||
# Valid values are 0,1,2. If commented out, the default value is 0.
|
|
||||||
# 0=MCS0-7, 1=MCS0-8, 2=MCS0-9
|
|
||||||
gVhtRxMCS=2
|
|
||||||
gVhtTxMCS=2
|
|
||||||
|
|
||||||
# VHT Tx/Rx MCS values for 2x2
|
|
||||||
# Valid values are 0,1,2. If commented out, the default value is 0.
|
|
||||||
# 0=MCS0-7, 1=MCS0-8, 2=MCS0-9
|
|
||||||
gEnable2x2=1
|
|
||||||
gVhtRxMCS2x2=2
|
|
||||||
gVhtTxMCS2x2=2
|
|
||||||
|
|
||||||
#IPA config is a bit mask and following are the configurations.
|
|
||||||
#bit0 IPA Enable
|
|
||||||
#bit1 IPA PRE Filter enable
|
|
||||||
#bit2 IPv6 enable
|
|
||||||
#bit3 IPA Resource Manager (RM) enable
|
|
||||||
#bit4 IPA Clock scaling enable
|
|
||||||
#bit5 IPA uC ENABLE
|
|
||||||
#bit6 IPA uC STA ENABLE
|
|
||||||
#bit8 IPA Real Time Debugging
|
|
||||||
gIPAConfig=0x7d
|
|
||||||
gIPADescSize=800
|
|
||||||
|
|
||||||
# Enable/Disable RX full reorder offload
|
|
||||||
gReorderOffloadSupported=1
|
|
||||||
|
|
||||||
# Enable CE classification
|
|
||||||
# 1 - enable(default) 0 - disable
|
|
||||||
gCEClassifyEnable=1
|
|
||||||
|
|
||||||
# Enable Rx handling options
|
|
||||||
# Rx_thread=1 RPS=2(default for ROME) NAPI=4(default for ihelium)
|
|
||||||
rx_mode=5
|
|
||||||
|
|
||||||
# Enable(Tx) fastpath for data traffic.
|
|
||||||
# 1 - enable(default) 0 - disable
|
|
||||||
gEnableFastPath=1
|
|
||||||
|
|
||||||
# This flag enables IP, TCP and UDP checksum offload
|
|
||||||
# 1 - enable(default) 0 - disable
|
|
||||||
gEnableIpTcpUdpChecksumOffload=1
|
|
||||||
|
|
||||||
# Enable TCP Segmentation Offload
|
|
||||||
# 1 - enable 0 - disable
|
|
||||||
TSOEnable=1
|
|
||||||
|
|
||||||
# Enable Generic Receive Offload
|
|
||||||
# 1 - enable(default) 0 - disable
|
|
||||||
GROEnable=1
|
|
||||||
|
|
||||||
# Enable HT MPDU Density
|
|
||||||
# 4 for 2 micro sec
|
|
||||||
ght_mpdu_density=4
|
|
||||||
|
|
||||||
# Enable flow steering to enable multiple CEs for Rx flows.
|
|
||||||
# Multiple Rx CEs<==>Multiple Rx IRQs<==>probably different CPUs.
|
|
||||||
# Parallel Rx paths.
|
|
||||||
# 1 - enable 0 - disable(default)
|
|
||||||
gEnableFlowSteering=1
|
|
||||||
|
|
||||||
# Time in microseconds after which a NAPI poll must yield
|
|
||||||
ce_service_max_yield_time=500
|
|
||||||
|
|
||||||
#Maximum number of HTT messages to be processed per NAPI poll
|
|
||||||
ce_service_max_rx_ind_flush=1
|
|
||||||
|
|
||||||
# Maximum number of MSDUs the firmware will pack in one HTT_T2H_MSG_TYPE_RX_IN_ORD_PADDR_IND
|
|
||||||
maxMSDUsPerRxInd=8
|
|
||||||
|
|
||||||
# Enable NUD tracking feature
|
|
||||||
# 1 - enable 0 - disable(default)
|
|
||||||
gEnableNUDTracking=1
|
|
||||||
|
|
||||||
# Enable PEER UNMAP CONF SUPPORT
|
|
||||||
# 1 - enable 0 - disable(default)
|
|
||||||
gEnablePeerUnmapConfSupport=1
|
|
||||||
|
|
||||||
################ Datapath feature set End ################
|
|
||||||
|
|
||||||
################ NAN feature set start ###################
|
|
||||||
|
|
||||||
# Enable NAN discovery (NAN 1.0)
|
|
||||||
# 1 - enable 0 - disable(default)
|
|
||||||
gEnableNanSupport=1
|
|
||||||
# Enable NAN Datapath
|
|
||||||
genable_nan_datapath=1
|
|
||||||
|
|
||||||
################ NAN feature set end #####################
|
|
||||||
|
|
||||||
adaptive_dwell_mode_enabled=1
|
|
||||||
|
|
||||||
hostscan_adaptive_dwell_mode=1
|
|
||||||
|
|
||||||
adapt_dwell_lpf_weight=80
|
|
||||||
|
|
||||||
adapt_dwell_wifi_act_threshold=10
|
|
||||||
|
|
||||||
MAWCEnabled=0
|
|
||||||
|
|
||||||
drop_bcn_on_chan_mismatch=0
|
|
||||||
# Enable/Disable rtt sta mac randomization
|
|
||||||
enable_rtt_mac_randomization=1
|
|
||||||
|
|
||||||
#Enable/Disable SNR monitoring
|
|
||||||
gEnableSNRMonitoring=1
|
|
||||||
|
|
||||||
|
#####Roaming
|
||||||
# Sets RSSI preference for 5GHz over 2.4GHz AP
|
# Sets RSSI preference for 5GHz over 2.4GHz AP
|
||||||
gSelect5GHzMargin=5
|
gSelect5GHzMargin=5
|
||||||
#RSSI threshold offset for 2G to 5G roam
|
|
||||||
roam_bad_rssi_thresh_offset_2g=0
|
# Candidate AP minimum RSSI for beacon miss roam trigger
|
||||||
#RSSI threshold for background roam
|
# Code default is -70
|
||||||
roam_bg_scan_bad_rssi_thresh=-76
|
candidate_min_rssi_for_beacon_miss=-83
|
||||||
#Sends NULL frame to AP periodically in seconds to notify STA's existence
|
|
||||||
gStaKeepAlivePeriod=30
|
# Dense traffic threshold in kBps
|
||||||
gEnablePacketLog=1
|
# Code default is 400
|
||||||
#Enable/Disable Modulated DTIM feature
|
|
||||||
gEnableModulatedDTIM=3
|
|
||||||
#Set MaxLIModulate Dtim
|
|
||||||
gMaxLIModulatedDTIM=3
|
|
||||||
#Sets dense roam RSSI Threshold diff
|
|
||||||
groam_dense_rssi_thresh_offset=5
|
|
||||||
#traffic Threshold required for dense roam scan
|
|
||||||
gtraffic_threshold=50
|
gtraffic_threshold=50
|
||||||
gRoamBmissFirstBcnt=10
|
|
||||||
gRoamBmissFinalBcnt=20
|
#Idle Monitor Roaming: START
|
||||||
#To Enable/Disable PER based Roaming in FW
|
# Code default is flase to disable idle roaming
|
||||||
gper_roam_enabled=3
|
enable_idle_roam=1
|
||||||
#ARP access category
|
idle_roam_min_rssi=-65
|
||||||
arp_ac_category=0
|
#Idle Monitor Roaming: END
|
||||||
#Enable/Disable LPRx
|
|
||||||
gEnableLPRx=0
|
#enable/disable FT open feature
|
||||||
gEnableSelfRecovery=1
|
# Code default is 1
|
||||||
#Enable/Disable FT open feature
|
|
||||||
enable_ftopen=0
|
enable_ftopen=0
|
||||||
|
|
||||||
|
# Stop auto-creating twt session
|
||||||
|
twt_congestion_timeout=0
|
||||||
|
|
||||||
|
#VTS SAR test fail as sar version is not match
|
||||||
|
gEnableSARV1toSARV2=1
|
||||||
|
|
||||||
|
# This ini is used to give higher priority for 5g scc than dbs.
|
||||||
|
# It is bitmap per enum policy_mgr_con_mode.
|
||||||
|
# For example in GO+STA(5G) mode, when TPUT is onfigured as wlan system
|
||||||
|
# preference option, If 5G SCC needs higher priority than dbs, set it as 8.
|
||||||
|
g_prefer_5g_scc_to_dbs=8
|
||||||
|
|
||||||
|
# set modulated DTIM interval
|
||||||
|
gEnableModulatedDTIM=3
|
||||||
|
gMaxLIModulatedDTIM=3
|
||||||
|
|
||||||
|
# Reduce the expiry time for avoid list and black list in drv.
|
||||||
|
avoid_list_expiry_time=3
|
||||||
|
black_list_expiry_time=5
|
||||||
|
# Improve threshold to move the Ap from avoid to blacklist
|
||||||
|
bad_bssid_counter_thresh=7
|
||||||
|
|
||||||
|
# Enable the sending of ICMP requests to the
|
||||||
|
# FW at an interval of 200 milliseconds
|
||||||
|
send_icmp_req_to_fw=200
|
||||||
|
|
||||||
|
# Enable SoftAP on indoor channel, but Xiaomi's patch in driver only
|
||||||
|
# allow this when STA was connected on the same indoor channel.
|
||||||
|
gindoor_channel_support=1
|
||||||
|
|
||||||
#Enable max link speed
|
#Enable max link speed
|
||||||
gReportMaxLinkSpeed=2
|
gReportMaxLinkSpeed=2
|
||||||
#Enable/Disable SAE support in Driver
|
|
||||||
sae_enabled=0
|
#####################################Xiaomi ADD: END
|
||||||
# Enable/disable ETSI SRD channels in master mode PCL and ACS functionality
|
|
||||||
etsi13_srd_chan_in_master_mode=1
|
|
||||||
# Set max time for active 2G channel scan
|
# MIUI:ADD:
|
||||||
active_max_channel_time_2g=0
|
# Add for optimize download performance in noisy env.
|
||||||
# Enable/Disable emergency roaming during deauth/disassoc
|
|
||||||
enable_disconnect_roam_offload=1
|
# used to specify AP OUIs. The station's EDCA should follow
|
||||||
# Enable/Disable RTT feature
|
# the APs' when connecting to those AP, even if the
|
||||||
gEnableRTTSupport=0
|
# gEnableEdcaParams is set.
|
||||||
|
# Huawei OUI:ac:85:3d
|
||||||
|
gActionOUIDisableAggressiveEDCA=ac853d 00 01
|
||||||
|
# Enable edca parameter
|
||||||
|
gEnableEdcaParams=1
|
||||||
|
gEdcaVoCwmin=2
|
||||||
|
gEdcaViCwmin=2
|
||||||
|
gEdcaBkCwmin=2
|
||||||
|
gEdcaBeCwmin=2
|
||||||
|
|
||||||
|
gEdcaVoCwmax=3
|
||||||
|
gEdcaViCwmax=3
|
||||||
|
gEdcaBkCwmax=3
|
||||||
|
gEdcaBeCwmax=3
|
||||||
|
|
||||||
|
gEdcaVoAifs=2
|
||||||
|
gEdcaViAifs=2
|
||||||
|
gEdcaBkAifs=2
|
||||||
|
gEdcaBeAifs=2
|
||||||
|
|
||||||
END
|
END
|
||||||
|
|
||||||
|
|||||||
@ -2,4 +2,5 @@ disable_scan_offload=1
|
|||||||
p2p_no_group_iface=1
|
p2p_no_group_iface=1
|
||||||
persistent_reconnect=1
|
persistent_reconnect=1
|
||||||
bss_max_count=400
|
bss_max_count=400
|
||||||
p2p_go_intent=14
|
p2p_go_he=1
|
||||||
|
p2p_6ghz_disable=1
|
||||||
|
|||||||
Loading…
Reference in New Issue
Block a user