lisa/android_kernel_xiaomi_sm8350
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
968808b895
android_kernel_xiaomi_sm8350/arch/x86_64/kernel/traps.c

1015 lines
25 KiB
C
Raw Normal View History

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 18:20:36 -04:00
/*
* linux/arch/x86-64/traps.c
*
* Copyright (C) 1991, 1992 Linus Torvalds
* Copyright (C) 2000, 2001, 2002 Andi Kleen, SuSE Labs
*
* Pentium III FXSR, SSE support
* Gareth Hughes <gareth@valinux.com>, May 2000
*
* $Id: traps.c,v 1.36 2002/03/24 11:09:10 ak Exp $
*/
/*
* 'Traps.c' handles hardware traps and faults after we have saved some
* state in 'entry.S'.
*/
#include <linux/config.h>
#include <linux/sched.h>
#include <linux/kernel.h>
#include <linux/string.h>
#include <linux/errno.h>
#include <linux/ptrace.h>
#include <linux/timer.h>
#include <linux/mm.h>
#include <linux/init.h>
#include <linux/delay.h>
#include <linux/spinlock.h>
#include <linux/interrupt.h>
#include <linux/module.h>
#include <linux/moduleparam.h>
[PATCH] x86_64 show_stack(): call touch_nmi_watchdog I had strange NMI watchdog timeouts running sysrq-T across 9600-baud serial. Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-04-16 18:24:54 -04:00
#include <linux/nmi.h>
[PATCH] kprobes: prevent possible race conditions x86_64 changes This patch contains the x86_64 architecture specific changes to prevent the possible race conditions. Signed-off-by: Prasanna S Panchamukhi <prasanna@in.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-06 18:19:28 -04:00
#include <linux/kprobes.h>
[PATCH] x86_64: x86_64 add crashdump trigger points o Start booting into the capture kernel after an Oops if system is in a unrecoverable state. System will boot into the capture kernel, if one is pre-loaded by the user, and capture the kernel core dump. o One of the following conditions should be true to trigger the booting of capture kernel. - panic_on_oops is set. - pid of current thread is 0 - pid of current thread is 1 - Oops happened inside interrupt context. Signed-off-by: Vivek Goyal <vgoyal@in.ibm.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-04-18 06:35:13 -04:00
#include <linux/kexec.h>
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 18:20:36 -04:00
#include <asm/system.h>
#include <asm/uaccess.h>
#include <asm/io.h>
#include <asm/atomic.h>
#include <asm/debugreg.h>
#include <asm/desc.h>
#include <asm/i387.h>
#include <asm/kdebug.h>
#include <asm/processor.h>
#include <asm/smp.h>
#include <asm/pgalloc.h>
#include <asm/pda.h>
#include <asm/proto.h>
#include <asm/nmi.h>
asmlinkage void divide_error(void);
asmlinkage void debug(void);
asmlinkage void nmi(void);
asmlinkage void int3(void);
asmlinkage void overflow(void);
asmlinkage void bounds(void);
asmlinkage void invalid_op(void);
asmlinkage void device_not_available(void);
asmlinkage void double_fault(void);
asmlinkage void coprocessor_segment_overrun(void);
asmlinkage void invalid_TSS(void);
asmlinkage void segment_not_present(void);
asmlinkage void stack_segment(void);
asmlinkage void general_protection(void);
asmlinkage void page_fault(void);
asmlinkage void coprocessor_error(void);
asmlinkage void simd_coprocessor_error(void);
asmlinkage void reserved(void);
asmlinkage void alignment_check(void);
asmlinkage void machine_check(void);
asmlinkage void spurious_interrupt_bug(void);
[PATCH] Notifier chain update: API changes The kernel's implementation of notifier chains is unsafe. There is no protection against entries being added to or removed from a chain while the chain is in use. The issues were discussed in this thread: http://marc.theaimsgroup.com/?l=linux-kernel&m=113018709002036&w=2 We noticed that notifier chains in the kernel fall into two basic usage classes: "Blocking" chains are always called from a process context and the callout routines are allowed to sleep; "Atomic" chains can be called from an atomic context and the callout routines are not allowed to sleep. We decided to codify this distinction and make it part of the API. Therefore this set of patches introduces three new, parallel APIs: one for blocking notifiers, one for atomic notifiers, and one for "raw" notifiers (which is really just the old API under a new name). New kinds of data structures are used for the heads of the chains, and new routines are defined for registration, unregistration, and calling a chain. The three APIs are explained in include/linux/notifier.h and their implementation is in kernel/sys.c. With atomic and blocking chains, the implementation guarantees that the chain links will not be corrupted and that chain callers will not get messed up by entries being added or removed. For raw chains the implementation provides no guarantees at all; users of this API must provide their own protections. (The idea was that situations may come up where the assumptions of the atomic and blocking APIs are not appropriate, so it should be possible for users to handle these things in their own way.) There are some limitations, which should not be too hard to live with. For atomic/blocking chains, registration and unregistration must always be done in a process context since the chain is protected by a mutex/rwsem. Also, a callout routine for a non-raw chain must not try to register or unregister entries on its own chain. (This did happen in a couple of places and the code had to be changed to avoid it.) Since atomic chains may be called from within an NMI handler, they cannot use spinlocks for synchronization. Instead we use RCU. The overhead falls almost entirely in the unregister routine, which is okay since unregistration is much less frequent that calling a chain. Here is the list of chains that we adjusted and their classifications. None of them use the raw API, so for the moment it is only a placeholder. ATOMIC CHAINS ------------- arch/i386/kernel/traps.c: i386die_chain arch/ia64/kernel/traps.c: ia64die_chain arch/powerpc/kernel/traps.c: powerpc_die_chain arch/sparc64/kernel/traps.c: sparc64die_chain arch/x86_64/kernel/traps.c: die_chain drivers/char/ipmi/ipmi_si_intf.c: xaction_notifier_list kernel/panic.c: panic_notifier_list kernel/profile.c: task_free_notifier net/bluetooth/hci_core.c: hci_notifier net/ipv4/netfilter/ip_conntrack_core.c: ip_conntrack_chain net/ipv4/netfilter/ip_conntrack_core.c: ip_conntrack_expect_chain net/ipv6/addrconf.c: inet6addr_chain net/netfilter/nf_conntrack_core.c: nf_conntrack_chain net/netfilter/nf_conntrack_core.c: nf_conntrack_expect_chain net/netlink/af_netlink.c: netlink_chain BLOCKING CHAINS --------------- arch/powerpc/platforms/pseries/reconfig.c: pSeries_reconfig_chain arch/s390/kernel/process.c: idle_chain arch/x86_64/kernel/process.c idle_notifier drivers/base/memory.c: memory_chain drivers/cpufreq/cpufreq.c cpufreq_policy_notifier_list drivers/cpufreq/cpufreq.c cpufreq_transition_notifier_list drivers/macintosh/adb.c: adb_client_list drivers/macintosh/via-pmu.c sleep_notifier_list drivers/macintosh/via-pmu68k.c sleep_notifier_list drivers/macintosh/windfarm_core.c wf_client_list drivers/usb/core/notify.c usb_notifier_list drivers/video/fbmem.c fb_notifier_list kernel/cpu.c cpu_chain kernel/module.c module_notify_list kernel/profile.c munmap_notifier kernel/profile.c task_exit_notifier kernel/sys.c reboot_notifier_list net/core/dev.c netdev_chain net/decnet/dn_dev.c: dnaddr_chain net/ipv4/devinet.c: inetaddr_chain It's possible that some of these classifications are wrong. If they are, please let us know or submit a patch to fix them. Note that any chain that gets called very frequently should be atomic, because the rwsem read-locking used for blocking chains is very likely to incur cache misses on SMP systems. (However, if the chain's callout routines may sleep then the chain cannot be atomic.) The patch set was written by Alan Stern and Chandra Seetharaman, incorporating material written by Keith Owens and suggestions from Paul McKenney and Andrew Morton. [jes@sgi.com: restructure the notifier chain initialization macros] Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Chandra Seetharaman <sekharan@us.ibm.com> Signed-off-by: Jes Sorensen <jes@sgi.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-27 04:16:30 -05:00
ATOMIC_NOTIFIER_HEAD(die_chain);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 18:20:36 -04:00
int register_die_notifier(struct notifier_block *nb)
{
[PATCH] x86_64: actively synchronize vmalloc area when registering certain callbacks While the modular aspect of the respective i386 patch doesn't apply to x86-64 (as the top level page directory entry is shared between modules and the base kernel), handlers registered with register_die_notifier() are still under similar constraints for touching ioremap()ed or vmalloc()ed memory. The likelihood of this problem becoming visible is of course significantly lower, as the assigned virtual addresses would have to cross a 2**39 byte boundary. This is because the callback gets invoked (a) in the page fault path before the top level page table propagation gets carried out (hence a fault to propagate the top level page table entry/entries mapping to module's code/data would nest infinitly) and (b) in the NMI path, where nested faults must absolutely not happen, since otherwise the IRET from the nested fault re-enables NMIs, potentially resulting in nested NMI occurences. Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-25 10:29:40 -05:00
vmalloc_sync_all();
[PATCH] Notifier chain update: API changes The kernel's implementation of notifier chains is unsafe. There is no protection against entries being added to or removed from a chain while the chain is in use. The issues were discussed in this thread: http://marc.theaimsgroup.com/?l=linux-kernel&m=113018709002036&w=2 We noticed that notifier chains in the kernel fall into two basic usage classes: "Blocking" chains are always called from a process context and the callout routines are allowed to sleep; "Atomic" chains can be called from an atomic context and the callout routines are not allowed to sleep. We decided to codify this distinction and make it part of the API. Therefore this set of patches introduces three new, parallel APIs: one for blocking notifiers, one for atomic notifiers, and one for "raw" notifiers (which is really just the old API under a new name). New kinds of data structures are used for the heads of the chains, and new routines are defined for registration, unregistration, and calling a chain. The three APIs are explained in include/linux/notifier.h and their implementation is in kernel/sys.c. With atomic and blocking chains, the implementation guarantees that the chain links will not be corrupted and that chain callers will not get messed up by entries being added or removed. For raw chains the implementation provides no guarantees at all; users of this API must provide their own protections. (The idea was that situations may come up where the assumptions of the atomic and blocking APIs are not appropriate, so it should be possible for users to handle these things in their own way.) There are some limitations, which should not be too hard to live with. For atomic/blocking chains, registration and unregistration must always be done in a process context since the chain is protected by a mutex/rwsem. Also, a callout routine for a non-raw chain must not try to register or unregister entries on its own chain. (This did happen in a couple of places and the code had to be changed to avoid it.) Since atomic chains may be called from within an NMI handler, they cannot use spinlocks for synchronization. Instead we use RCU. The overhead falls almost entirely in the unregister routine, which is okay since unregistration is much less frequent that calling a chain. Here is the list of chains that we adjusted and their classifications. None of them use the raw API, so for the moment it is only a placeholder. ATOMIC CHAINS ------------- arch/i386/kernel/traps.c: i386die_chain arch/ia64/kernel/traps.c: ia64die_chain arch/powerpc/kernel/traps.c: powerpc_die_chain arch/sparc64/kernel/traps.c: sparc64die_chain arch/x86_64/kernel/traps.c: die_chain drivers/char/ipmi/ipmi_si_intf.c: xaction_notifier_list kernel/panic.c: panic_notifier_list kernel/profile.c: task_free_notifier net/bluetooth/hci_core.c: hci_notifier net/ipv4/netfilter/ip_conntrack_core.c: ip_conntrack_chain net/ipv4/netfilter/ip_conntrack_core.c: ip_conntrack_expect_chain net/ipv6/addrconf.c: inet6addr_chain net/netfilter/nf_conntrack_core.c: nf_conntrack_chain net/netfilter/nf_conntrack_core.c: nf_conntrack_expect_chain net/netlink/af_netlink.c: netlink_chain BLOCKING CHAINS --------------- arch/powerpc/platforms/pseries/reconfig.c: pSeries_reconfig_chain arch/s390/kernel/process.c: idle_chain arch/x86_64/kernel/process.c idle_notifier drivers/base/memory.c: memory_chain drivers/cpufreq/cpufreq.c cpufreq_policy_notifier_list drivers/cpufreq/cpufreq.c cpufreq_transition_notifier_list drivers/macintosh/adb.c: adb_client_list drivers/macintosh/via-pmu.c sleep_notifier_list drivers/macintosh/via-pmu68k.c sleep_notifier_list drivers/macintosh/windfarm_core.c wf_client_list drivers/usb/core/notify.c usb_notifier_list drivers/video/fbmem.c fb_notifier_list kernel/cpu.c cpu_chain kernel/module.c module_notify_list kernel/profile.c munmap_notifier kernel/profile.c task_exit_notifier kernel/sys.c reboot_notifier_list net/core/dev.c netdev_chain net/decnet/dn_dev.c: dnaddr_chain net/ipv4/devinet.c: inetaddr_chain It's possible that some of these classifications are wrong. If they are, please let us know or submit a patch to fix them. Note that any chain that gets called very frequently should be atomic, because the rwsem read-locking used for blocking chains is very likely to incur cache misses on SMP systems. (However, if the chain's callout routines may sleep then the chain cannot be atomic.) The patch set was written by Alan Stern and Chandra Seetharaman, incorporating material written by Keith Owens and suggestions from Paul McKenney and Andrew Morton. [jes@sgi.com: restructure the notifier chain initialization macros] Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Chandra Seetharaman <sekharan@us.ibm.com> Signed-off-by: Jes Sorensen <jes@sgi.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-27 04:16:30 -05:00
return atomic_notifier_chain_register(&die_chain, nb);
}
EXPORT_SYMBOL(register_die_notifier);
int unregister_die_notifier(struct notifier_block *nb)
{
return atomic_notifier_chain_unregister(&die_chain, nb);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 18:20:36 -04:00
}
[PATCH] Notifier chain update: API changes The kernel's implementation of notifier chains is unsafe. There is no protection against entries being added to or removed from a chain while the chain is in use. The issues were discussed in this thread: http://marc.theaimsgroup.com/?l=linux-kernel&m=113018709002036&w=2 We noticed that notifier chains in the kernel fall into two basic usage classes: "Blocking" chains are always called from a process context and the callout routines are allowed to sleep; "Atomic" chains can be called from an atomic context and the callout routines are not allowed to sleep. We decided to codify this distinction and make it part of the API. Therefore this set of patches introduces three new, parallel APIs: one for blocking notifiers, one for atomic notifiers, and one for "raw" notifiers (which is really just the old API under a new name). New kinds of data structures are used for the heads of the chains, and new routines are defined for registration, unregistration, and calling a chain. The three APIs are explained in include/linux/notifier.h and their implementation is in kernel/sys.c. With atomic and blocking chains, the implementation guarantees that the chain links will not be corrupted and that chain callers will not get messed up by entries being added or removed. For raw chains the implementation provides no guarantees at all; users of this API must provide their own protections. (The idea was that situations may come up where the assumptions of the atomic and blocking APIs are not appropriate, so it should be possible for users to handle these things in their own way.) There are some limitations, which should not be too hard to live with. For atomic/blocking chains, registration and unregistration must always be done in a process context since the chain is protected by a mutex/rwsem. Also, a callout routine for a non-raw chain must not try to register or unregister entries on its own chain. (This did happen in a couple of places and the code had to be changed to avoid it.) Since atomic chains may be called from within an NMI handler, they cannot use spinlocks for synchronization. Instead we use RCU. The overhead falls almost entirely in the unregister routine, which is okay since unregistration is much less frequent that calling a chain. Here is the list of chains that we adjusted and their classifications. None of them use the raw API, so for the moment it is only a placeholder. ATOMIC CHAINS ------------- arch/i386/kernel/traps.c: i386die_chain arch/ia64/kernel/traps.c: ia64die_chain arch/powerpc/kernel/traps.c: powerpc_die_chain arch/sparc64/kernel/traps.c: sparc64die_chain arch/x86_64/kernel/traps.c: die_chain drivers/char/ipmi/ipmi_si_intf.c: xaction_notifier_list kernel/panic.c: panic_notifier_list kernel/profile.c: task_free_notifier net/bluetooth/hci_core.c: hci_notifier net/ipv4/netfilter/ip_conntrack_core.c: ip_conntrack_chain net/ipv4/netfilter/ip_conntrack_core.c: ip_conntrack_expect_chain net/ipv6/addrconf.c: inet6addr_chain net/netfilter/nf_conntrack_core.c: nf_conntrack_chain net/netfilter/nf_conntrack_core.c: nf_conntrack_expect_chain net/netlink/af_netlink.c: netlink_chain BLOCKING CHAINS --------------- arch/powerpc/platforms/pseries/reconfig.c: pSeries_reconfig_chain arch/s390/kernel/process.c: idle_chain arch/x86_64/kernel/process.c idle_notifier drivers/base/memory.c: memory_chain drivers/cpufreq/cpufreq.c cpufreq_policy_notifier_list drivers/cpufreq/cpufreq.c cpufreq_transition_notifier_list drivers/macintosh/adb.c: adb_client_list drivers/macintosh/via-pmu.c sleep_notifier_list drivers/macintosh/via-pmu68k.c sleep_notifier_list drivers/macintosh/windfarm_core.c wf_client_list drivers/usb/core/notify.c usb_notifier_list drivers/video/fbmem.c fb_notifier_list kernel/cpu.c cpu_chain kernel/module.c module_notify_list kernel/profile.c munmap_notifier kernel/profile.c task_exit_notifier kernel/sys.c reboot_notifier_list net/core/dev.c netdev_chain net/decnet/dn_dev.c: dnaddr_chain net/ipv4/devinet.c: inetaddr_chain It's possible that some of these classifications are wrong. If they are, please let us know or submit a patch to fix them. Note that any chain that gets called very frequently should be atomic, because the rwsem read-locking used for blocking chains is very likely to incur cache misses on SMP systems. (However, if the chain's callout routines may sleep then the chain cannot be atomic.) The patch set was written by Alan Stern and Chandra Seetharaman, incorporating material written by Keith Owens and suggestions from Paul McKenney and Andrew Morton. [jes@sgi.com: restructure the notifier chain initialization macros] Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Chandra Seetharaman <sekharan@us.ibm.com> Signed-off-by: Jes Sorensen <jes@sgi.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-27 04:16:30 -05:00
EXPORT_SYMBOL(unregister_die_notifier);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 18:20:36 -04:00
static inline void conditional_sti(struct pt_regs *regs)
{
if (regs->eflags & X86_EFLAGS_IF)
local_irq_enable();
}
[PATCH] arch/x86_64/kernel/traps.c PTRACE_SINGLESTEP oops We found a problem with x86_64 kernels with preemption enabled, where having multiple tasks doing ptrace singlesteps around the same time will cause the system to 'oops'. The problem seems that a task can get preempted out of the do_debug() processing while it is running on the DEBUG_STACK stack. If another task on that same cpu then enters do_debug() and uses the same per-cpu DEBUG_STACK stack, the previous preempted tasks's stack contents can be corrupted, and the system will oops when the preempted task is context switched back in again. The typical oops looks like the following: Unable to handle kernel paging request at ffffffffffffffae RIP: <ffffffff805452a1>{thread_return+34} PGD 103027 PUD 102429067 PMD 0 Oops: 0002 [1] PREEMPT SMP CPU 0 Modules linked in: Pid: 3786, comm: ssdd Not tainted 2.6.15.2 #1 RIP: 0010:[<ffffffff805452a1>] <ffffffff805452a1>{thread_return+34} RSP: 0018:ffffffff80824058 EFLAGS: 000136c2 RAX: ffff81017e12cea0 RBX: 0000000000000000 RCX: 00000000c0000100 RDX: 0000000000000000 RSI: ffff8100f7856e20 RDI: ffff81017e12cea0 RBP: 0000000000000046 R08: ffff8100f68a6000 R09: 0000000000000000 R10: 0000000000000000 R11: ffff81017e12cea0 R12: ffff81000c2d53e8 R13: ffff81017f5b3be8 R14: ffff81000c0036e0 R15: 000001056cbfc899 FS: 00002aaaaaad9b00(0000) GS:ffffffff80883800(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: ffffffffffffffae CR3: 00000000f6fcf000 CR4: 00000000000006e0 Process ssdd (pid: 3786, threadinfo ffff8100f68a6000, task ffff8100f7856e20) Stack: ffffffff808240d8 ffffffff8012a84a ffff8100055f6c00 0000000000000020 0000000000000001 ffff81000c0036e0 ffffffff808240b8 0000000000000000 0000000000000000 0000000000000000 Call Trace: <#DB> <ffffffff8012a84a>{try_to_wake_up+985} <ffffffff8012c0d3>{kick_process+87} <ffffffff8013b262>{signal_wake_up+48} <ffffffff8013b5ce>{specific_send_sig_info+179} <ffffffff80546abc>{_spin_unlock_irqrestore+27} <ffffffff8013b67c>{force_sig_info+159} <ffffffff801103a0>{do_debug+289} <ffffffff80110278>{sync_regs+103} <ffffffff8010ed9a>{paranoid_userspace+35} Unable to handle kernel paging request at 00007fffffb7d000 RIP: <ffffffff8010f2e4>{show_trace+465} PGD f6f25067 PUD f6fcc067 PMD f6957067 PTE 0 Oops: 0000 [2] PREEMPT SMP This patch disables preemptions for the task upon entry to do_debug(), before interrupts are reenabled, and then disables preemption before exiting do_debug(), after disabling interrupts. I've noticed that the task can be preempted either at the end of an interrupt, or on the call to force_sig_info() on the spin_unlock_irqrestore() processing. It might be better to attempt to code a fix in entry.S around the code that calls do_debug(). Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-02-12 17:34:58 -05:00
static inline void preempt_conditional_sti(struct pt_regs *regs)
{
preempt_disable();
if (regs->eflags & X86_EFLAGS_IF)
local_irq_enable();
}
static inline void preempt_conditional_cli(struct pt_regs *regs)
{
if (regs->eflags & X86_EFLAGS_IF)
local_irq_disable();
[PATCH] x86_64: Don't schedule on exception stack on preemptive kernels Extends an earlier patch from John Blackwood to more exception handlers that also run on the exception stacks. Expand the use of preempt_conditional_{sti,cli} to all cases where interrupts are to be re-enabled during exception handling while running on an IST stack. Based on original patch from Jan Beulich. Cc: John Blackwood <john.blackwood@ccur.com> Cc: jbeulich@novell.com Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-05-15 12:19:47 -04:00
/* Make sure to not schedule here because we could be running
on an exception stack. */
[PATCH] arch/x86_64/kernel/traps.c PTRACE_SINGLESTEP oops We found a problem with x86_64 kernels with preemption enabled, where having multiple tasks doing ptrace singlesteps around the same time will cause the system to 'oops'. The problem seems that a task can get preempted out of the do_debug() processing while it is running on the DEBUG_STACK stack. If another task on that same cpu then enters do_debug() and uses the same per-cpu DEBUG_STACK stack, the previous preempted tasks's stack contents can be corrupted, and the system will oops when the preempted task is context switched back in again. The typical oops looks like the following: Unable to handle kernel paging request at ffffffffffffffae RIP: <ffffffff805452a1>{thread_return+34} PGD 103027 PUD 102429067 PMD 0 Oops: 0002 [1] PREEMPT SMP CPU 0 Modules linked in: Pid: 3786, comm: ssdd Not tainted 2.6.15.2 #1 RIP: 0010:[<ffffffff805452a1>] <ffffffff805452a1>{thread_return+34} RSP: 0018:ffffffff80824058 EFLAGS: 000136c2 RAX: ffff81017e12cea0 RBX: 0000000000000000 RCX: 00000000c0000100 RDX: 0000000000000000 RSI: ffff8100f7856e20 RDI: ffff81017e12cea0 RBP: 0000000000000046 R08: ffff8100f68a6000 R09: 0000000000000000 R10: 0000000000000000 R11: ffff81017e12cea0 R12: ffff81000c2d53e8 R13: ffff81017f5b3be8 R14: ffff81000c0036e0 R15: 000001056cbfc899 FS: 00002aaaaaad9b00(0000) GS:ffffffff80883800(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: ffffffffffffffae CR3: 00000000f6fcf000 CR4: 00000000000006e0 Process ssdd (pid: 3786, threadinfo ffff8100f68a6000, task ffff8100f7856e20) Stack: ffffffff808240d8 ffffffff8012a84a ffff8100055f6c00 0000000000000020 0000000000000001 ffff81000c0036e0 ffffffff808240b8 0000000000000000 0000000000000000 0000000000000000 Call Trace: <#DB> <ffffffff8012a84a>{try_to_wake_up+985} <ffffffff8012c0d3>{kick_process+87} <ffffffff8013b262>{signal_wake_up+48} <ffffffff8013b5ce>{specific_send_sig_info+179} <ffffffff80546abc>{_spin_unlock_irqrestore+27} <ffffffff8013b67c>{force_sig_info+159} <ffffffff801103a0>{do_debug+289} <ffffffff80110278>{sync_regs+103} <ffffffff8010ed9a>{paranoid_userspace+35} Unable to handle kernel paging request at 00007fffffb7d000 RIP: <ffffffff8010f2e4>{show_trace+465} PGD f6f25067 PUD f6fcc067 PMD f6957067 PTE 0 Oops: 0000 [2] PREEMPT SMP This patch disables preemptions for the task upon entry to do_debug(), before interrupts are reenabled, and then disables preemption before exiting do_debug(), after disabling interrupts. I've noticed that the task can be preempted either at the end of an interrupt, or on the call to force_sig_info() on the spin_unlock_irqrestore() processing. It might be better to attempt to code a fix in entry.S around the code that calls do_debug(). Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-02-12 17:34:58 -05:00
preempt_enable_no_resched();
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 18:20:36 -04:00
static int kstack_depth_to_print = 10;
#ifdef CONFIG_KALLSYMS
#include <linux/kallsyms.h>
int printk_address(unsigned long address)
{
unsigned long offset = 0, symsize;
const char *symname;
char *modname;
char *delim = ":";
char namebuf[128];
symname = kallsyms_lookup(address, &symsize, &offset, &modname, namebuf);
if (!symname)
return printk("[<%016lx>]", address);
if (!modname)
modname = delim = "";
return printk("<%016lx>{%s%s%s%s%+ld}",
[PATCH] x86_64: Clean up white space in traps.c Attached is a small code style cleanup patch that resulted from my skimming through the arch/x86_64/kernel/traps.c code to figure out what went haywire. Signed-off-by: Roberto Nibali <ratz@drugphish.ch> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-25 10:29:55 -05:00
address, delim, modname, delim, symname, offset);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 18:20:36 -04:00
}
#else
int printk_address(unsigned long address)
{
return printk("[<%016lx>]", address);
}
#endif
[PATCH] x86_64: Rewrite exception stack backtracing Exceptions and hardware interrupts can, to a certain degree, nest, so when attempting to follow the sequence of stacks used in order to dump their contents this has to be accounted for. Also, IST stacks have their tops stored in the TSS, so there's no need to add the stack size to get to their ends. Minor changes from AK. Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-04-16 18:25:17 -04:00
static unsigned long *in_exception_stack(unsigned cpu, unsigned long stack,
unsigned *usedp, const char **idp)
{
[PATCH] x86_64: Move int 3 handler to debug stack and allow to increase it. This - switches the INT3 handler to run on an IST stack (to cope with breakpoints set by a kernel debugger on places where the kernel's %gs base hasn't been set up, yet); the IST stack used is shared with the INT1 handler's [AK: this also allows setting a kprobe on the interrupt/exception entry points] - allows nesting of INT1/INT3 handlers so that one can, with a kernel debugger, debug (at least) the user-mode portions of the INT1/INT3 handling; the nesting isn't actively enabled here since a kernel- debugger-free kernel doesn't need it Signed-Off-By: Jan Beulich <jbeulich@novell.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-11 16:43:00 -05:00
static char ids[][8] = {
[PATCH] x86_64: Rewrite exception stack backtracing Exceptions and hardware interrupts can, to a certain degree, nest, so when attempting to follow the sequence of stacks used in order to dump their contents this has to be accounted for. Also, IST stacks have their tops stored in the TSS, so there's no need to add the stack size to get to their ends. Minor changes from AK. Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-04-16 18:25:17 -04:00
[DEBUG_STACK - 1] = "#DB",
[NMI_STACK - 1] = "NMI",
[DOUBLEFAULT_STACK - 1] = "#DF",
[STACKFAULT_STACK - 1] = "#SS",
[MCE_STACK - 1] = "#MC",
[PATCH] x86_64: Move int 3 handler to debug stack and allow to increase it. This - switches the INT3 handler to run on an IST stack (to cope with breakpoints set by a kernel debugger on places where the kernel's %gs base hasn't been set up, yet); the IST stack used is shared with the INT1 handler's [AK: this also allows setting a kprobe on the interrupt/exception entry points] - allows nesting of INT1/INT3 handlers so that one can, with a kernel debugger, debug (at least) the user-mode portions of the INT1/INT3 handling; the nesting isn't actively enabled here since a kernel- debugger-free kernel doesn't need it Signed-Off-By: Jan Beulich <jbeulich@novell.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-11 16:43:00 -05:00
#if DEBUG_STKSZ > EXCEPTION_STKSZ
[N_EXCEPTION_STACKS ... N_EXCEPTION_STACKS + DEBUG_STKSZ / EXCEPTION_STKSZ - 2] = "#DB[?]"
#endif
[PATCH] x86_64: Rewrite exception stack backtracing Exceptions and hardware interrupts can, to a certain degree, nest, so when attempting to follow the sequence of stacks used in order to dump their contents this has to be accounted for. Also, IST stacks have their tops stored in the TSS, so there's no need to add the stack size to get to their ends. Minor changes from AK. Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-04-16 18:25:17 -04:00
};
unsigned k;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 18:20:36 -04:00
[PATCH] x86_64: Rewrite exception stack backtracing Exceptions and hardware interrupts can, to a certain degree, nest, so when attempting to follow the sequence of stacks used in order to dump their contents this has to be accounted for. Also, IST stacks have their tops stored in the TSS, so there's no need to add the stack size to get to their ends. Minor changes from AK. Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-04-16 18:25:17 -04:00
for (k = 0; k < N_EXCEPTION_STACKS; k++) {
unsigned long end;
[PATCH] x86_64: Move int 3 handler to debug stack and allow to increase it. This - switches the INT3 handler to run on an IST stack (to cope with breakpoints set by a kernel debugger on places where the kernel's %gs base hasn't been set up, yet); the IST stack used is shared with the INT1 handler's [AK: this also allows setting a kprobe on the interrupt/exception entry points] - allows nesting of INT1/INT3 handlers so that one can, with a kernel debugger, debug (at least) the user-mode portions of the INT1/INT3 handling; the nesting isn't actively enabled here since a kernel- debugger-free kernel doesn't need it Signed-Off-By: Jan Beulich <jbeulich@novell.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-11 16:43:00 -05:00
switch (k + 1) {
#if DEBUG_STKSZ > EXCEPTION_STKSZ
case DEBUG_STACK:
[PATCH] x86_64: Node local pda take 2 -- cpu_pda preparation Helper patch to change cpu_pda users to use macros to access cpu_pda instead of the cpu_pda[] array. Signed-off-by: Ravikiran Thirumalai <kiran@scalex86.org> Signed-off-by: Shai Fultheim <shai@scalex86.org> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-11 16:45:39 -05:00
end = cpu_pda(cpu)->debugstack + DEBUG_STKSZ;
[PATCH] x86_64: Move int 3 handler to debug stack and allow to increase it. This - switches the INT3 handler to run on an IST stack (to cope with breakpoints set by a kernel debugger on places where the kernel's %gs base hasn't been set up, yet); the IST stack used is shared with the INT1 handler's [AK: this also allows setting a kprobe on the interrupt/exception entry points] - allows nesting of INT1/INT3 handlers so that one can, with a kernel debugger, debug (at least) the user-mode portions of the INT1/INT3 handling; the nesting isn't actively enabled here since a kernel- debugger-free kernel doesn't need it Signed-Off-By: Jan Beulich <jbeulich@novell.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-11 16:43:00 -05:00
break;
#endif
default:
end = per_cpu(init_tss, cpu).ist[k];
break;
}
[PATCH] x86_64: Rewrite exception stack backtracing Exceptions and hardware interrupts can, to a certain degree, nest, so when attempting to follow the sequence of stacks used in order to dump their contents this has to be accounted for. Also, IST stacks have their tops stored in the TSS, so there's no need to add the stack size to get to their ends. Minor changes from AK. Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-04-16 18:25:17 -04:00
if (stack >= end)
continue;
if (stack >= end - EXCEPTION_STKSZ) {
if (*usedp & (1U << k))
break;
*usedp |= 1U << k;
*idp = ids[k];
return (unsigned long *)end;
}
[PATCH] x86_64: Move int 3 handler to debug stack and allow to increase it. This - switches the INT3 handler to run on an IST stack (to cope with breakpoints set by a kernel debugger on places where the kernel's %gs base hasn't been set up, yet); the IST stack used is shared with the INT1 handler's [AK: this also allows setting a kprobe on the interrupt/exception entry points] - allows nesting of INT1/INT3 handlers so that one can, with a kernel debugger, debug (at least) the user-mode portions of the INT1/INT3 handling; the nesting isn't actively enabled here since a kernel- debugger-free kernel doesn't need it Signed-Off-By: Jan Beulich <jbeulich@novell.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-11 16:43:00 -05:00
#if DEBUG_STKSZ > EXCEPTION_STKSZ
if (k == DEBUG_STACK - 1 && stack >= end - DEBUG_STKSZ) {
unsigned j = N_EXCEPTION_STACKS - 1;
do {
++j;
end -= EXCEPTION_STKSZ;
ids[j][4] = '1' + (j - N_EXCEPTION_STACKS);
} while (stack < end - EXCEPTION_STKSZ);
if (*usedp & (1U << j))
break;
*usedp |= 1U << j;
*idp = ids[j];
return (unsigned long *)end;
}
#endif
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 18:20:36 -04:00
}
return NULL;
[PATCH] x86_64: Rewrite exception stack backtracing Exceptions and hardware interrupts can, to a certain degree, nest, so when attempting to follow the sequence of stacks used in order to dump their contents this has to be accounted for. Also, IST stacks have their tops stored in the TSS, so there's no need to add the stack size to get to their ends. Minor changes from AK. Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-04-16 18:25:17 -04:00
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 18:20:36 -04:00
/*
* x86-64 can have upto three kernel stacks:
* process stack
* interrupt stack
[PATCH] x86_64: Rewrite exception stack backtracing Exceptions and hardware interrupts can, to a certain degree, nest, so when attempting to follow the sequence of stacks used in order to dump their contents this has to be accounted for. Also, IST stacks have their tops stored in the TSS, so there's no need to add the stack size to get to their ends. Minor changes from AK. Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-04-16 18:25:17 -04:00
* severe exception (double fault, nmi, stack fault, debug, mce) hardware stack
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 18:20:36 -04:00
*/
void show_trace(unsigned long *stack)
{
[PATCH] x86_64: Rewrite exception stack backtracing Exceptions and hardware interrupts can, to a certain degree, nest, so when attempting to follow the sequence of stacks used in order to dump their contents this has to be accounted for. Also, IST stacks have their tops stored in the TSS, so there's no need to add the stack size to get to their ends. Minor changes from AK. Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-04-16 18:25:17 -04:00
const unsigned cpu = safe_smp_processor_id();
[PATCH] x86_64: Node local pda take 2 -- cpu_pda preparation Helper patch to change cpu_pda users to use macros to access cpu_pda instead of the cpu_pda[] array. Signed-off-by: Ravikiran Thirumalai <kiran@scalex86.org> Signed-off-by: Shai Fultheim <shai@scalex86.org> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-11 16:45:39 -05:00
unsigned long *irqstack_end = (unsigned long *)cpu_pda(cpu)->irqstackptr;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 18:20:36 -04:00
int i;
[PATCH] x86_64: Rewrite exception stack backtracing Exceptions and hardware interrupts can, to a certain degree, nest, so when attempting to follow the sequence of stacks used in order to dump their contents this has to be accounted for. Also, IST stacks have their tops stored in the TSS, so there's no need to add the stack size to get to their ends. Minor changes from AK. Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-04-16 18:25:17 -04:00
unsigned used = 0;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 18:20:36 -04:00
printk("\nCall Trace:");
[PATCH] x86_64: Rewrite exception stack backtracing Exceptions and hardware interrupts can, to a certain degree, nest, so when attempting to follow the sequence of stacks used in order to dump their contents this has to be accounted for. Also, IST stacks have their tops stored in the TSS, so there's no need to add the stack size to get to their ends. Minor changes from AK. Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-04-16 18:25:17 -04:00
#define HANDLE_STACK(cond) \
do while (cond) { \
[PATCH] x86_64: Reduce screen space needed by stack trace Especially under Xen, where the console cannot be adjusted to more than 25 lines, it is fairly important that the information displayed during a panic is as compact as possible. Below adjustments work towards that. Signed-Off-By: Jan Beulich <jbeulich@novell.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-11 16:46:45 -05:00
unsigned long addr = *stack++; \
[PATCH] x86_64: Rewrite exception stack backtracing Exceptions and hardware interrupts can, to a certain degree, nest, so when attempting to follow the sequence of stacks used in order to dump their contents this has to be accounted for. Also, IST stacks have their tops stored in the TSS, so there's no need to add the stack size to get to their ends. Minor changes from AK. Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-04-16 18:25:17 -04:00
if (kernel_text_address(addr)) { \
[PATCH] x86_64: Reduce screen space needed by stack trace Especially under Xen, where the console cannot be adjusted to more than 25 lines, it is fairly important that the information displayed during a panic is as compact as possible. Below adjustments work towards that. Signed-Off-By: Jan Beulich <jbeulich@novell.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-11 16:46:45 -05:00
if (i > 50) { \
printk("\n "); \
i = 0; \
} \
else \
i += printk(" "); \
[PATCH] x86_64: Rewrite exception stack backtracing Exceptions and hardware interrupts can, to a certain degree, nest, so when attempting to follow the sequence of stacks used in order to dump their contents this has to be accounted for. Also, IST stacks have their tops stored in the TSS, so there's no need to add the stack size to get to their ends. Minor changes from AK. Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-04-16 18:25:17 -04:00
/* \
* If the address is either in the text segment of the \
* kernel, or in the region which contains vmalloc'ed \
* memory, it *may* be the address of a calling \
* routine; if so, print it so that someone tracing \
* down the cause of the crash will be able to figure \
* out the call path that was taken. \
*/ \
i += printk_address(addr); \
} \
} while (0)
[PATCH] x86_64: Reduce screen space needed by stack trace Especially under Xen, where the console cannot be adjusted to more than 25 lines, it is fairly important that the information displayed during a panic is as compact as possible. Below adjustments work towards that. Signed-Off-By: Jan Beulich <jbeulich@novell.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-11 16:46:45 -05:00
for(i = 11; ; ) {
[PATCH] x86_64: Rewrite exception stack backtracing Exceptions and hardware interrupts can, to a certain degree, nest, so when attempting to follow the sequence of stacks used in order to dump their contents this has to be accounted for. Also, IST stacks have their tops stored in the TSS, so there's no need to add the stack size to get to their ends. Minor changes from AK. Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-04-16 18:25:17 -04:00
const char *id;
unsigned long *estack_end;
estack_end = in_exception_stack(cpu, (unsigned long)stack,
&used, &id);
if (estack_end) {
[PATCH] x86_64: Reduce screen space needed by stack trace Especially under Xen, where the console cannot be adjusted to more than 25 lines, it is fairly important that the information displayed during a panic is as compact as possible. Below adjustments work towards that. Signed-Off-By: Jan Beulich <jbeulich@novell.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-11 16:46:45 -05:00
i += printk(" <%s>", id);
[PATCH] x86_64: Rewrite exception stack backtracing Exceptions and hardware interrupts can, to a certain degree, nest, so when attempting to follow the sequence of stacks used in order to dump their contents this has to be accounted for. Also, IST stacks have their tops stored in the TSS, so there's no need to add the stack size to get to their ends. Minor changes from AK. Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-04-16 18:25:17 -04:00
HANDLE_STACK (stack < estack_end);
[PATCH] x86_64: Reduce screen space needed by stack trace Especially under Xen, where the console cannot be adjusted to more than 25 lines, it is fairly important that the information displayed during a panic is as compact as possible. Below adjustments work towards that. Signed-Off-By: Jan Beulich <jbeulich@novell.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-11 16:46:45 -05:00
i += printk(" <EOE>");
[PATCH] x86_64: Rewrite exception stack backtracing Exceptions and hardware interrupts can, to a certain degree, nest, so when attempting to follow the sequence of stacks used in order to dump their contents this has to be accounted for. Also, IST stacks have their tops stored in the TSS, so there's no need to add the stack size to get to their ends. Minor changes from AK. Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-04-16 18:25:17 -04:00
stack = (unsigned long *) estack_end[-2];
continue;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 18:20:36 -04:00
}
[PATCH] x86_64: Rewrite exception stack backtracing Exceptions and hardware interrupts can, to a certain degree, nest, so when attempting to follow the sequence of stacks used in order to dump their contents this has to be accounted for. Also, IST stacks have their tops stored in the TSS, so there's no need to add the stack size to get to their ends. Minor changes from AK. Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-04-16 18:25:17 -04:00
if (irqstack_end) {
unsigned long *irqstack;
irqstack = irqstack_end -
(IRQSTACKSIZE - 64) / sizeof(*irqstack);
if (stack >= irqstack && stack < irqstack_end) {
[PATCH] x86_64: Reduce screen space needed by stack trace Especially under Xen, where the console cannot be adjusted to more than 25 lines, it is fairly important that the information displayed during a panic is as compact as possible. Below adjustments work towards that. Signed-Off-By: Jan Beulich <jbeulich@novell.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-11 16:46:45 -05:00
i += printk(" <IRQ>");
[PATCH] x86_64: Rewrite exception stack backtracing Exceptions and hardware interrupts can, to a certain degree, nest, so when attempting to follow the sequence of stacks used in order to dump their contents this has to be accounted for. Also, IST stacks have their tops stored in the TSS, so there's no need to add the stack size to get to their ends. Minor changes from AK. Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-04-16 18:25:17 -04:00
HANDLE_STACK (stack < irqstack_end);
stack = (unsigned long *) (irqstack_end[-1]);
irqstack_end = NULL;
[PATCH] x86_64: Reduce screen space needed by stack trace Especially under Xen, where the console cannot be adjusted to more than 25 lines, it is fairly important that the information displayed during a panic is as compact as possible. Below adjustments work towards that. Signed-Off-By: Jan Beulich <jbeulich@novell.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-11 16:46:45 -05:00
i += printk(" <EOI>");
[PATCH] x86_64: Rewrite exception stack backtracing Exceptions and hardware interrupts can, to a certain degree, nest, so when attempting to follow the sequence of stacks used in order to dump their contents this has to be accounted for. Also, IST stacks have their tops stored in the TSS, so there's no need to add the stack size to get to their ends. Minor changes from AK. Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-04-16 18:25:17 -04:00
continue;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 18:20:36 -04:00
}
}
[PATCH] x86_64: Rewrite exception stack backtracing Exceptions and hardware interrupts can, to a certain degree, nest, so when attempting to follow the sequence of stacks used in order to dump their contents this has to be accounted for. Also, IST stacks have their tops stored in the TSS, so there's no need to add the stack size to get to their ends. Minor changes from AK. Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-04-16 18:25:17 -04:00
break;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 18:20:36 -04:00
}
[PATCH] x86_64: Rewrite exception stack backtracing Exceptions and hardware interrupts can, to a certain degree, nest, so when attempting to follow the sequence of stacks used in order to dump their contents this has to be accounted for. Also, IST stacks have their tops stored in the TSS, so there's no need to add the stack size to get to their ends. Minor changes from AK. Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-04-16 18:25:17 -04:00
HANDLE_STACK (((long) stack & (THREAD_SIZE-1)) != 0);
#undef HANDLE_STACK
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 18:20:36 -04:00
printk("\n");
}
void show_stack(struct task_struct *tsk, unsigned long * rsp)
{
unsigned long *stack;
int i;
const int cpu = safe_smp_processor_id();
[PATCH] x86_64: Node local pda take 2 -- cpu_pda preparation Helper patch to change cpu_pda users to use macros to access cpu_pda instead of the cpu_pda[] array. Signed-off-by: Ravikiran Thirumalai <kiran@scalex86.org> Signed-off-by: Shai Fultheim <shai@scalex86.org> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-11 16:45:39 -05:00
unsigned long *irqstack_end = (unsigned long *) (cpu_pda(cpu)->irqstackptr);
unsigned long *irqstack = (unsigned long *) (cpu_pda(cpu)->irqstackptr - IRQSTACKSIZE);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 18:20:36 -04:00
// debugging aid: "show_stack(NULL, NULL);" prints the
// back trace for this cpu.
if (rsp == NULL) {
if (tsk)
rsp = (unsigned long *)tsk->thread.rsp;
else
rsp = (unsigned long *)&rsp;
}
stack = rsp;
for(i=0; i < kstack_depth_to_print; i++) {
if (stack >= irqstack && stack <= irqstack_end) {
if (stack == irqstack_end) {
stack = (unsigned long *) (irqstack_end[-1]);
printk(" <EOI> ");
}
} else {
if (((long) stack & (THREAD_SIZE-1)) == 0)
break;
}
if (i && ((i % 4) == 0))
printk("\n ");
printk("%016lx ", *stack++);
[PATCH] x86_64 show_stack(): call touch_nmi_watchdog I had strange NMI watchdog timeouts running sysrq-T across 9600-baud serial. Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-04-16 18:24:54 -04:00
touch_nmi_watchdog();
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 18:20:36 -04:00
}
show_trace((unsigned long *)rsp);
}
/*
* The architecture-independent dump_stack generator
*/
void dump_stack(void)
{
unsigned long dummy;
show_trace(&dummy);
}
EXPORT_SYMBOL(dump_stack);
void show_registers(struct pt_regs *regs)
{
int i;
[PATCH] xen: x86_64: use more usermode macro Make use of the user_mode macro where it's possible. This is useful for Xen because it will need only to redefine only the macro to a hypervisor call. Signed-off-by: Vincent Hanquez <vincent.hanquez@cl.cam.ac.uk> Cc: Ian Pratt <m+Ian.Pratt@cl.cam.ac.uk> Cc: Andi Kleen <ak@muc.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-23 03:08:46 -04:00
int in_kernel = !user_mode(regs);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 18:20:36 -04:00
unsigned long rsp;
const int cpu = safe_smp_processor_id();
[PATCH] x86_64: Node local pda take 2 -- cpu_pda preparation Helper patch to change cpu_pda users to use macros to access cpu_pda instead of the cpu_pda[] array. Signed-off-by: Ravikiran Thirumalai <kiran@scalex86.org> Signed-off-by: Shai Fultheim <shai@scalex86.org> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-11 16:45:39 -05:00
struct task_struct *cur = cpu_pda(cpu)->pcurrent;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 18:20:36 -04:00
rsp = regs->rsp;
printk("CPU %d ", cpu);
__show_regs(regs);
printk("Process %s (pid: %d, threadinfo %p, task %p)\n",
[PATCH] amd64: task_thread_info() Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-12 04:05:38 -05:00
cur->comm, cur->pid, task_thread_info(cur), cur);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 18:20:36 -04:00
/*
* When in-kernel, we also print out the stack and code at the
* time of the fault..
*/
if (in_kernel) {
printk("Stack: ");
show_stack(NULL, (unsigned long*)rsp);
printk("\nCode: ");
[PATCH] x86_64: Clean up white space in traps.c Attached is a small code style cleanup patch that resulted from my skimming through the arch/x86_64/kernel/traps.c code to figure out what went haywire. Signed-off-by: Roberto Nibali <ratz@drugphish.ch> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-25 10:29:55 -05:00
if (regs->rip < PAGE_OFFSET)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 18:20:36 -04:00
goto bad;
[PATCH] x86_64: Clean up white space in traps.c Attached is a small code style cleanup patch that resulted from my skimming through the arch/x86_64/kernel/traps.c code to figure out what went haywire. Signed-off-by: Roberto Nibali <ratz@drugphish.ch> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-25 10:29:55 -05:00
for (i=0; i<20; i++) {
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 18:20:36 -04:00
unsigned char c;
[PATCH] x86_64: Clean up white space in traps.c Attached is a small code style cleanup patch that resulted from my skimming through the arch/x86_64/kernel/traps.c code to figure out what went haywire. Signed-off-by: Roberto Nibali <ratz@drugphish.ch> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-25 10:29:55 -05:00
if (__get_user(c, &((unsigned char*)regs->rip)[i])) {
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 18:20:36 -04:00
bad:
printk(" Bad RIP value.");
break;
}
printk("%02x ", c);
}
}
printk("\n");
}
void handle_BUG(struct pt_regs *regs)
{
struct bug_frame f;
[PATCH] x86_64: Display meaningful part of filename during BUG() When building in a separate objtree, file names produced by BUG() & Co. can get fairly long; printing only the first 50 characters may thus result in (almost) no useful information. The following change makes it so that rather the last 50 characters of the filename get printed. Signed-Off-By: Jan Beulich <jbeulich@novell.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-11 16:46:48 -05:00
long len;
const char *prefix = "";
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 18:20:36 -04:00
[PATCH] xen: x86_64: use more usermode macro Make use of the user_mode macro where it's possible. This is useful for Xen because it will need only to redefine only the macro to a hypervisor call. Signed-off-by: Vincent Hanquez <vincent.hanquez@cl.cam.ac.uk> Cc: Ian Pratt <m+Ian.Pratt@cl.cam.ac.uk> Cc: Andi Kleen <ak@muc.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-23 03:08:46 -04:00
if (user_mode(regs))
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 18:20:36 -04:00
return;
[PATCH] x86_64: sparse warning cleanups Fix some trivial sparse warnings in x86_64 code. Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-11 16:46:30 -05:00
if (__copy_from_user(&f, (const void __user *) regs->rip,
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 18:20:36 -04:00
sizeof(struct bug_frame)))
return;
[PATCH] x86-64: reduce x86-64 bug frame by 4 bytes As mentioned before, the size of the bug frame can be further reduced while continuing to use instructions to encode the information. Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-12 12:49:25 -04:00
if (f.filename >= 0 ||
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 18:20:36 -04:00
f.ud2[0] != 0x0f || f.ud2[1] != 0x0b)
return;
[PATCH] x86_64: Display meaningful part of filename during BUG() When building in a separate objtree, file names produced by BUG() & Co. can get fairly long; printing only the first 50 characters may thus result in (almost) no useful information. The following change makes it so that rather the last 50 characters of the filename get printed. Signed-Off-By: Jan Beulich <jbeulich@novell.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-11 16:46:48 -05:00
len = __strnlen_user((char *)(long)f.filename, PATH_MAX) - 1;
if (len < 0 || len >= PATH_MAX)
[PATCH] x86-64: reduce x86-64 bug frame by 4 bytes As mentioned before, the size of the bug frame can be further reduced while continuing to use instructions to encode the information. Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-12 12:49:25 -04:00
f.filename = (int)(long)"unmapped filename";
[PATCH] x86_64: Display meaningful part of filename during BUG() When building in a separate objtree, file names produced by BUG() & Co. can get fairly long; printing only the first 50 characters may thus result in (almost) no useful information. The following change makes it so that rather the last 50 characters of the filename get printed. Signed-Off-By: Jan Beulich <jbeulich@novell.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-11 16:46:48 -05:00
else if (len > 50) {
f.filename += len - 50;
prefix = "...";
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 18:20:36 -04:00
printk("----------- [cut here ] --------- [please bite here ] ---------\n");
[PATCH] x86_64: Display meaningful part of filename during BUG() When building in a separate objtree, file names produced by BUG() & Co. can get fairly long; printing only the first 50 characters may thus result in (almost) no useful information. The following change makes it so that rather the last 50 characters of the filename get printed. Signed-Off-By: Jan Beulich <jbeulich@novell.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-11 16:46:48 -05:00
printk(KERN_ALERT "Kernel BUG at %s%.50s:%d\n", prefix, (char *)(long)f.filename, f.line);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 18:20:36 -04:00
}
[PATCH] x86_64: CONFIG_BUG=n fixes Fixes some !CONFIG_BUG warnings: include/asm/mmu_context.h: I funktion `switch_mm': include/asm/mmu_context.h:57: varning: implicit declaration of function `out_of_line_bug' Signed-off-by: Alexander Nyberg <alexn@telia.com> Cc: Andi Kleen <ak@muc.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-05-25 15:31:28 -04:00
#ifdef CONFIG_BUG
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 18:20:36 -04:00
void out_of_line_bug(void)
{
BUG();
}
[PATCH] x86_64: CONFIG_BUG=n fixes Fixes some !CONFIG_BUG warnings: include/asm/mmu_context.h: I funktion `switch_mm': include/asm/mmu_context.h:57: varning: implicit declaration of function `out_of_line_bug' Signed-off-by: Alexander Nyberg <alexn@telia.com> Cc: Andi Kleen <ak@muc.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-05-25 15:31:28 -04:00
#endif
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 18:20:36 -04:00
static DEFINE_SPINLOCK(die_lock);
static int die_owner = -1;
[PATCH] x86_64: fix die_lock nesting I noticed this when poking around in this area. The oops_begin() function in x86_64 would only conditionally claim the die_lock if the call is nested, but oops_end() would always release the spinlock. This patch adds a nest count for the die lock so that the release of the lock is only done on the final oops_end(). Signed-off-by: Corey Minyard <minyard@acm.org> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-05-08 09:17:22 -04:00
static unsigned int die_nest_count;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 18:20:36 -04:00
[PATCH] x86_64: Disallow kprobes on NMI handlers A kprobe executes IRET early and that could cause NMI recursion and stack corruption. Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-02-03 15:50:41 -05:00
unsigned __kprobes long oops_begin(void)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 18:20:36 -04:00
{
[PATCH] x86-64: Safe interrupts in oops_begin/end Rather than blindly re-enabling interrupts in oops_end(), save their state in oope_begin() and then restore that state. Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-12 12:49:24 -04:00
int cpu = safe_smp_processor_id();
unsigned long flags;
/* racy, but better than risking deadlock. */
local_irq_save(flags);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 18:20:36 -04:00
if (!spin_trylock(&die_lock)) {
if (cpu == die_owner)
/* nested oops. should stop eventually */;
else
[PATCH] x86-64: Safe interrupts in oops_begin/end Rather than blindly re-enabling interrupts in oops_end(), save their state in oope_begin() and then restore that state. Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-12 12:49:24 -04:00
spin_lock(&die_lock);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 18:20:36 -04:00
}
[PATCH] x86_64: fix die_lock nesting I noticed this when poking around in this area. The oops_begin() function in x86_64 would only conditionally claim the die_lock if the call is nested, but oops_end() would always release the spinlock. This patch adds a nest count for the die lock so that the release of the lock is only done on the final oops_end(). Signed-off-by: Corey Minyard <minyard@acm.org> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-05-08 09:17:22 -04:00
die_nest_count++;
[PATCH] x86-64: Safe interrupts in oops_begin/end Rather than blindly re-enabling interrupts in oops_end(), save their state in oope_begin() and then restore that state. Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-12 12:49:24 -04:00
die_owner = cpu;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 18:20:36 -04:00
console_verbose();
[PATCH] x86-64: Safe interrupts in oops_begin/end Rather than blindly re-enabling interrupts in oops_end(), save their state in oope_begin() and then restore that state. Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-12 12:49:24 -04:00
bust_spinlocks(1);
return flags;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 18:20:36 -04:00
}
[PATCH] x86_64: Disallow kprobes on NMI handlers A kprobe executes IRET early and that could cause NMI recursion and stack corruption. Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-02-03 15:50:41 -05:00
void __kprobes oops_end(unsigned long flags)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 18:20:36 -04:00
{
die_owner = -1;
[PATCH] x86-64: Safe interrupts in oops_begin/end Rather than blindly re-enabling interrupts in oops_end(), save their state in oope_begin() and then restore that state. Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-12 12:49:24 -04:00
bust_spinlocks(0);
[PATCH] x86_64: fix die_lock nesting I noticed this when poking around in this area. The oops_begin() function in x86_64 would only conditionally claim the die_lock if the call is nested, but oops_end() would always release the spinlock. This patch adds a nest count for the die lock so that the release of the lock is only done on the final oops_end(). Signed-off-by: Corey Minyard <minyard@acm.org> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-05-08 09:17:22 -04:00
die_nest_count--;
if (die_nest_count)
/* We still own the lock */
local_irq_restore(flags);
else
/* Nest count reaches zero, release the lock. */
spin_unlock_irqrestore(&die_lock, flags);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 18:20:36 -04:00
if (panic_on_oops)
[PATCH] x86-64: Safe interrupts in oops_begin/end Rather than blindly re-enabling interrupts in oops_end(), save their state in oope_begin() and then restore that state. Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-12 12:49:24 -04:00
panic("Oops");
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 18:20:36 -04:00
[PATCH] x86_64: Disallow kprobes on NMI handlers A kprobe executes IRET early and that could cause NMI recursion and stack corruption. Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-02-03 15:50:41 -05:00
void __kprobes __die(const char * str, struct pt_regs * regs, long err)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 18:20:36 -04:00
{
static int die_counter;
printk(KERN_EMERG "%s: %04lx [%u] ", str, err & 0xffff,++die_counter);
#ifdef CONFIG_PREEMPT
printk("PREEMPT ");
#endif
#ifdef CONFIG_SMP
printk("SMP ");
#endif
#ifdef CONFIG_DEBUG_PAGEALLOC
printk("DEBUG_PAGEALLOC");
#endif
printk("\n");
[PATCH] x86_64: make trap information available to die notification handlers This adjusts things so that handlers of the die() notifier will have sufficient information about the trap currently being handled. It also adjusts the notify_die() prototype to (again) match that of i386. Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-11 16:42:14 -05:00
notify_die(DIE_OOPS, str, regs, err, current->thread.trap_no, SIGSEGV);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 18:20:36 -04:00
show_registers(regs);
/* Executive summary in case the oops scrolled away */
printk(KERN_ALERT "RIP ");
printk_address(regs->rip);
printk(" RSP <%016lx>\n", regs->rsp);
[PATCH] x86_64: x86_64 add crashdump trigger points o Start booting into the capture kernel after an Oops if system is in a unrecoverable state. System will boot into the capture kernel, if one is pre-loaded by the user, and capture the kernel core dump. o One of the following conditions should be true to trigger the booting of capture kernel. - panic_on_oops is set. - pid of current thread is 0 - pid of current thread is 1 - Oops happened inside interrupt context. Signed-off-by: Vivek Goyal <vgoyal@in.ibm.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-04-18 06:35:13 -04:00
if (kexec_should_crash(current))
crash_kexec(regs);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 18:20:36 -04:00
}
void die(const char * str, struct pt_regs * regs, long err)
{
[PATCH] x86-64: Safe interrupts in oops_begin/end Rather than blindly re-enabling interrupts in oops_end(), save their state in oope_begin() and then restore that state. Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-12 12:49:24 -04:00
unsigned long flags = oops_begin();
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 18:20:36 -04:00
handle_BUG(regs);
__die(str, regs, err);
[PATCH] x86-64: Safe interrupts in oops_begin/end Rather than blindly re-enabling interrupts in oops_end(), save their state in oope_begin() and then restore that state. Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-12 12:49:24 -04:00
oops_end(flags);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 18:20:36 -04:00
do_exit(SIGSEGV);
}
[PATCH] x86_64: Disallow kprobes on NMI handlers A kprobe executes IRET early and that could cause NMI recursion and stack corruption. Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-02-03 15:50:41 -05:00
void __kprobes die_nmi(char *str, struct pt_regs *regs)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 18:20:36 -04:00
{
[PATCH] x86-64: Safe interrupts in oops_begin/end Rather than blindly re-enabling interrupts in oops_end(), save their state in oope_begin() and then restore that state. Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-12 12:49:24 -04:00
unsigned long flags = oops_begin();
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 18:20:36 -04:00
/*
* We are in trouble anyway, lets at least try
* to get a message out.
*/
printk(str, safe_smp_processor_id());
show_registers(regs);
[PATCH] x86_64: x86_64 add crashdump trigger points o Start booting into the capture kernel after an Oops if system is in a unrecoverable state. System will boot into the capture kernel, if one is pre-loaded by the user, and capture the kernel core dump. o One of the following conditions should be true to trigger the booting of capture kernel. - panic_on_oops is set. - pid of current thread is 0 - pid of current thread is 1 - Oops happened inside interrupt context. Signed-off-by: Vivek Goyal <vgoyal@in.ibm.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-04-18 06:35:13 -04:00
if (kexec_should_crash(current))
crash_kexec(regs);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 18:20:36 -04:00
if (panic_on_timeout || panic_on_oops)
panic("nmi watchdog");
printk("console shuts up ...\n");
[PATCH] x86-64: Safe interrupts in oops_begin/end Rather than blindly re-enabling interrupts in oops_end(), save their state in oope_begin() and then restore that state. Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-12 12:49:24 -04:00
oops_end(flags);
[PATCH] x86_64: add nmi_exit to die_nmi Playing with NMI watchdog on x86_64, I discovered that it didn't do what I expected. It always panic-ed, even when it didn't happen from interrupt context. This patch solves that problem for me. Also, in this case, do_exit() will be called with interrupts disabled, I believe. Would it be wise to also call local_irq_enable() after nmi_exit()? [Yes I added it -AK] Currently, on x86_64, any NMI watchdog timeout will cause a panic because the irq count will always be set to be in an interrupt when do_exit() is called from die_nmi(). If we add nmi_exit() to the die_nmi() call (since the nmi will never exit "normally") it seems to solve this problem. The following small program can be used to trigger the NMI watchdog to reproduce this: main () { iopl(3); for (;;) asm("cli"); } Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-05-08 09:17:25 -04:00
nmi_exit();
local_irq_enable();
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 18:20:36 -04:00
do_exit(SIGSEGV);
}
[PATCH] kprobes: prevent possible race conditions x86_64 changes This patch contains the x86_64 architecture specific changes to prevent the possible race conditions. Signed-off-by: Prasanna S Panchamukhi <prasanna@in.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-06 18:19:28 -04:00
static void __kprobes do_trap(int trapnr, int signr, char *str,
struct pt_regs * regs, long error_code,
siginfo_t *info)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 18:20:36 -04:00
{
[PATCH] x86_64: make trap information available to die notification handlers This adjusts things so that handlers of the die() notifier will have sufficient information about the trap currently being handled. It also adjusts the notify_die() prototype to (again) match that of i386. Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-11 16:42:14 -05:00
struct task_struct *tsk = current;
tsk->thread.error_code = error_code;
tsk->thread.trap_no = trapnr;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 18:20:36 -04:00
[PATCH] x86_64: make trap information available to die notification handlers This adjusts things so that handlers of the die() notifier will have sufficient information about the trap currently being handled. It also adjusts the notify_die() prototype to (again) match that of i386. Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-11 16:42:14 -05:00
if (user_mode(regs)) {
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 18:20:36 -04:00
if (exception_trace && unhandled_signal(tsk, signr))
printk(KERN_INFO
"%s[%d] trap %s rip:%lx rsp:%lx error:%lx\n",
tsk->comm, tsk->pid, str,
[PATCH] x86_64: Clean up white space in traps.c Attached is a small code style cleanup patch that resulted from my skimming through the arch/x86_64/kernel/traps.c code to figure out what went haywire. Signed-off-by: Roberto Nibali <ratz@drugphish.ch> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-25 10:29:55 -05:00
regs->rip, regs->rsp, error_code);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 18:20:36 -04:00
if (info)
force_sig_info(signr, info, tsk);
else
force_sig(signr, tsk);
return;
}
/* kernel trap */
{
const struct exception_table_entry *fixup;
fixup = search_exception_tables(regs->rip);
[PATCH] x86_64: Clean up white space in traps.c Attached is a small code style cleanup patch that resulted from my skimming through the arch/x86_64/kernel/traps.c code to figure out what went haywire. Signed-off-by: Roberto Nibali <ratz@drugphish.ch> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-25 10:29:55 -05:00
if (fixup)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 18:20:36 -04:00
regs->rip = fixup->fixup;
[PATCH] x86_64: Clean up white space in traps.c Attached is a small code style cleanup patch that resulted from my skimming through the arch/x86_64/kernel/traps.c code to figure out what went haywire. Signed-off-by: Roberto Nibali <ratz@drugphish.ch> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-25 10:29:55 -05:00
else
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 18:20:36 -04:00
die(str, regs, error_code);
return;
}
}
#define DO_ERROR(trapnr, signr, str, name) \
asmlinkage void do_##name(struct pt_regs * regs, long error_code) \
{ \
if (notify_die(DIE_TRAP, str, regs, error_code, trapnr, signr) \
== NOTIFY_STOP) \
return; \
[PATCH] x86_64: Don't schedule on exception stack on preemptive kernels Extends an earlier patch from John Blackwood to more exception handlers that also run on the exception stacks. Expand the use of preempt_conditional_{sti,cli} to all cases where interrupts are to be re-enabled during exception handling while running on an IST stack. Based on original patch from Jan Beulich. Cc: John Blackwood <john.blackwood@ccur.com> Cc: jbeulich@novell.com Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-05-15 12:19:47 -04:00
conditional_sti(regs); \
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 18:20:36 -04:00
do_trap(trapnr, signr, str, regs, error_code, NULL); \
}
#define DO_ERROR_INFO(trapnr, signr, str, name, sicode, siaddr) \
asmlinkage void do_##name(struct pt_regs * regs, long error_code) \
{ \
siginfo_t info; \
info.si_signo = signr; \
info.si_errno = 0; \
info.si_code = sicode; \
info.si_addr = (void __user *)siaddr; \
if (notify_die(DIE_TRAP, str, regs, error_code, trapnr, signr) \
== NOTIFY_STOP) \
return; \
[PATCH] x86_64: Don't schedule on exception stack on preemptive kernels Extends an earlier patch from John Blackwood to more exception handlers that also run on the exception stacks. Expand the use of preempt_conditional_{sti,cli} to all cases where interrupts are to be re-enabled during exception handling while running on an IST stack. Based on original patch from Jan Beulich. Cc: John Blackwood <john.blackwood@ccur.com> Cc: jbeulich@novell.com Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-05-15 12:19:47 -04:00
conditional_sti(regs); \
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 18:20:36 -04:00
do_trap(trapnr, signr, str, regs, error_code, &info); \
}
DO_ERROR_INFO( 0, SIGFPE, "divide error", divide_error, FPE_INTDIV, regs->rip)
DO_ERROR( 4, SIGSEGV, "overflow", overflow)
DO_ERROR( 5, SIGSEGV, "bounds", bounds)
[PATCH] x86_64: "invalid operand" -> "invalid opcode" The manual says Int 6 is "invalid opcode", not "invalid operand". Signed-off-by: Chuck Ebbert <76306.1226@compuserve.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-11 16:46:00 -05:00
DO_ERROR_INFO( 6, SIGILL, "invalid opcode", invalid_op, ILL_ILLOPN, regs->rip)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 18:20:36 -04:00
DO_ERROR( 7, SIGSEGV, "device not available", device_not_available)
DO_ERROR( 9, SIGFPE, "coprocessor segment overrun", coprocessor_segment_overrun)
DO_ERROR(10, SIGSEGV, "invalid TSS", invalid_TSS)
DO_ERROR(11, SIGBUS, "segment not present", segment_not_present)
DO_ERROR_INFO(17, SIGBUS, "alignment check", alignment_check, BUS_ADRALN, 0)
DO_ERROR(18, SIGSEGV, "reserved", reserved)
[PATCH] x86_64: Don't schedule on exception stack on preemptive kernels Extends an earlier patch from John Blackwood to more exception handlers that also run on the exception stacks. Expand the use of preempt_conditional_{sti,cli} to all cases where interrupts are to be re-enabled during exception handling while running on an IST stack. Based on original patch from Jan Beulich. Cc: John Blackwood <john.blackwood@ccur.com> Cc: jbeulich@novell.com Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-05-15 12:19:47 -04:00
/* Runs on IST stack */
asmlinkage void do_stack_segment(struct pt_regs *regs, long error_code)
{
if (notify_die(DIE_TRAP, "stack segment", regs, error_code,
12, SIGBUS) == NOTIFY_STOP)
return;
preempt_conditional_sti(regs);
do_trap(12, SIGBUS, "stack segment", regs, error_code, NULL);
preempt_conditional_cli(regs);
}
[PATCH] x86_64: Clean up double fault handling Since a double fault always implies that kernel data structures are corrupt, this fault should neither be handed to user mode handling, nor should the handler allow resuming the faulting code stream (since architecturally this isn't a fault, but an abort). Note that this slightly depends on the previously submitted patch adjusting the prototype of notify_die() (a compiler warning will result without that other patch). AK: Removed obsolete CONFIG_CHECKING code, added comments Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-11 16:42:17 -05:00
asmlinkage void do_double_fault(struct pt_regs * regs, long error_code)
{
static const char str[] = "double fault";
struct task_struct *tsk = current;
/* Return not checked because double check cannot be ignored */
notify_die(DIE_TRAP, str, regs, error_code, 8, SIGSEGV);
tsk->thread.error_code = error_code;
tsk->thread.trap_no = 8;
/* This is always a kernel trap and never fixable (and thus must
never return). */
for (;;)
die(str, regs, error_code);
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 18:20:36 -04:00
[PATCH] kprobes: prevent possible race conditions x86_64 changes This patch contains the x86_64 architecture specific changes to prevent the possible race conditions. Signed-off-by: Prasanna S Panchamukhi <prasanna@in.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-06 18:19:28 -04:00
asmlinkage void __kprobes do_general_protection(struct pt_regs * regs,
long error_code)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 18:20:36 -04:00
{
[PATCH] x86_64: make trap information available to die notification handlers This adjusts things so that handlers of the die() notifier will have sufficient information about the trap currently being handled. It also adjusts the notify_die() prototype to (again) match that of i386. Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-11 16:42:14 -05:00
struct task_struct *tsk = current;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 18:20:36 -04:00
conditional_sti(regs);
[PATCH] x86_64: make trap information available to die notification handlers This adjusts things so that handlers of the die() notifier will have sufficient information about the trap currently being handled. It also adjusts the notify_die() prototype to (again) match that of i386. Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-11 16:42:14 -05:00
tsk->thread.error_code = error_code;
tsk->thread.trap_no = 13;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 18:20:36 -04:00
[PATCH] x86_64: make trap information available to die notification handlers This adjusts things so that handlers of the die() notifier will have sufficient information about the trap currently being handled. It also adjusts the notify_die() prototype to (again) match that of i386. Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-11 16:42:14 -05:00
if (user_mode(regs)) {
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 18:20:36 -04:00
if (exception_trace && unhandled_signal(tsk, SIGSEGV))
printk(KERN_INFO
"%s[%d] general protection rip:%lx rsp:%lx error:%lx\n",
tsk->comm, tsk->pid,
[PATCH] x86_64: Clean up white space in traps.c Attached is a small code style cleanup patch that resulted from my skimming through the arch/x86_64/kernel/traps.c code to figure out what went haywire. Signed-off-by: Roberto Nibali <ratz@drugphish.ch> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-25 10:29:55 -05:00
regs->rip, regs->rsp, error_code);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 18:20:36 -04:00
force_sig(SIGSEGV, tsk);
return;
}
/* kernel gp */
{
const struct exception_table_entry *fixup;
fixup = search_exception_tables(regs->rip);
if (fixup) {
regs->rip = fixup->fixup;
return;
}
if (notify_die(DIE_GPF, "general protection fault", regs,
error_code, 13, SIGSEGV) == NOTIFY_STOP)
return;
die("general protection fault", regs, error_code);
}
}
[PATCH] x86_64: Disallow kprobes on NMI handlers A kprobe executes IRET early and that could cause NMI recursion and stack corruption. Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-02-03 15:50:41 -05:00
static __kprobes void
mem_parity_error(unsigned char reason, struct pt_regs * regs)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 18:20:36 -04:00
{
printk("Uhhuh. NMI received. Dazed and confused, but trying to continue\n");
printk("You probably have a hardware problem with your RAM chips\n");
/* Clear and disable the memory parity error line. */
reason = (reason & 0xf) | 4;
outb(reason, 0x61);
}
[PATCH] x86_64: Disallow kprobes on NMI handlers A kprobe executes IRET early and that could cause NMI recursion and stack corruption. Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-02-03 15:50:41 -05:00
static __kprobes void
io_check_error(unsigned char reason, struct pt_regs * regs)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 18:20:36 -04:00
{
printk("NMI: IOCK error (debug interrupt?)\n");
show_registers(regs);
/* Re-enable the IOCK line, wait for a few seconds */
reason = (reason & 0xf) | 8;
outb(reason, 0x61);
mdelay(2000);
reason &= ~8;
outb(reason, 0x61);
}
[PATCH] x86_64: Disallow kprobes on NMI handlers A kprobe executes IRET early and that could cause NMI recursion and stack corruption. Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-02-03 15:50:41 -05:00
static __kprobes void
unknown_nmi_error(unsigned char reason, struct pt_regs * regs)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 18:20:36 -04:00
{ printk("Uhhuh. NMI received for unknown reason %02x.\n", reason);
printk("Dazed and confused, but trying to continue\n");
printk("Do you have a strange power saving mode enabled?\n");
}
[PATCH] x86_64: Regularize exception stack handling This fixes various issues in the return path for "paranoid" handlers (= running on a private exception stack that act like NMIs). Generalize previous hack to switch back to process stack for scheduling/signal handling purposes. Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-04-16 18:25:03 -04:00
/* Runs on IST stack. This code must keep interrupts off all the time.
Nested NMIs are prevented by the CPU. */
[PATCH] x86_64: Disallow kprobes on NMI handlers A kprobe executes IRET early and that could cause NMI recursion and stack corruption. Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-02-03 15:50:41 -05:00
asmlinkage __kprobes void default_do_nmi(struct pt_regs *regs)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 18:20:36 -04:00
{
unsigned char reason = 0;
[PATCH] x86_64: CPU hotplug support Experimental CPU hotplug patch for x86_64 ----------------------------------------- This supports logical CPU online and offline. - Test with maxcpus=1, and then kick other cpu's off to test if init code is all cleaned up. CONFIG_SCHED_SMT works as well. - idle threads are forked on demand from keventd threads for clean startup TBD: 1. Not tested on a real NUMA machine (tested with numa=fake=2) 2. Handle ACPI pieces for physical hotplug support. Signed-off-by: Ashok Raj <ashok.raj@intel.com> Acked-by: Andi Kleen <ak@muc.de> Acked-by: Zwane Mwaikambo <zwane@arm.linux.org.uk> Signed-off-by: Shaohua.li<shaohua.li@intel.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-25 17:55:00 -04:00
int cpu;
cpu = smp_processor_id();
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 18:20:36 -04:00
/* Only the BSP gets external NMIs from the system. */
[PATCH] x86_64: CPU hotplug support Experimental CPU hotplug patch for x86_64 ----------------------------------------- This supports logical CPU online and offline. - Test with maxcpus=1, and then kick other cpu's off to test if init code is all cleaned up. CONFIG_SCHED_SMT works as well. - idle threads are forked on demand from keventd threads for clean startup TBD: 1. Not tested on a real NUMA machine (tested with numa=fake=2) 2. Handle ACPI pieces for physical hotplug support. Signed-off-by: Ashok Raj <ashok.raj@intel.com> Acked-by: Andi Kleen <ak@muc.de> Acked-by: Zwane Mwaikambo <zwane@arm.linux.org.uk> Signed-off-by: Shaohua.li<shaohua.li@intel.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-25 17:55:00 -04:00
if (!cpu)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 18:20:36 -04:00
reason = get_nmi_reason();
if (!(reason & 0xc0)) {
[PATCH] x86_64: make trap information available to die notification handlers This adjusts things so that handlers of the die() notifier will have sufficient information about the trap currently being handled. It also adjusts the notify_die() prototype to (again) match that of i386. Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-11 16:42:14 -05:00
if (notify_die(DIE_NMI_IPI, "nmi_ipi", regs, reason, 2, SIGINT)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 18:20:36 -04:00
== NOTIFY_STOP)
return;
#ifdef CONFIG_X86_LOCAL_APIC
/*
* Ok, so this is none of the documented NMI sources,
* so it must be the NMI watchdog.
*/
if (nmi_watchdog > 0) {
nmi_watchdog_tick(regs,reason);
return;
}
#endif
unknown_nmi_error(reason, regs);
return;
}
[PATCH] x86_64: make trap information available to die notification handlers This adjusts things so that handlers of the die() notifier will have sufficient information about the trap currently being handled. It also adjusts the notify_die() prototype to (again) match that of i386. Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-11 16:42:14 -05:00
if (notify_die(DIE_NMI, "nmi", regs, reason, 2, SIGINT) == NOTIFY_STOP)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 18:20:36 -04:00
return;
/* AK: following checks seem to be broken on modern chipsets. FIXME */
if (reason & 0x80)
mem_parity_error(reason, regs);
if (reason & 0x40)
io_check_error(reason, regs);
}
[PATCH] x86_64: Move int 3 handler to debug stack and allow to increase it. This - switches the INT3 handler to run on an IST stack (to cope with breakpoints set by a kernel debugger on places where the kernel's %gs base hasn't been set up, yet); the IST stack used is shared with the INT1 handler's [AK: this also allows setting a kprobe on the interrupt/exception entry points] - allows nesting of INT1/INT3 handlers so that one can, with a kernel debugger, debug (at least) the user-mode portions of the INT1/INT3 handling; the nesting isn't actively enabled here since a kernel- debugger-free kernel doesn't need it Signed-Off-By: Jan Beulich <jbeulich@novell.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-11 16:43:00 -05:00
/* runs on IST stack. */
[PATCH] kprobes: prevent possible race conditions x86_64 changes This patch contains the x86_64 architecture specific changes to prevent the possible race conditions. Signed-off-by: Prasanna S Panchamukhi <prasanna@in.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-06 18:19:28 -04:00
asmlinkage void __kprobes do_int3(struct pt_regs * regs, long error_code)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 18:20:36 -04:00
{
if (notify_die(DIE_INT3, "int3", regs, error_code, 3, SIGTRAP) == NOTIFY_STOP) {
return;
}
[PATCH] x86_64: Don't schedule on exception stack on preemptive kernels Extends an earlier patch from John Blackwood to more exception handlers that also run on the exception stacks. Expand the use of preempt_conditional_{sti,cli} to all cases where interrupts are to be re-enabled during exception handling while running on an IST stack. Based on original patch from Jan Beulich. Cc: John Blackwood <john.blackwood@ccur.com> Cc: jbeulich@novell.com Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-05-15 12:19:47 -04:00
preempt_conditional_sti(regs);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 18:20:36 -04:00
do_trap(3, SIGTRAP, "int3", regs, error_code, NULL);
[PATCH] x86_64: Don't schedule on exception stack on preemptive kernels Extends an earlier patch from John Blackwood to more exception handlers that also run on the exception stacks. Expand the use of preempt_conditional_{sti,cli} to all cases where interrupts are to be re-enabled during exception handling while running on an IST stack. Based on original patch from Jan Beulich. Cc: John Blackwood <john.blackwood@ccur.com> Cc: jbeulich@novell.com Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-05-15 12:19:47 -04:00
preempt_conditional_cli(regs);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 18:20:36 -04:00
}
[PATCH] x86_64: Regularize exception stack handling This fixes various issues in the return path for "paranoid" handlers (= running on a private exception stack that act like NMIs). Generalize previous hack to switch back to process stack for scheduling/signal handling purposes. Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-04-16 18:25:03 -04:00
/* Help handler running on IST stack to switch back to user stack
for scheduling or signal handling. The actual stack switch is done in
entry.S */
[PATCH] x86_64: Disallow kprobes on NMI handlers A kprobe executes IRET early and that could cause NMI recursion and stack corruption. Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-02-03 15:50:41 -05:00
asmlinkage __kprobes struct pt_regs *sync_regs(struct pt_regs *eregs)
[PATCH] x86_64: Regularize exception stack handling This fixes various issues in the return path for "paranoid" handlers (= running on a private exception stack that act like NMIs). Generalize previous hack to switch back to process stack for scheduling/signal handling purposes. Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-04-16 18:25:03 -04:00
{
struct pt_regs *regs = eregs;
/* Did already sync */
if (eregs == (struct pt_regs *)eregs->rsp)
;
/* Exception from user space */
[PATCH] xen: x86_64: use more usermode macro Make use of the user_mode macro where it's possible. This is useful for Xen because it will need only to redefine only the macro to a hypervisor call. Signed-off-by: Vincent Hanquez <vincent.hanquez@cl.cam.ac.uk> Cc: Ian Pratt <m+Ian.Pratt@cl.cam.ac.uk> Cc: Andi Kleen <ak@muc.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-23 03:08:46 -04:00
else if (user_mode(eregs))
[PATCH] amd64: task_pt_regs() Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-12 04:05:38 -05:00
regs = task_pt_regs(current);
[PATCH] x86_64: Regularize exception stack handling This fixes various issues in the return path for "paranoid" handlers (= running on a private exception stack that act like NMIs). Generalize previous hack to switch back to process stack for scheduling/signal handling purposes. Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-04-16 18:25:03 -04:00
/* Exception from kernel and interrupts are enabled. Move to
kernel process stack. */
else if (eregs->eflags & X86_EFLAGS_IF)
regs = (struct pt_regs *)(eregs->rsp -= sizeof(struct pt_regs));
if (eregs != regs)
*regs = *eregs;
return regs;
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 18:20:36 -04:00
/* runs on IST stack. */
[PATCH] kprobes: prevent possible race conditions x86_64 changes This patch contains the x86_64 architecture specific changes to prevent the possible race conditions. Signed-off-by: Prasanna S Panchamukhi <prasanna@in.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-06 18:19:28 -04:00
asmlinkage void __kprobes do_debug(struct pt_regs * regs,
unsigned long error_code)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 18:20:36 -04:00
{
unsigned long condition;
struct task_struct *tsk = current;
siginfo_t info;
[PATCH] xen: x86_64: Add macro for debugreg Add 2 macros to set and get debugreg on x86_64. This is useful for Xen because it will need only to redefine each macro to a hypervisor call. Signed-off-by: Vincent Hanquez <vincent.hanquez@cl.cam.ac.uk> Cc: Ian Pratt <m+Ian.Pratt@cl.cam.ac.uk> Cc: Andi Kleen <ak@muc.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-23 03:08:46 -04:00
get_debugreg(condition, 6);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 18:20:36 -04:00
if (notify_die(DIE_DEBUG, "debug", regs, condition, error_code,
[PATCH] x86_64: Keep only a single debug notifier chain Calling a notifier three times in the debug handler does not make much sense, because a debugger can figure out the various conditions by itself. Remove the additional calls to DIE_DEBUG and DIE_DEBUGSTEP completely. This matches what i386 does now. This also makes sure interrupts are always still disabled when calling a debugger, which prevents: BUG: using smp_processor_id() in preemptible [00000001] code: tpopf/1470 caller is post_kprobe_handler+0x9/0x70 Call Trace:<ffffffff8024f10f>{smp_processor_id+191} <ffffffff80120e69>{post_kpro be_handler+9} <ffffffff80120f7a>{kprobe_exceptions_notify+58} <ffffffff80144fc0>{notifier_call_chain+32} <ffffffff80110daf>{do_debug+335} <ffffffff8010f513>{debug+127} <EOE> on preemptible debug kernels with kprobes when single stepping in user space. This was probably a bug even on non preempt kernels, this function was supposed to be running with interrupts off according to a comment there. Note to third part debugger maintainers: please double check your debugger can still single step. Cc: <prasanna@in.ibm.com> Cc: <jbeulich@novell.com> Cc: <kaos@sgi.com> Cc: <jim.houston@ccur.com> Cc: <jfv@bluesong.net> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-04-16 18:25:13 -04:00
SIGTRAP) == NOTIFY_STOP)
[PATCH] x86_64: Regularize exception stack handling This fixes various issues in the return path for "paranoid" handlers (= running on a private exception stack that act like NMIs). Generalize previous hack to switch back to process stack for scheduling/signal handling purposes. Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-04-16 18:25:03 -04:00
return;
[PATCH] x86_64: Keep only a single debug notifier chain Calling a notifier three times in the debug handler does not make much sense, because a debugger can figure out the various conditions by itself. Remove the additional calls to DIE_DEBUG and DIE_DEBUGSTEP completely. This matches what i386 does now. This also makes sure interrupts are always still disabled when calling a debugger, which prevents: BUG: using smp_processor_id() in preemptible [00000001] code: tpopf/1470 caller is post_kprobe_handler+0x9/0x70 Call Trace:<ffffffff8024f10f>{smp_processor_id+191} <ffffffff80120e69>{post_kpro be_handler+9} <ffffffff80120f7a>{kprobe_exceptions_notify+58} <ffffffff80144fc0>{notifier_call_chain+32} <ffffffff80110daf>{do_debug+335} <ffffffff8010f513>{debug+127} <EOE> on preemptible debug kernels with kprobes when single stepping in user space. This was probably a bug even on non preempt kernels, this function was supposed to be running with interrupts off according to a comment there. Note to third part debugger maintainers: please double check your debugger can still single step. Cc: <prasanna@in.ibm.com> Cc: <jbeulich@novell.com> Cc: <kaos@sgi.com> Cc: <jim.houston@ccur.com> Cc: <jfv@bluesong.net> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-04-16 18:25:13 -04:00
[PATCH] arch/x86_64/kernel/traps.c PTRACE_SINGLESTEP oops We found a problem with x86_64 kernels with preemption enabled, where having multiple tasks doing ptrace singlesteps around the same time will cause the system to 'oops'. The problem seems that a task can get preempted out of the do_debug() processing while it is running on the DEBUG_STACK stack. If another task on that same cpu then enters do_debug() and uses the same per-cpu DEBUG_STACK stack, the previous preempted tasks's stack contents can be corrupted, and the system will oops when the preempted task is context switched back in again. The typical oops looks like the following: Unable to handle kernel paging request at ffffffffffffffae RIP: <ffffffff805452a1>{thread_return+34} PGD 103027 PUD 102429067 PMD 0 Oops: 0002 [1] PREEMPT SMP CPU 0 Modules linked in: Pid: 3786, comm: ssdd Not tainted 2.6.15.2 #1 RIP: 0010:[<ffffffff805452a1>] <ffffffff805452a1>{thread_return+34} RSP: 0018:ffffffff80824058 EFLAGS: 000136c2 RAX: ffff81017e12cea0 RBX: 0000000000000000 RCX: 00000000c0000100 RDX: 0000000000000000 RSI: ffff8100f7856e20 RDI: ffff81017e12cea0 RBP: 0000000000000046 R08: ffff8100f68a6000 R09: 0000000000000000 R10: 0000000000000000 R11: ffff81017e12cea0 R12: ffff81000c2d53e8 R13: ffff81017f5b3be8 R14: ffff81000c0036e0 R15: 000001056cbfc899 FS: 00002aaaaaad9b00(0000) GS:ffffffff80883800(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: ffffffffffffffae CR3: 00000000f6fcf000 CR4: 00000000000006e0 Process ssdd (pid: 3786, threadinfo ffff8100f68a6000, task ffff8100f7856e20) Stack: ffffffff808240d8 ffffffff8012a84a ffff8100055f6c00 0000000000000020 0000000000000001 ffff81000c0036e0 ffffffff808240b8 0000000000000000 0000000000000000 0000000000000000 Call Trace: <#DB> <ffffffff8012a84a>{try_to_wake_up+985} <ffffffff8012c0d3>{kick_process+87} <ffffffff8013b262>{signal_wake_up+48} <ffffffff8013b5ce>{specific_send_sig_info+179} <ffffffff80546abc>{_spin_unlock_irqrestore+27} <ffffffff8013b67c>{force_sig_info+159} <ffffffff801103a0>{do_debug+289} <ffffffff80110278>{sync_regs+103} <ffffffff8010ed9a>{paranoid_userspace+35} Unable to handle kernel paging request at 00007fffffb7d000 RIP: <ffffffff8010f2e4>{show_trace+465} PGD f6f25067 PUD f6fcc067 PMD f6957067 PTE 0 Oops: 0000 [2] PREEMPT SMP This patch disables preemptions for the task upon entry to do_debug(), before interrupts are reenabled, and then disables preemption before exiting do_debug(), after disabling interrupts. I've noticed that the task can be preempted either at the end of an interrupt, or on the call to force_sig_info() on the spin_unlock_irqrestore() processing. It might be better to attempt to code a fix in entry.S around the code that calls do_debug(). Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-02-12 17:34:58 -05:00
preempt_conditional_sti(regs);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 18:20:36 -04:00
/* Mask out spurious debug traps due to lazy DR7 setting */
if (condition & (DR_TRAP0|DR_TRAP1|DR_TRAP2|DR_TRAP3)) {
if (!tsk->thread.debugreg7) {
goto clear_dr7;
}
}
tsk->thread.debugreg6 = condition;
/* Mask out spurious TF errors due to lazy TF clearing */
[PATCH] x86_64: Keep only a single debug notifier chain Calling a notifier three times in the debug handler does not make much sense, because a debugger can figure out the various conditions by itself. Remove the additional calls to DIE_DEBUG and DIE_DEBUGSTEP completely. This matches what i386 does now. This also makes sure interrupts are always still disabled when calling a debugger, which prevents: BUG: using smp_processor_id() in preemptible [00000001] code: tpopf/1470 caller is post_kprobe_handler+0x9/0x70 Call Trace:<ffffffff8024f10f>{smp_processor_id+191} <ffffffff80120e69>{post_kpro be_handler+9} <ffffffff80120f7a>{kprobe_exceptions_notify+58} <ffffffff80144fc0>{notifier_call_chain+32} <ffffffff80110daf>{do_debug+335} <ffffffff8010f513>{debug+127} <EOE> on preemptible debug kernels with kprobes when single stepping in user space. This was probably a bug even on non preempt kernels, this function was supposed to be running with interrupts off according to a comment there. Note to third part debugger maintainers: please double check your debugger can still single step. Cc: <prasanna@in.ibm.com> Cc: <jbeulich@novell.com> Cc: <kaos@sgi.com> Cc: <jim.houston@ccur.com> Cc: <jfv@bluesong.net> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-04-16 18:25:13 -04:00
if (condition & DR_STEP) {
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 18:20:36 -04:00
/*
* The TF error should be masked out only if the current
* process is not traced and if the TRAP flag has been set
* previously by a tracing process (condition detected by
* the PT_DTRACE flag); remember that the i386 TRAP flag
* can be modified by the process itself in user mode,
* allowing programs to debug themselves without the ptrace()
* interface.
*/
[PATCH] xen: x86_64: use more usermode macro Make use of the user_mode macro where it's possible. This is useful for Xen because it will need only to redefine only the macro to a hypervisor call. Signed-off-by: Vincent Hanquez <vincent.hanquez@cl.cam.ac.uk> Cc: Ian Pratt <m+Ian.Pratt@cl.cam.ac.uk> Cc: Andi Kleen <ak@muc.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-23 03:08:46 -04:00
if (!user_mode(regs))
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 18:20:36 -04:00
goto clear_TF_reenable;
[PATCH] x86_64: Some fixes for single step handling Ported from i386/Linus Be more careful with TF handling to fix some copy protection codes in Wine Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-04-16 18:24:57 -04:00
/*
* Was the TF flag set by a debugger? If so, clear it now,
* so that register information is correct.
*/
if (tsk->ptrace & PT_DTRACE) {
regs->eflags &= ~TF_MASK;
tsk->ptrace &= ~PT_DTRACE;
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 18:20:36 -04:00
}
/* Ok, finally something we can handle */
tsk->thread.trap_no = 1;
tsk->thread.error_code = error_code;
info.si_signo = SIGTRAP;
info.si_errno = 0;
info.si_code = TRAP_BRKPT;
[PATCH] x86_64: Report hardware breakpoints in user space when triggered by the kernel I would like to throw out a suggestion for a possible change in the way that the debug register traps are handled in do_debug() when the trap occurs in kernel-mode. In the x86_64 version of do_debug(), the code will skip around sending a SIGTRAP to the current task if the trap occurred while in kernel mode. On the i386-side of things, if the access happens to occur in kernel mode (say during a read(2) of user's buffer that matches the address of a debug register trap), then the do_debug() routine for i386 will go ahead and call send_sigtrap() and send the SIGTRAP signal. The send_sigtrap() code will also set the info.si_addr to NULL in this case (even though I don't understand why, since the SIGTRAP siginfo processing doesn't use the si_addr field...). So I would like to suggest that the x86_64 do_debug() routine also follow this type of behavior and have it go ahead and send the SIGTRAP signal to the current task, even if the debug register trap happens to have occurred in kernel mode. I have taken a stab at a patch for this change below. (It includes the i386-ish change for setting si_addr to NULL when the trap occurred in kernel mode.) It seems like a useful feature to be able to 'watch' a user location that might also be modified in the kernel via a system service call, and have the debugger report that information back to the user, rather than to just silently ignore the trap. Additionally, I realize that users that pull in a kernel debugger such as KGDB into their kernel might want to remove this change below when they add in KGDB support. However, they could alternatively look at the current task's thread.debugreg[] values to see if the trap occurred due to KGDB or instead because of a user-space debugger trap, and still honor the user SIGTRAP processing (instead of the KGDB breakpoint processing) if the trap matches up with the thread.debugreg[] registers. Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-11 16:44:15 -05:00
info.si_addr = user_mode(regs) ? (void __user *)regs->rip : NULL;
force_sig_info(SIGTRAP, &info, tsk);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 18:20:36 -04:00
clear_dr7:
[PATCH] xen: x86_64: Add macro for debugreg Add 2 macros to set and get debugreg on x86_64. This is useful for Xen because it will need only to redefine each macro to a hypervisor call. Signed-off-by: Vincent Hanquez <vincent.hanquez@cl.cam.ac.uk> Cc: Ian Pratt <m+Ian.Pratt@cl.cam.ac.uk> Cc: Andi Kleen <ak@muc.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-23 03:08:46 -04:00
set_debugreg(0UL, 7);
[PATCH] arch/x86_64/kernel/traps.c PTRACE_SINGLESTEP oops We found a problem with x86_64 kernels with preemption enabled, where having multiple tasks doing ptrace singlesteps around the same time will cause the system to 'oops'. The problem seems that a task can get preempted out of the do_debug() processing while it is running on the DEBUG_STACK stack. If another task on that same cpu then enters do_debug() and uses the same per-cpu DEBUG_STACK stack, the previous preempted tasks's stack contents can be corrupted, and the system will oops when the preempted task is context switched back in again. The typical oops looks like the following: Unable to handle kernel paging request at ffffffffffffffae RIP: <ffffffff805452a1>{thread_return+34} PGD 103027 PUD 102429067 PMD 0 Oops: 0002 [1] PREEMPT SMP CPU 0 Modules linked in: Pid: 3786, comm: ssdd Not tainted 2.6.15.2 #1 RIP: 0010:[<ffffffff805452a1>] <ffffffff805452a1>{thread_return+34} RSP: 0018:ffffffff80824058 EFLAGS: 000136c2 RAX: ffff81017e12cea0 RBX: 0000000000000000 RCX: 00000000c0000100 RDX: 0000000000000000 RSI: ffff8100f7856e20 RDI: ffff81017e12cea0 RBP: 0000000000000046 R08: ffff8100f68a6000 R09: 0000000000000000 R10: 0000000000000000 R11: ffff81017e12cea0 R12: ffff81000c2d53e8 R13: ffff81017f5b3be8 R14: ffff81000c0036e0 R15: 000001056cbfc899 FS: 00002aaaaaad9b00(0000) GS:ffffffff80883800(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: ffffffffffffffae CR3: 00000000f6fcf000 CR4: 00000000000006e0 Process ssdd (pid: 3786, threadinfo ffff8100f68a6000, task ffff8100f7856e20) Stack: ffffffff808240d8 ffffffff8012a84a ffff8100055f6c00 0000000000000020 0000000000000001 ffff81000c0036e0 ffffffff808240b8 0000000000000000 0000000000000000 0000000000000000 Call Trace: <#DB> <ffffffff8012a84a>{try_to_wake_up+985} <ffffffff8012c0d3>{kick_process+87} <ffffffff8013b262>{signal_wake_up+48} <ffffffff8013b5ce>{specific_send_sig_info+179} <ffffffff80546abc>{_spin_unlock_irqrestore+27} <ffffffff8013b67c>{force_sig_info+159} <ffffffff801103a0>{do_debug+289} <ffffffff80110278>{sync_regs+103} <ffffffff8010ed9a>{paranoid_userspace+35} Unable to handle kernel paging request at 00007fffffb7d000 RIP: <ffffffff8010f2e4>{show_trace+465} PGD f6f25067 PUD f6fcc067 PMD f6957067 PTE 0 Oops: 0000 [2] PREEMPT SMP This patch disables preemptions for the task upon entry to do_debug(), before interrupts are reenabled, and then disables preemption before exiting do_debug(), after disabling interrupts. I've noticed that the task can be preempted either at the end of an interrupt, or on the call to force_sig_info() on the spin_unlock_irqrestore() processing. It might be better to attempt to code a fix in entry.S around the code that calls do_debug(). Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-02-12 17:34:58 -05:00
preempt_conditional_cli(regs);
[PATCH] x86_64: Regularize exception stack handling This fixes various issues in the return path for "paranoid" handlers (= running on a private exception stack that act like NMIs). Generalize previous hack to switch back to process stack for scheduling/signal handling purposes. Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-04-16 18:25:03 -04:00
return;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 18:20:36 -04:00
clear_TF_reenable:
set_tsk_thread_flag(tsk, TIF_SINGLESTEP);
regs->eflags &= ~TF_MASK;
[PATCH] arch/x86_64/kernel/traps.c PTRACE_SINGLESTEP oops We found a problem with x86_64 kernels with preemption enabled, where having multiple tasks doing ptrace singlesteps around the same time will cause the system to 'oops'. The problem seems that a task can get preempted out of the do_debug() processing while it is running on the DEBUG_STACK stack. If another task on that same cpu then enters do_debug() and uses the same per-cpu DEBUG_STACK stack, the previous preempted tasks's stack contents can be corrupted, and the system will oops when the preempted task is context switched back in again. The typical oops looks like the following: Unable to handle kernel paging request at ffffffffffffffae RIP: <ffffffff805452a1>{thread_return+34} PGD 103027 PUD 102429067 PMD 0 Oops: 0002 [1] PREEMPT SMP CPU 0 Modules linked in: Pid: 3786, comm: ssdd Not tainted 2.6.15.2 #1 RIP: 0010:[<ffffffff805452a1>] <ffffffff805452a1>{thread_return+34} RSP: 0018:ffffffff80824058 EFLAGS: 000136c2 RAX: ffff81017e12cea0 RBX: 0000000000000000 RCX: 00000000c0000100 RDX: 0000000000000000 RSI: ffff8100f7856e20 RDI: ffff81017e12cea0 RBP: 0000000000000046 R08: ffff8100f68a6000 R09: 0000000000000000 R10: 0000000000000000 R11: ffff81017e12cea0 R12: ffff81000c2d53e8 R13: ffff81017f5b3be8 R14: ffff81000c0036e0 R15: 000001056cbfc899 FS: 00002aaaaaad9b00(0000) GS:ffffffff80883800(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: ffffffffffffffae CR3: 00000000f6fcf000 CR4: 00000000000006e0 Process ssdd (pid: 3786, threadinfo ffff8100f68a6000, task ffff8100f7856e20) Stack: ffffffff808240d8 ffffffff8012a84a ffff8100055f6c00 0000000000000020 0000000000000001 ffff81000c0036e0 ffffffff808240b8 0000000000000000 0000000000000000 0000000000000000 Call Trace: <#DB> <ffffffff8012a84a>{try_to_wake_up+985} <ffffffff8012c0d3>{kick_process+87} <ffffffff8013b262>{signal_wake_up+48} <ffffffff8013b5ce>{specific_send_sig_info+179} <ffffffff80546abc>{_spin_unlock_irqrestore+27} <ffffffff8013b67c>{force_sig_info+159} <ffffffff801103a0>{do_debug+289} <ffffffff80110278>{sync_regs+103} <ffffffff8010ed9a>{paranoid_userspace+35} Unable to handle kernel paging request at 00007fffffb7d000 RIP: <ffffffff8010f2e4>{show_trace+465} PGD f6f25067 PUD f6fcc067 PMD f6957067 PTE 0 Oops: 0000 [2] PREEMPT SMP This patch disables preemptions for the task upon entry to do_debug(), before interrupts are reenabled, and then disables preemption before exiting do_debug(), after disabling interrupts. I've noticed that the task can be preempted either at the end of an interrupt, or on the call to force_sig_info() on the spin_unlock_irqrestore() processing. It might be better to attempt to code a fix in entry.S around the code that calls do_debug(). Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-02-12 17:34:58 -05:00
preempt_conditional_cli(regs);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 18:20:36 -04:00
}
[PATCH] x86_64: make trap information available to die notification handlers This adjusts things so that handlers of the die() notifier will have sufficient information about the trap currently being handled. It also adjusts the notify_die() prototype to (again) match that of i386. Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-11 16:42:14 -05:00
static int kernel_math_error(struct pt_regs *regs, const char *str, int trapnr)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 18:20:36 -04:00
{
const struct exception_table_entry *fixup;
fixup = search_exception_tables(regs->rip);
if (fixup) {
regs->rip = fixup->fixup;
return 1;
}
[PATCH] x86_64: make trap information available to die notification handlers This adjusts things so that handlers of the die() notifier will have sufficient information about the trap currently being handled. It also adjusts the notify_die() prototype to (again) match that of i386. Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-11 16:42:14 -05:00
notify_die(DIE_GPF, str, regs, 0, trapnr, SIGFPE);
[PATCH] x86_64: Make kernel math errors a die() now There were no reports about the previous warning for FPU exceptions in the kernel, so make it a die() now. Also improve the error messages slightly. Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-04-16 18:25:06 -04:00
/* Illegal floating point operation in the kernel */
[PATCH] x86_64: make trap information available to die notification handlers This adjusts things so that handlers of the die() notifier will have sufficient information about the trap currently being handled. It also adjusts the notify_die() prototype to (again) match that of i386. Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-11 16:42:14 -05:00
current->thread.trap_no = trapnr;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 18:20:36 -04:00
die(str, regs, 0);
return 0;
}
/*
* Note that we play around with the 'TS' bit in an attempt to get
* the correct behaviour even in the presence of the asynchronous
* IRQ13 behaviour
*/
asmlinkage void do_coprocessor_error(struct pt_regs *regs)
{
void __user *rip = (void __user *)(regs->rip);
struct task_struct * task;
siginfo_t info;
unsigned short cwd, swd;
conditional_sti(regs);
[PATCH] xen: x86_64: use more usermode macro Make use of the user_mode macro where it's possible. This is useful for Xen because it will need only to redefine only the macro to a hypervisor call. Signed-off-by: Vincent Hanquez <vincent.hanquez@cl.cam.ac.uk> Cc: Ian Pratt <m+Ian.Pratt@cl.cam.ac.uk> Cc: Andi Kleen <ak@muc.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-23 03:08:46 -04:00
if (!user_mode(regs) &&
[PATCH] x86_64: make trap information available to die notification handlers This adjusts things so that handlers of the die() notifier will have sufficient information about the trap currently being handled. It also adjusts the notify_die() prototype to (again) match that of i386. Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-11 16:42:14 -05:00
kernel_math_error(regs, "kernel x87 math error", 16))
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 18:20:36 -04:00
return;
/*
* Save the info for the exception handler and clear the error.
*/
task = current;
save_init_fpu(task);
task->thread.trap_no = 16;
task->thread.error_code = 0;
info.si_signo = SIGFPE;
info.si_errno = 0;
info.si_code = __SI_FAULT;
info.si_addr = rip;
/*
* (~cwd & swd) will mask out exceptions that are not set to unmasked
* status. 0x3f is the exception bits in these regs, 0x200 is the
* C1 reg you need in case of a stack fault, 0x040 is the stack
* fault bit. We should only be taking one exception at a time,
* so if this combination doesn't produce any single exception,
* then we have a bad program that isn't synchronizing its FPU usage
* and it will suffer the consequences since we won't be able to
* fully reproduce the context of the exception
*/
cwd = get_fpu_cwd(task);
swd = get_fpu_swd(task);
[PATCH] x86-64: Fix incorrect FP signals This is the same patch that went into i386 just before 2.6.13 came out. I still can't build 64-bit user apps, so I tested with program (see below) in 32-bit mode on 64-bit kernel: Before: $ fpsig handler: nr = 8, si = 0x0804bc90, vuc = 0x0804bd10 handler: altstack is at 0x0804b000, ebp = 0x0804bc7c handler: si_signo = 8, si_errno = 0, si_code = 0 [unknown] handler: fpu cwd = 0xb40, fpu swd = 0xbaa0 handler: i387 unmasked precision exception, rounded up After: $ fpsig handler: nr = 8, si = 0x0804bc90, vuc = 0x0804bd10 handler: altstack is at 0x0804b000, ebp = 0x0804bc7c handler: si_signo = 8, si_errno = 0, si_code = 6 [inexact result] handler: fpu cwd = 0xb40, fpu swd = 0xbaa0 handler: i387 unmasked precision exception, rounded up Signed-off-by: Chuck Ebbert <76306.1226@compuserve.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-12 12:49:25 -04:00
switch (swd & ~cwd & 0x3f) {
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 18:20:36 -04:00
case 0x000:
default:
break;
case 0x001: /* Invalid Op */
[PATCH] x86-64: Fix incorrect FP signals This is the same patch that went into i386 just before 2.6.13 came out. I still can't build 64-bit user apps, so I tested with program (see below) in 32-bit mode on 64-bit kernel: Before: $ fpsig handler: nr = 8, si = 0x0804bc90, vuc = 0x0804bd10 handler: altstack is at 0x0804b000, ebp = 0x0804bc7c handler: si_signo = 8, si_errno = 0, si_code = 0 [unknown] handler: fpu cwd = 0xb40, fpu swd = 0xbaa0 handler: i387 unmasked precision exception, rounded up After: $ fpsig handler: nr = 8, si = 0x0804bc90, vuc = 0x0804bd10 handler: altstack is at 0x0804b000, ebp = 0x0804bc7c handler: si_signo = 8, si_errno = 0, si_code = 6 [inexact result] handler: fpu cwd = 0xb40, fpu swd = 0xbaa0 handler: i387 unmasked precision exception, rounded up Signed-off-by: Chuck Ebbert <76306.1226@compuserve.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-12 12:49:25 -04:00
/*
* swd & 0x240 == 0x040: Stack Underflow
* swd & 0x240 == 0x240: Stack Overflow
* User must clear the SF bit (0x40) if set
*/
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 18:20:36 -04:00
info.si_code = FPE_FLTINV;
break;
case 0x002: /* Denormalize */
case 0x010: /* Underflow */
info.si_code = FPE_FLTUND;
break;
case 0x004: /* Zero Divide */
info.si_code = FPE_FLTDIV;
break;
case 0x008: /* Overflow */
info.si_code = FPE_FLTOVF;
break;
case 0x020: /* Precision */
info.si_code = FPE_FLTRES;
break;
}
force_sig_info(SIGFPE, &info, task);
}
asmlinkage void bad_intr(void)
{
printk("bad interrupt");
}
asmlinkage void do_simd_coprocessor_error(struct pt_regs *regs)
{
void __user *rip = (void __user *)(regs->rip);
struct task_struct * task;
siginfo_t info;
unsigned short mxcsr;
conditional_sti(regs);
[PATCH] xen: x86_64: use more usermode macro Make use of the user_mode macro where it's possible. This is useful for Xen because it will need only to redefine only the macro to a hypervisor call. Signed-off-by: Vincent Hanquez <vincent.hanquez@cl.cam.ac.uk> Cc: Ian Pratt <m+Ian.Pratt@cl.cam.ac.uk> Cc: Andi Kleen <ak@muc.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-23 03:08:46 -04:00
if (!user_mode(regs) &&
[PATCH] x86_64: make trap information available to die notification handlers This adjusts things so that handlers of the die() notifier will have sufficient information about the trap currently being handled. It also adjusts the notify_die() prototype to (again) match that of i386. Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-11 16:42:14 -05:00
kernel_math_error(regs, "kernel simd math error", 19))
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 18:20:36 -04:00
return;
/*
* Save the info for the exception handler and clear the error.
*/
task = current;
save_init_fpu(task);
task->thread.trap_no = 19;
task->thread.error_code = 0;
info.si_signo = SIGFPE;
info.si_errno = 0;
info.si_code = __SI_FAULT;
info.si_addr = rip;
/*
* The SIMD FPU exceptions are handled a little differently, as there
* is only a single status/control register. Thus, to determine which
* unmasked exception was caught we must mask the exception mask bits
* at 0x1f80, and then use these to mask the exception bits at 0x3f.
*/
mxcsr = get_fpu_mxcsr(task);
switch (~((mxcsr & 0x1f80) >> 7) & (mxcsr & 0x3f)) {
case 0x000:
default:
break;
case 0x001: /* Invalid Op */
info.si_code = FPE_FLTINV;
break;
case 0x002: /* Denormalize */
case 0x010: /* Underflow */
info.si_code = FPE_FLTUND;
break;
case 0x004: /* Zero Divide */
info.si_code = FPE_FLTDIV;
break;
case 0x008: /* Overflow */
info.si_code = FPE_FLTOVF;
break;
case 0x020: /* Precision */
info.si_code = FPE_FLTRES;
break;
}
force_sig_info(SIGFPE, &info, task);
}
asmlinkage void do_spurious_interrupt_bug(struct pt_regs * regs)
{
}
asmlinkage void __attribute__((weak)) smp_thermal_interrupt(void)
[PATCH] x86_64: Support for AMD specific MCE Threshold. MC4_MISC - DRAM Errors Threshold Register realized under AMD K8 Rev F. This register is used to count correctable and uncorrectable ECC errors that occur during DRAM read operations. The user may interface through sysfs files in order to change the threshold configuration. bank%d/error_count - reads current error count, write to clear. bank%d/interrupt_enable - set/clear interrupt enable. bank%d/threshold_limit - read/write the threshold limit. APIC vector 0xF9 in hw_irq.h. 5 software defined bank ids in mce.h. new apic.c function to setup threshold apic lvt. defaults to interrupt off, count enabled, and threshold limit max. sysfs interface created on /sys/devices/system/threshold. AK: added some ifdefs to make it compile on UP Signed-off-by: Jacob Shin <jacob.shin@amd.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-05 11:25:53 -05:00
{
}
asmlinkage void __attribute__((weak)) mce_threshold_interrupt(void)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 18:20:36 -04:00
{
}
/*
* 'math_state_restore()' saves the current math information in the
* old math state array, and gets the new ones from the current task
*
* Careful.. There are problems with IBM-designed IRQ13 behaviour.
* Don't touch unless you *really* know how it works.
*/
asmlinkage void math_state_restore(void)
{
struct task_struct *me = current;
clts(); /* Allow maths ops (or we recurse) */
if (!used_math())
init_fpu(me);
restore_fpu_checking(&me->thread.i387.fxsave);
[PATCH] amd64: task_thread_info() Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-12 04:05:38 -05:00
task_thread_info(me)->status |= TS_USEDFPU;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 18:20:36 -04:00
}
void __init trap_init(void)
{
set_intr_gate(0,&divide_error);
set_intr_gate_ist(1,&debug,DEBUG_STACK);
set_intr_gate_ist(2,&nmi,NMI_STACK);
[PATCH] x86_64: Move int 3 handler to debug stack and allow to increase it. This - switches the INT3 handler to run on an IST stack (to cope with breakpoints set by a kernel debugger on places where the kernel's %gs base hasn't been set up, yet); the IST stack used is shared with the INT1 handler's [AK: this also allows setting a kprobe on the interrupt/exception entry points] - allows nesting of INT1/INT3 handlers so that one can, with a kernel debugger, debug (at least) the user-mode portions of the INT1/INT3 handling; the nesting isn't actively enabled here since a kernel- debugger-free kernel doesn't need it Signed-Off-By: Jan Beulich <jbeulich@novell.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-11 16:43:00 -05:00
set_system_gate_ist(3,&int3,DEBUG_STACK); /* int3 can be called from all */
[PATCH] x86_64: fix bound check IDT gate Other than apparently commonly assumed, the bound instruction does not require the corresponding IDT entry to have DPL 3. Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-11 16:42:08 -05:00
set_system_gate(4,&overflow); /* int4 can be called from all */
set_intr_gate(5,&bounds);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 18:20:36 -04:00
set_intr_gate(6,&invalid_op);
set_intr_gate(7,&device_not_available);
set_intr_gate_ist(8,&double_fault, DOUBLEFAULT_STACK);
set_intr_gate(9,&coprocessor_segment_overrun);
set_intr_gate(10,&invalid_TSS);
set_intr_gate(11,&segment_not_present);
set_intr_gate_ist(12,&stack_segment,STACKFAULT_STACK);
set_intr_gate(13,&general_protection);
set_intr_gate(14,&page_fault);
set_intr_gate(15,&spurious_interrupt_bug);
set_intr_gate(16,&coprocessor_error);
set_intr_gate(17,&alignment_check);
#ifdef CONFIG_X86_MCE
set_intr_gate_ist(18,&machine_check, MCE_STACK);
#endif
set_intr_gate(19,&simd_coprocessor_error);
#ifdef CONFIG_IA32_EMULATION
set_system_gate(IA32_SYSCALL_VECTOR, ia32_syscall);
#endif
/*
* Should be a barrier for any external CPU state.
*/
cpu_init();
}
/* Actual parsing is done early in setup.c. */
static int __init oops_dummy(char *s)
{
panic_on_oops = 1;
[PATCH] Don't pass boot parameters to argv_init[] The boot cmdline is parsed in parse_early_param() and parse_args(,unknown_bootoption). And __setup() is used in obsolete_checksetup(). start_kernel() -> parse_args() -> unknown_bootoption() -> obsolete_checksetup() If __setup()'s callback (->setup_func()) returns 1 in obsolete_checksetup(), obsolete_checksetup() thinks a parameter was handled. If ->setup_func() returns 0, obsolete_checksetup() tries other ->setup_func(). If all ->setup_func() that matched a parameter returns 0, a parameter is seted to argv_init[]. Then, when runing /sbin/init or init=app, argv_init[] is passed to the app. If the app doesn't ignore those arguments, it will warning and exit. This patch fixes a wrong usage of it, however fixes obvious one only. Signed-off-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-31 05:30:33 -05:00
return 1;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 18:20:36 -04:00
}
__setup("oops=", oops_dummy);
static int __init kstack_setup(char *s)
{
kstack_depth_to_print = simple_strtoul(s,NULL,0);
[PATCH] Don't pass boot parameters to argv_init[] The boot cmdline is parsed in parse_early_param() and parse_args(,unknown_bootoption). And __setup() is used in obsolete_checksetup(). start_kernel() -> parse_args() -> unknown_bootoption() -> obsolete_checksetup() If __setup()'s callback (->setup_func()) returns 1 in obsolete_checksetup(), obsolete_checksetup() thinks a parameter was handled. If ->setup_func() returns 0, obsolete_checksetup() tries other ->setup_func(). If all ->setup_func() that matched a parameter returns 0, a parameter is seted to argv_init[]. Then, when runing /sbin/init or init=app, argv_init[] is passed to the app. If the app doesn't ignore those arguments, it will warning and exit. This patch fixes a wrong usage of it, however fixes obvious one only. Signed-off-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-31 05:30:33 -05:00
return 1;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 18:20:36 -04:00
}
__setup("kstack=", kstack_setup);
Reference in New Issue Copy Permalink