Commit Graph

123192 Commits

Author SHA1 Message Date
Klaus-Dieter Wacker
015e691cfe qeth: No large send using EDDP for HiperSockets.
From: Klaus-Dieter Wacker <kdwacker@de.ibm.com>

The device driver qeth dos not support large send using EDDP for 
HiperSockets.

Signed-off-by: Klaus-Dieter Wacker <kdwacker@de.ibm.com>
Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-04 17:36:05 -08:00
Frank Blaschka
5b54e16f1a qeth: do not spin for SETIP ip assist command
The ip assist hw command for setting an IP address last unacceptable
long so we can not spin while we waiting for the irq. Since we can
ensure process context for all occurrences of this command we can use
wait.

Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-04 17:35:44 -08:00
Ursula Braun
fc9c24603c qeth: avoid crash in case of layer mismatch for VSWITCH
For z/VM GuestLAN or VSWITCH devices the transport layer is
configured in z/VM. The layer2 attribute of a participating Linux
device has to match the z/VM definition. In case of a mismatch
Linux currently crashes in qeth recovery due to a reference to the
not yet existing net_device.
Solution: add a check for existence of net_device and add a message
pointing to the mismatch of layer definitions in Linux and z/VM.

Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com>
Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-04 17:35:18 -08:00
Ursula Braun
fe94e2e0a6 qeth: exploit source MAC address for inbound layer3 packets
OSA-devices operating in layer3 mode offer adding of the source MAC
address to the QDIO header of inbound packets. The qeth driver can
exploit this functionality to replace FAKELL-entries in the ethernet
header of received packets.

Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com>
Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-04 17:34:52 -08:00
Klaus-Dieter Wacker
906f1f0768 qeth: HiperSockets mcl string conversion (pre z9 mach)
The pre z9 machines provide an mcl string in EBCDIC format,
z9 or later provide string in ASCII format.

Signed-off-by: Klaus-Dieter Wacker <kdwacker@de.ibm.com>
Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-04 17:34:10 -08:00
Oliver Hartkopp
6e5c172cf7 can: update can-bcm for hrtimer hardirq callbacks
Since commit ca109491f6 ("hrtimer:
removing all ur callback modes") the hrtimer callbacks are processed
only in hardirq context.

This patch moves some functionality into tasklets to run in softirq
context.

Additionally some duplicated code was removed in bcm_rx_thr_flush()
and an avoidable memcpy was removed from bcm_rx_handler().

Signed-off-by: Oliver Hartkopp <oliver@hartkopp.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-04 17:31:18 -08:00
Roel Kluin
858eb711ba DCB: fix kfree(skb)
Use kfree_skb instead of kfree for struct sk_buff pointers.

Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-04 17:29:21 -08:00
Ilpo Järvinen
914d11647b ipv6: IPV6_PKTINFO relied userspace providing correct length
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi>
Reported-by: Eric Sesterhenn <snakebyte@gmx.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-04 17:27:31 -08:00
Michael Marineau
22604c8668 net: Fix for initial link state in 2.6.28
From: Michael Marineau <mike@marineau.org>

Commit b47300168e "Do not fire linkwatch
events until the device is registered." was made as a workaround for
drivers that call netif_carrier_off before registering the device.
Unfortunately this causes these drivers to incorrectly report their
link status as IF_OPER_UNKNOWN which can falsely set the IFF_RUNNING
flag when the interface is first brought up. This issues was
previously pointed out[1] but was dismissed saying that IFF_RUNNING is
not related to the link status. From my digging IFF_RUNNING, as
reported to userspace, is based on the link state. It is set based on
__LINK_STATE_START and IF_OPER_UP or IF_OPER_UNKNOWN. See [2], [3],
and [4]. (Whether or not the kernel has IFF_RUNNING set in flags is
not reported to user space so it may well be independent of the link,
I don't know if and when it may get set.)

The end result depends slightly depending on the driver. The the two I
tested were e1000e and b44. With e1000e if the system is booted
without a network cable attached the interface will falsely report
RUNNING when it is brought up causing NetworkManager to attempt to
start it and eventually time out. With b44 when the system is booted
with a network cable attached and brought up with dhcpcd it will time
out the first time.

The attached patch that will still set the operstate variable
correctly to IF_OPER_UP/DOWN/etc when linkwatch_fire_event is called
but then return rather than skipping the linkwatch_fire_event call
entirely as the previous fix did. (sorry it isn't inline, I don't have
a patch friendly email client at the moment)

Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-04 17:18:51 -08:00
Gerrit Renker
745417e206 tun: Eliminate sparse signedness warning
register_pernet_gen_device() expects 'int*', found via sparse.

 CHECK   drivers/net/tun.c
 drivers/net/tun.c:1245:36: warning: incorrect type in argument 1 (different signedness)
 drivers/net/tun.c:1245:36:    expected int *id
 drivers/net/tun.c:1245:36:    got unsigned int static [toplevel] *<noident>

Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-04 17:14:46 -08:00
Bruce Allan
f26251eb68 e100: cosmetic cleanup
Add missing space after if, switch, for and while keywords.

Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-04 17:12:04 -08:00
Simon Holm Thøgersen
f32f8b72e0 net/rfkill/rfkill.c: fix unused rfkill_led_trigger() warning
commit 4dec9b807b ("rfkill: strip pointless
notifier chain") removed the only user of rfkill_led_trigger() that was not
guarded by #ifdef CONFIG_RFKILL_LEDS. Therefore, move rfkill_led_trigger()
completely inside #ifdef CONFIG_RFKILL_LEDS and avoid the compile time
warning:

net/rfkill/rfkill.c:59: warning: 'rfkill_led_trigger' defined but not used

Signed-off-by: Simon Holm Thøgersen <odie@cs.aau.dk>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-04 17:11:24 -08:00
Ron Mercer
939678f81a qlge: bugfix: Fix register access error checking.
Some indexed registers do not have error bits. In these cases a
value of zero should be used for error checking.

Signed-off-by: Ron Mercer <ron.mercer@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-04 17:08:29 -08:00
Ron Mercer
459caf5a99 qlge: bugfix: Fix ring length setting for rx ring, large/small
The length field for these rings is 16-bits.  If the length is
the max supported 65536 then the setting should be zero.

Signed-off-by: Ron Mercer <ron.mercer@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-04 17:08:11 -08:00
Ron Mercer
2b72c7849f qlge: bugfix: Fix shadow register endian issue.
Shadow registers are consistent memory locations to which the chip
echos ring indexes in little endian format.  These values need to
be endian swapped before referencing.

Note:
The register pointer declaration uses the volatile modifier which
causes warnings in checkpatch.
Per Documentation/volatile-considered-harmful.txt:
  - Pointers to data structures in coherent memory which might be modified
    by I/O devices can, sometimes, legitimately be volatile.  A ring buffer
    used by a network adapter, where that adapter changes pointers to
    indicate which descriptors have been processed, is an example of this
    type of situation.

Signed-off-by: Ron Mercer <ron.mercer@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-04 17:07:50 -08:00
Ron Mercer
4055c7d495 qlge: bugfix: Add missing pci_unmap_page call in receive path.
Signed-off-by: Ron Mercer <ron.mercer@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-04 17:07:09 -08:00
Ron Mercer
c907a35acf qlge: bugfix: Add missing pci_mapping_err checking.
Signed-off-by: Ron Mercer <ron.mercer@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-04 17:06:46 -08:00
Baruch Siach
22692018b9 enc28j60: fix RX buffer overflow
The enc28j60 driver doesn't check whether the length of the packet as reported 
by the hardware fits into the preallocated buffer. When stressed, the hardware 
may report insanely large packets even tough the "Receive OK" bit is set. Fix 
this.

Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-04 16:23:01 -08:00
Roel Kluin
fecc7036e7 isdn: capi: &&/|| typos
Correct two typos.

Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Acked-by: Karsten Keil <kkeil@suse.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-04 16:22:04 -08:00
Herbert Xu
5d38a079ce gro: Add page frag support
This patch allows GRO to merge page frags (skb_shinfo(skb)->frags)
in one skb, rather than using the less efficient frag_list.

It also adds a new interface, napi_gro_frags to allow drivers
to inject page frags directly into the stack without allocating
an skb.  This is intended to be the GRO equivalent for LRO's
lro_receive_frags interface.

The existing GSO interface can already handle page frags with
or without an appended frag_list so nothing needs to be changed
there.

The merging itself is rather simple.  We store any new frag entries
after the last existing entry, without checking whether the first
new entry can be merged with the last existing entry.  Making this
check would actually be easy but since no existing driver can
produce contiguous frags anyway it would just be mental masturbation.

If the total number of entries would exceed the capacity of a
single skb, we simply resort to using frag_list as we do now.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-04 16:13:40 -08:00
Herbert Xu
b530256d2e gro: Use gso_size to store MSS
In order to allow GRO packets without frag_list at all, we need to
store the MSS in the packet itself.  The obvious place is gso_size.
The only thing to watch out for is if the packet ends up not being
GRO then we need to clear gso_size before pushing the packet into
the stack.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-04 16:13:19 -08:00
Jaswinder Singh Rajput
cfc3a44c3c starfire: use request_firmware()
Firmware blob is big endian

Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-04 16:12:11 -08:00
Jaswinder Singh Rajput
077f849de4 firmware: convert tg3 driver to request_firmware()
Firmware blob looks like this...
        u8 firmware_major
        u8 firmware_minor
        u8 firmware_fix
        u8 pad
        __be32 start_address
        __be32 length (total, including BSS sections to be zeroed)
        data... (in __be32 words, which is native for the firmware)

Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-04 16:11:25 -08:00
Jaswinder Singh
949b42544a firmware: convert acenic driver to request_firmware()
We store the firmware in its native big-endian form now, so the loop in
ace_copy() is modified to use be32_to_cpup() when writing it out.

We can forget the BSS,SBSS sections of the firmware, since we were
clearing all the device's RAM anyway. And the text,rodata,data sections
can all be loaded as a single chunk since they're contiguous (give or
take a few dozen bytes in between).

Signed-off-by: Jaswinder Singh <jaswinder@infradead.org>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
Acked-by: Jes Sorensen <jes@sgi.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-04 16:10:02 -08:00
David S. Miller
14deae4156 ipv6: Fix sporadic sendmsg -EINVAL when sending to multicast groups.
Thanks to excellent diagnosis by Eduard Guzovsky.

The core problem is that on a network with lots of active
multicast traffic, the neighbour cache can fill up.  If
we try to allocate a new route and thus neighbour cache
entry, the bog-standard GC attempt the neighbour layer does
in ineffective because route entries hold a reference
to the existing neighbour entries and GC can only liberate
entries with no references.

IPV4 already has a way to handle this, by doing a route cache
GC in such situations (when neigh attach returns -ENOBUFS).

So simply mimick this on the ipv6 side.

Tested-by: Eduard Guzovsky <eguzovsky@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-04 16:04:39 -08:00
Herbert Xu
eb4dea5853 net: Fix percpu counters deadlock
When we converted the protocol atomic counters such as the orphan
count and the total socket count deadlocks were introduced due to
the mismatch in BH status of the spots that used the percpu counter
operations.

Based on the diagnosis and patch by Peter Zijlstra, this patch
fixes these issues by disabling BH where we may be in process
context.

Reported-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Tested-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-29 23:04:08 -08:00
Rusty Russell
0f23174aa8 cpumask: prepare for iterators to only go to nr_cpu_ids/nr_cpumask_bits: net
In future all cpumask ops will only be valid (in general) for bit
numbers < nr_cpu_ids.  So use that instead of NR_CPUS in iterators
and other comparisons.

This is always safe: no cpu number can be >= nr_cpu_ids, and
nr_cpu_ids is initialized to NR_CPUS at boot.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Mike Travis <travis@sgi.com>
Acked-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-29 22:44:47 -08:00
Julia Lawall
f201a8a451 drivers/net/usb: use USB API functions rather than constants
This set of patches introduces calls to the following set of functions:

usb_endpoint_dir_in(epd)
usb_endpoint_dir_out(epd)
usb_endpoint_is_bulk_in(epd)
usb_endpoint_is_bulk_out(epd)
usb_endpoint_is_int_in(epd)
usb_endpoint_is_int_out(epd)
usb_endpoint_num(epd)
usb_endpoint_type(epd)
usb_endpoint_xfer_bulk(epd)
usb_endpoint_xfer_control(epd)
usb_endpoint_xfer_int(epd)
usb_endpoint_xfer_isoc(epd)

In some cases, introducing one of these functions is not possible, and it
just replaces an explicit integer value by one of the following constants:

USB_ENDPOINT_XFER_BULK
USB_ENDPOINT_XFER_CONTROL
USB_ENDPOINT_XFER_INT
USB_ENDPOINT_XFER_ISOC

In drivers/net/wireless/zd1211rw/zd_usb.c the code:

(endpoint->bEndpointAddress & USB_TYPE_MASK) == USB_DIR_OUT

is suspicious.  If it is intended to use USB_ENDPOINT_DIR_MASK rather than
USB_TYPE_MASK, then the whole conditional test could be converted to a call
to usb_endpoint_is_bulk_in.

An extract of the semantic patch that makes these changes is as follows:
(http://www.emn.fr/x-info/coccinelle/)

// <smpl>
@r1@ struct usb_endpoint_descriptor *epd; @@

- ((epd->bmAttributes & \(USB_ENDPOINT_XFERTYPE_MASK\|3\)) ==
- \(USB_ENDPOINT_XFER_CONTROL\|0\))
+ usb_endpoint_xfer_control(epd)

@r5@ struct usb_endpoint_descriptor *epd; @@

- ((epd->bEndpointAddress & \(USB_ENDPOINT_DIR_MASK\|0x80\)) ==
-  \(USB_DIR_IN\|0x80\))
+ usb_endpoint_dir_in(epd)

@inc@
@@

#include <linux/usb.h>

@depends on !inc && (r1||r5)@
@@

+ #include <linux/usb.h>
  #include <linux/usb/...>
// </smpl>

Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-29 19:40:47 -08:00
Li Zefan
68ce9c0e34 cls_cgroup: clean up Kconfig
cls_cgroup can't be compiled as a module, since it's not supported by
cgroup.

Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-29 19:40:46 -08:00
Li Zefan
8e8ba85417 cls_cgroup: clean up for cgroup part
- It's better to use container_of() instead of casting cgroup_subsys_state *
  to cgroup_cls_state *.
- Add helper function task_cls_state().
- Rename net_cls_state() to cgrp_cls_state().

Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-29 19:40:45 -08:00
Li Zefan
2f068bf871 cls_cgroup: fix an oops when removing a cgroup
When removing a cgroup, an oops was triggered immediately. The cause
is wrong kfree() in cgrp_destroy().

Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-29 19:40:44 -08:00
Roel Kluin
684f4a4c4a EtherExpress16: fix printing timed out status
in drivers/net/eexpress.c:558, function unstick_cu()

while (!SCB_complete(rsst=scb_status(dev))) {
	...
	if (...)
		printk(KERN_WARNING "%s: Reset timed out status %04x, retrying...\n",
                                                       dev->name,rsst);
}

but this will become 

while (!((rsst = scb_status(dev) & 0x8000) != 0) ...

because of the macro:

#define SCB_complete(s) ((s&0x8000)!=0)

so rsst can only become either 0x8000 or 0, but in the latter case the
loop ends, I think the wrong timed out status is printed. This also
cleans up similar macros.

Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-29 18:42:33 -08:00
Yevgeny Petrilin
18cc42a3a1 mlx4_en: Added "set_ringparam" Ethtool interface implementation
Now using Ethtool to determine ring sizes, removed the module parameters
that controlled those values.
Modifying ring size requires restart of the interface.

Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-29 18:39:20 -08:00
Yevgeny Petrilin
2d6a7b7559 mlx4_en: Always allocate RX ring for each interrupt vector
Removed module parameter specifying number of RX rings

Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-29 18:38:54 -08:00
Yevgeny Petrilin
c2b559ed86 mlx4_en: Verify number of RX rings doesn't exceed MAX_RX_RINGS
Required in cases were dev->caps.num_comp_vectors > MAX_RX_RINGS.
For current values this would happen on machines that have more
then 16 cores.

Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-29 18:38:21 -08:00
Simon Horman
68888d1053 IPVS: Make "no destination available" message more consistent between schedulers
Acked-by: Graeme Fowler <graeme@graemef.net>
Signed-off-by: Simon Horman <horms@verge.net.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-29 18:37:36 -08:00
Huang Weiyi
c8e95c021c net: KS8695: removed duplicated #include
Removed duplicated include in drivers/net/arm/ks8695net.c.

Signed-off-by: Huang Weiyi <weiyi.huang@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-29 18:30:05 -08:00
Kusanagi Kouichi
7a0a9608e4 tun: Fix SIOCSIFHWADDR error.
Set proper operations.

Signed-off-by: Kusanagi Kouichi <slash@ma.neweb.ne.jp>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-29 18:23:28 -08:00
Alexey Dobriyan
36f8b92383 smsc911x: compile fix re netif_rx signature changes
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Steve Glendinning <steve.glendinning@smsc.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-29 18:22:43 -08:00
Eric W. Biederman
8eb7986396 netns: foreach_netdev_safe is insufficient in default_device_exit
During network namespace teardown we either move or delete
all of the network devices associated with a network namespace.
In the case of veth devices deleting one will also delete it's
pair device.  If both devices are in the same network namespace
then for_each_netdev_safe is insufficient as next may point
to the second veth device we have deleted.

To avoid problems I do what we do in __rtnl_kill_links and
restart the scan of the device list, after we have deleted
a device.

Currently dev_change_netnamespace does not appear to suffer from
this problem, but wireless devices are also paired and likely
should be moved between network namespaces together.  So I have
errored on the side of caution and restart the scan of the network
devices in that case as well.

Signed-off-by: Eric W. Biederman <ebiederm@aristanetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-29 18:21:48 -08:00
Rusty Russell
91b208c7c1 net: make xfrm_statistics_seq_show use generic snmp_fold_field
No reason to roll our own here.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-29 18:20:06 -08:00
Kamalesh Babulal
2d0658d4ef net: Fix more NAPI interface netdev argument drop fallout.
I hit similar build failure due to the change in the netif_rx_reschedule()

drivers/net/ehea/ehea_main.c: In function 'ehea_poll':
drivers/net/ehea/ehea_main.c:844: warning: passing argument 1 of 'netif_rx_reschedule' from incompatible pointer type
drivers/net/ehea/ehea_main.c:844: error: too many arguments to function 'netif_rx_reschedule'
make[3]: *** [drivers/net/ehea/ehea_main.o] Error 1

greping through the sources for the changes missed out, we have

./drivers/net/arm/ixp4xx_eth.c:507:							netif_rx_reschedule(dev, napi)) {
./drivers/net/arm/ep93xx_eth.c:310:             if (more && netif_rx_reschedule(dev, napi))
./drivers/net/wan/ixp4xx_hss.c:657:							netif_rx_reschedule(dev, napi)) {

Signed-off-by: Kamalesh Babulal <kamalesh@linux.vnet.ibm.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-29 18:18:24 -08:00
David S. Miller
59c5ea6ebd net: Fix unused variable warnings in pasemi_mac.c and spider_net.c
As reported by Stephen Rothwell:

--------------------
Today's linux-next build (powerpc ppc64_defconfig) produced these new
warnings:

drivers/net/pasemi_mac.c: In function 'pasemi_mac_rx_intr':
drivers/net/pasemi_mac.c:957: warning: unused variable 'dev'
drivers/net/pasemi_mac.c: In function 'pasemi_mac_poll':
drivers/net/pasemi_mac.c:1637: warning: unused variable 'dev'
drivers/net/spider_net.c: In function 'spider_net_poll':
drivers/net/spider_net.c:1280: warning: unused variable 'netdev'

Probably caused by commit 908a7a16b8 ("net:
Remove unused netdev arg from some NAPI interfaces").
--------------------

Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-28 20:15:38 -08:00
Linus Torvalds
3c92ec8ae9 Merge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc
* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc: (144 commits)
  powerpc/44x: Support 16K/64K base page sizes on 44x
  powerpc: Force memory size to be a multiple of PAGE_SIZE
  powerpc/32: Wire up the trampoline code for kdump
  powerpc/32: Add the ability for a classic ppc kernel to be loaded at 32M
  powerpc/32: Allow __ioremap on RAM addresses for kdump kernel
  powerpc/32: Setup OF properties for kdump
  powerpc/32/kdump: Implement crash_setup_regs() using ppc_save_regs()
  powerpc: Prepare xmon_save_regs for use with kdump
  powerpc: Remove default kexec/crash_kernel ops assignments
  powerpc: Make default kexec/crash_kernel ops implicit
  powerpc: Setup OF properties for ppc32 kexec
  powerpc/pseries: Fix cpu hotplug
  powerpc: Fix KVM build on ppc440
  powerpc/cell: add QPACE as a separate Cell platform
  powerpc/cell: fix build breakage with CONFIG_SPUFS disabled
  powerpc/mpc5200: fix error paths in PSC UART probe function
  powerpc/mpc5200: add rts/cts handling in PSC UART driver
  powerpc/mpc5200: Make PSC UART driver update serial errors counters
  powerpc/mpc5200: Remove obsolete code from mpc5200 MDIO driver
  powerpc/mpc5200: Add MDMA/UDMA support to MPC5200 ATA driver
  ...

Fix trivial conflict in drivers/char/Makefile as per Paul's directions
2008-12-28 16:54:33 -08:00
Stephen Rothwell
c4c9f0183b net: ehea NAPI interface cleanup fix
Commit 908a7a16b8 ("net: Remove unused
netdev arg from some NAPI interfaces") missed two spots.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-12-28 16:32:38 -08:00
Stephen Rothwell
bf66542bef cifs: update for new IP4/6 address printing
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-12-28 16:29:58 -08:00
Linus Torvalds
d05a788f22 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6:
  smackfs: check for allocation failures in smk_set_access()
2008-12-28 15:15:08 -08:00
Linus Torvalds
96faec945f Merge git://git.kernel.org/pub/scm/linux/kernel/git/sam/kbuild-next
* git://git.kernel.org/pub/scm/linux/kernel/git/sam/kbuild-next: (25 commits)
  allow stripping of generated symbols under CONFIG_KALLSYMS_ALL
  kbuild: strip generated symbols from *.ko
  kbuild: simplify use of genksyms
  kernel-doc: check for extra kernel-doc notations
  kbuild: add headerdep used to detect inclusion cycles in header files
  kbuild: fix string equality testing in tags.sh
  kbuild: fix make tags/cscope
  kbuild: fix make incompatibility
  kbuild: remove TAR_IGNORE
  setlocalversion: add git-svn support
  setlocalversion: print correct subversion revision
  scripts: improve the decodecode script
  scripts/package: allow custom options to rpm
  genksyms: allow to ignore symbol checksum changes
  genksyms: track symbol checksum changes
  tags and cscope support really belongs in a shell script
  kconfig: fix options to check-lxdialog.sh
  kbuild: gen_init_cpio expands shell variables in file names
  remove bashisms from scripts/extract-ikconfig
  kbuild: teach mkmakfile to be silent
  ...
2008-12-28 15:13:48 -08:00
Linus Torvalds
2926328554 Merge git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-nvram
* git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-nvram:
  [PATCH] nvram - convert PRINT_PROC to seq_file
  [PATCH] nvram - CodingStyle
2008-12-28 15:12:35 -08:00
James Morris
54d2f649a6 Merge branch 'next' into for-linus 2008-12-29 09:57:38 +11:00