This change adds support for custom csid HW and
programming of user defined interfaces (UDI) in
custom csid block.
CRs-Fixed: 2515662
Change-Id: I4b226b3a3787fbc3e56eb285e9a4dbd6d62edefa
Signed-off-by: Karthik Anantha Ram <kartanan@codeaurora.org>
This change adds a dentry to enable req dump in the case of
hardware errors.
CRs-Fixed: 2513939
Change-Id: I0ae5d6c658964bf33d0e4c1775413aaa9201f7a1
Signed-off-by: Venkat Chinta <vchinta@codeaurora.org>
We need to reset the active req cnt before assigning
new value. Also move the log behind the active req cnt
assignment.
CRs-Fixed: 2517421
Change-Id: I38f418f79f5f1adcb8b29bc870f904cd1f925bfc
Signed-off-by: Depeng Shao <depengs@codeaurora.org>
RDI only context also need to get req from
wait_req_list afte received RUP event in early
PCR case.
CRs-Fixed: 2511798
Change-Id: If2e8da36cf83dee1c348dd0d6c6ea916061a376e
Signed-off-by: Depeng Shao <depengs@codeaurora.org>
In case acquire hw fails, dump the previously acquired
streams to infer the reason for the failure.
CRs-Fixed: 2512474
Change-Id: I3ee2b85e0843ab4a605625950dc60366c0b50713
Signed-off-by: Karthik Anantha Ram <kartanan@codeaurora.org>
Avoid unnecessary logging during shutdown and pagefault
in camera drivers.
CRs-Fixed: 2500721
Change-Id: I2519d45da134306f906186dc25705fc1f84b1972
Signed-off-by: Karthik Anantha Ram <kartanan@codeaurora.org>
Errors in isp are handled in soft irq context, putting a wait for
cdm done is not allowed. Add atomic flag for checking status of
cdm and check it before reg dump to determine the request for
which register values can be dumped in command buffer.This is
only applicable to reg dump on error.
CRs-Fixed: 2510557
Change-Id: If4bfedd1a62078392721c2ea0958da82087f5b26
Signed-off-by: Mukund Madhusudan Atre <matre@codeaurora.org>
When mapping fails for a given context bank, dump all the existing
mappings for that context bank to understand the memory usage
for that bank.
CRs-Fixed: 2513106
Change-Id: Ia17b086dd76378da55cae509255309610820f53f
Signed-off-by: Karthik Anantha Ram <kartanan@codeaurora.org>
This change cleans up a few logs and updates the HFI headers
in line with the current FW.
CRs-Fixed: 2513094
Change-Id: I8853ac3711ad3bf36ce59f6860082fa29dca0bf6
Signed-off-by: Karthik Anantha Ram <kartanan@codeaurora.org>
Add warn log to indicate shutdown has occurred.
Also decrement the open req count after successfully applying
a request.
Change-Id: I1b420dff52e016f52e19c5572824e4ed6f53744b
Signed-off-by: Karthik Anantha Ram <kartanan@codeaurora.org>
Signed-off-by: Mukund Madhusudan Atre <matre@codeaurora.org>
If the resource for which BUF_DONE event has come is already
signalled in the oldest request, this BUF_DONE could be for
the next request in the list. This can happen if the IRQ
handling for BUF_DONE is delayed and by the time it is handled
if the resources for the next request are already signalled
along with other pending resources for the oldest request,
we might handle resources which corresponds to next request
first. If we do not look into next request and thus if we
ignore these BUF_DONEs, we will never be done with the next
request.
Change-Id: I1b20aff0a68172bc8794d2c37f088ba2539d173d
Signed-off-by: Pavan Kumar Chilamkurthi <pchilamk@codeaurora.org>
Signed-off-by: Mukund Madhusudan Atre <matre@codeaurora.org>
Use pr_info for camera warning and error logs to avoid sending
to console (assuming info logs are disabled to console).
All camera warning and error logs are anyway tagged with
CAM_WARN and CAM_ERR, so using pr_info doesn't cause any
information loss.
Change-Id: Ib23fbad47c1dce4c45e3413d775303d681a1ff86
Signed-off-by: Pavan Kumar Chilamkurthi <pchilamk@codeaurora.org>
Signed-off-by: Mukund Madhusudan Atre <matre@codeaurora.org>
Shutter notification must be sent when moving request
to free list if it was not sent out earlier due to
missed EPOCH IRQ or delayed EPOCH IRQ handling.
Change-Id: I9b3b039827bea24814fbea34e61abfc938f6bf2d
Signed-off-by: Venkat Chinta <vchinta@codeaurora.org>
Signed-off-by: Mukund Madhusudan Atre <matre@codeaurora.org>
Currently EPOCH IRQ handling is at a higher priority
compared to RUP IRQ as RUP is fired at bus level. If
RUP IRQ is not scheduled for handling by the time we
receive EPOCH IRQ, EPOCH IRQ will be processed first
and this will lead to missed SOF notification as the
active request list might be empty. This change sets
priority of both IRQs to the same by utilizing a new
IRQ controller that is tasked with handling RUP from
BUS. BUF_DONE is also subscribed to the same VFE top
level BUS_WR IRQ but with a lower priority. IRQs for
CAMIF Lite and RDI are subscribed to only if the ctx
is RDI only.
Change-Id: Id844ffe291e21ecfc7f7ed6fc53baf7e79dd2184
Signed-off-by: Venkat Chinta <vchinta@codeaurora.org>
Signed-off-by: Mukund Madhusudan Atre <matre@codeaurora.org>
Correct some Makefiles and drivers header inclusion.
Change-Id: Iec3e6e0333ae55e8f1cff9780723e0dad954ff83
Signed-off-by: Jigarkumar Zala <jzala@codeaurora.org>
Currently we can infer only the pd of the device whose request
was not available on time leading to a frame skip. This change
identifies and logs the device name to ease debugging.
Change-Id: I49a3cd84611b21626c68395b11f0ef52bffb62db
Signed-off-by: Karthik Anantha Ram <kartanan@codeaurora.org>
Signed-off-by: Mukund Madhusudan Atre <matre@codeaurora.org>
IPE/BPS frame process data keeps changing one needs to update the
kernel hfi header accordingly everytime. This change avoids
accessing those structs in the kernel. Userspace will ensure
resetting the struct to a default value.
Change-Id: If224befa89643f44997bb6e826f8dfcfac5d08d1
Signed-off-by: Karthik Anantha Ram <kartanan@codeaurora.org>
Signed-off-by: Mukund Madhusudan Atre <matre@codeaurora.org>
Certain register values are required by user space during flush
to apply settings accordingly. Also, support for dumping registers
at the time of error is needed for debugging. Add support for
dumping register values in a range of offsets to given cmd buffer.
Change-Id: I5912118809f7a7dd701a555639d1057ffe665ce1
Signed-off-by: Mukund Madhusudan Atre <matre@codeaurora.org>
For debugging, there are a set of register values that user
space needs. Based on the offset and range given, values can
be dumped into an out buffer to be further processed. Add
uapi support for this reg dump.
Change-Id: I6e6f89625a505158a6bf8932ebb9d0ae78bf0129
Signed-off-by: Mukund Madhusudan Atre <matre@codeaurora.org>
If bubble report is set from usersapce we move the active
request back to pending request list while handling error.
We need to iterate through pending request list as well
when dumping page fault info for erroneous request.
Change-Id: I2458313affbae6cb161f077eef7bdd0263c43ae2
Signed-off-by: Vishalsingh Hajeri <vhajeri@codeaurora.org>
Signed-off-by: Mukund Madhusudan Atre <matre@codeaurora.org>
This change add config support for LITO target.
Change-Id: Ia4a191c862f9886bb35fbd792ae786d027d5cc7e
Signed-off-by: Jigarkumar Zala <jzala@codeaurora.org>
