Add a wait for PM freeze when wifi is turning on to make sure file system
and QMI are still accessible before attempting to download the FW and
trigger a QMI handshake with FW.
Change-Id: Ia2f3dc28abb9cab4b5dd8038ea02ac016eb74bbb
CRs-Fixed: 2521009
Time stamp for profiling system level power issues is currently using
qdf_get_system_timestamp(), which measures in milliseconds. To get more
fine granular data, use qdf_get_log_timestamp_usecs() to measure in
microseconds instead.
Change-Id: I920d0ec7c90ab602cbdc0d1efdb6061d6a72c122
CRs-Fixed: 2520939
The spin lock APIs are accessed from wake MSI hard irq handler as well,
causing deadlock. To solve this, change spin lock APIs to use spin lock
IRQ.
CRs-Fixed: 2519986
Change-Id: I4d05abd294a71a26915210ae7e2be9be6aa7a996
Use QCS40X instead of QCS405 in config files. Kernel defconfig files for
QCS405 and QCS403 has been separated recently, and the arch has been
changed between these two chips. But all QCS related features and changes
in cld should all be included, so use CONFIG_ARCH_QCS40X to replace
CONFIG_ARCH_QCS405.
Change-Id: I6f0837bb3d3f1530aea5b2d4912741beb8c313bd
CRs-Fixed: 2519267
Return -EAGAIN from idle shutdown callback API if system suspend is
ongoing such that cnss driver does not turn off suspend the PCIe link
and psoc idle shutdown can be re-tried later.
Change-Id: If859abb70c18d03c2e73a8c589a4e138b98cb996
CRs-Fixed: 2518448
Add support to advertise the VHT MCS 10&11 support using vendor
specific IE to enable the MCS 10 and 11 support in VHT mode.
Change-Id: I2d197dcce20ab4aec617ca8a7f4a54b438fae635
CRs-Fixed: 2465662
In hdd_dis_connect_handler, roam_info is checked
for NULL in if(roam_info && roam_info->disconnect_ies),
but roam_info may be null pointer and is explicitly
dereferenced later. Add null pointer check before
it is dereferenced again.
Change-Id: I51f731323f01ddc657c57d20d8c63317400c92ab
CRs-Fixed: 2518450
FW sends regdb and bdf regdb version as a part of service ready event.
Extract the versions and populate it to HDD layer.
Change-Id: I2c9a40832361381c66a482d93ef5721fa7d6ffe4
CRs-Fixed: 2486984
In legacy code WLAN_LEGACY_WMA_ID reference was released after
sending vdev delete command to firmware. Now with converged vdev
manager, if wmi service "wmi_service_sync_delete_cmds" is not enabled
then vdev delete response is sent to upper layer through target_if.
Hence WLAN_LEGACY_WMA_ID reference for vdev is released before sending
vdev delete command and then wma_txrx_node for the vdev is cleaned up.
Change-Id: I717a7911a5139dc5145e7702e831f6f026c8f3aa
CRs-Fixed: 2518231
Send TDLS offchannel as 0 if only 2G is supported otherwise
FW will do the TDLS offchannel in 2G and will result in MCC
and not desired in 2G.
Change-Id: Ieeea619526a3d8b04ac4bda3f3e0ca73aba2f78a
CRs-Fixed: 2517642
There is possible excessive log in hdd_rx_packet_cbk when
receiving arp pkt. so lower log level from info to debug.
Change-Id: If7fbe1f86e98ca22172f9b21205b7215c435988b
CRs-Fixed: 2511832
cds_cfg is assigned the return value from function
cds_get_ini_config. cds_cfg may be null pointer. Add
null pointer check before cds_cfg is
dereferenced.
Change-Id: I184c0a589fa660c5c49cd951986ad918cbc42bcd
CRs-Fixed: 2518433
Add timing profiling log for runtime PM operations such that we can
know how much time each operation is taking.
Change-Id: Iad2aca8e8bb2f0dadc14d24e3a5c2b03938df9df
CRs-Fixed: 2518935
As a part of 802.11ax amendment, 6GHz band operation is added.
Since the 6 GHz channel numbers are overlapping with existing 2.4GHz
and 5GHz channel numbers, use frequency to identify unique channel
operation instead of channel number. Channel frequency is unique across
bands.
As a part of above requirement, in the existing WMI interface handlers
and related functions, wherever missing, add frequency attributes to
identify unique channel operation.
Change-Id: I3853d6e64e63eb219282afac4f56ccf398b0a04f
CRs-Fixed: 2517897
The TSF deviation is more than 100ns when the capture interval is 100sec.
Lower the interval to 1sec to keep the drift within limit of 100us.
Change-Id: I2a6f7bf2d06d5d67854cbab6b582009f2cec39bf
CRs-Fixed: 2515981
In function p2p_process_scan_complete_evt roc timer state is checked
using the api qdf_mc_timer_get_current_state, this api does not take
timer lock while returning the state. In other thread, if the timer
state is changed then the wrong timer state is returned in current thread.
And wrong timer state can lead to destroying roc timer without stopping
it synchronously.
Call qdf_timer_stop_sync api without checking the timer state
as the timer already checking the state by taking a timer lock.
Change-Id: Idb22e405178f2e0f1ed80b7c8aac04170e5b69bc
CRs-Fixed: 2511768
Check napi_gro_recevie result before do napi_gro_flush when bus
bandwidth is idle (<18 Mbps), only if napi_gro_recevie result is
not GRO_DROP and GRO_NORMAL then do napi_gro_flush for each RX packet.
Change-Id: I8cd75fb680ad4cb13f8d8677136f51c5a0548b6d
CRs-Fixed: 2515794
This reverts change-id Ie40db69a24dc1e0b86f140ca1aad91bd3b10e95e.
The reverted changes was causing regression, that optional
firmware not loadable even it exists.
Change-Id: I02a45e9be635e4ce0787f0a24480e42129c59874
CRs-Fixed: 2516015
Return number of msdus poped as return value for
htt_rx_frag_pop_hl to process fragmentation indication
correctly.
Change-Id: I104c04757aa8bfac5d6516b1455e1e0506b460a4
CRs-Fixed: 2419759
Currently the sap ctx's channel list is not freed
as part of undo acs, and hence can lead to mem leak
when the do acs and SSR is triggered in parallel.
Scenario:-
1. Turn on SAP
2. Do SSR in parallel
3. Unload WLAN
Fix is to clear the channel list as part of undo
acs.
Change-Id: Ie8dcace1d32aeec2621e785d793290d70c194f62
CRs-Fixed: 2511752
a. when T-put < 18Mbps, do GRO/GRO flush for each RX packet.
b. when T-put can kept stable (18Mbps ~ 60 Mbps) last >= 1 second ,
skip GRO flush logic.
Change-Id: Ic8075f10f72b479c6941d7ac12a71fd90f945094
CRs-Fixed: 2509672
Before sending vdev delete command to target_if layer, attach vdev
delete params to wma_txrx_node's del_staself_req member in wma layer.
This helps while responding to vdev delete command in case wmi service
"wmi_service_sync_delete_cmds" is disabled.
VDEV delete command response is sent to upper layer even vdev_mlme
object is not found.
Change-Id: Idfd8b036ff1ea676dd3ad8be703512ff84f299b7
CRs-Fixed: 2510460
