Introduced CVP skip flag as part of qbuf to indicate buffer is
skipped CVP processing. This is required in order to re-use CVP metadata
from previous frame when it is not an error case. Video firmware will look
at this flag and reuse CVP metadata from earlier frame to encode current frame.
Change-Id: Icf89daa2d5f19790a04f0467a15165870b283ee4
Signed-off-by: Akshata Sahukar <asahukar@codeaurora.org>
DCVS Min Threshold should be FW Min count. Switch to Load_Norm
only when buffers are equally distributed between FW and Client.
This reduces clock transitions and increases residency in
Load_Low and Load_High.
CRs-Fixed: 2502809
Change-Id: I4896fd8fdffb44b546c6df3321e0155ee4a18dcb
Signed-off-by: Chinmay Sawarkar <chinmays@codeaurora.org>
1. Client needs input etb to output fbd association. Introducing
input_tag and input_tag2 fields for this. Client will send
input_tag via etb reserved fields and client will get back
those as part of fbd reserved fields.
2. Convey sub-frame information to client from firmware.
CRs-Fixed: 2494945
Change-Id: Ic64131c7f8f3e3035cd6ff3997fe483171d71fc4
Signed-off-by: Govindaraj Rajagopal <grajagop@codeaurora.org>
1. Don't allow qbuf (etb & ftb), if flush is issued to
(encoder & decoder) input port.
2. Don't allow qbuf (etb & ftb), if flush is issued to encoder
output port
3. Don't qbuf (ftb), if flush is issued to decoder output port
4. Allow qbuf (etb), if flush is issued to decoder output port
to handle decoder reconfig.
Change-Id: I08a6a10612cc1a14ad164c55c5c8e54550c84845
Signed-off-by: Govindaraj Rajagopal <grajagop@codeaurora.org>
Set VBR as default rate control instead of RC_OFF.
Change-Id: Ie89f0109a9fe38a6c18b4713e8e8e905beb40b70
Signed-off-by: Mihir Ganu <mganu@codeaurora.org>
Fix two kw issues on uninitialized pointer
and possible NULL dereference.
Change-Id: Ic87335d435ee84bef1c264d99e0d857d2932cbdc
Signed-off-by: Shi Zhongbo <zhongbos@codeaurora.org>
Encoder buffer requirement changes based on frame rate or
operating rate (HFR/HSR usecase) and hence recalculate
buffer counts when client set frame rate or operating rate.
Change-Id: I7b421524f319a4fde8b153dcd5c3bde123c5ccf9
Signed-off-by: Maheshwar Ajja <majja@codeaurora.org>
If kernel to kernel CVP is enabled, initially driver disables
CVP extradata to firmware and then later, re-enables it.
Introduced a new flag to usage of CVP kernel to kernel metadata
to save the usage. As part of start streaming, driver will send
out CVP extradata enabled once based on overall usage.
Also, disabled kernel to kernel CVP usage for superframe.
Change-Id: I5590bd2274e27243da99f207d61fb00fc6fc82e0
Signed-off-by: Akshata Sahukar <asahukar@codeaurora.org>
Increase input buffers count for first four elgible
sessions to avoid high memory usage. Also made changes
to extra buffer calculations.
Change-Id: Id50791f6800390ad27abc6f361e54dcc7b61a8c8
Signed-off-by: Darshana Patil <darshana@codeaurora.org>
By default, a session is realtime. Client can
overwrite as non-realtime.Fixed realtime value
for decoder.Deprecated VIDC_REALTIME flag usage.
Change-Id: I5a1d1c9bdab18d3dfb73f3b21a23054de07d77a1
Signed-off-by: Darshana Patil <darshana@codeaurora.org>
Parameter that affect BW change during ETB and EBD.
During FTB BW calculation and voting is redundant.
Change-Id: I418d422f614670c2543a19709b36b3f39fd0d0e1
Signed-off-by: Chinmay Sawarkar <chinmays@codeaurora.org>
If requested clk_freq is not changed, don't call
clk driver to the same value repeatedly.
Change-Id: I7ff1d7faedb10b06c0371f66b4a6cf6592d165fe
Signed-off-by: Qiwei Liu <qiweil@codeaurora.org>
Input and output buffer size must be 4K aligned for both
encoder and decoder session. So reject the session during
msm_vidc_qbuf, if alloc_len is not 4K aligned.
Change-Id: If555f26f1658ce50e12a8533cb9d59134da0aa81
Signed-off-by: Govindaraj Rajagopal <grajagop@codeaurora.org>
Reverting the volatile flag added to GOP size, bframe
and max hier layer controls.
Change-Id: I3f74bc59e7a73882ff1ce95832b8f248a8ddb80e
Signed-off-by: Darshana Patil <darshana@codeaurora.org>
Do a get control before accessing the control value
to make sure right structure is accessed.
Change-Id: Iabf2ca85c342fe46d2236232794bbe9b9981fb18
Signed-off-by: Darshana Patil <darshana@codeaurora.org>
Set LTR use mask and mark index information to
firmware only when LTR count is non zero.
Change-Id: Icdcd0e8e29841e0cf4d2222ad3c2331aed2e3968
Signed-off-by: Darshana Patil <darshana@codeaurora.org>
Due to various feature constraint and best effort encode/decode, driver needs to update client
updated or default control value.Later these driver updated values are used in programming video
firmware. Hence, we need various controls as volatile
Change-Id: Ied22665addda921b0ef4827fb7a2b1fd47be5bbb
Signed-off-by: Darshana Patil <darshana@codeaurora.org>
For heic/hevc image session, check respective capabilities to
allow or reject.
Change-Id: I4e565e6614a7863f75ecd4719480b850e1af43ae
Signed-off-by: Amit Shekhar <ashekhar@codeaurora.org>
Update all struct values in default_bus_vote.
Calculate bw only when function available.
CRs-Fixed: 2494775
Change-Id: I70a137494c4469f928efe3ddf1f0297e2281c689
Signed-off-by: Chinmay Sawarkar <chinmays@codeaurora.org>
1. Add all intra encoding capability;
2. Disable LTR, HP, Slice mode and IR settings;
3. Use WorkMode2, HQ and Pipeline 4 by force;
4. Ignore dynamic switch between IPPP and all intra;
5. Reject sessions if static/dynamic frame rate
larger than 240;
6. Reject any non HEVC or AVC sessions;
7. Reject any HEVC Main10 profile sessions;
8. Reset all intra flag to false when stream off;
Change-Id: I9f405a7712c84bc6f8319025a7fb2a0a7f9064df
Signed-off-by: Shi Zhongbo <zhongbos@codeaurora.org>
Send dmabuf pointer in reserved fields instead of fd
to CVP driver for internal CVP usage buffers as fd is
not available for these buffers.
Change-Id: Ic25a445253b4ae05748d47b7caf0b88e909aad7e
Signed-off-by: Maheshwar Ajja <majja@codeaurora.org>
- Modify max UBWC_CR from 3 to 5, as this value can
exceed 4 in real usecases.
- Decoder dpb read/write has already added cbcr by
dpb_factor, no need to add again.
- Decoder dpb_read BW saving factor for LLC should
be 1.3 for H264 and 1.14 for HEVC.
- VSP base cycle should be 0 for Iris/Iris2.
- Encoder ref_read_cbcr should multiply by
ref_cbcr_read_bw_factor.
- Encoder ref_write should multiply by
recon_write_bw_factor when tile enabled.
- Add fw_vpp_cycles when calculating vpp_cycles.
- Add multi-pipe factor for vpp_cycles.
- Add B-frame factor for encoder vpp_cycles.
Change-Id: I9e40203c5c89d8abdc77787a752ca240e11791f6
Signed-off-by: Qiwei Liu <qiweil@codeaurora.org>
Remove HAL_BUFFERFLAG_SYNCFRAME flag usage support
from hfi_msg_session_empty_buffer_done_packet and
its corresponding usage in handle_ebd.
Change-Id: I2dafd35a462a443e6efa165cbf46d4b78833c765
Signed-off-by: Priyanka Gujjula <pgujjula@codeaurora.org>
Encoder shall encode subsequent frames in encoding order subject to the
following constraints:
- It shall not use short-term reference frames in display/input
order older than the current frame with the LTR command applied
for future encoding in encoding order.
- It shall not use LTR frames not described by the most recent USELTRFRAME.
- It may use LTR frames updated after the current frame in encoding order.
Change-Id: I167bb0e211c46f892fedb88f8054bc98543ebe8a
Signed-off-by: Akshata Sahukar <asahukar@codeaurora.org>
