Set ipa_disable flag in the target_resource_config,
which is decided by target Genoa need to support IPA
or not.
Change-Id: I1a66c83ea36d5402880ce62d66ea3e633049479a
CRs-Fixed: 2594726
Enable p2p go gc force scc by adding logic to check the connected
p2p gc when checking concurrent channel interfering and restart p2p
go if needed.
Change-Id: Idd01fbc2a358b463568844a420e1132355c1de4e
CRs-Fixed: 2604955
For SAP, IBSS, and NaN mode, the PCIe link down should be prevented
when first remote peer joins the network to avoid any throughput
latencies.
Change-Id: Iabea78b3a4916cce7e63eadce2e1ce2874cf2c88
CRs-Fixed: 2605563
Compile pktlog file based on legacy or future
chipsets as this would give us significant
code memory savings.
Change-Id: I394a9672fd84db691eef873cfd20eb1724e26073
CRs-Fixed: 2585626
To close NAN data interface session, BSS stop request is sent to
firmware, as a response driver gets status and reason code for BSS
stop. To update NDI close session to user space, required information
is available in BSS stop response.
Hence, update NDI close indication to user space from ndi delete
response handler in HDD layer.
Change-Id: I2440cb6d15bd393ed9631d595634865fbee8bdd6
CRs-Fixed: 2600852
CPU PM QOS votes can be used as a precondition to decide whether
WLAN device is worth to enter runtime PM suspend. Add support to
monitor PM QOS votes while WLAN device is powered on and enable
this feature if gRuntimePM config value is set as 2.
Change-Id: I7f47a50689efdcb15979e7983474bb23b86da00d
CRs-fixed: 2604780
This reverts commit I1adb8ead32a0d45a34f72590c33309b17d6c80c0.
Nan offload supported is now supported.
Change-Id: Ic99aa886c82dcf4d9c68f658080bd800117cce87
CRs-Fixed: 2600602
When all chan in ACS freq list is filtered out
by wlan_hdd_trim_acs_channel_list, the hostapd start will
fail. This happens when PCL is PM_24G_SCC_CH_SBS_CH,
and SAP acs range includes 5G channel list.
One example is STA active on 6Ghz chan. Hostapd start
SAP on 5G ACS range. The intersection of PCL and ACS range
is zero.
Instead of ACS failure, add API wlan_hdd_handel_zero_acs_list
to select one channel from ACS range and report to Hostapd.
When hostapd "start_ap", the driver will force SCC to 6G
or move SAP to 2G based on SAP's configuration.
Change-Id: Ice8bef2a82f43940c570c74c0af8b05d18159f52
CRs-Fixed: 2603699
Unify wow handling for SAP, IBSS and NaN mode such that both DRV
and non DRV cases are handled in same way for SAP, IBSS and NaN modes.
Change-Id: I04c7a6488285511f34ef3a5c2288937dc74b6b73
CRs-Fixed: 2603912
6Ghz channels information is not used by legacy OEM apps example
"lowi-server" having no support for 6Ghz channels.
Hence "oem_6g_support_disable" INI is added. By default INI value is
1. 6Ghz supported OEM applications sets INI value to 0 and gets 6Ghz
channel information from driver.
Change-Id: I2650e6ad2976b64e46ab0143b2bafc2df2343e94
CRs-Fixed: 2597651
Today we enqueue nbuf list to rx_thread via nbuf frags_list.
If deliver_head happens to have frags_list then it is delivered alone.
Remaining list of skbs are delivered using frags_list of next skb.
It does not takecare to update QDF_NBUF_CB_RX_NUM_ELEMENTS_IN_LIST of
the new head_skb with remaining num skbs, make sure to update it.
Also add nbuf_queued to take care of this accounting.
Change-Id: I5557b5c56576c46fc8564a87a27d167b8785bb95
CRs-Fixed: 2559875
Replace channel ID with channel frequency in
wlan_hdd_change_hw_mode_for_given_chnl.
Change-Id: If1583dae2f13c5e5553d916befb186de00840345
CRs-Fixed: 2584776
Extend WAR mechanism to record monitor mode capture frequency from
pdev if RX PPDU TLV is empty.
Change freq type to qdf_freq_t.
iw dev wlan0 set freq <freq> [HT20|HT40+|HT40-]
Change-Id: Ic66f516f1f0f2ac97563e27b1d7c86032e8690ec
CRs-Fixed: 2568971
Set he_6ghz_band flag when SAP is switching to 6Ghz band.
And clear the flag when switching to non-6ghz band.
The Driver will add the 6ghz op info in HE operation IE
in beacon frame if he_6ghz_band is set.
Change-Id: I281a9bb239c5fea693e640a8ecddf4ffc14ba7d8
CRs-Fixed: 2602152
If SAP start on 5G DFS channel, it will keep in CAC for 1 minute.
If Disable 5G by cmd: hostapd_cli -iwlan2 set setband 2G during
this minute, SAP won't switch to 2G since SAP isn't in started
state, and SAP start also fail since SAP operate channel
becomes disabled instead of DFS state, SAP will be hung in DFS
state.
Fix: When CAC complete and SAP start, check SAP operate channel
with wlan_reg_chan_has_dfs_attribute_for_freq.
After SAP started, will check for SAP restart,
if found current band is disabled, will switch to 2G band.
Change-Id: I3c29b5d324d4324ce958a5c2cd2102df2cc183ff
CRs-Fixed: 2601081
In wlan_mlme_configure_chain_mask(),mlme_legacy_err is
updated to mlme_legacy_debug,as its not an error condition.
Change-Id: Ibdf33124ee970bcfcc9d57df9f3b3fc6990072fe
CRs-Fixed: 2599510
When CONFIG_BAND_6GHZ and CFG80211_6GHZ_BAND_SUPPORTED are defined in
kernel 4.4, which means 6g feature is enabled, currently there is a
build error: wlan_hdd_iftype_data_alloc_6ghz is defined but not used.
To fix this issue, refine iftype_data_*g defination with below rules.
1. If CONFIG_BAND_6GHZ and CFG80211_6GHZ_BAND_SUPPORTED are defined,
iftype_data_2g, iftype_data_5g and iftype_data_6g will be defined no
matter the kernel version.
2. If the kernel version is not smaller than 4.19, iftype_data_2g and
iftype_data_5g will be defined.
3. If the kernel version is not smaller than 5.4 and CONFIG_BAND_6GHZ
is defined, iftype_data_6g will be defined.
Change-Id: If75bea9fc4c11d6cacd8dbf49455277f055ed8de
CRs-Fixed: 2600962
When CONFIG_WLAN_FEATURE_11W is disabled, compilation of lahaina still fails
in a few areas. Even though CONFIG_WLAN_FEATURE_11W should be always be
enabled now, add appropriate fixes for the compilation issues in the event
that CONFIG_WLAN_FEATURE_11W is disabled.
Change-Id: I1743678df6b66a63160795374de7969f313f55d9
CRs-Fixed: 2601362
Sometimes wlan FW fails to return wmi_radio_link_stats_link because of
buffer, which makes timeout happen in wlan_hdd_cfg80211_ll_stats_get.
To fix this issue, FW returns wmi_radio_link_stats_link with dummy
information, and host need handle dummy wmi_radio_link_stats_link wmi
event.
Change-Id: Ibafc7f19ffc6d182601001f28dd7e85654155d02
CRs-Fixed: 2599725
Modify the max tx power value from 30db to 24db
to pass certification test cases.
Change-Id: Idf9c3ca10d3216f0f4b1cf78f87586c6bd3c2c39
CRs-Fixed: 2601405
DUT as SAP and disabled LDPC, but peer supported LDPC and DUT still
TX data packages by LDPC coding. This behavior is different to other
vendors. This change disable LDPC capability of peer when associating.
Change-Id: If90944ca359c7164d4acecfe1d6146e3d2b30b5d
CRs-Fixed: 2599860
