Add support to send ADDBA request with user configured buffer
size and tid and ADDBA response with user configured buffer
size.
Change-Id: I2a1dfedadeb68a1cfca9a6eba8e7775d0bb51d1a
CRs-Fixed: 2193872
If wlan_hdd_mgmt_tx is called while unload in progress, it is possible
ROC scan can't be canceled, cds_ssr_protect already prevent
wlan_hdd_mgmt_tx running before unloading, we must also prevent it
running after it.
Change-Id: Ic8d981c9be2a2b33079c4e3c9a18a4d8bce48956
CRs-Fixed: 2202026
Add compilation flag to compile out HTC credit History
feature cleanly from the cld-3.2 driver binary.
Change-Id: I5f5e73e430d282c99d3077fb82ed1cb8eb79715a
CRs-Fixed: 2190545
Change "qcacld-3.0: Use Request Manager for ioctl getWlanStats"
removed the only user of item hdd_qdf_event in struct hdd_wext_state,
so completely remove it.
Change-Id: Ifc00f6dc396ca5f6e59b3895a6c9467179073218
CRs-Fixed: 2202506
Currently the handling of private ioctl getWlanStats uses a legacy
mechanism for coordinating the request with the response. Change this
to use the HDD Request Manager.
Change-Id: I7e8333cf8d2e651e04509e3370c30d8a6425bdca
CRs-Fixed: 2202504
Function hdd_statistics_cb() is registered as a callback function by
__iw_get_statistics() when calling sme_get_statistics(). Since
hdd_statistics_cb() and __iw_get_statistics() are tightly coupled it
makes sense for them to be co-located, but currently they are
not. Therefore relocate hdd_statistics_cb() to be adjacent to
__iw_get_statistics(). Note that this is a precursor to further
cleanup of this pair of functions.
Change-Id: Ie36d107d9ef2e541444c5fb9d7bfba7e9e82c1e6
CRs-Fixed: 2201907
The parameters to function hdd_roam_register_tdlssta() currently
includes ucastSig. This "signature" parameter dates back to a previous
version of the driver that used signatures to synchronize the data
plane with the control plane. However the current version of the
driver does not use this parameter, so remove it as part of the plan
to completely remove these signatures from throughout the driver.
Change-Id: Iee51d79e58501e3e8312c6c7a21b98c1ae6bf268
CRs-Fixed: 2200886
The parameters to function hdd_softap_register_sta() currently include
ucastSig and bcastSig. These "signature" parameters date back to a
previous version of the driver that used these signatures to
synchronize the data plane with the control plane. However the current
version of the driver does not use these parameters, so remove them as
part of the plan to completely remove these signatures from throughout
the driver.
Change-Id: I1f1f1fb1ef553d36ba0f4902ab29b2b4852ae5ca
CRs-Fixed: 2200356
Add support for HW mode info vendor command which sends
mac id, band, interface id and frequency information for
each MAC provided by driver to userspace.
Change-Id: If1112d29b8781cf5ba0480c84feeb772142f2c0e
CRs-Fixed: 2160531
In IPA offload case, if wlan driver is loaded before IPA uC is ready,
error is returned in hdd_ipa_init, which leads to whole driver load
failure. This is not the case since IPA driver provides wlan driver
a notify callback where IPA will invoke this callback when IPA uC
is ready.
Fix is to not return error if IPA uC is not ready during wlan loading
phase.
Change-Id: I98382abbb3bb3b1176f3be41228ac260c1017c24
CRs-Fixed: 2198998
In wlan_hdd_add_age_ie the mgmt->u.probe_resp.variable is type casted
to qcom_ie_age, before incrementing the mgmt->u.probe_resp.variable
to get the qcom_ie_age pointer. This leads to memory corruption.
Fixed by typecasting the pointer once the qcom_ie_age pointer is
derived by incrementing the offset of qcom_ie_age from
mgmt->u.probe_resp.variable.
Change-Id: Iafcdb5c17f0d9c234687ddcc6f8b9100b21cc957
CRs-Fixed: 2201303
Duplicate API's are present in HDD and common code to inform the
beacon to kernel. This change removes the duplicate API from HDD
and use common API to inform beacon.
Change-Id: I1916ebd6d3c153f47533cde6a1e2e78ebaae55dc
CRs-Fixed: 2199760
Recent changes in Power Management and Offload (PMO) have removed the
need for a configurable maximum number of WoW filters. Remove the
following relevant fields:
* maxWoWFilters
* CFG_MAX_WOW_FILTERS_MAX
* WMA_STA_WOW_DEFAULT_PTRN_MAX
* max_wow_filters
* ol_ini_info
Change-Id: I99cc74731d6373258dc65473a8342bda0ab2786b
CRs-Fixed: 2199452
There are scenario where indoor channel operations
(like active / passive scan/connect/roam etc)
are not desired / permitted specially in sap case.
Hence add support of disabling indoor channel
on sap start and revert it on sap stop.
Change-Id: Id6e01534532e3076a3e662e6a4f71e8be924165a
CRs-fixed: 2121103
In order to conserve firmware memory when various filtering features are
not in use, update the target configuration provided to firmware based
on the intersection of various filtering features and host
configuration.
Part 1
num_wow_filters = ARP/NS offload enabled ? 2 : 5
bpf_instruction_size - BPF enabled ? 0 (auto) : 0xffffffff
Part 2 (pending firmware support)
pkt_filter_num = Packet Filter enabled ? 12 : 0 (disabled)
Change-Id: Ic6624ff04598b53d8321e4864618b12b9702780f
CRs-Fixed: 2196997
This reverts commit I87b635bf4644b54d47bee65307d7484c9e328885.
This should be used for uC loading debug purpose only.
If uC is not loaded yet when WLAN initialization, we are expecting
the registered uC ready callback is invoked after uC loaded later.
Change-Id: Ie6f6d116ff7a23a9b4900c60053a8e76948734d9
CRs-Fixed: 2196878
Hostapd sends channel list as NULL in do_acs request
when country mode is set to world and hw mode is 11a.
This results in scan to be triggered on all 5g channels
and driver to choose 5g channel as best channel.
Fix is to return error to hostapd if channel list
received is NULL.
Change-Id: I17aacfdbeea9803023a66f54de7b596612ea97c3
CRs-Fixed: 2192858
In the present scenario the function wlan_cfg80211_cleanup_scan_queue
does the code scan queue cleanup during radio detach, leading to access of
freed vdev netdev.
Extend cfg80211 scan cleanup API to support netdev level cleanup. The
second parameter if NULL cleans up all the queues or only the queue of
the specific net dev given.
Change-Id: I2a6b350fe5102b2a5d772dd9a075003ccf3b684c
CRs-Fixed: 2197309
The checkpatch script has identified instances of "Missing a blank
line after declarations" in HDD, so add them.
Change-Id: I289072b26e0c9c1f8392616438e304b018d9ecd2
CRs-Fixed: 2198555
Currently hdd_roam_deregister_sta() tests the STA to see if it is in
the eConnectionState_IbssDisconnected state, but then doesn't actually
do anything if it is true. Since this is obviously an obsolete test
where the action code has been previously removed, now remove the
actual test.
Change-Id: I6a0077088d87f91b8d8f220049de05a19232995b
CRs-Fixed: 2198554
WoW is always enabled on ROME and ADRASTEA platforms and wow
wake up pattern configuration is dynamic based on vdev type.
All wow wake up patterns are configured at the time of vdev
creation. HDD and SME has obsolete wow enter and exit logic
and hence nuke it.
Change-Id: I228ff5b77a7f9dac579448ada4ebee591d5a0c38
CRs-Fixed: 2198644
Current driver posts the high and low Tx TPUT indications to cnss-daemon to
tune the tcp_limit_output_byte system parameter. Add option to disable it.
Change-Id: Ic65fe0bd762024425cabf2f1f07123211dce5dce
CRs-Fixed: 2197112
ICM does not support hw_mode=any at present. When hw_mode is
set to any in hostapd.conf, HOST driver choose one band out of
2.4Ghz and 5Ghz based on "acs_freq_band" ini item and update the
ACS and PCL channel list accordingly. But currently driver does
not send updated band to ICM and so ICM still gets BAND_ALL from
HOST driver which is INVALID for ICM module. As a result ICM
algorithm does not run and channel selection fails.
Send Updated band to ICM and also update channel width accordingly
for 2.4Ghz band as it does not support 80/160/80PLUS80 Mhz.
Change-Id: I13593a3c59c204d1ff7677e67d96d039c9456568
CRs-Fixed: 2196247
The checkpatch script has identified an instance of a non-conformant
block comment in wlan_hdd_main.h, so fix it.
Change-Id: Ie76156601021e2b5e503280337b38792217b7dbc
CRs-Fixed: 2197711
The checkpatch script has identified instances of "else after return"
that is not conformant with the Linux coding style, so fix them.
Change-Id: Ica4ccb1ef1c865089851e928ddeaa27ea54bcb4a
CRs-Fixed: 2197681
The checkpatch script has identified multiple instances of non-conformant
indentation in HDD, so fix them.
Change-Id: Icb28911e54324198d50018fcaf6d6662c9dc161c
CRs-Fixed: 2197006
The checkpatch script has identified two instances of non-conformant
brace placement in HDD, so fix them.
Change-Id: I0c8bbf2258b24c4876c6a8749633b90873980e95
CRs-Fixed: 2196976
The qdf_str APIs have recently been moved from qdf_mem. Reference the
new qdf_str.h header file where appropriate.
Change-Id: I2be5fa3f511fd6d67b4217243f4b3498321e0a9f
CRs-Fixed: 2196120
Adds logic in frame parser to use default RSN IE fields if optional
fields are not present in IE. So if RSN IE doesn't contain AKM,
group and unicast cipher use the default AKM(AKM_IEEE8021X) and
cipher (CCMP). Also adds sanity checks for RSNE in the frame parser.
Change-Id: I120a29c21407f82aab2c6fcdcaf1095518cb71b5
CRs-Fixed: 2195951
Currently when the MAC address is changed dynamically, invalid MAC
(Broadcast, Multicast and 00:00:00:00:00:00) are getting accepted
and interface is getting up on these invalid addresses because
of this device is trying to connect to AP with the configured
invalid address.
To address this issue reject all invalid MAC addresses
when MAC is dynamically getting configured.
Change-Id: If2530b213b5ffc2ddf0bc728138e1f3200f33286
CRs-Fixed: 2190468
When stop_bss from HDD is received when a SAP channel change request
is currently in progress and channel change response is not yet
received from the FW, the stop_bss would clear the SAP session and
when channel change response is received, we try to start BSS again.
The CSR roam state is also set to JOINING in this case.
As part of start BSS, we queue set key command to SME active command
list. Since the session has been cleared, eWNI_SME_SETCONTEXT_RSP
sent to lim would not be processed in CSR state JOINING leading to set
key command stuck in the active command list.
Do not restart BSS after channel change response if stop BSS is in
progress. Also handle eWNI_SME_SETCONTEXT_RSP and clear the command
queue in CSR Joining state.
Change-Id: I8dbab054746d26cc92fc2274d35ce76a694035fe
CRs-Fixed: 2193505
In testbed STA mode the RSNE may not match with APUT and thus
driver fails to filter AP from scan cache as PMF capability
mismatch.
With this change driver will ignore PMF capability check and
proceed with connection to send auth and assoc to APUT.
Change-Id: I1bf5947fb08574941eaf1845ec1e36ee9b030dd0
CRs-Fixed: 2195354
Set hw mode to DBS or single MAC for STA+STA and STA+P2P
concurrencies based on channel_select_logic_conc ini.
Change-Id: I46ba4d5cd8f5cda71d0c00be2b612bc851eb5ba4
CRs-Fixed: 2185554
Add ini to select DBS or inter-band MCC channel selection logic
for STA+STA and STA+P2P connections.
Change-Id: I7cfde9592ec210b0a8c812171d2bc6f005e17fb2
CRs-Fixed: 2185552
In __wlan_hdd_cfg80211_do_acs(), driver allocates memory for
ACS channel list without checking if there is already some
memory allocated for channel list or not. When SSR is triggered
before ACS completion, ACS list does not get freed and after
driver reinit, when a new do ACS comes, it allocates a new memory
without deallocating the older memory. This causes memory leak.
Free ACS channel list if already allocated before allocate a new
list.
Change-Id: Ic001c3daac518e97644da00cb82ea1d3fde4b539
CRs-Fixed: 2191839
Change to collect arp packet stats along with
existing hdd stats to debug arp packet related
issues.
Change-Id: Idce70799bd3698dc8a8ecd8cfc8ef7d9bf1f5764
CRs-Fixed: 2019787
qcacld-2.0 to qcacld-3.0 propagation.
Validate the avoid frequency channel list of
QCA_NL80211_VENDOR_SUBCMD_AVOID_FREQUENCY command and update the
driver's unsafe channel list with the channels received in the command.
Change-Id: I1a10e668bf6fe6dbb22f7f2f8aef929fc6e7fc65
CRs-Fixed: 2187477
The Android Packet Filter (APF) is the preferred method for filtering
packets, but the legacy Packet Filter may also be used. In order to
encourage the use of APF over Packet Filter, disable Packet Filter by
default. Customers may still enable Packet Filter via setting
gDisablePacketFilter=0 via ini configuration.
Change-Id: I581a4001167571efbc7c1c1738c5585e4bde0611
CRs-Fixed: 2195111
If force SCC is enabled and there is a STA connection, trim the
ACS channel list on the band on which STA connection is present.
Change-Id: Ibd580a7afdcdfc5fb4398ada547565e229d59c70
CRs-Fixed: 2191792
After successful connection, if interface down(STA) happens on DUT
and if AP changes data rates before interface up happens, there
is a possibility of STA to send packets at older data rates, because
of holding older scan results in SME scan cache. This results in using
stale scan result even after wifi turn off and on. If stale scan result
is used and if AP has updated some params like rates DUT will not be
using those supported rates for tx which is an issue.
To mitigate this issue, flush scan results on STA interface down.
Also, make sure there are no other STA interfaces before flushing
scan results.
Change-Id: I3505c128276fa8e5e05ea5d9110eb75275a746e9
CRs-Fixed: 2171523
