Commit Graph

144926 Commits

Author SHA1 Message Date
Jason Wessel
364b5b7b1d sysrq, intel_fb: fix sysrq g collision
Commit 79e539453b introduced a
regression where you cannot use sysrq 'g' to enter kgdb.  The solution
is to move the intel fb sysrq over to V for video instead of G for
graphics.  The SMP VOYAGER code to register for the sysrq-v is not
anywhere to be found in the mainline kernel, so the comments in the
code were cleaned up as well.

This patch also cleans up the sysrq definitions for kgdb to make it
generic for the kernel debugger, such that the sysrq 'g' can be used
in the future to enter a gdbstub or another kernel debugger.

Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Acked-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2009-05-15 07:56:24 -05:00
Linus Torvalds
45d447406a Merge git://git.kernel.org/pub/scm/linux/kernel/git/czankel/xtensa-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/czankel/xtensa-2.6:
  xtensa: Fix linker script to include .literal sections
  xtensa: update s6105_defconfig for ccount calibration
  xtensa: implement ccount calibration for s6000
  xtensa: fix wrong extern declaration renamed in code using it
  xtensa: register gpio chip before use
  xtensa: always use correct stack pointer for stack traces
  xtensa: Fix checksum header file
  xtensa: Fix architecture specific Kconfig
2009-05-13 17:07:28 -07:00
Linus Torvalds
210af919c9 Merge git://git.kernel.org/pub/scm/linux/kernel/git/pkl/squashfs-linus
* git://git.kernel.org/pub/scm/linux/kernel/git/pkl/squashfs-linus:
  Squashfs: cody tidying, remove commented out line in Makefile
  Squashfs: check page size is not larger than the filesystem block size
  Squashfs: fix breakage when page size > metadata block size
2009-05-13 16:33:25 -07:00
Linus Torvalds
a6aeeebf51 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse:
  fuse: destroy bdi on error
2009-05-13 16:32:57 -07:00
Linus Torvalds
f6cab83d77 Merge branch 'kvm-updates/2.6.30' of git://git.kernel.org/pub/scm/virt/kvm/kvm
* 'kvm-updates/2.6.30' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  KVM: SVM: Remove port 80 passthrough
  KVM: Make EFER reads safe when EFER does not exist
  KVM: Fix NX support reporting
  KVM: SVM: Fix cross vendor migration issue with unusable bit
2009-05-13 16:32:30 -07:00
Linus Torvalds
014049a1c7 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ryusuke/nilfs2
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ryusuke/nilfs2:
  nilfs2: check size of array structured data exchanged via ioctls
  nilfs2: fix lock order reversal in nilfs_clean_segments ioctl
  nilfs2: fix possible circular locking for get information ioctls
  nilfs2: ensure to clear dirty state when deleting metadata file block
  nilfs2: fix circular locking dependency of writer mutex
  nilfs2: fix possible recovery failure due to block creation without writer
2009-05-13 16:32:16 -07:00
Linus Torvalds
c98861f7de Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband:
  IB/mlx4: Don't overwrite fast registration page list when posting work request
  RDMA/cxgb3: Don't complete flushed send work requests twice
2009-05-13 16:31:12 -07:00
Linus Torvalds
0a40a55fd1 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/drm-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/drm-2.6:
  drm/i915: automatically select FRAMEBUFFER_CONSOLE if !EMBEDDED
2009-05-13 16:30:43 -07:00
Roland Dreier
8be741b0ac Merge branches 'cxgb3' and 'mlx4' into for-linus 2009-05-13 15:16:17 -07:00
Linus Torvalds
0f18132828 Revert "Ignore madvise(MADV_WILLNEED) for hugetlbfs-backed regions"
This reverts commit a425a638c8.

Now that the previous commit removed the "readpage" actor for hugetlb
files, read-ahead will no longer mess up the mapping, and there's no
longer any reason to treat hugetlbfs mappings specially.

Tested-and-acked-by: Mel Gorman <mel@csn.ul.ie>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-05-13 08:29:12 -07:00
Mel Gorman
f2deae9d4e Remove implementation of readpage from the hugetlbfs_aops
The core VM assumes the page size used by the address_space in
inode->i_mapping is PAGE_SIZE but hugetlbfs breaks this assumption by
inserting pages into the page cache at offsets the core VM considers
unexpected.

This would not be a problem except that hugetlbfs also provide a
->readpage implementation.  As it exists, the core VM can assume the
base page size is being used, allocate pages on behalf of the
filesystem, insert them into the page cache and call ->readpage to
populate them.  These pages are the wrong size and at the wrong offset
for hugetlbfs causing confusion.

This patch deletes the ->readpage implementation for hugetlbfs on the
grounds the core VM should not be allocating and populating pages on
behalf of hugetlbfs.  There should be no existing users of the
->readpage implementation so it should not cause a regression.

Signed-off-by: Mel Gorman <mel@csn.ul.ie>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-05-13 08:04:45 -07:00
Phillip Lougher
e5d287539d Squashfs: cody tidying, remove commented out line in Makefile
Signed-off-by: Phillip Lougher <phillip@lougher.demon.co.uk>
2009-05-13 03:25:20 +01:00
Phillip Lougher
fffb47b80e Squashfs: check page size is not larger than the filesystem block size
Normally the block size (by default 128K) will be larger than the
page size, unless a non-standard block size has been specified in
Mksquashfs, and the page size is larger than 4K.

Signed-off-by: Phillip Lougher <phillip@lougher.demon.co.uk>
2009-05-13 02:59:26 +01:00
Doug Chapman
a37b06d589 Squashfs: fix breakage when page size > metadata block size
Squashfs is broken on any system where the page size is larger than
the metadata size (8192).  This is easily fixed by ensuring cache->pages
is always > 0.

[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Doug Chapman <doug.chapman@hp.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Phillip Lougher <phillip@lougher.demon.co.uk>
2009-05-13 02:56:39 +01:00
Linus Torvalds
a4f1cb9f3c Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid:
  HID: add NOGET quirk for devices from CH Products
  HID: fix dropped device-specific quirks
2009-05-12 17:12:54 -07:00
Linus Torvalds
bd99f5e17b Merge branch 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/djbw/async_tx
* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/djbw/async_tx:
  dma: fix ipu_idmac.c to not discard the last queued buffer
  ioatdma: fix "ioatdma frees DMA memory with wrong function"
  ipu_idmac: Use disable_irq_nosync() from within irq handlers.
  dmatest: fix max channels handling
2009-05-12 17:12:36 -07:00
Linus Torvalds
2ea3f86848 Merge branch 'for-2.6.30' of git://linux-nfs.org/~bfields/linux
* 'for-2.6.30' of git://linux-nfs.org/~bfields/linux:
  nfsd: silence lockdep warning
  lockd: fix list corruption on lockd restart
  nfsd4: check for negative dentry before use in nfsv4 readdir
  nfsd41: slots are freed with session
  svcrdma: clean up error paths.
  svcrdma: Fix dma map direction for rdma read targets
2009-05-12 17:11:56 -07:00
Guennadi Liakhovetski
ad567ffb32 dma: fix ipu_idmac.c to not discard the last queued buffer
This also fixes the case of a single queued buffer, for example, when taking a
single frame snapshot with the mx3_camera driver.

Reported-by: Agustin Ferrin Pozuelo <gatoguan-os@yahoo.com>
Tested-by: Agustin Ferrin Pozuelo <gatoguan-os@yahoo.com>
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2009-05-12 14:41:48 -07:00
Maciej Sosnowski
4f005dbe55 ioatdma: fix "ioatdma frees DMA memory with wrong function"
as reported by Alexander Beregalov <a.beregalov@gmail.com>

ioatdma 0000:00:08.0: DMA-API: device driver frees DMA memory with
wrong function [device address=0x000000007f76f800] [size=2000 bytes]
[map
ped as single] [unmapped as page]

The ioatdma driver was unmapping all regions
(either allocated as page or single) using unmap_page.
This patch lets dma driver recognize if unmap_single or unmap_page should be used.
It introduces two new dma control flags:
DMA_COMPL_SRC_UNMAP_SINGLE and DMA_COMPL_DEST_UNMAP_SINGLE.
They should be set to indicate dma driver to do dma-unmapping as single
(first one for the source, tha latter for the destination).
If respective flag is not set, the driver assumes dma-unmapping as page.

Signed-off-by: Maciej Sosnowski <maciej.sosnowski@intel.com>
Reported-by: Alexander Beregalov <a.beregalov@gmail.com>
Tested-by: Alexander Beregalov <a.beregalov@gmail.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2009-05-12 14:41:47 -07:00
Davide Libenzi
bfe3891a5f epoll: fix size check in epoll_create()
Fix a size check WRT the manual pages.  This was inadvertently broken by
commit 9fe5ad9c8c ("flag parameters
add-on: remove epoll_create size param").

Signed-off-by: Davide Libenzi <davidel@xmailserver.org>
Cc: <Hiroyuki.Mach@gmail.com>
Cc: rohit verma <rohit.170309@gmail.com>
Cc: Ulrich Drepper <drepper@redhat.com>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-05-12 14:11:35 -07:00
Harald Welte
ee1ef82c7e viafb: make it work on x86_64
Fix a bug in viafb on x86_64 builds (e.g. for VIA Nano CPU).

You cannot make the assumption that sizeof(unsigned int) ==
sizeof(unsigned long), so the parsing of the default mode (640x480) fails,
leading to a division by zero during insmod of the driver.

Signed-off-by: Harald Welte <HaraldWelte@viatech.com>
Cc: <JosephChan@via.com.tw>
Cc: <ScottFang@viatech.com.cn>
Cc: Acked-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-05-12 14:11:35 -07:00
Jean Delvare
ee83126bb1 fbdev: remove outdated advice about I2C configuration
The required I2C modules are now selected automatically by the means
of select statements in Kconfig, so there is no point in confusing the
users with options he/she would be supposed to enable manually.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: Krzysztof Helt <krzysztof.h1@poczta.fm>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-05-12 14:11:35 -07:00
Tejun Heo
9aa7a7d5da alpha: unbreak percpu again
Commit 9b8de7479d ("FRV: Fix the section
attribute on UP DECLARE_PER_CPU()") cleaned up DECLARE/DEFINE_PER_CPU()
macros and in the process made alpha percpu.h include
include/asm-generic/percpu.h which breaks compilation due to duplicate
definitions.

Remove inclusion of generic asm helper file and define whatever necessary
in alpha header proper.

In the longer term, percpu definitions will be unified and all these
little subtlties will be removed.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: David Howells <dhowells@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-05-12 14:11:35 -07:00
Kim Kyuwon
f993004d73 rtc: rtc-twl4030 don't mask alarm interrupts on suspend
This patch enables the alarm interrupt of TWL4030 RTC to wake up the
system from suspend. You can test this patch with following command.

# echo +10 > /sys/class/rtc/rtc0/wakealarm; echo mem > /sys/power/state;

Signed-off-by: Kim Kyuwon <q1.kim@samsung.com>
Acked-by: David Brownell <david-b@pacbell.net>
Cc: Kyungmin Park <kyungmin.park@samsung.com>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-05-12 14:11:35 -07:00
Arnd Bergmann
ecf4667d30 syscalls.h add the missing sys_pipe2 declaration
In order to build the generic syscall table, we need a declaration for
every system call.  sys_pipe2 was added without a proper declaration, so
add this to syscalls.h now.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Ulrich Drepper <drepper@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-05-12 14:11:35 -07:00
Daniel Ribeiro
7348d82a67 pxa2xx_spi: prevent panic case setup() fails
setup() may fail before ctldata is set, causing a kernel panic on
cleanup().

Signed-off-by: Daniel Ribeiro <drwyrm@gmail.com>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Cc: Eric Miao <eric.y.miao@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-05-12 14:11:34 -07:00
Linus Torvalds
816dc3c82b Merge branch 'i2c-for-2630-rc5' of git://aeryn.fluff.org.uk/bjdooks/linux
* 'i2c-for-2630-rc5' of git://aeryn.fluff.org.uk/bjdooks/linux:
  i2c-cpm: Pass dev ptr to dma_*_coherent rather than NULL
  i2c: Enable i2c-s3c2410 for S3C64XX too
  i2c-mpc: bug fix for MPC52xx clock setting and printout
  i2c-pxa.c: timeouts off by 1
2009-05-12 11:21:51 -07:00
Linus Torvalds
3b4334e200 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: tsc2007 - fix locking in hrtimer handler
  Input: atkbd - add force release keys quirk for Amilo Xi 3650
  Input: ff-memless - fix signed to unsigned bit overflow
  Input: joydev - blacklist digitizers
2009-05-12 11:21:24 -07:00
Jesse Barnes
f29ce72795 drm/i915: automatically select FRAMEBUFFER_CONSOLE if !EMBEDDED
People keep getting bitten by this, so just auto-select it by default,
assuming most configurations will actually want a console.

Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-05-12 09:08:31 -07:00
Dan Carpenter
34fd5dad46 Remove unreached code in drivers/net/mlx4/en_rx.c
Remove the return after the goto.  We want the goto because it frees
memory as well as returning err.

Found by smatch (http://repo.or.cz/w/smatch.git).

Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-05-12 07:38:09 -07:00
Chris Zankel
78f3cdfa2a xtensa: Fix linker script to include .literal sections
Fix resembles implementation from Marc Gauthier and Piet Denaly:

In the Xtensa architecture, assembly generates literals which must always
precede the code (the L32R instruction that loads them only uses negative
PC-relative offsets).  For any *.text section, literals are placed in a
corresponding *.literal section.  The linker script (vmlinux.lds) must
place these in the correct order.  It must also combine them, when the
*.text section can be larger than L32R's 256 kB range.

For example, this doesn't work:  *(.literal) *(.text) because L32R
instructions at the end of .text can't reach the literals.

The linker can solve this if they are combined in parentheses, like this:
       *(.literal .text)
because it is now allowed mix literals in .text to bring them in range.

None of this is done by standard vmlinux.lds.h macros such as TEXT_TEXT
and INIT_TEXT.  To avoid replicating the logic of that header file, we
instead post-process the generated linker script to convert *(xxx.text)
to *(xxx.literal xxx.text) for the following text sections:
       .text .ref.text .*init.text .*exit.text .text.*
using a sed script.  To do this we must override the default rule for
vmlinux.lds (see scripts/Makefile.build and the top-level Makefile)
to insert this extra step.

Signed-off-by: Marc Gauthier <marc@tensilica.com>
Signed-off-by: Pete Delaney <piet@tensilica.com>
Signed-off-by: Chris Zankel <chris@zankel.net>
2009-05-11 23:40:33 -07:00
Oskar Schirmer
866e514d6a xtensa: update s6105_defconfig for ccount calibration
The previous patch enabled ccount calibration for the s6000 variant.
This patch updates the defconfig for the s6105 platform to reflect this
change.

Signed-off-by: Oskar Schirmer <os@emlix.com>
Signed-off-by: Chris Zankel <chris@zankel.net>
2009-05-11 22:00:22 -07:00
Oskar Schirmer
b070a03f64 xtensa: implement ccount calibration for s6000
Calculate core frequency from timers at boot time
instead of assuming a fixed frequency. This is
useful as the true frequency is set up by the
boot loader, thus variable.

Signed-off-by: Oskar Schirmer <os@emlix.com>
Signed-off-by: Chris Zankel <chris@zankel.net>
2009-05-11 22:00:17 -07:00
Oskar Schirmer
d15f05eb8c xtensa: fix wrong extern declaration renamed in code using it
The variable ccount_nsec has been renamed to nsec_per_ccount
in arch/xtensa/kernel/time.c in 2b8aea74 (2007-08-05),
but the fix failed to rename the variable in
arch/xtensa/include/asm/timex.h as well.

Signed-off-by: Oskar Schirmer <os@emlix.com>
Signed-off-by: Chris Zankel <chris@zankel.net>
2009-05-11 22:00:11 -07:00
Johannes Weiner
1fb137c1e3 xtensa: register gpio chip before use
Platform initialization sets up the LED heartbeat that is controlled
via GPIO.  Requesting the GPIO pins fails, however, as the chip is
only initialized later by a device_initcall().

Fix this up by exporting the initialization function.  Let the
platform set up the chip before it starts using it.

Signed-off-by: Johannes Weiner <jw@emlix.com>
Signed-off-by: Chris Zankel <chris@zankel.net>
2009-05-11 22:00:07 -07:00
Johannes Weiner
586411dcd1 xtensa: always use correct stack pointer for stack traces
Commit '28a0ce7 xtensa: use correct stack pointer for stack traces'
changed the stack tracer from always reading the stack pointer
register to always using the saved value in the task descriptor.

The author was too dense to consider the fact that the saved stack
value is stale for a running process und thus unusable for 'current'.

What we do now is to use the stack pointer register (a1) for when the
task is unknown - we can't help it then - or when the task is
'current'.  For everything else use the saved stack pointer value
contained in the task descriptor.

Signed-off-by: Johannes Weiner <jw@emlix.com>
Signed-off-by: Chris Zankel <chris@zankel.net>
2009-05-11 21:59:43 -07:00
Chris Zankel
7dbe5c5424 xtensa: Fix checksum header file
We need to add a "memory" dependency (barrier) in assembly macros
that access (read or write) memory. Otherwise, the compiler might
ill-optimize the order of memory accesses.

Signed-off-by: Chris Zankel <chris@zankel.net>
2009-05-11 21:48:23 -07:00
Chris Zankel
35e71f9068 xtensa: Fix architecture specific Kconfig
Move a misplace endmenu marker to enable platform options and
disable PCI and automatic calibrating for the XT2K board. The
on-board PCI bridge is somewhat broken, anyway, and the
calibrating relies on some whacky usage of the serial port.

Signed-off-by: Chris Zankel <chris@zankel.net>
2009-05-11 21:48:17 -07:00
Mark Ware
36521c271e i2c-cpm: Pass dev ptr to dma_*_coherent rather than NULL
Recent DMA changes result in a BUG() when NULL is passed to
dma_alloc_coherent in place of a device.

Signed-off-by: Mark Ware <mware@elphinstone.net>
[ben-linux@fluff.org: fix patch moves]
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-05-12 00:36:04 +01:00
Mark Brown
89bc5d4a91 i2c: Enable i2c-s3c2410 for S3C64XX too
This controller is also present on the S3C64xx series processors so
enable the driver in Kconfig for those platforms.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-05-12 00:36:03 +01:00
Wolfgang Grandegger
1904b03430 i2c-mpc: bug fix for MPC52xx clock setting and printout
The clock setting did not work for the MPC52xx due to a stupid bug.
Furthermore, the dev info output "clock=0" for old device trees was
misleading. This patch fixes both issues.

Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
Acked-by: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-05-12 00:35:56 +01:00
Thierry Reding
705a76d2d2 Input: tsc2007 - fix locking in hrtimer handler
Now that hrtimers are always running in hard irq context we can't
unconditionally enable interrupts at the end of the timer function.

Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
Signed-off-by: Kwangwoo Lee <kwangwoo.lee@gmail.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-05-11 15:35:48 -07:00
Adrian Batzill
9166d0f620 Input: atkbd - add force release keys quirk for Amilo Xi 3650
Signed-off-by: Adrian Batzill <agib@gmx.de>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-05-11 15:30:45 -07:00
J. Bruce Fields
8daed1e549 nfsd: silence lockdep warning
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
2009-05-11 17:23:14 -04:00
Linus Torvalds
1d80cac0fe Merge branch 'for-linus' of git://repo.or.cz/cris-mirror
* 'for-linus' of git://repo.or.cz/cris-mirror:
  CRISv32: Fix typo compile error in ARTPEC-3 gpio driver.
  CRIS: Wire up syscalls signalfd4 to writev.
  CRISv32: Remove obsolete vcs_hook.o from Makefile
  CRIS: Merge machine dependent boot/compressed and boot/rescue
2009-05-11 12:43:41 -07:00
Linus Torvalds
7b5ca22643 Merge branch 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev
* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev:
  ata_piix: The Sony TZ90 needs the cable type hardcoding
  ata_piix: ICH7 does not support correct MWDMA timings
  Avoid world-writable sysfs files in libata driver.
  libata: fix suspend/resume for ATA SEMB devices
  libata: clear ering on resume
  pata_pdc202xx_old: fix UDMA33 handling
  sata_mv: use new sata phy register settings for new devices
  libata: fix attach error handling
2009-05-11 12:42:55 -07:00
Jeff Mahoney
2b79bc4f7e dup2: Fix return value with oldfd == newfd and invalid fd
The return value of dup2 when oldfd == newfd and the fd isn't valid is
not getting properly sign extended.  We end up with 4294967287 instead
of -EBADF.

I've reproduced this on SLE11 (2.6.27.21), openSUSE Factory
(2.6.29-rc5), and Ubuntu 9.04 (2.6.28).

This patch uses a signed int for the error value so it is properly
extended.

Commit 6c5d0512a0 introduced this
regression.

Reported-by: Jiri Dluhos <jdluhos@novell.com>
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-05-11 12:18:06 -07:00
Alan Cox
124a6eece3 ata_piix: The Sony TZ90 needs the cable type hardcoding
The Sony TZ90 needs the cable type hardcoding. See bug #12734

Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2009-05-11 14:31:36 -04:00
Alan Cox
c611bed780 ata_piix: ICH7 does not support correct MWDMA timings
See Errata documentation. The recommended workaround is to use PIO4 instead
which will we automatically do by flagging this mode not available.

Signed-off-by: Alan Cox <alan.cox@linux.intel.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2009-05-11 14:31:34 -04:00
Vitaly Mayatskikh
ea7a5ed58f Avoid world-writable sysfs files in libata driver.
Signed-off-by: Vitaly Mayatskikh <v.mayatskih@gmail.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2009-05-11 14:31:31 -04:00