Commit Graph

91990 Commits

Author SHA1 Message Date
Michael Ellerman
36f8a2c4c6 [POWERPC] Add CONFIG_PPC_PSERIES_DEBUG to enable debugging for platforms/pseries
Add a DEBUG config setting which turns on all (most) of the debugging
under platforms/pseries.

To have this take effect we need to remove all the #undef DEBUG's, in
various files. We leave the #undef DEBUG in platforms/pseries/lpar.c,
as this enables debugging printks from the low-level hash table routines,
and tends to make your system unusable. If you want those enabled you
still have to turn them on by hand.

Also some of the RAS code has a DEBUG block which causes a functional
change, so I've keyed this off a different (non-existant) debug #define.

This is only enabled if you have PPC_EARLY_DEBUG enabled also.

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-04-24 21:08:12 +10:00
Michael Ellerman
f7ebf352b2 [POWERPC] Convert from DBG() to pr_debug() in platforms/pseries/
In pseries/lpar.c, fix some printf specifier mismatches, and add
a newline to one printk.

In pseries/rtasd.c add "rtasd" to some messages to make it clear
where they're coming from.

In pseries/scanlog.c remove the hand-rolled runtime debugging support
in there. This file has been largely unchanged for eons, if we need to
debug it in future we can recompile.

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-04-24 21:08:12 +10:00
Michael Ellerman
cb1e2ab45a [POWERPC] Register udbg console early on pseries LPAR
On pseries LPAR we can call the udbg routines, and the udbg console very
early. So mark the udbg console as safe to call early in boot, and register
the udbg console as soon as the udbg routines are hooked up.

This allows platforms/pseries code to use printk() and pr_debug() rather
than needing to call udbg_printf() directly for early debugging. This is
nice because a) it's standard, b) it goes via the printk buffer, and c)
you can get printk time stamps.

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-04-24 21:08:12 +10:00
Michael Ellerman
f336632f19 [POWERPC] Mark udbg console as CON_ANYTIME, ie. callable early in boot
The udbg console should be safe to call basically at any time after boot.
It does not need any per-cpu resources or for the cpu to be online, as
long as there is a udbg_putc routine hooked up it should work. So mark it
as CON_ANYTIME.

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-04-24 21:08:11 +10:00
Michael Ellerman
c7afb4e229 [POWERPC] Set udbg_console index to 0
Because the udbg_console has CON_ENABLED set, it's possible that when we
register it with the console code the index won't be set. This leads to
slightly confusing boot messages like:

[    0.000000] console [udbg-1] enabled

We could remove CON_ENABLED, but we don't want to do that, we always
want the udbg console to be activated, even if the user specified some
other console on the command line.

The simplest fix seems to be just to set the index to 0 by hand. There
is no issue with duplicate udbg consoles, as we guard against registering
multiple times in register_early_udbg_console().

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-04-24 21:08:11 +10:00
Tony Breeds
90035fe378 [POWERPC] Raise the upper limit of NR_CPUS and move the pacas into the BSS
This adds the required functionality to fill in all pacas at runtime.

With NR_CPUS=1024
text    data     bss     dec     hex filename
 137 1704032       0 1704169  1a00e9 arch/powerpc/kernel/paca.o :Before
 121 1179744  524288 1704153  1a00d9 arch/powerpc/kernel/paca.o :After

Also remove unneeded #includes from arch/powerpc/kernel/paca.c

Signed-off-by: Tony Breeds <tony@bakeyournoodle.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-04-24 20:58:04 +10:00
Tony Breeds
9cb82f2f46 [POWERPC] Make iSeries spin on __secondary_hold_spinloop, like pSeries
Currently all iSeries secondary CPUs spin directly on the cpu_start
field in their paca.  Make them spin on the global
__secondary_hold_spinloop until after the pacas have been initialised.

As Stephen Rothwell points out, this works at the moment because
__secondary_hold_spinloop is being set already, but iSeries isn't
looking at it :)

Signed-off-by: Tony Breeds <tony@bakeyournoodle.com>
Acked-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-04-24 20:58:03 +10:00
Kumar Gala
4ae2dcb633 [POWERPC] Clean up misc_64.S
* Removed get_msr(), get_srr0(), and get_srr1() - not used anywhere
* Use STACK_FRAME_OVERHEAD instead of magic number

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-04-24 20:58:03 +10:00
Michael Ellerman
988479ebcc [POWERPC] Use of_get_next_parent() in platforms/cell/axon_msi.c
Replace two open-coded occurences of the of_get_next_parent() logic.

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-04-24 20:58:03 +10:00
Michael Ellerman
5c02cd2fb8 [POWERPC] Discourage people from fiddling with kernel data from prom_init
As BenH said the other day, it is an "accident" that prom_init.o is
linked with the rest of the kernel.  The truth is a little more
subtle, prom_init isn't truly bootloader, it does access kernel data
in a few places.

What we can do is discourage people from adding new code that accesses
data outside of prom_init.  And hence this patch; from the script:

 # This script checks prom_init.o to see what external symbols it
 # is using, if it finds symbols not in the whitelist it returns
 # an error. The point of this is to discourage people from
 # intentionally or accidentally adding new code to prom_init.c
 # which has side effects on other parts of the kernel.

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-04-24 20:58:03 +10:00
Timur Tabi
d9e9d82c24 [POWERPC] Add Timur Tabi to the MAINTAINERS file
Add Timur Tabi as the maintainer for the Freescale QE library, the
Freescale QE UART device driver, the Freescale SOC sound drivers, and
the Crystal Semiconductor CS4270 device driver.

Signed-off-by: Timur Tabi <timur@freescale.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-04-24 20:58:03 +10:00
Kumar Gala
91120cc8e0 [POWERPC] Cleanup asm-offsets.c
* Removed TI_EXECDOMAIN define as its not used anywhere
* Use STACK_INT_FRAME_SIZE to allow common define of INT_FRAME_SIZE
* Define TI_CPU on both ppc32 & ppc64 (removes an ifdef).

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-04-24 20:58:02 +10:00
Kumar Gala
f608600e74 [POWERPC] Clean up access to thread_info in assembly
Use (31-THREAD_SHIFT) to get to thread_info from stack pointer.  This makes
the code a bit easier to read and more robust if we ever change THREAD_SHIFT.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-04-24 20:58:02 +10:00
Christoph Hellwig
885aa35c96 [POWERPC] Fix new warnings arising from stacktrace patch
Remove the inclusion of asm-offsets.h from stacktrace.c.  It isn't
supposed to be included in C code and it causes problems with multiple
definitions of things.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-04-24 20:58:02 +10:00
Kumar Gala
2c419bdeca [POWERPC] Port fixmap from x86 and use for kmap_atomic
The fixmap code from x86 allows us to have compile time virtual addresses
that we change the physical addresses of at run time.

This is useful for applications like kmap_atomic, PCI config that is done
via direct memory map, kexec/kdump.

We got ride of CONFIG_HIGHMEM_START as we can now determine a more optimal
location for PKMAP_BASE based on where the fixmap addresses start and
working back from there.

Additionally, the kmap code in asm-powerpc/highmem.h always had debug
enabled.  Moved to using CONFIG_DEBUG_HIGHMEM to determine if we should
have the extra debug checking.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-04-24 20:58:02 +10:00
Adrian Bunk
2fd53e02be [POWERPC] char/xilinx_hwicap/ section fix
This patch fixes the following build error:

<--  snip  -->

...
  CC [M]  drivers/char/xilinx_hwicap/xilinx_hwicap.o
...
/home/bunk/linux/kernel-2.6/git/linux-2.6/drivers/char/xilinx_hwicap/xilinx_hwicap.c:806: error: hwicap_of_match causes a section type conflict
/home/bunk/linux/kernel-2.6/git/linux-2.6/drivers/char/xilinx_hwicap/xilinx_hwicap.c:806: error: hwicap_of_match causes a section type conflict
make[4]: *** [drivers/char/xilinx_hwicap/xilinx_hwicap.o] Error 1

<--  snip  -->

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-04-24 20:58:02 +10:00
Adrian Bunk
138decf83f [POWERPC] drivers/of/of_i2c.c: Add MODULE_LICENSE
After commit 585468e5d5
([POWERPC] i2c: Fix build breakage introduced by OF helpers)
drivers/of/of_i2c.c needs a MODULE_LICENSE.

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-04-24 20:58:01 +10:00
Kumar Gala
37dd2badcf [POWERPC] 85xx: Add support for relocatable kernel (and booting at non-zero)
Added support to allow an 85xx kernel to be run from a non-zero physical
address (useful for cooperative asymmetric multiprocessing situations and
kdump).  The support can be configured at compile time by setting
CONFIG_PAGE_OFFSET, CONFIG_KERNEL_START, and CONFIG_PHYSICAL_START as
desired.

Alternatively, the kernel build can set CONFIG_RELOCATABLE.  Setting this
config option causes the kernel to determine at runtime the physical
addresses of CONFIG_PAGE_OFFSET and CONFIG_KERNEL_START.  If
CONFIG_RELOCATABLE is set, then CONFIG_PHYSICAL_START has no meaning.
However, CONFIG_PHYSICAL_START will always be used to set the LOAD program
header physical address field in the resulting ELF image.

Currently we are limited to running at a physical address that is a
multiple of 256M.  This is due to how we map TLBs to cover
lowmem.  This should be fixed to allow 64M or maybe even 16M alignment
in the future.  It is considered an error to try and run a kernel at a
non-aligned physical address.

All the magic for this support is accomplished by proper initialization
of the kernel memory subsystem and use of ARCH_PFN_OFFSET.

The use of ARCH_PFN_OFFSET only affects normal memory and not IO mappings.
ioremap uses map_page and isn't affected by ARCH_PFN_OFFSET.

/dev/mem continues to allow access to any physical address in the system
regardless of how CONFIG_PHYSICAL_START is set.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-04-24 20:58:01 +10:00
Josh Boyer
96f1bb8a41 [POWERPC] Add strncmp to arch/ppc
Commit 0119536cd3 added an assembly
version of strncmp to PowerPC.  However, it changed a common header
file between arch/ppc and arch/powerpc without adding strncmp to
arch/ppc.  This fixes that omission so that arch/ppc links again.

Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-04-24 20:57:34 +10:00
Josh Boyer
e91d7119ba [POWERPC] 4xx: Fix duplicate phys_addr_t definition
Commit d04ceb3fc2 moved phys_addr_t
definitions to include/asm-powerpc/types.h.  However, arch/ppc 440
builds had a duplicate definition in include/asm-ppc/mmu.h that caused
the build to fail.

This removes the duplicate definition in arch/ppc.

Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-04-24 20:57:34 +10:00
Remi Machet
df40a57ef1 [POWERPC] Fix mv64x60 early console code to use cell-index property
The MPSC driver and prpmc2800.dts have been modified to use property
'cell-index' as the serial port number, but the early serial console
driver for the mv64x60 has not been modified to use this new property.
This fixes it.

Signed-off-by: Remi Machet (rmachet@slac.stanford.edu)
Acked-by: Dale Farnsworth <dale@farnsworth.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-04-24 20:57:34 +10:00
Remi Machet
ff114b669b [POWERPC] Initialize all mv64x60 devices even if one fails
If one of the devices of the mv64x60 init fails, the remaining
devices are not initialized.

This changes the code to display an error and continue the
initialization.

Signed-off-by: Remi Machet (rmachet@slac.stanford.edu)
Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-04-24 20:57:34 +10:00
Remi Machet
21dbfd291f [POWERPC] Use default values if necessary in mv64x60 I2C initialization
I2C parameters freq_m and freq_n are assigned defaults in the code,
but if properties for those parameters are not found in the open
firmware description the init routine returns an error and doesn't
create the platform device.

This changes the code so that it doesn't return an error if the
properties are not found but instead uses the default values.

Signed-off-by: Remi Machet (rmachet@slac.stanford.edu)
Acked-by: Dale Farnsworth <dale@farnsworth.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-04-24 20:57:34 +10:00
Benjamin Herrenschmidt
839ad62e75 [POWERPC] Use __weak macro for smp_setup_processor_id
Use the __weak macro instead of the longer __attribute__ ((weak)) form
in one place in init/main.c.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Acked-by: Andrew Morton <akpm@linux-foundation.org>
--

 init/main.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-04-24 20:57:33 +10:00
Benjamin Herrenschmidt
f6a616800e [POWERPC] Fix kernel stack allocation alignment
The powerpc kernel stacks need to be naturally aligned, as they
contain the thread info at the bottom, which is obtained by
clearing the low bits of the stack pointer.

However, when using 64K pages, the stack is smaller than a page,
so we use kmalloc to allocate it, but that doesn't provide the
alignment guarantee we need.

It appeared to work so far... until one enables SLUB debugging
which then returns unaligned pointers.  Ooops...

This fixes it by using a slab cache with enforced alignment.  It
relies on my previous patch that adds a thread_info_cache_init()
callback.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Acked-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-04-24 20:57:33 +10:00
Benjamin Herrenschmidt
8c9843e57a [POWERPC] Add thread_info_cache_init() weak hook
Some architectures need to maintain a kmem cache for thread info
structures.  The next commit adds that to powerpc to fix an alignment
problem.

There is no good arch callback to use to initialize that cache
that I can find, so this adds a new one in the form of a weak
function whose default is empty.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Acked-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-04-24 20:57:33 +10:00
Geoff Levand
1d32e21889 [POWERPC] PS3: Fix gelic net module dependency
The PS3 gelic network driver depends on the wake-on-lan support
provided by the PS3 sys manager driver.  Add that dependency
to the GELIC_NET Kconfig option.

Prevents these build errors:

  ps3_gelic_net.c:1277: undefined reference to `.ps3_sys_manager_get_wol'
  ps3_gelic_net.c:1337: undefined reference to `.ps3_sys_manager_set_wol'

CC: Masakazu Mokuno <mokuno@sm.sony.co.jp>
CC: Jeff Garzik <jgarzik@pobox.com>
Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-04-24 20:57:33 +10:00
Michael Ellerman
e988a13960 [POWERPC] Add include of linux/of.h to os-area.c
os-area.c requires routines declared in linux/of.h, so should include it.

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-04-24 20:57:33 +10:00
Michael Ellerman
6df1646e31 [POWERPC] Add include of linux/of.h to numa.c
numa.c requires routines declared in linux/of.h, so should include it.

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-04-24 20:57:32 +10:00
Paul Mackerras
36a23fc8aa Merge branch 'powerpc-next' of master.kernel.org:/pub/scm/linux/kernel/git/galak/powerpc 2008-04-24 20:57:20 +10:00
Kay Sievers
23386fe572 [POWERPC] macintosh/windfarm: Fix platform driver hotplug/coldplug
Since 43cc71eed1, the platform modalias
is prefixed with "platform:".  Add MODULE_ALIAS() to the hotpluggable
"macintosh" platform drivers, to re-enable auto loading.

[dbrownell@users.sourceforge.net: registration fixes]
Signed-off-by: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-04-24 20:56:52 +10:00
Paul Mackerras
df69869034 Revert "[POWERPC] Add compat handler for PTRACE_GETSIGINFO"
This reverts commit e4cc58944c, as
requested by Roland McGrath, because compat_ptrace_request (added in
commit e16b278164, "ptrace:
compat_ptrace_request siginfo") now handles this case.

Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-04-24 14:05:15 +10:00
Christoph Lameter
3dc5063786 slab_err: Pass parameters correctly to slab_bug
Signed-off-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-23 12:47:48 -07:00
Linus Torvalds
79c1cb7a8c Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6:
  [patch 7/7] vfs: mountinfo: show dominating group id
  [patch 6/7] vfs: mountinfo: add /proc/<pid>/mountinfo
  [patch 5/7] vfs: mountinfo: allow using process root
  [patch 4/7] vfs: mountinfo: add mount peer group ID
  [patch 3/7] vfs: mountinfo: add mount ID
  [patch 2/7] vfs: mountinfo: add seq_file_root()
  [patch 1/7] vfs: mountinfo: add dentry_path()
  [PATCH] remove unused label in xattr.c (noise from ro-bind)
2008-04-23 12:24:19 -07:00
Linus Torvalds
b0d19a378a Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6:
  iwlwifi: Fix built-in compilation of iwlcore
  net: Unexport move_addr_to_{kernel,user}
  rt2x00: Select LEDS_CLASS.
  iwlwifi: Select LEDS_CLASS.
  leds: Do not guard NEW_LEDS with HAS_IOMEM
  [IPSEC]: Fix catch-22 with algorithm IDs above 31
  time: Export set_normalized_timespec.
  tcp: Make use of before macro in tcp_input.c
  hamradio: Remove unneeded and deprecated cli()/sti() calls in dmascc.c
  [NETNS]: Remove empty ->init callback.
  [DCCP]: Convert do_gettimeofday() to getnstimeofday().
  [NETNS]: Don't initialize err variable twice.
  [NETNS]: The ip6_fib_timer can work with garbage on net namespace stop.
  [IPV4]: Convert do_gettimeofday() to getnstimeofday().
  [IPV4]: Make icmp_sk_init() static.
  [IPV6]: Make struct ip6_prohibit_entry_template static.
  tcp: Trivial fix to correct function name in a comment in net/ipv4/tcp.c
  [NET]: Expose netdevice dev_id through sysfs
  skbuff: fix missing kernel-doc notation
  [ROSE]: Fix soft lockup wrt. rose_node_list_lock
2008-04-23 12:23:45 -07:00
Len Brown
0093cb1199 pnpacpi: fix potential corruption on "pnpacpi: exceeded the max number of IRQ resources 2"
PNP_MAX_IRQ is 2
If a device invokes pnpacpi_parse_allocated_irqresource() 0, 1, or 2 times, we are happy.
The 3rd time, we will fail and print "pnpacpi: exceeded the max number of IRQ resources: 2"
The 4th and subsequent calls (if this ever happened) would silently scribble on
irq_resource[2], which doesn't actualy exist.

Found-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-23 12:22:13 -07:00
Tomas Winkler
d7d313000b iwlwifi: Fix built-in compilation of iwlcore
This patch fixes problem in Makefile that prevented
built-in compilation of iwlcore

Commit that caused this problem: eadd3c4b ("iwlwifi: make Makefile
more concise")

Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Yi Zhu <yi.zhu@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-04-23 03:48:57 -07:00
Adrian Bunk
cd58f2a96b net: Unexport move_addr_to_{kernel,user}
After the removal of the Solaris binary emulation the exports of 
move_addr_to_{kernel,user} are no longer used.

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-04-23 03:37:49 -07:00
David S. Miller
201410ce85 rt2x00: Select LEDS_CLASS.
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-04-23 03:34:50 -07:00
David S. Miller
e82404ad61 iwlwifi: Select LEDS_CLASS.
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-04-23 03:34:31 -07:00
David S. Miller
00713e224e leds: Do not guard NEW_LEDS with HAS_IOMEM
The LEDS infrastructure itself does not require anything
that a platform dependant upon HAS_IOMEM.

The individual drivers do, but they are properly guarded
with the necessary platform dependencies.

One can even imagine a hypervisor based LED driver that
a platform without HAS_IOMEM might have.

Signed-off-by: David S. Miller <davem@davemloft.net>
2008-04-23 03:33:32 -07:00
Miklos Szeredi
97e7e0f71d [patch 7/7] vfs: mountinfo: show dominating group id
Show peer group ID of nearest dominating group that has intersection
with the mount's namespace.

Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2008-04-23 00:05:09 -04:00
Ram Pai
2d4d4864ac [patch 6/7] vfs: mountinfo: add /proc/<pid>/mountinfo
[mszeredi@suse.cz] rewrite and split big patch into managable chunks

/proc/mounts in its current form lacks important information:

 - propagation state
 - root of mount for bind mounts
 - the st_dev value used within the filesystem
 - identifier for each mount and it's parent

It also suffers from the following problems:

 - not easily extendable
 - ambiguity of mountpoints within a chrooted environment
 - doesn't distinguish between filesystem dependent and independent options
 - doesn't distinguish between per mount and per super block options

This patch introduces /proc/<pid>/mountinfo which attempts to address
all these deficiencies.

Code shared between /proc/<pid>/mounts and /proc/<pid>/mountinfo is
extracted into separate functions.

Thanks to Al Viro for the help in getting the design right.

Signed-off-by: Ram Pai <linuxram@us.ibm.com>
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2008-04-23 00:05:03 -04:00
Miklos Szeredi
a1a2c409b6 [patch 5/7] vfs: mountinfo: allow using process root
Allow /proc/<pid>/mountinfo to use the root of <pid> to calculate
mountpoints.

 - move definition of 'struct proc_mounts' to <linux/mnt_namespace.h>
 - add the process's namespace and root to this structure
 - pass a pointer to 'struct proc_mounts' into seq_operations

In addition the following cleanups are made:

 - use a common open function for /proc/<pid>/{mounts,mountstat}
 - surround namespace.c part of these proc files with #ifdef CONFIG_PROC_FS
 - make the seq_operations structures const

Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2008-04-23 00:04:57 -04:00
Miklos Szeredi
719f5d7f0b [patch 4/7] vfs: mountinfo: add mount peer group ID
Add a unique ID to each peer group using the IDR infrastructure.  The
identifiers are reused after the peer group dissolves.

The IDR structures are protected by holding namepspace_sem for write
while allocating or deallocating IDs.

IDs are allocated when a previously unshared vfsmount becomes the
first member of a peer group.  When a new member is added to an
existing group, the ID is copied from one of the old members.

IDs are freed when the last member of a peer group is unshared.

Setting the MNT_SHARED flag on members of a subtree is done as a
separate step, after all the IDs have been allocated.  This way an
allocation failure can be cleaned up easilty, without affecting the
propagation state.

Based on design sketch by Al Viro.

Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2008-04-23 00:04:51 -04:00
Miklos Szeredi
73cd49ecdd [patch 3/7] vfs: mountinfo: add mount ID
Add a unique ID to each vfsmount using the IDR infrastructure.  The
identifiers are reused after the vfsmount is freed.

Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2008-04-23 00:04:45 -04:00
Miklos Szeredi
9d1bc60138 [patch 2/7] vfs: mountinfo: add seq_file_root()
Add a new function:

  seq_file_root()

This is similar to seq_path(), but calculates the path relative to the
given root, instead of current->fs->root.  If the path was unreachable
from root, then modify the root parameter to reflect this.

Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2008-04-23 00:04:38 -04:00
Ram Pai
6092d04818 [patch 1/7] vfs: mountinfo: add dentry_path()
[mszeredi@suse.cz] split big patch into managable chunks

Add the following functions:

  dentry_path()
  seq_dentry()

These are similar to d_path() and seq_path().  But instead of
calculating the path within a mount namespace, they calculate the path
from the root of the filesystem to a given dentry, ignoring mounts
completely.

Signed-off-by: Ram Pai <linuxram@us.ibm.com>
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2008-04-23 00:04:32 -04:00
Al Viro
934b25c597 [PATCH] remove unused label in xattr.c (noise from ro-bind)
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2008-04-23 00:04:04 -04:00
Linus Torvalds
94bc891b00 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6:
  [PATCH] get rid of __exit_files(), __exit_fs() and __put_fs_struct()
  [PATCH] proc_readfd_common() race fix
  [PATCH] double-free of inode on alloc_file() failure exit in create_write_pipe()
  [PATCH] teach seq_file to discard entries
  [PATCH] umount_tree() will unhash everything itself
  [PATCH] get rid of more nameidata passing in namespace.c
  [PATCH] switch a bunch of LSM hooks from nameidata to path
  [PATCH] lock exclusively in collect_mounts() and drop_collected_mounts()
  [PATCH] move a bunch of declarations to fs/internal.h
2008-04-22 18:28:34 -07:00