The use of xt_sctp.h flagged up -Wshadow warnings in userspace, which
prompted me to look at it and clean it up. Basic operations have been
directly replaced by library calls (memcpy, memset is both available
in the kernel and userspace, and usually faster than a self-made
loop). The is_set and is_clear functions now use a processing time
shortcut, too.
Signed-off-by: Jan Engelhardt <jengelh@computergmbh.de>
Signed-off-by: Patrick McHardy <kaber@trash.net>
Commit 9335f047fe aka
"[NETFILTER]: ip_tables: per-netns FILTER, MANGLE, RAW"
added per-netns _view_ of iptables rules. They were shown to user, but
ignored by filtering code. Now that it's possible to at least ping loopback,
per-netns tables can affect filtering decisions.
netns is taken in case of
PRE_ROUTING, LOCAL_IN -- from in device,
POST_ROUTING, LOCAL_OUT -- from out device,
FORWARD -- from in device which should be equal to out device's netns.
This code is relatively new, so BUG_ON was plugged.
Wrappers were added to a) keep code the same from CONFIG_NET_NS=n users
(overwhelming majority), b) consolidate code in one place -- similar
changes will be done in ipv6 and arp netfilter code.
Signed-off-by: Alexey Dobriyan <adobriyan@sw.ru>
Signed-off-by: Patrick McHardy <kaber@trash.net>
Dump the mark value in log messages similar to nfnetlink_log. This
is useful for debugging complex setups where marks are used for
routing or traffic classification.
Signed-off-by: Patrick McHardy <kaber@trash.net>
Patch splits creation of /proc/net/nf_conntrack, /proc/net/stat/nf_conntrack
and net.netfilter hierarchy into their own functions with dummy ones
if PROC_FS or SYSCTL is not set. Also, remove dead "ret = 0" write
while I'm at it.
Signed-off-by: Alexey Dobriyan <adobriyan@sw.ru>
Signed-off-by: Patrick McHardy <kaber@trash.net>
This expresses __skb_queue_tail() in terms of __skb_insert(),
using __skb_insert_before() as auxiliary function.
Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
This expresses __skb_append in terms of __skb_queue_after, exploiting that
__skb_append(old, new, list) = __skb_queue_after(list, old, new).
Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
By reordering, __skb_queue_after() is expressed in terms of __skb_insert().
Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
By rearranging the order of declarations, __skb_dequeue() is expressed in terms of
* skb_peek() and
* __skb_unlink(),
thus in effect mirroring the analogue implementation of __skb_dequeue_tail().
Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patches adds a call to increment IPSTATS_MIB_OUTFORWDATAGRAMS
when forwarding the packet in ip6_mr_forward() in the IPv6 multicast
routing module (net/ipv6/ip6mr.c).
Signed-off-by: Rami Rosen <ramirose@gmail.com>
Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Since NETDEV_REGISTER notifier chain is responsible for creating
inet6_dev{}, we do not need to call ipv6_find_idev() directly here.
Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
The inet6_lookup family of functions requires a net to lookup
a socket in, so give a proper one to them.
No more things to do for dccpv6, since routing is OK and the
ipv4-like transport layer filtering is not done for ipv6.
Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Move the call to inet_ctl_sock_create to init callback (and
inet_ctl_sock_destroy to exit one) and use proper ctl sock
in dccp_v6_ctl_send_reset.
Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Acked-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
And replace all its usage with init_net's socket.
Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Acked-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
They will be responsible for ctl socket initialization, but
currently they are void.
Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Acked-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This call uses the sock to get the net to lookup the routing
in. With CONFIG_NET_NS this code will OOPS, since the sk ptr
is NULL.
After looking inside the ip6_dst_lookup and drawing the analogy
with respective ipv6 code, it seems, that the dccp ctl socket
is a good candidate for the first argument.
Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Acked-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This enables sockets creation with IPPROTO_DCCP and enables
the ip level to pass DCCP packets to the DCCP level.
Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Acked-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The inet_lookup family of functions requires a net to lookup
a socket in, so give a proper one to them.
Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Acked-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The dccp_v4_route_skb used in dccp_v4_ctl_send_reset, currently
works with init_net's routing tables - fix it.
Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Acked-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Move the call to inet_ctl_sock_create to init callback (and
inet_ctl_sock_destroy to exit one) and use proper ctl sock
in dccp_v4_ctl_send_reset.
Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Acked-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
And replace all its usage with init_net's socket.
Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Acked-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
They will be responsible for ctl socket initialization, but
currently they are void.
Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Acked-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
According to the overall struct net design, it will be
filled with DCCP-related members.
Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Acked-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Replace seq_open with seq_open_net and remove tcp_seq_release
completely. seq_release_net will do this job just fine.
Signed-off-by: Denis V. Lunev <den@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
No need to create seq_operations for each instance of 'netstat'.
Signed-off-by: Denis V. Lunev <den@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
tcp_proc_register/tcp_proc_unregister are called with a static pointer only.
Signed-off-by: Denis V. Lunev <den@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
drivers/atm/horizon.c has unusually large number
of static inline functions - 36.
I looked through them. Most of them seems to be small enough,
but a few are big, others are using udelay or busy loop,
and as such are better not be inlined.
This patch removes "inline" from these static functions
(regardless of number of callsites - gcc nowadays auto-inlines
statics with one callsite).
Size difference for 32bit x86:
text data bss dec hex filename
8201 180 6 8387 20c3 linux-2.6-ALLYES/drivers/atm/horizon.o
7840 180 6 8026 1f5a linux-2.6.inline-ALLYES/drivers/atm/horizon.o
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
sk_reuse is declared as "unsigned char", but is set as type valbool in net/core/sock.c.
There is no other place in net/ where sk->sk_reuse is set to a value > 1, so the test
"sk_reuse > 1" can not be true.
Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch modifies TIPC's socket code to use standard kernel
routines to handle time conversions between jiffies and ms.
This ensures proper operation even when HZ isn't 1000.
Acknowledgements to Eric Sesterhenn <snakebyte@gmx.de> for
identifying this issue and proposing a solution.
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch eliminates re-initialization of the standard socket
wait queue used for sleeping in TIPC's socket creation code.
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The xfrm_get_policy() and xfrm_add_pol_expire() put some rather large structs
on the stack to work around the LSM API. This patch attempts to fix that
problem by changing the LSM API to require only the relevant "security"
pointers instead of the entire SPD entry; we do this for all of the
security_xfrm_policy*() functions to keep things consistent.
Signed-off-by: Paul Moore <paul.moore@hp.com>
Acked-by: James Morris <jmorris@namei.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Smack doesn't have the need to create a private copy of the LSM "domain" when
setting NetLabel security attributes like SELinux, however, the current
NetLabel code requires a private copy of the LSM "domain". This patches fixes
that by letting the LSM determine how it wants to pass the domain value.
* NETLBL_SECATTR_DOMAIN_CPY
The current behavior, NetLabel assumes that the domain value is a copy and
frees it when done
* NETLBL_SECATTR_DOMAIN
New, Smack-friendly behavior, NetLabel assumes that the domain value is a
reference to a string managed by the LSM and does not free it when done
Signed-off-by: Paul Moore <paul.moore@hp.com>
Acked-by: James Morris <jmorris@namei.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add a new sctp mailing list linux-sctp@vger.kernel.org.
Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The 'asoc' parameter to sctp_cmd_hb_timer_update() is unused, and
we can remove it.
Signed-off-by: Gui Jianfeng <guijianfeng@cn.fujitsu.com>
Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Replacing (almost) all invocations of list_for_each() with
list_for_each_entry() tightens up the code and allows for the deletion
of numerous list iterator variables that are no longer necessary.
Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Recently I posted a patch to add some informational items to
/proc/net/sctp/assocs. All the information is correct, but because
of how the seqfile show operation is laid out, some of the formatting
is backwards. This patch corrects that formatting, so that the new
information appears at the end of each line, rather than in the middle.
Signed-off-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch fixes a difference between IPv4 and IPv6 when sending packets
to the unspecified address (either 0.0.0.0 or ::) when using raw or
un-connected UDP sockets. There are two cases where IPv6 either fails
to send anything, or sends with the destination address set to ::. For
example:
--> ping -c1 0.0.0.0
PING 0.0.0.0 (127.0.0.1) 56(84) bytes of data.
64 bytes from 127.0.0.1: icmp_seq=1 ttl=64 time=0.032 ms
--> ping6 -c1 ::
PING ::(::) 56 data bytes
ping: sendmsg: Invalid argument
Doing a sendto("0.0.0.0") reveals:
10:55:01.495090 IP localhost.32780 > localhost.7639: UDP, length 100
Doing a sendto("::") reveals:
10:56:13.262478 IP6 fe80::217:8ff:fe7d:4718.32779 > ::.7639: UDP, length 100
If you issue a connect() first in the UDP case, it will be sent to ::1,
similar to what happens with TCP.
This restores the BSD-ism.
Signed-off-by: Brian Haley <brian.haley@hp.com>
Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
- This patch adjusts IPv6 multicast routing module, net/ipv6/ip6mr.c,
to use mroute6 header definitions instead of mroute.
(MFC6_LINES instead of MFC_LINES, MAXMIFS instead of MAXVIFS, mifi_t
instead of vifi_t.)
- In addition, inclusion of some headers was removed as it is not needed.
Signed-off-by: Rami Rosen <ramirose@gmail.com>
Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Check length of setsockopt's optval, which provided by user, before copy it
from user space.
For POSIX compliant, return -EINVAL for setsockopt of short lengths.
Signed-off-by: Wang Chen <wangchen@cn.fujitsu.com>
Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
