Commit Graph

88423 Commits

Author SHA1 Message Date
Joel Becker
3cfd4ab6b6 ocfs2: Add the local node id to the handshake.
This is the second part of the ocfs2_control handshake.  After
negotiating the ocfs2_control protocol, the daemon tells the filesystem
what the local node id is via the SETN message.

Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2008-04-18 08:56:06 -07:00
Joel Becker
de870ef022 ocfs2: Introduce the DOWN message to ocfs2_control
When the control daemon sees a node go down, it sends a DOWN message
through the ocfs2_control device.

Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2008-04-18 08:56:06 -07:00
Joel Becker
462c7e6a25 ocfs2: Start the ocfs2_control handshake.
When a control daemon opens the ocfs2_control device, it must perform a
handshake to tell the filesystem it is something capable of monitoring
cluster status.  Only after the handshake is complete will the filesystem
allow mounts.

This is the first part of the handshake.  The daemon reads all supported
ocfs2_control protocols, then writes in the protocol it will use.

Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2008-04-18 08:56:06 -07:00
Joel Becker
6427a72755 ocfs2: Add the ocfs2_control misc device.
The ocfs2_control misc device is how a userspace control daemon (controld)
talks to the filesystem.  Introduce the bare-bones filesystem ops.

Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2008-04-18 08:56:06 -07:00
Joel Becker
8adf0536c9 ocfs2: Add the user stack module.
Add a skeleton for the stack_user module.  It's just the barebones module
code.

Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2008-04-18 08:56:06 -07:00
Joel Becker
9c6c877c04 ocfs2: Add the 'cluster_stack' sysfs file.
Userspace can now query and specify the cluster stack in use via the
/sys/fs/ocfs2/cluster_stack file.  By default, it is 'o2cb', which is
the classic stack.  Thus, old tools that do not know how to modify this
file will work just fine.  The stack cannot be modified if there is a
live filesystem.

ocfs2_cluster_connect() now takes the expected cluster stack as an
argument.  This way, the filesystem and the stack glue ensure they are
speaking to the same backend.

If the stack is 'o2cb', the o2cb stack plugin is used.  For any other
value, the fsdlm stack plugin is selected.

Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2008-04-18 08:56:05 -07:00
Joel Becker
b61817e116 ocfs2: Add the USERSPACE_STACK incompat bit.
The filesystem gains the USERSPACE_STACK incomat bit and the
s_cluster_info field on the superblock.  When a userspace stack is in
use, the name of the stack is stored on-disk for mount-time
verification.

The "cluster_stack" option is added to mount(2) processing.  The mount
process needs to pass the matching stack name.  If the passed name and
the on-disk name do not match, the mount is failed.

When using the classic o2cb stack, the incompat bit is *not* set and no
mount option is used other than the usual heartbeat=local.  Thus, the
filesystem is compatible with older tools.

Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2008-04-18 08:56:05 -07:00
Joel Becker
74ae4e104d ocfs2: Create stack glue sysfs files.
Introduce a set of sysfs files that describe the current stack glue
state.  The files live under /sys/fs/ocfs2.  The locking_protocol file
displays the version of ocfs2's locking code.  The
loaded_cluster_plugins file displays all of the currently loaded stack
plugins.  When filesystems are mounted, the active_cluster_plugin file
will display the plugin in use.

Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2008-04-18 08:56:05 -07:00
Joel Becker
286eaa95c5 ocfs2: Break out stackglue into modules.
We define the ocfs2_stack_plugin structure to represent a stack driver.
The o2cb stack code is split into stack_o2cb.c.  This becomes the
ocfs2_stack_o2cb.ko module.

The stackglue generic functions are similarly split into the
ocfs2_stackglue.ko module.  This module now provides an interface to
register drivers.  The ocfs2_stack_o2cb driver registers itself.  As
part of this interface, ocfs2_stackglue can load drivers on demand.
This is accomplished in ocfs2_cluster_connect().

ocfs2_cluster_disconnect() is now notified when a _hangup() is pending.
If a hangup is pending, it will not release the driver module and will
let _hangup() do that.

Signed-off-by: Joel Becker <joel.becker@oracle.com>
2008-04-18 08:56:05 -07:00
Joel Becker
e3dad42bf9 ocfs2: Create ocfs2_stack_operations and split out the o2cb stack.
Define the ocfs2_stack_operations structure.  Build o2cb_stack_ops from
all of the o2cb-specific stack functions.  Change the generic stack glue
functions to call the stack_ops instead of the o2cb functions directly.

The o2cb functions are moved to stack_o2cb.c.  The headers are cleaned up
to where only needed headers are included.

In this code, stackglue.c and stack_o2cb.c refer to some shared
extern variables.  When they become modules, that will change.

Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2008-04-18 08:56:05 -07:00
Joel Becker
553aa7e408 ocfs2: Split o2cb code from generic stack functions.
Split off the o2cb-specific funtionality from the generic stack glue
calls.  This is a precurser to wrapping the o2cb functionality in an
operations vector.

Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2008-04-18 08:56:05 -07:00
Joel Becker
63e0c48ae6 ocfs2: Clean up stackglue initialization
The stack glue initialization function needs a better name so that it can be
used cleanly when stackglue becomes a module.

Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2008-04-18 08:56:05 -07:00
Joel Becker
cf0acdcd64 ocfs2: Abstract out a debugging function for underlying dlms.
dlmglue.c was still referencing a raw o2dlm lksb in one instance.  Let's
create a generic ocfs2_dlm_dump_lksb() function.  This allows underlying
DLMs to print whatever they want about their lock.

We then move the o2dlm dump into stackglue.c where it belongs.

Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2008-04-18 08:56:04 -07:00
David Teigland
1693a5c011 ocfs2: handle async EAGAIN from NOQUEUE request
When using fsdlm, -EAGAIN is returned in the async callback for NOQUEUE
requests. Fix up dlmglue to expect this.

Signed-off-by: David Teigland <teigland@redhat.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2008-04-18 08:56:04 -07:00
Joel Becker
de551246e7 ocfs2: Remove CANCELGRANT from the view of dlmglue.
o2dlm has the non-standard behavior of providing a cancel callback
(unlock_ast) even when the cancel has failed (the locking operation
succeeded without canceling).  This is called CANCELGRANT after the
status code sent to the callback.  fs/dlm does not provide this
callback, so dlmglue must be changed to live without it.
o2dlm_unlock_ast_wrapper() in stackglue now ignores CANCELGRANT calls.

Because dlmglue no longer sees CANCELGRANT, ocfs2_unlock_ast() no longer
needs to check for it.  ocfs2_locking_ast() must catch that a cancel was
tried and clear the cancel state.

Making these changes opens up a locking race.  dlmglue uses the the
OCFS2_LOCK_BUSY flag to ensure only one thread is calling the dlm at any
one time.  But dlmglue must unlock the lockres before calling into the
dlm.  In the small window of time between unlocking the lockres and
calling the dlm, the downconvert thread can try to cancel the lock.  The
downconvert thread is checking the OCFS2_LOCK_BUSY flag - it doesn't
know that ocfs2_dlm_lock() has not yet been called.

Because ocfs2_dlm_lock() has not yet been called, the cancel operation
will just be a no-op.  There's nothing to cancel.  With CANCELGRANT,
dlmglue uses the CANCELGRANT callback to clear up the cancel state.
When it comes around again, it will retry the cancel.  Eventually, the
first thread will have called into ocfs2_dlm_lock(), and either the
lock or the cancel will succeed.  The downconvert thread can then do its
downconvert.

Without CANCELGRANT, there is nothing to clean up the cancellation
state.  The downconvert thread does not know to retry its operations.
More importantly, the original lock may be blocking on the other node
that is trying to cancel us.  With neither able to make progress, the
ast is never called and the cancellation state is never cleaned up that
way.  dlmglue is deadlocked.

The OCFS2_LOCK_PENDING flag is introduced to remedy this window.  It is
set at the same time OCFS2_LOCK_BUSY is.  Thus, the downconvert thread
can check whether the lock is cancelable.  If not, it just loops around
to try again.  Once ocfs2_dlm_lock() is called, the thread then clears
OCFS2_LOCK_PENDING and wakes the downconvert thread.  Now, if the
downconvert thread finds the lock BUSY, it can safely try to cancel it.
Whether the cancel works or not, the state will be properly set and the
lock processing can continue.

Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2008-04-18 08:56:04 -07:00
Mark Fasheh
0abd6d1803 ocfs2: Fill node number during cluster stack init
It doesn't make sense to query for a node number before connecting to the
cluster stack. This should be safe to do because node_num is only just
printed,
and we're actually only moving the setting of node num a small amount
further in the mount process.

[ Disconnect when node query fails -- Joel ]

Reviewed-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2008-04-18 08:56:04 -07:00
Joel Becker
6953b4c008 ocfs2: Move o2hb functionality into the stack glue.
The last bit of classic stack used directly in ocfs2 code is o2hb.
Specifically, the check for heartbeat during mount and the call to
ocfs2_hb_ctl during unmount.

We create an extra API, ocfs2_cluster_hangup(), to encapsulate the call
to ocfs2_hb_ctl.  Other stacks will just leave hangup() empty.

The check for heartbeat is moved into ocfs2_cluster_connect().  It will
be matched by a similar check for other stacks.

With this change, only stackglue.c includes cluster/ headers.

Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2008-04-18 08:56:04 -07:00
Joel Becker
19fdb624dc ocfs2: Abstract out node number queries.
ocfs2 asks the cluster stack for the local node's node number for two
reasons; to fill the slot map and to print it. While the slot map isn't
necessary for userspace cluster stacks, the printing is very nice for
debugging. Thus we add ocfs2_cluster_this_node() as a generic API to get
this value. It is anticipated that the slot map will not be used under a
userspace cluster stack, so validity checks of the node num only need to
exist in the slot map code. Otherwise, it just gets used and printed as an
opaque value.

[ Fixed up some "int" versus "unsigned int" issues and made osb->node_num
  truly opaque. --Mark ]

Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2008-04-18 08:56:04 -07:00
Joel Becker
4670c46ded ocfs2: Introduce the new ocfs2_cluster_connect/disconnect() API.
This step introduces a cluster stack agnostic API for initializing and
exiting.  fs/ocfs2/dlmglue.c no longer uses o2cb/o2dlm knowledge to
connect to the stack.  It is all handled in stackglue.c.

heartbeat.c no longer needs to know how it gets called.
ocfs2_do_node_down() is now a clean recovery trigger.

The big gotcha is the ordering of initializations and de-initializations done
underneath ocfs2_cluster_connect().  ocfs2_dlm_init() used to do all
o2dlm initialization in one block.  Thus, the o2dlm functionality of
ocfs2_cluster_connect() is very straightforward.  ocfs2_dlm_shutdown(),
however, did a few things between de-registration of the eviction
callback and actually shutting down the domain.  Now de-registration and
shutdown of the domain are wrapped within the single
ocfs2_cluster_disconnect() call.  I've checked the code paths to make
sure we can safely tear down things in ocfs2_dlm_shutdown() before
calling ocfs2_cluster_disconnect().  The filesystem has already set
itself to ignore the callback.

Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2008-04-18 08:56:04 -07:00
Joel Becker
8f2c9c1b16 ocfs2: Create the lock status block union.
Wrap the lock status block (lksb) in a union.  Later we will add a union
element for the fs/dlm lksb.  Create accessors for the status and lvb
fields.

Other than a debugging function, dlmglue.c does not directly reference
the o2dlm locking path anymore.

Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2008-04-18 08:56:04 -07:00
Joel Becker
7431cd7e8d ocfs2: Use -errno instead of dlm_status for ocfs2_dlm_lock/unlock() API.
Change the ocfs2_dlm_lock/unlock() functions to return -errno values.
This is the first step towards elminiating dlm_status in
fs/ocfs2/dlmglue.c.  The change also passes -errno values to
->unlock_ast().

[ Fix a return code in dlmglue.c and change the error translation table into
  an array of ints. --Mark ]

Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2008-04-18 08:56:03 -07:00
Joel Becker
bd3e76105d ocfs2: Use global DLM_ constants in generic code.
The ocfs2 generic code should use the values in <linux/dlmconstants.h>.
stackglue.c will convert them to o2dlm values.

Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2008-04-18 08:56:03 -07:00
Joel Becker
24ef1815e5 ocfs2: Separate out dlm lock functions.
This is the first in a series of patches to isolate ocfs2 from the
underlying cluster stack. Here we wrap the dlm locking functions with
ocfs2-specific calls. Because ocfs2 always uses the same dlm lock status
callbacks, we can eliminate the callbacks from the filesystem visible
functions.

Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2008-04-18 08:56:03 -07:00
Joel Becker
386a2ef857 ocfs2: New slot map format
The old slot map had a few limitations:

- It was limited to one block, so the maximum slot count was 255.
- Each slot was signed 16bits, limiting node numbers to INT16_MAX.
- An empty slot was marked by the magic 0xFFFF (-1).

The new slot map format provides 32bit node numbers (UINT32_MAX), a
separate space to mark a slot in use, and extra room to grow.  The slot
map is now bounded by i_size, not a block.

Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2008-04-18 08:56:03 -07:00
Joel Becker
fb86b1f071 ocfs2: Define the contents of the slot_map file.
The slot map file is merely an array of __le16.  Wrap it in a structure for
cleaner reference.

Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2008-04-18 08:56:03 -07:00
Joel Becker
fc881fa0d5 ocfs2: De-magic the in-memory slot map.
The in-memory slot map uses the same magic as the on-disk one.  There is
a special value to mark a slot as invalid.  It relies on the size of
certain types and so on.

Write a new in-memory map that keeps validity as a separate field.  Outside
of the I/O functions, OCFS2_INVALID_SLOT now means what it is supposed to.
It also is no longer tied to the type size.

This also means that only the I/O functions refer to 16bit quantities.

Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2008-04-18 08:56:03 -07:00
Joel Becker
1c8d9a6a33 ocfs2: slot_map I/O based on max_slots.
The slot map code assumed a slot_map file has one block allocated.
This changes the code to I/O as many blocks as will cover max_slots.

Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2008-04-18 08:56:02 -07:00
Joel Becker
553abd046a ocfs2: Change the recovery map to an array of node numbers.
The old recovery map was a bitmap of node numbers.  This was sufficient
for the maximum node number of 254.  Going forward, we want node numbers
to be UINT32.  Thus, we need a new recovery map.

Note that we can't keep track of slots here.  We must write down the
node number to recovery *before* we get the locks needed to convert a
node number into a slot number.

The recovery map is now an array of unsigned ints, max_slots in size.
It moves to journal.c with the rest of recovery.

Because it needs to be initialized, we move all of recovery initialization
into a new function, ocfs2_recovery_init().  This actually cleans up
ocfs2_initialize_super() a little as well.  Following on, recovery cleaup
becomes part of ocfs2_recovery_exit().

A number of node map functions are rendered obsolete and are removed.

Finally, waiting on recovery is wrapped in a function rather than naked
checks on the recovery_event.  This is a cleanup from Mark.

Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2008-04-18 08:56:02 -07:00
Joel Becker
d85b20e4b3 ocfs2: Make ocfs2_slot_info private.
Just use osb_lock around the ocfs2_slot_info data.  This allows us to
take the ocfs2_slot_info structure private in slot_info.c.  All access
is now via accessors.

Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2008-04-18 08:56:02 -07:00
Mark Fasheh
8e8a4603b5 ocfs2: Move slot map access into slot_map.c
journal.c and dlmglue.c would refresh the slot map by hand.  Instead, have
the update and clear functions do the work inside slot_map.c.  The eventual
result is to make ocfs2_slot_info defined privately in slot_map.c

Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2008-04-18 08:56:02 -07:00
Linus Torvalds
4b119e21d0 Linux 2.6.25 2008-04-16 19:49:44 -07:00
Linus Torvalds
c970d5a32a Merge git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6:
  it821x: do not describe noraid parameter with its value
  Pb1200/DBAu1200: fix bad IDE resource size
  Au1200: IDE driver build fix
  Au1200: kill IDE driver function prototypes
  avr32 mustn't select HAVE_IDE
2008-04-16 18:58:37 -07:00
Paul Bolle
da19566552 it821x: do not describe noraid parameter with its value
Describe noraid parameter with its name (and not its value).

Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-04-17 01:14:33 +02:00
Sergei Shtylyov
b4dcaea36b Pb1200/DBAu1200: fix bad IDE resource size
The header files for the Pb1200/DBAu1200 boards have wrong definition for the
IDE interface's decoded range length -- it should be 512 bytes according to
what the IDE driver does.  In addition, the IDE platform device claims 1 byte
too many for its memory resource -- fix the platform code and the IDE driver
in accordance.

Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-04-17 01:14:33 +02:00
Sergei Shtylyov
fabd3a223a Au1200: IDE driver build fix
The driver fails to compile with CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA enabled:

drivers/ide/mips/au1xxx-ide.c: In function `auide_build_dmatable':
drivers/ide/mips/au1xxx-ide.c:256: error: implicit declaration of function
`sg_virt'
drivers/ide/mips/au1xxx-ide.c:275: error: implicit declaration of function
`sg_next'
drivers/ide/mips/au1xxx-ide.c:275: warning: assignment makes pointer from
integer without a cast

Fix this by including <linux/scatterlist.h>. While at it, remove the #include's
without which the driver happily builds.

Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-04-17 01:14:33 +02:00
Sergei Shtylyov
09a77441f2 Au1200: kill IDE driver function prototypes
Fix these warnings emitted when compiling drivers/ide/mips/au1xxx-ide.c:

include/asm/mach-au1x00/au1xxx_ide.h:137: warning: 'auide_tune_drive' declared 
`static' but never defined
include/asm/mach-au1x00/au1xxx_ide.h:138: warning: 'auide_tune_chipset' declared
 `static' but never defined

by wiping out the whole "function prototyping" section from the header file
<asm-mips/mach-au1x00/au1xxx_ide.h> as it mostly declared functions that are
already dead in the IDE driver; move the only useful prototype into the driver.

Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-04-17 01:14:33 +02:00
Adrian Bunk
71fc4c0c44 avr32 mustn't select HAVE_IDE
There's a libata based PATA driver for avr32, but no support for 
drivers/ide/ on avr32.

This patch fixes the following compile error:

<--  snip  -->

...
  CC [M]  drivers/ide/ide-cd.o
In file included from /home/bunk/linux/kernel-2.6/git/linux-2.6/drivers/ide/ide-cd.c:37:
/home/bunk/linux/kernel-2.6/git/linux-2.6/include/linux/ide.h:209:21: error: asm/ide.h: No such file or directory
make[3]: *** [drivers/ide/ide-cd.o] Error 1

<--  snip  -->

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Cc: Haavard Skinnemoen <hskinnemoen@atmel.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-04-17 01:14:32 +02:00
Linus Torvalds
6af74b03e0 Merge branch 'for-linus' of git://git.kernel.dk/linux-2.6-block
* 'for-linus' of git://git.kernel.dk/linux-2.6-block:
  block: update git url for blktrace
  io context: increment task attachment count in ioc_task_link()
2008-04-16 07:45:45 -07:00
Linus Torvalds
1076bb4058 Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6:
  USB: remove broken usb-serial num_endpoints check
  USB: option: Add new vendor ID and device ID for AMOI HSDPA modem
  USB: support more Huawei data card product IDs
  USB: option.c: add more device IDs
  USB: Obscure Maxon BP3-USB Device Support 16d8:6280 for option driver
2008-04-16 07:45:05 -07:00
Linus Torvalds
b4b8f57965 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6:
  [TCP]: Add return value indication to tcp_prune_ofo_queue().
  PS3: gelic: fix the oops on the broken IE returned from the hypervisor
  b43legacy: fix DMA mapping leakage
  mac80211: remove message on receiving unexpected unencrypted frames
  Update rt2x00 MAINTAINERS entry
  Add rfkill to MAINTAINERS file
  rfkill: Fix device type check when toggling states
  b43legacy: Fix usage of struct device used for DMAing
  ssb: Fix usage of struct device used for DMAing
  MAINTAINERS: move to generic repository for iwlwifi
  b43legacy: fix initvals loading on bcm4303
  rtl8187: Add missing priv->vif assignments
  netconsole: only set CON_PRINTBUFFER if the user specifies a netconsole
  [CAN]: Update documentation of struct sockaddr_can
  MAINTAINERS: isdn4linux@listserv.isdn4linux.de is subscribers-only
  [TCP]: Fix never pruned tcp out-of-order queue.
  [NET_SCHED] sch_api: fix qdisc_tree_decrease_qlen() loop
2008-04-16 07:44:27 -07:00
Paul Bolle
424b00e2c0 AFS: Do not describe debug parameters with their value
Describe debug parameters with their names (and not their values).

Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-16 07:43:48 -07:00
Greg Kroah-Hartman
07c3b1a100 USB: remove broken usb-serial num_endpoints check
The num_interrupt_in, num_bulk_in, and other checks in the usb-serial
code are just wrong, there are too many different devices out there with
different numbers of endpoints.  We need to just be sticking with the
device ids instead of trying to catch this kind of thing.  It broke too
many different devices.

This fixes a large number of usb-serial devices to get them working
properly again.


Cc: Oliver Neukum <oliver@neukum.org>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-04-15 22:30:53 -07:00
tang kai
32147be4cc USB: option: Add new vendor ID and device ID for AMOI HSDPA modem
This patch add new vendor ID and device ID  for AMOI HSDPA modem. 

From: tang kai <tangk73@hotmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-04-15 22:30:53 -07:00
fangxiaozhi
aad8a278f3 USB: support more Huawei data card product IDs
- declare the unusal device for Huawei data card devices in
   unusual_devs.h
 - disable the product ID matching for Huawei data card devices in
   usb_match_device function of driver.c
 - declare the product IDs in option.c.

Signed-off-by: fangxiaozhi <huananhu@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-04-15 22:30:52 -07:00
Matthias Urlichs
a1d9bc12e0 USB: option.c: add more device IDs
Add devices by AMOI and NovatelWireless.

Signed-Off-By: Matthias Urlichs <matthias@urlichs.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-04-15 22:30:52 -07:00
James Cameron
80d9709832 USB: Obscure Maxon BP3-USB Device Support 16d8:6280 for option driver
The modem was detected, the ttyUSB{0,1,2} appeared, a call could be
made, and the expected data rate was achieved.  Tested for an hour or
two, total of 100Mb.  I shall do more testing.

Signed-off-by: James Cameron <quozl@laptop.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-04-15 22:30:51 -07:00
Vitaliy Gusev
56f367bbfd [TCP]: Add return value indication to tcp_prune_ofo_queue().
Returns non-zero if tp->out_of_order_queue was seen non-empty.
This allows tcp_try_rmem_schedule() to return early.

Signed-off-by: Vitaliy Gusev <vgusev@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-04-15 20:26:34 -07:00
yakui.zhao@intel.com
b87e81e5c6 acpi: unneccessary to scan the PCI bus already scanned
http://bugzilla.kernel.org/show_bug.cgi?id=10124

this change:

      commit 08f1c192c3
      Author: Muli Ben-Yehuda <muli@il.ibm.com>
      Date:   Sun Jul 22 00:23:39 2007 +0300

         x86-64: introduce struct pci_sysdata to facilitate sharing of ->sysdata

         This patch introduces struct pci_sysdata to x86 and x86-64, and
         converts the existing two users (NUMA, Calgary) to use it.

         This lays the groundwork for having other users of sysdata, such as
         the PCI domains work.

         The Calgary bits are tested, the NUMA bits just look ok.

replaces pcibios_scan_root by pci_scan_bus_parented...

but in pcibios_scan_root we have a check about scanned busses.

Cc: <yakui.zhao@intel.com>
Cc: Stian Jordet <stian@jordet.net>
Cc: Len Brown <lenb@kernel.org>
Cc: Greg KH <greg@kroah.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: "Yinghai Lu" <yhlu.kernel@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-15 19:35:41 -07:00
Krzysztof Helt
5f1a3f2ac4 acpi thermal trip points increased to 12
The THERMAL_MAX_TRIPS value is set to 10.  It is too few for the Compaq AP550
machine which has 12 trip points.

Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Cc: Len Brown <lenb@kernel.org>
Cc: Zhang Rui <rui.zhang@intel.com>
Cc: "Rafael J. Wysocki" <rjw@sisk.pl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-15 19:35:41 -07:00
Chuck Ebbert
f0a37e0087 acpi: bus: check once more for an empty list after locking it
List could have become empty after the unlocked check that was made earlier,
so check again inside the lock.

Should fix https://bugzilla.redhat.com/show_bug.cgi?id=427765

Signed-off-by: Chuck Ebbert <cebbert@redhat.com>
Cc: <stable@kernel.org>
Cc: Len Brown <lenb@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-15 19:35:41 -07:00