WLAN Latency Manager support is one of the capabilities that is sent
along with the service bits by firmware. Currently, driver is not
exposing this feature to the user space.
Create and add support for a feature flag to expose this feature to the
userspace.
Change-Id: Ica8213bdaeb32c7be01b6a71a7d8b7a32dc8611b
CRs-Fixed: 2363704
Add an argument to dump only last n dpt records of debug fs
dump_set_dpt_logs file.
Change-Id: I6ce96d1e57db773386e8ebc29436b33b2211a94f
CRs-Fixed: 2362507
After gerrit#2436786(which the Change-ID is
Ie64a05d795660d557d928cb9b874fa5e702f4f55), vdev in monitor mode
is removed from vdev list of pdev. So it is needed to use the new
cdp api, which is cdp_get_mon_vdev_from_pdev instead of
cdp_get_vdev_from_vdev_id in monitor mode to register vdev.
CRs-Fixed: 2350720
Change-Id: Idd36cdb09666783db2042f77708be4dcc6b9d82b
Currently MAC addresses are generated by driver only.
MAC addresses are queried from platform driver or wlan_mac.bin.
If platform driver gives mac addresses, driver uses it, else it
will use wlan_mac.bin to update MAC addresses. If wlan_mac.bin also
don't have MAC addresses then random MAC addresses are generated
using the HW address or using device serial number.
Add an ini support to enable MAC provisioning. If MAC provisioning
is enabled, ensure that platform driver provides atleast 2 provisioned
MAC addresses. Query the derived addresses also from platform driver.
Generate the remaining random MAC addresses.
Change-Id: Ib943f9de70a78ba5d5e87d81c76b20341893f8e9
CRs-Fixed: 2153836
Modify the max tx power value form 22db to 30db
to cover regulatory power requirements.
Change-Id: Id24ed354ed364037ba0ff5dea9de9810fb255962
CRs-fixed: 2362060
Add action_oui ini gActionOUIDisableAggressiveTX to identify peers for
which some of aggressive TX features are to be disabled in firmware,
when DUT is operating in softap mode.
Aggressive TX features disabled are SIFS bursting, assist and support of
more than 32 frames in AMPDU.
Change-Id: I89fb6d40be5110b0331e84ed3239cd997ce0c899
CRs-Fixed: 2364888
Update qcacld driver to use converged CFG component for thermal
mitigation throttle offload feature config params. Also cleanup
hdd ini config based redundant entries.
Change-Id: I9c94d1cd7bf9f630ed92ebe0f9f6d6233a216ee5
CRs-fixed: 2358492
Currently ipa enable config is not updated to dp as a result
dp ipa configuration is skipped even if ipa is enabled from ini.
Update the ipa enable config to dp config parameters.
Change-Id: I6602f2c9d3ac0a4470f18460b0c1057fab4147ca
CRs-Fixed: 2365811
The file cds_ieee80211_common.h contains a large number of macros that
are used to describe most fields in IEEE 802.11 frames. Despite that,
currently WMA has an enum ds_mode to represent the Distribution System
Mode settings. In order to avoid unnecessary duplicate definitions
remove enum ds_mode and instead use the cds_ieee80211_common macros.
Change-Id: I0dc722009e063a1eac0da4afbe77f96772c583b2
CRs-Fixed: 2365060
Previously change I750870ccbe84e817954a3ee1a50e2e8daa5ab661
("qcacld-3.0: Remove obsolete P2P Listen Offload from WMA") removed
the only code that used the p2p_lo_in_progress field in struct
wma_txrx_node. Since it is now obsolete, remove it.
Change-Id: I9e9247a578fb07ef8089f2b5eb544e4e6595244a
CRs-Fixed: 2365059
Previously change Iba16643adf1cbd997138c740345e40c00c8e81f6
("qcacld-3.0: Add Suspend and Resume support in PMO") relocated
Suspend/Resume support from WMA to PMO. However that change left
behind in WMA some remnants that are no longer useful such as the
wma_resume_event, so remove them.
Change-Id: Icf35bafd8fdacdbdc71cfb4309a8bd15bfb1a244
CRs-Fixed: 2365057
Currently some of the parameter names used in the implementation of
wma_mcs_rate_match() do not match the names used in the prototype.
This can be confusing to both humans and to code analysis tools, so
change the camelCase names used in the implementation to match the
prototype.
Change-Id: I87a85a7f1affa6bcad75f33f2bca6aa67475aa47
CRs-Fixed: 2365056
Previously change Id965dd8ee0fbddfa563335fd2fe225dcd20cd162
("qcacld-3.0: Port modulated dtim and override listen interval")
relocated support for configuring Modulated DTIM and Listen Offload
from WMA to PMO. The associated enumerations in enum GEN_PARAM are now
obsolete, so remove them, along with their default value macros.
Change-Id: Iac88c4b5578c24b6fcaefb935459f6e988892a1a
CRs-Fixed: 2365055
The driver contains a prototype for wma_map_channel() but no
implementation, so remove the prototype.
Change-Id: I1a8794c103ac78df8ef4fd1c181ee60350c88058
CRs-Fixed: 2365054
wma_api.h contains two prototypes for functions that are no longer
a part of the driver, so remove them.
Change-Id: I79c96320a23471e0c21cc04ec1b207cda76db199
CRs-Fixed: 2365053
parser_api.h contains two prototypes for functions that are no longer
a part of the driver, so remove them.
Change-Id: Id4cc9967ba95d624a2910dec564c68c679279b09
CRs-Fixed: 2365052
The driver contains FEATURE_WLAN_BTAMP_UT_RF code that is no longer
supported, so remove it.
Change-Id: Id9ff85b5a7c05e01fe6ceac0e9ce3e6aef6ff964
CRs-Fixed: 2365050
The eNeighborRoamEmptyScanCount enumerations are not used by the
current version of the driver, so remove the typedef.
Change-Id: Iafeef92741a6c7c8dd7b3039738b1828eed2ee60
CRs-Fixed: 2364277
The eNeighborRoamScanMode enumerations are not used by the current
version of the driver, so remove the typedef.
Change-Id: I2846de40e09665d1b39d64656e89d05c2009203e
CRs-Fixed: 2364276
csr_neighbor_roam.h contains two prototypes for functions that are no
longer a part of the driver, so remove them.
Change-Id: I3edc2c0625ba20ac6db15d69275b31a5e93ef734
CRs-Fixed: 2364275
The current version of the driver no longer uses the eWNI_SME_SCAN
message IDs, so remove them.
Change-Id: Ia2717c18606e5e771b5d5880bac6f494689ab802
CRs-Fixed: 2364273
The typedef tSirSmeScanRsp is not used by the current generation of
the driver, so remove it.
Change-Id: Id38ae6fe4b0c92e69c6a3f16db7f22ae13ba2fb7
CRs-Fixed: 2364272
Ongoing CFG componitization removed the enumerations for some
legacy configuration items that are now supported by component
configuration. However some of the changes did not remove the
MIN/MAX/DEF/LEN macros or enumeration macros. For all of the
ones that are now unused, remove them now.
Change-Id: Ib48e10cd09ef6811c9104c0b92f4b8f1665e5a5d
CRs-Fixed: 2364270
Both tEnablePsParams and tDisablePsParams contain unused fields, so
remove them.
Change-Id: I148c065ac5425a7695ef7bf1d54bf7975b1ef10e
CRs-Fixed: 2364269
Currently the prototype and the implementation of wma_tx_packet() use
different identifiers for some of the parameters, which is confusing
to both programmers and to tools. In addition currently the
implementation is documented instead of the interface. Therefore move
the documentation to the header file, and changed the prototype to
match the implementation.
Change-Id: I2c2e36c5b85935c37271336970c6532495c20fa6
CRs-Fixed: 2364268
The original definition of struct wmi_unified_pmk_cache had several
anomalies:
1) It contains an unnecessary tlv_header field. Only the fw-api
structs should contain TLV headers.
2) It contains a mis-named session_id field. Common structures should
use converged terminology, in this case vdev_id
qca-wifi-host-cmn change If4be27111c604c16ea437aa654210cdff28220a7
("qcacmn: Refine struct wmi_unified_pmk_cache (phase 1)") completely
addressed the first issue, and as the first phase of fixing the second
issue it replaced the session_id field with an anonymous union which
contains both the existing session_id field and a new vdev_id field.
Being part of a union these field will overlay each other.
For the current phase replace the reference to session_id with a
reference to vdev_id in sme_set_del_pmkid_cache().
Change-Id: Ief4bcb819cb3c842adb74904f2cb2483476eaeb9
CRs-Fixed: 2363433
The lifetimes of DSC contexts do not fit nicely into the current domain
based dynamic memory leak detection scheme. Instead, allocate psoc and
vdev DSC contexts using the new qdf_talloc() API.
Change-Id: Ib15bd26004c3383e25039f4d17026d3e73f52346
CRs-Fixed: 2360348
QBSS IE uses min length of 4 bytes for version 1 and
min length of 5 bytes for version 2. Min length used
for IE is 5 bytes in driver which can cause WPA IE
parse failure if QBSS IE is 4 bytes resulting in failure
in fetching scan results due to security mismatch and
subsequently connection failure.
Fix is to skip the IE which has length less than the
minimum valid length.
Change-Id: I00fbffad221e2d9ecedcb87c9607ac8abd7c55b1
CRs-Fixed: 2364663
Currently the driver scans for the channels as part of ACS
algorithm, to select the best channel for SAP bringup.
But the active dwell time set in the scan request is Zero,
hence the active probe is not sent to the AP, and the DUT
(SAP in this case), just passively scans the channels for BSS,
which causes latency in SAP bringup.
Fix is to initialize the default active dwell time in case of
ACS scan, and set broadcast probe to true.
Change-Id: If4f001a9b272a7894125d81f2895cfa6f6ca2bc4
CRs-Fixed: 2363789
Currently the driver scans for the bssid if it is not present
in the scan cache, due to expire of scan results.
But the active dwell time set in the scan request is Zero,
hence the active probe is not sent to the AP, and the DUT
(STA in this case), just passively scans the channels for that
BSSID, which causes latency in connection.
Fix is to initialize the default active dwell time in case of
scan for ssid.
Change-Id: I38c8c0335e10544d165c510b59e013e9ee2a5031
CRs-Fixed: 2363980
TDLS component related files moved from hostcmn to CLD, this change
adds initial functions, enables TDLS in Kbuild.
Change-Id: Ie5b93f4785c4a973a139dff9e58460fd7ee35e35
CRs-Fixed: 2361589
Cleanup Scan active and passive concurrent time CFG/INI
references from legacy code.
Concurrent active and passive min time component is never used,
so remove it.
Change-Id: Idca5285d58bea659a1a481c1f33827608377ab98
CRs-Fixed: 2363138
The function mlme_get_psoc_obj() is used to get the mlme_obj and
error handling is taken care inside the function if mlme_obj is
null.
Remove the error message in callers of mlme_get_psoc_obj.
Change-Id: Ie7cda790758ad21b1a0275d313a97f322a2f6fd7
CRs-Fixed: 2365042
