Commit Graph

125811 Commits

Author SHA1 Message Date
Jan Kara
4d59bce4f9 quota: Keep which entries were set by SETQUOTA quotactl
Quota in a clustered environment needs to synchronize quota information
among cluster nodes. This means we have to occasionally update some
information in dquot from disk / network. On the other hand we have to
be careful not to overwrite changes administrator did via SETQUOTA.
So indicate in dquot->dq_flags which entries have been set by SETQUOTA
and quota format can clear these flags when it properly propagated
the changes.

Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2009-01-05 08:40:22 -08:00
Jan Kara
db49d2df48 quota: Allow negative usage of space and inodes
For clustered filesystems, it can happen that space / inode usage goes
negative temporarily (because some node is allocating another node
is freeing and they are not completely in sync). So let quota code
allow this and change qsize_t so a signed type so that we don't
underflow the variables.

Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2009-01-05 08:40:21 -08:00
Jan Kara
e3d4d56b97 quota: Convert union in mem_dqinfo to a pointer
Coming quota support for OCFS2 is going to need quite a bit
of additional per-sb quota information. Moreover having fs.h
include all the types needed for this structure would be a
pain in the a**. So remove the union from mem_dqinfo and add
a private pointer for filesystem's use.

Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2009-01-05 08:40:21 -08:00
Jan Kara
1ccd14b9c2 quota: Split off quota tree handling into a separate file
There is going to be a new version of quota format having 64-bit
quota limits and a new quota format for OCFS2. They are both
going to use the same tree structure as VFSv0 quota format. So
split out tree handling into a separate file and make size of
leaf blocks, amount of space usable in each block (needed for
checksumming) and structures contained in them configurable
so that the code can be shared.

Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2009-01-05 08:40:21 -08:00
Jan Kara
cf770c1371 quota: Move quotaio_v[12].h from include/linux/ to fs/
Since these include files are used only by implementation of quota formats,
there's no need to have them in include/linux/.

Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2009-01-05 08:36:58 -08:00
Jan Kara
ca785ec66b quota: Introduce DQUOT_QUOTA_SYS_FILE flag
If filesystem can handle quota files as system files hidden from users, we can
skip a lot of cache invalidation, syncing, inode flags setting etc. when
turning quotas on, off and quota_sync. Allow filesystem to indicate that it is
hiding quota files from users by DQUOT_QUOTA_SYS_FILE flag.

Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2009-01-05 08:36:57 -08:00
Jan Kara
dcb30695f2 quota: Remove compatibility function sb_any_quota_enabled()
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2009-01-05 08:36:56 -08:00
Jan Kara
6929f89124 reiserfs: Use sb_any_quota_loaded() instead of sb_any_quota_enabled().
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2009-01-05 08:36:56 -08:00
Jan Kara
17bd13b31c ext4: Use sb_any_quota_loaded() instead of sb_any_quota_enabled()
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2009-01-05 08:36:56 -08:00
Jan Kara
ee0d5ffe0d ext3: Use sb_any_quota_loaded() instead of sb_any_quota_enabled()
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2009-01-05 08:36:56 -08:00
Jan Kara
f55abc0fb9 quota: Allow to separately enable quota accounting and enforcing limits
Split DQUOT_USR_ENABLED (and DQUOT_GRP_ENABLED) into DQUOT_USR_USAGE_ENABLED
and DQUOT_USR_LIMITS_ENABLED. This way we are able to separately enable /
disable whether we should:
1) ignore quotas completely
2) just keep uptodate information about usage
3) actually enforce quota limits

This is going to be useful when quota is treated as filesystem metadata - we
then want to keep quota information uptodate all the time and just enable /
disable limits enforcement.

Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2009-01-05 08:36:56 -08:00
Jan Kara
e4bc7b4b7f quota: Make _SUSPENDED just a flag
Upto now, DQUOT_USR_SUSPENDED behaved like a state - i.e., either quota
was enabled or suspended or none. Now allowed states are 0, ENABLED,
ENABLED | SUSPENDED. This will be useful later when we implement separate
enabling of quota usage tracking and limits enforcement because we need to
keep track of a state which has been suspended.

Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2009-01-05 08:36:56 -08:00
Jan Kara
1497d3ad48 quota: Remove bogus 'optimization' in check_idq() and check_bdq()
Checks like <= 0 for an unsigned type do not make much sence. The value
could be only 0 and that does not happen often enough for the check
to be worth it.

Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2009-01-05 08:36:56 -08:00
Jan Kara
12095460f7 quota: Increase size of variables for limits and inode usage
So far quota was fine with quota block limits and inode limits/numbers in
a 32-bit type. Now with rapid increase in storage sizes there are coming
requests to be able to handle quota limits above 4TB / more that 2^32 inodes.
So bump up sizes of types in mem_dqblk structure to 64-bits to be able to
handle this. Also update inode allocation / checking functions to use qsize_t
and make global structure keep quota limits in bytes so that things are
consistent.

Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2009-01-05 08:36:55 -08:00
Jan Kara
74f783af95 quota: Add callbacks for allocating and destroying dquot structures
Some filesystems would like to keep private information together with each
dquot. Add callbacks alloc_dquot and destroy_dquot allowing filesystem to
allocate larger dquots from their private slab in a similar fashion we
currently allocate inodes.

Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2009-01-05 08:36:55 -08:00
Tao Ma
9f868f16e4 ocfs2/xattr: Restore not_found in xis
During an xattr set, when we move a xattr which was stored in inode to the
outside bucket, we have to delete it and it will use the old value of
xis->not_found. xis->not_found is removed by ocfs2_calc_xattr_set_need
though, so we must restore it.

Signed-off-by: Tao Ma <tao.ma@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2009-01-05 08:36:55 -08:00
Tao Ma
97aff52ae1 ocfs2/xattr: Fix a bug in xattr allocation estimation
When we extend one xattr's value to a large size, the old value size might
be smaller than the size of a value root. In those cases, we still need to
guess the metadata allocation.

Reported-by: Tiger Yang <tiger.yang@oracle.com>
Signed-off-by: Tao Ma <tao.ma@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2009-01-05 08:36:55 -08:00
Mark Fasheh
53ef99cad9 ocfs2: Remove JBD compatibility layer
JBD2 is fully backwards compatible with JBD and it's been tested enough with
Ocfs2 that we can clean this code up now.

Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2009-01-05 08:36:55 -08:00
Joel Becker
511308d90b ocfs2: Convert ocfs2_read_dir_block() to ocfs2_read_virt_blocks()
Now that we've centralized the ocfs2_read_virt_blocks() code, let's use
it in ocfs2_read_dir_block().

Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2009-01-05 08:36:55 -08:00
Joel Becker
a8549fb5ab ocfs2: Wrap virtual block reads in ocfs2_read_virt_blocks()
The ocfs2_read_dir_block() function really maps an inode's virtual
blocks to physical ones before calling ocfs2_read_blocks().  Let's
extract that to common code, because other places might want to do that.

Other than the block number being virtual, ocfs2_read_virt_blocks()
takes the same arguments as ocfs2_read_blocks().  It converts those
virtual block numbers to physical before calling ocfs2_read_blocks()
directly.  If the blocks asked for are discontiguous, this can mean
multiple calls to ocfs2_read_blocks(), but this is mostly hidden from
the caller.

Like ocfs2_read_blocks(), the caller can pass in an existing
buffer_head.  This is usually done to pick up some readahead I/O.
ocfs2_read_virt_blocks() checks the buffer_head's block number
against the extent map - it must match.

Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2009-01-05 08:36:54 -08:00
Joel Becker
970e4936d7 ocfs2: Validate metadata only when it's read from disk.
Add an optional validation hook to ocfs2_read_blocks().  Now the
validation function is only called when a block was actually read off of
disk.  It is not called when the buffer was in cache.

We add a buffer state bit BH_NeedsValidate to flag these buffers.  It
must always be one higher than the last JBD2 buffer state bit.

The dinode, dirblock, extent_block, and xattr_block validators are
lifted to this scheme directly.  The group_descriptor validator needs to
be split into two pieces.  The first part only needs the gd buffer and
is passed to ocfs2_read_block().  The second part requires the dinode as
well, and is called every time.  It's only 3 compares, so it's tiny.
This also allows us to clean up the non-fatal gd check used by resize.c.
It now has no magic argument.

Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2009-01-05 08:36:53 -08:00
Joel Becker
4ae1d69bed ocfs2: Wrap xattr block reads in a dedicated function
We weren't consistently checking xattr blocks after we read them.
Most places checked the signature, but none checked xb_blkno or
xb_fs_signature.  Create a toplevel ocfs2_read_xattr_block() that does
the read and the validation.

Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2009-01-05 08:36:53 -08:00
Joel Becker
a22305cc69 ocfs2: Wrap dirblock reads in a dedicated function.
We have ocfs2_bread() as a vestige of the original ext-based dir code.
It's only used by directories, though.  Turn it into
ocfs2_read_dir_block(), with a prototype matching the other metadata
read functions.  It's set up to validate dirblocks when the time comes.

Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2009-01-05 08:36:53 -08:00
Joel Becker
5e96581a37 ocfs2: Wrap extent block reads in a dedicated function.
We weren't consistently checking extent blocks after we read them.
Most places checked the signature, but none checked h_blkno or
h_fs_signature.  Create a toplevel ocfs2_read_extent_block() that does
the read and the validation.

Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2009-01-05 08:36:53 -08:00
Joel Becker
4203530613 ocfs2: Morph the haphazard OCFS2_IS_VALID_GROUP_DESC() checks.
Random places in the code would check a group descriptor bh to see if it
was valid. The previous commit unified descriptor block reads,
validating all block reads in the same place.  Thus, these checks are no
longer necessary.  Rather than eliminate them, however, we change them
to BUG_ON() checks.  This ensures the assumptions remain true.  All of
the code paths to these checks have been audited to ensure they come
from a validated descriptor read.

Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2009-01-05 08:36:53 -08:00
Joel Becker
68f64d471b ocfs2: Wrap group descriptor reads in a dedicated function.
We have a clean call for validating group descriptors, but every place
that wants the always does a read_block()+validate() call pair.  Create
a toplevel ocfs2_read_group_descriptor() that does the right
thing.  This allows us to leverage the single call point later for
fancier handling.  We also add validation of gd->bg_generation against
the superblock and gd->bg_blkno against the block we thought we read.

Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2009-01-05 08:36:53 -08:00
Joel Becker
57e3e79711 ocfs2: Consolidate validation of group descriptors.
Currently the validation of group descriptors is directly duplicated so
that one version can error the filesystem and the other (resize) can
just report the problem.  Consolidate to one function that takes a
boolean.  Wrap that function with the old call for the old users.

This is in preparation for lifting the read+validate step into a
single function.

Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2009-01-05 08:36:53 -08:00
Joel Becker
10995aa245 ocfs2: Morph the haphazard OCFS2_IS_VALID_DINODE() checks.
Random places in the code would check a dinode bh to see if it was
valid.  Not only did they do different levels of validation, they
handled errors in different ways.

The previous commit unified inode block reads, validating all block
reads in the same place.  Thus, these haphazard checks are no longer
necessary.  Rather than eliminate them, however, we change them to
BUG_ON() checks.  This ensures the assumptions remain true.  All of the
code paths to these checks have been audited to ensure they come from a
validated inode read.

Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2009-01-05 08:36:52 -08:00
Joel Becker
b657c95c11 ocfs2: Wrap inode block reads in a dedicated function.
The ocfs2 code currently reads inodes off disk with a simple
ocfs2_read_block() call.  Each place that does this has a different set
of sanity checks it performs.  Some check only the signature.  A couple
validate the block number (the block read vs di->i_blkno).  A couple
others check for VALID_FL.  Only one place validates i_fs_generation.  A
couple check nothing.  Even when an error is found, they don't all do
the same thing.

We wrap inode reading into ocfs2_read_inode_block().  This will validate
all the above fields, going readonly if they are invalid (they never
should be).  ocfs2_read_inode_block_full() is provided for the places
that want to pass read_block flags.  Every caller is passing a struct
inode with a valid ip_blkno, so we don't need a separate blkno argument
either.

We will remove the validation checks from the rest of the code in a
later commit, as they are no longer necessary.

Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2009-01-05 08:36:52 -08:00
Tiger Yang
a68979b857 ocfs2: add mount option and Kconfig option for acl
This patch adds the Kconfig option "CONFIG_OCFS2_FS_POSIX_ACL"
and mount options "acl" to enable acls in Ocfs2.

Signed-off-by: Tiger Yang <tiger.yang@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2009-01-05 08:36:52 -08:00
Tiger Yang
89c38bd0ad ocfs2: add ocfs2_init_acl in mknod
We need to get the parent directories acls and let the new child inherit it.
To this, we add additional calculations for data/metadata allocation.

Signed-off-by: Tiger Yang <tiger.yang@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2009-01-05 08:34:20 -08:00
Tiger Yang
060bc66dd5 ocfs2: add ocfs2_acl_chmod
This function is used to update acl xattrs during file mode changes.

Signed-off-by: Tiger Yang <tiger.yang@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2009-01-05 08:34:20 -08:00
Tiger Yang
23fc2702be ocfs2: add ocfs2_check_acl
This function is used to enhance permission checking with POSIX ACLs.

Signed-off-by: Tiger Yang <tiger.yang@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2009-01-05 08:34:20 -08:00
Tiger Yang
929fb014e0 ocfs2: add POSIX ACL API
This patch adds POSIX ACL(access control lists) APIs in ocfs2. We convert
struct posix_acl to many ocfs2_acl_entry and regard them as an extended
attribute entry.

Signed-off-by: Tiger Yang <tiger.yang@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2009-01-05 08:34:20 -08:00
Tiger Yang
4e3e9d027f ocfs2: add ocfs2_xattr_get_nolock
This function does the work of ocfs2_xattr_get under an open lock.

Signed-off-by: Tiger Yang <tiger.yang@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2009-01-05 08:34:20 -08:00
Tiger Yang
534eadddc1 ocfs2: add ocfs2_init_security in during file create
Security attributes must be set when creating a new inode.

We do this in three steps.

- First, get security xattr's name and value by security_operation

- Calculate and reserve the meta data and clusters needed by this security
  xattr before starting transaction

- Finally, we set it before add_entry

Signed-off-by: Tiger Yang <tiger.yang@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2009-01-05 08:34:20 -08:00
Tiger Yang
923f7f3102 ocfs2: add security xattr API
This patch add security xattr set/get/list APIs to
support security attributes in Ocfs2.

Signed-off-by: Tiger Yang <tiger.yang@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2009-01-05 08:34:20 -08:00
Tiger Yang
6c3faba442 ocfs2: add ocfs2_xattr_set_handle
This function is used to set xattr's in a started transaction. It is only
called during inode creation inode for initial security/acl xattrs of the
new inode. These xattrs could be put into ibody or extent block, so xattr
bucket would not be use in this case.

Signed-off-by: Tiger Yang <tiger.yang@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2009-01-05 08:34:19 -08:00
Tiger Yang
f5d362022a ocfs2: move new inode allocation out of the transaction
Move out inode allocation from ocfs2_mknod_locked() because
vfs_dq_init() must be called outside of a transaction.

Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Tiger Yang <tiger.yang@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2009-01-05 08:34:19 -08:00
Mark Fasheh
fecc01126d ocfs2: turn __ocfs2_remove_inode_range() into ocfs2_remove_btree_range()
This patch genericizes the high level handling of extent removal.
ocfs2_remove_btree_range() is nearly identical to
__ocfs2_remove_inode_range(), except that extent tree operations have been
used where necessary. We update ocfs2_remove_inode_range() to use the
generic helper. Now extent tree based structures have an easy way to
truncate ranges.

Signed-off-by: Mark Fasheh <mfasheh@suse.com>
Acked-by: Joel Becker <joel.becker@oracle.com>
2009-01-05 08:34:19 -08:00
Tao Ma
85db90e778 ocfs2/xattr: Merge xattr set transaction.
In current ocfs2/xattr, the whole xattr set is divided into
many steps are many transaction are used, this make the
xattr set process isn't like a real transaction, so this
patch try to merge all the transaction into one. Another
benefit is that acl can use it easily now.

I don't merge the transaction of deleting xattr when we
remove an inode. The reason is that if we have a large number
of xattrs and every xattrs has large values(large enough
for outside storage), the whole transaction will be very
huge and it looks like jbd can't handle it(I meet with a
jbd complain once). And the old inode removal is also divided
into many steps, so I'd like to leave as it is.

Note:
In xattr set, I try to avoid ocfs2_extend_trans since if
the credits aren't enough for the extension, it will commit
all the dirty blocks and create a new transaction which may
lead to inconsistency in metadata. All ocfs2_extend_trans
remained are safe now.

Signed-off-by: Tao Ma <tao.ma@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2009-01-05 08:34:19 -08:00
Tao Ma
78f30c314a ocfs2/xattr: Reserve meta/data at the beginning of ocfs2_xattr_set.
In ocfs2 xattr set, we reserve metadata and clusters in any place
they are needed. It is time-consuming and ineffective, so this
patch try to reserve metadata and clusters at the beginning of
ocfs2_xattr_set.

Signed-off-by: Tao Ma <tao.ma@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2009-01-05 08:34:19 -08:00
Tao Ma
c73f60f900 ocfs2/xattr: Move clusters free into dealloc.
Move clusters free process into dealloc context so that
they can be freed after the transaction.

Signed-off-by: Tao Ma <tao.ma@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2009-01-05 08:34:19 -08:00
Tao Ma
2891d290aa ocfs2: Add clusters free in dealloc_ctxt.
Now in ocfs2 xattr set, the whole process are divided into many small
parts and they are wrapped into diffrent transactions and it make the
set doesn't look like a real transaction. So we want to integrate it
into a real one.

In some cases we will allocate some clusters and free some in just one
transaction. e.g, one xattr is larger than inline size, so it and its
value root is stored within the inode while the value is outside in a
cluster. Then we try to update it with a smaller value(larger than the
size of root but smaller than inline size), we may need to free the
outside cluster while allocate a new bucket(one cluster) since now the
inode may be full. The old solution will lock the global_bitmap(if the
local alloc failed in stress test) and then the truncate log. This will
cause a ABBA lock with truncate log flush.

This patch add the clusters free in dealloc_ctxt, so that we can record
the free clusters during the transaction and then free it after we
release the global_bitmap in xattr set.

Signed-off-by: Tao Ma <tao.ma@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2009-01-05 08:34:18 -08:00
Tao Ma
976331d878 ocfs2/xattr: Only extend xattr bucket in need.
When the first block of a bucket is filled up with xattr
entries, we normally extend the bucket. But if we are
just replace one xattr with small length, we don't need
to extend it. This is important since we will calculate
what we need before the transaction and in this situation
no resources will be allocated.

Signed-off-by: Tao Ma <tao.ma@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2009-01-05 08:34:18 -08:00
Tao Ma
757055adc5 ocfs2/xattr: Only set buffer update if it doesn't exist in cache.
When we call ocfs2_init_xattr_bucket, we deem that the new buffer head
will be written to disk immediately, so we just use sb_getblk. But in
some cases the buffer may have already been in ocfs2 uptodate cache,
so we only call ocfs2_set_buffer_uptodate if the buffer head isn't
in the cache.

Signed-off-by: Tao Ma <tao.ma@oracle.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2009-01-05 08:34:18 -08:00
Tao Ma
1c32a2fd46 ocfs2/xattr: Remove additional bucket allocation in bucket defragment.
Joel has refactored xattr bucket and make xattr bucket a general
wrapper. So in ocfs2_defrag_xattr_bucket, we have already passed the
bucket in, so there is no need to allocate a new one and read it.

Signed-off-by: Tao Ma <tao.ma@oracle.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2009-01-05 08:34:18 -08:00
Joel Becker
02dbf38d19 ocfs2: Use buckets in ocfs2_xattr_set_entry_in_bucket().
The ocfs2_xattr_set_entry_in_bucket() function is already working on an
ocfs2_xattr_bucket structure, so let's use the bucket API.

Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2009-01-05 08:34:18 -08:00
Joel Becker
161d6f30f1 ocfs2: Use buckets in ocfs2_defrag_xattr_bucket().
Use the ocfs2_xattr_bucket abstraction for reading and writing the
bucket in ocfs2_defrag_xattr_bucket().

Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2009-01-05 08:34:18 -08:00
Joel Becker
178eeac354 ocfs2: Use buckets in ocfs2_xattr_create_index_block().
Use the ocfs2_xattr_bucket abstraction in
ocfs2_xattr_create_index_block() and its helpers.  We get more efficient
reads, a lot less buffer_head munging, and nicer code to boot.  While
we're at it, ocfs2_xattr_update_xattr_search() becomes void.

Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2009-01-05 08:34:18 -08:00