Commit Graph

360 Commits

Author SHA1 Message Date
Magnus Damm
1eca5c9272 sh: Add memory chunks to SH-Mobile UIO devices
This patch adds physically contiguous memory chunks to the UIO devices.
The same strategy can be used in the future for the CEU as well.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-07-28 18:10:35 +09:00
Magnus Damm
714750dd5c sh: Export sh7366 VPU, VEU(1), VEU(2) using uio_pdrv_genirq
This patch exports the VPU, VEU(1) and VEU(2) blocks of the sh7366
to user space using the uio_pdrv_genirq platform driver.

While at it, fix up the VEU(2) interrupt vector.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-07-28 18:10:34 +09:00
Magnus Damm
6874548c69 sh: Export sh7723 VPU, VEU2H0, VEU2H1 using uio_pdrv_genirq
This patch exports the VPU, VEU2H0 and VEU2H1 blocks of the sh7723
to user space using the uio_pdrv_genirq platform driver.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-07-28 18:10:34 +09:00
Magnus Damm
a55f6d2567 sh: Export sh7722 VPU and VEU using uio_pdrv_genirq
This patch exports the VPU and VEU blocks of the sh7722 to user space
using the uio_pdrv_genirq platform driver.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-07-28 18:10:34 +09:00
Magnus Damm
c901c96cc2 sh: Export sh7343 VPU and VEU using uio_pdrv_genirq
This patch exports the VPU and VEU blocks of the sh7343 to user space
using the uio_pdrv_genirq platform driver.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-07-28 18:10:34 +09:00
Yoshinori Sato
6e80f5e8c4 sh2(A) exception handler update
This patch is

By sh2
- Remove duplicate code
- Reduce stack usage
- Cleanup and little optimize

By sh2a
- Add missing handler(256 to 511)
- Use sh2a instructions handler

Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-07-28 18:10:34 +09:00
Yoshihiro Shimoda
a4e1d08491 sh: update sh7343 code
updated the following codes for SH7343:
 - add register_intc_controller()
 - add EARLY_SCIF_CONSOLE_PORT
 - add define of CPG register

Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-07-28 18:10:34 +09:00
Magnus Damm
0fff76f2da sh: add SuperH Mobile I2C platform data to sh7366
This patch adds platform data for the single I2C channel on sh7366.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-07-28 18:10:33 +09:00
Magnus Damm
da7d3029d1 sh: add SuperH Mobile I2C platform data to sh7723
This patch adds platform data for the single I2C channel on sh7723.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-07-28 18:10:33 +09:00
Magnus Damm
7549079d84 sh: add SuperH Mobile I2C platform data to sh7343
This patch adds platform data for two I2C channels to the sh7343.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-07-28 18:10:33 +09:00
Yoshihiro Shimoda
6bdfb22a8e sh: add interrupt ack code to sh4a
This patch is based on interrupt acknowledge code for external
interrupt sources on sh3 processors and adds on sh4a processors.

Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-07-28 18:10:33 +09:00
Paul Mundt
068f59143d sh: Record the major cut revision for probed SH-4A parts.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-07-28 18:10:32 +09:00
Stuart Menefy
3611ee7acc sh: Stub in silicon cut in CPU info.
Signed-off-by: Stuart Menefy <stuart.menefy@st.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-07-28 18:10:32 +09:00
Paul Mundt
ef9247ef89 sh: Tidy up the SH-3 exception vector table.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-07-28 18:10:32 +09:00
Yoshinori Sato
d88a3ea6fa SH7619 add ethernet controler support
- Add EtherC + PHY resource define.

Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-07-28 18:10:32 +09:00
Adrian Bunk
4c1cfab1e0 sh/kernel/ cleanups
This patch contains the following cleanups:
- make the following needlessly global code static:
  - cf-enabler.c: cf_init()
  - cpu/clock.c: __clk_enable()
  - cpu/clock.c: __clk_disable()
  - process_32.c: default_idle()
  - time_32.c: struct clocksource_sh
  - timers/timer-tmu.c: struct tmu_timer_ops
- remove the following unused functions (no CONFIG_BLK_DEV_FD on sh):
  - process_{32,64}.c: disable_hlt()
  - process_{32,64}.c: enable_hlt()

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-07-28 18:10:30 +09:00
Nobuhiro Iwamatsu
c63847a362 sh: Add SCIF2 support for SH7763.
SH7763 has 3 SCIF device. Current code supports SCIF0 and 1.
SCIF0 and 1 are same register constitution, but only SCIF2 is different.
I added support of SCIF2.

Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-07-28 18:10:29 +09:00
Yoshihiro Shimoda
b8858eed87 sh: add resource of USB host for SH7723
Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-06-09 16:04:13 +09:00
Nobuhiro Iwamatsu
5bde47bc63 sh: Fix compile error SH7763 setup code
SH7763's setup code use old DECLARE_INTC_DESC.
There was a compile error because of this.

Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-06-09 16:04:12 +09:00
Yusuke.Goda
576b91873f sh: Add SH7723 SCIF support
Signed-off-by: Yusuke Goda <goda.yusuke@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-06-09 16:04:12 +09:00
Adrian Bunk
2beb0e2893 sh/kernel/cpu/irq/intc-sh5.c build fix
This patch fixes the following build error caused by
commit a1dc4b59fa
(sh: intc_sh5 depends on cayman board for IRQ priority table.):

<--  snip  -->

...
  CC      arch/sh/kernel/cpu/irq/intc-sh5.o
/home/bunk/linux/kernel-2.6/git/linux-2.6/arch/sh/kernel/cpu/irq/intc-sh5.c: In function 'plat_irq_setup':
/home/bunk/linux/kernel-2.6/git/linux-2.6/arch/sh/kernel/cpu/irq/intc-sh5.c:257: error: expected declaration or statement at end of input
make[4]: *** [arch/sh/kernel/cpu/irq/intc-sh5.o] Error 1

<--  snip  -->

Reported-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-06-02 12:29:07 +09:00
Paul Mundt
9c28faaab1 sh: Drop broken URAM support on SH7723.
This was copied over from the previous MobileR bits, which doesn't
apply to R2. The URAM block on R2 is recycled for the L2 instead.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-05-26 11:45:45 +09:00
Magnus Damm
b76baf4cf5 sh: add probe support for new sh7723 cut
This patch adds support for sh7723 silicon with a prr value of 0x51.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-05-23 11:53:20 +09:00
Magnus Damm
7601304472 sh: fix VPU interrupt vector for sh7723
This patch fixes a VPU vector typo for sh7723. The correct value is 0x980,
the same as for sh7722.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-05-23 11:53:16 +09:00
Magnus Damm
526c1c23a2 sh: fix USBF resource for sh7722
The USBF function on sh7722 is currently not working with the m66592_udc
driver. The driver is using platform_get_resource_byname() so my commit
a0d29798e5 broke sh7722 support.

The long term fix is to replace platform_get_resource_byname() in the
driver with platform_get_resource(), but this helps until that happens.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-05-23 11:53:12 +09:00
Yoshihiro Shimoda
65b83427c6 sh: fix sh7785 master clock value
Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-05-16 14:55:07 +09:00
Roel Kluin
9731e287e0 SH: catch negative denormal_subf1() retval in denormal_add()
'ix' is unsigned but denormal_subf1() may return a negative int.

Signed-off-by: Roel Kluin <12o3l@tiscali.nl>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-05-09 20:05:10 +09:00
Magnus Damm
4370fe1c06 sh: intc register modify fix
Make sure register modifications stay atomic. Fixes processors with
shared priority register masking. Dual bitmap masking is unaffected.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-05-08 19:52:07 +09:00
Magnus Damm
720be99006 sh: no high level trigger on some sh3 cpus
The processor models sh7706, sh7707 and sh7709 don't support high
level trigger sense configuration. And the intc code looks like
crap these days so what's the difference.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-05-08 19:52:06 +09:00
Magnus Damm
995d538a5b sh: clean up sh7710 and sh7720 intc tables
Clean up the intc tables by removing unneeded #ifdefs. The vector
list is what selects which interrupt sources that should be added,
having unsupported bitfields listed is ok as long as the vector
is excluded from the list.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-05-08 19:52:04 +09:00
Magnus Damm
d58876e289 sh: add interrupt ack code to sh3
This patch adds interrupt acknowledge code for external interrupt
sources on sh3 processors. Only really required for edge triggered
interrupts, but we ack regardless of sense configuration.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-05-08 19:52:03 +09:00
Magnus Damm
a276e588a9 sh: unify external irq pin code for sh3
This patch unifies the sh3 external irq pin code. It buys us some
savings with reduced code redundancy, but the main feature with
this change is irq sense selection support for all sh3 processors.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-05-08 19:52:00 +09:00
Magnus Damm
65c07d4b3d sh: fix sh7705 interrupt vector typo
Fix sh7705 interrupt sources for vectors 0xc80 and 0xca0.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-05-08 19:51:48 +09:00
Paul Mundt
a1dc4b59fa sh: intc_sh5 depends on cayman board for IRQ priority table.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-05-08 19:51:43 +09:00
Paul Mundt
2a6b8148c0 sh64: Setup I/D-TLB defaults in SH-5 probe path.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-05-08 19:51:38 +09:00
Paul Mundt
ccd8058741 sh64: Fixup the nommu build.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-05-08 19:51:37 +09:00
Paul Mundt
440fc172ae sh: Fix up L2 cache probe.
SH7723 is the first hard silicon to implement the L2, and unsurprisingly,
does the precise inverse of what the specification alleges. XOR the
URAM/L2 size bits to get back in line with the existing parsing logic.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-04-18 09:50:07 -07:00
Paul Mundt
e5a4c65bef sh: Fix up SH-4A part probe.
The SH-4A series probe we were relying on doesn't work any more on the
newer parts, bump this up to use CVR.CHIP instead so we have consistent
behaviour across all of the parts, which is what this should have been
testing in the first place.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-04-18 09:50:07 -07:00
Paul Mundt
178dd0cd28 sh: Add support for SH7723 CPU subtype.
This adds basic support for the SH7723 MobileR2 CPU.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-04-18 09:50:07 -07:00
Paul Mundt
47aa8f493f sh: Fix up SH7763 build.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-04-18 09:50:06 -07:00
Magnus Damm
ef1b2327d2 sh: Add I2C platform data to sh7722
Add platform data for the SuperH Mobile I2C block to sh7722.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-04-18 09:50:06 -07:00
Magnus Damm
a0d29798e5 sh: Use physical addresses for sh7722 USBF resources
Use physical addresses and change resource name to follow data sheet.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-04-18 09:50:03 -07:00
Paul Mundt
2163b4cb01 sh: Hook up the rest of the SH7770 serial ports.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-04-18 09:50:02 -07:00
Paul Mundt
2ad699080b sh: Initial support for the MX-G CPU.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-04-18 09:50:01 -07:00
Paul Mundt
9bbafce2ee sh: Fix occasional FPU register corruption under preempt.
Presently with preempt enabled there's the possibility to be preempted
after the TIF_USEDFPU test and the register save, leading to bogus
state post-__switch_to(). Use an explicit preempt_disable()/enable()
pair around unlazy_fpu()/clear_fpu() to avoid this. Follows the x86
change.

Reported-by: Takuo Koguchi <takuo.koguchi.sw@hitachi.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-03-26 19:02:47 +09:00
Kieran Bingham
6c0602b8dd sh: Fix up the address error exception handler for SH-2.
Presently the SH-2/SH-2A address error exception dispatch copies off the
register state from the stack and skips over the first register, skewing
the rest. Fix up the math here so that the proper register state is
handed down to the exception handler itself.

Signed-off-by: Kieran Bingham <kbingham@mpc-data.co.uk>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-03-13 19:43:07 +09:00
Paul Mundt
b2839ed83f sh: Fix up section mismatches.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-03-06 12:43:38 +09:00
Harvey Harrison
866e6b9e50 sh: replace remaining __FUNCTION__ occurrences
__FUNCTION__ is gcc-specific, use __func__

Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-03-06 11:18:22 +09:00
Paul Mundt
96de1a8f02 serial: Move asm-sh/sci.h to linux/serial_sci.h.
This header is needed on other architectures as well (namely h8300),
which currently fails to build without this in place. Rather than
duplicating the port definition completely there, just move this to a
common location instead.

This should get h8300 working again for 2.6.25, in addition to the
changes already pushed by Sato-san in -rc2.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-02-26 14:52:45 +09:00
Rafael Ignacio Zurita
b7fd095602 sh: fix rtc_resources setup for sh770x
Fix the RTC resources setup for sh770x. Whit these proper
start values RTC driver (drivers/rtc/rtc-sh.c) works.

Signed-off-by: Rafael Ignacio Zurita <rizurita@yahoo.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-02-26 14:08:29 +09:00
Tobias Klauser
4377e605e0 sh: Storage class should be before const qualifier
The C99 specification states in section 6.11.5:

The placement of a storage-class specifier other than at the
beginning of the declaration specifiers in a declaration is an
obsolescent feature.

Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-02-26 14:04:17 +09:00
Paul Mundt
cc645a0205 sh: Rename SH-3 CCR3 reg to avoid synclink_cs clash.
drivers/char/pcmcia/synclink_cs.c:284:1: warning: "CCR3" redefined
In file included from include/asm/cache.h:13,
                 from include/asm/processor_32.h:15,
                 from include/asm/processor.h:60,
                 from include/linux/prefetch.h:14,
                 from include/linux/list.h:8,
                 from include/linux/module.h:9,
                 from drivers/char/pcmcia/synclink_cs.c:38:
include/asm/cpu/cache.h:38:1: warning: this is the location of the previous definition

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-02-25 18:49:44 +09:00
Paul Mundt
38350e0a00 sh: Get SH-5 caches working again post-unification.
A number of cleanups to get the SH-5 cache management code in line with
the rest of the SH backend.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-02-14 14:22:12 +09:00
Paul Mundt
43081e1833 sh: Shut up some trivial build warnings.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-02-14 14:22:11 +09:00
Magnus Damm
9109a30e5a sh: add support for sh7366 processor
This patch adds sh7366 cpu supports. Just the most basic things like interrupt
controller, clocks and serial port are included at this point.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-02-14 14:22:10 +09:00
Magnus Damm
d847afe7d4 sh: remove maskreg irq code
This patch removes the maskreg irq code since it is not in use anymore.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-02-14 14:22:10 +09:00
Magnus Damm
1cfb629cfa sh: add probe support for new sh7722 cut
This patch adds support for sh7722 devices with prr value 0xa1.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-02-14 14:22:07 +09:00
Alexey Dobriyan
25478445c4 Fix container_of() usage
Using "attr" twice is not OK, because it effectively prohibits such
container_of() on variables not named "attr".

Signed-off-by: Alexey Dobriyan <adobriyan@sw.ru>
Acked-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-08 09:22:32 -08:00
Yoshihiro Shimoda
4bb70b84bf sh: Add OHCI and UDC platform devices for SH7720.
Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-01-28 13:19:03 +09:00
Magnus Damm
7f3edee81f sh: intc - remove default interrupt priority tables
This patch removes interrupt priority tables from the intc code.
Optimal priority assignment varies with embedded application anyway,
so keeping the interrupt priority tables together with cpu-specific
code doesn't make sense.

The function intc_set_priority() should be used instead to set the
desired interrupt priority level.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-01-28 13:19:02 +09:00
Andrew Murray
c3aa92afd0 sh: sh7712 clock support
This patch provides specific clock support for the SH7712.

Signed-off-by: Andrew Murray <amurray@mpc-data.co.uk>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-01-28 13:19:02 +09:00
Yoshihiro Shimoda
7d740a066f sh: Add support for SH7763 CPU subtype.
Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-01-28 13:19:02 +09:00
Yoshihiro Shimoda
31a49c4bf8 sh: Add support for SH7721 CPU subtype.
Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-01-28 13:19:02 +09:00
Paul Mundt
cd01204b82 sh: Encode L1/L2 cache shape in auxvt.
This adds in the L1I/L1D/L2 cache shape support to their respective
entries in the ELF auxvt, based on the Alpha implementation. We use
this on the userspace libc side for calculating a tightly packed
SHMLBA amongst other things.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-01-28 13:18:59 +09:00
Stuart Menefy
c8c0a1aba9 sh: Support denormalization on SH-4 FPU.
Signed-off-by: Stuart Menefy <stuart.menefy@st.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-01-28 13:18:59 +09:00
Stuart Menefy
cbaa118ecf sh: Preparation for uncached jumps through PMB.
Presently most of the 29-bit physical parts do P1/P2 segmentation
with a 1:1 cached/uncached mapping, jumping between the two to
control the caching behaviour. This provides the basic infrastructure
to maintain this behaviour on 32-bit physical parts that don't map
P1/P2 at all, using a shiny new linker section and corresponding
fixmap entry.

Signed-off-by: Stuart Menefy <stuart.menefy@st.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-01-28 13:18:59 +09:00
Stuart Menefy
1efe4ce3ca sh: GUSA atomic rollback support.
This implements kernel-level atomic rollback built on top of gUSA,
as an alternative non-IRQ based atomicity method. This is generally
a faster method for platforms that are lacking the LL/SC pairs that
SH-4A and later use, and is only supportable on legacy cores.

Signed-off-by: Stuart Menefy <stuart.menefy@st.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-01-28 13:18:58 +09:00
Paul Mundt
a23ba43573 sh: comment tidying for sh64->sh migration.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-01-28 13:18:58 +09:00
Paul Mundt
4b27c47cf8 sh: syscall auditing for sh5, too.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-01-28 13:18:58 +09:00
Paul Mundt
74d99a5e26 sh: SH-2A FPU support.
Signed-off-by: Kieran Bingham <kbingham@mpc-data.co.uk>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-01-28 13:18:57 +09:00
Paul Mundt
a8f67f4b4d sh: Add SH7263 CPU support.
This adds support for the SH7263 (SH-2A) CPU.

This particular CPU is a superset of SH7203, adding some additional
peripheral blocks and hooking up additional (reserved on SH7203)
vectors in the INTC block.

No visibly nasty surprises, yet..

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-01-28 13:18:57 +09:00
Paul Mundt
6d01f51086 sh: Add SH7203 CPU support.
This adds support for the SH7203 (SH-2A) CPU.

Signed-off-by: Kieran Bingham <kbingham@mpc-data.co.uk>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-01-28 13:18:57 +09:00
Paul Mundt
332fd57b92 sh: Bring the SH-5 FPU in line with the SH-4 FPU API.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-01-28 13:18:55 +09:00
Paul Mundt
18bc81319b sh: Get the mach-cayman IRQ support building.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-01-28 13:18:54 +09:00
Paul Mundt
36763b22be sh: Switch SH-5 to use CONFIG_PAGE_OFFSET.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-01-28 13:18:51 +09:00
Paul Mundt
e88ed82ef8 sh: Stub in CPU subtype setup code for SH5-101/103.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-01-28 13:18:50 +09:00
Paul Mundt
d183913609 sh: Plug in simple SH-5 subtype probing.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-01-28 13:18:50 +09:00
Paul Mundt
92b59258b8 sh: Kill off do_NMI stub in SH-5 ex table.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-01-28 13:18:50 +09:00
Paul Mundt
5a4f7c66be sh: Share bug/debug traps across _32 and _64.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-01-28 13:18:50 +09:00
Paul Mundt
600ee240d1 sh: Move over and enable FPU support for SH-5.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-01-28 13:18:48 +09:00
Paul Mundt
7cfee5ac3e sh: Move over sh64 switch_to and stack unwinder.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-01-28 13:18:47 +09:00
Paul Mundt
343ac72248 sh: Move over the SH-5 entry.S.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-01-28 13:18:46 +09:00
Paul Mundt
27a511c6f3 sh: Disable initial cache flush on SH-5.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-01-28 13:18:43 +09:00
Paul Mundt
c881cbc033 sh: Don't reference UBC code in CPU init on sh64.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-01-28 13:18:43 +09:00
Paul Mundt
cc8eae7f51 sh: imask IRQ depends on sh32.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-01-28 13:18:43 +09:00
Greg Kroah-Hartman
38a382ae5d Kobject: convert arch/* from kobject_unregister() to kobject_put()
There is no need for kobject_unregister() anymore, thanks to Kay's
kobject cleanup changes, so replace all instances of it with
kobject_put().


Cc: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-01-24 20:40:39 -08:00
Greg Kroah-Hartman
d48b335256 Kobject: change arch/sh/kernel/cpu/sh4/sq.c to use kobject_init_and_add
Stop using kobject_register, as this way we can control the sending of
the uevent properly, after everything is properly initialized.

Cc: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-01-24 20:40:29 -08:00
Paul Mundt
f966918724 sh: Kill off the remaining ST40 cruft.
The ST40 stuff in-tree hasn't built for some time, and hasn't been
updated for over 3 years. ST maintains their own out-of-tree changes
and rebases occasionally, and that's ultimately where all of the ST40
users go anyways.

In order for the ST40 code to be brought up to date most of the stuff
removed in this changeset would have to be rewritten anyways, so there's
very little benefit in keeping the remnants around either.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-11-07 11:13:55 +09:00
Paul Mundt
96a8a0ba12 sh: Fix up kgdb-on-NMI branch target.
This was all reworked some time ago, the old debug_enter was ripped
out with everything going through a debug trap jump table instead.
Kill off the debug_enter target and reference kgdb_handle_exception
directly.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-11-07 11:13:55 +09:00
Paul Mundt
b2078fa221 sh: Kill off dead ipr_irq_demux().
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-10-31 15:17:03 +09:00
Yoshihiro Shimoda
262feaa08e sh: Add resource of USBF for SH7722.
Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-10-30 13:05:31 +09:00
Stuart Menefy
24eb17e081 sh: clkfwk: Support multi-level clock propagation.
Currently clock propagation only works for one level, but we have some
clocks which need to propagate multiple levels, so make this recursive.

Signed-off-by: Stuart Menefy <stuart.menefy@st.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-09-28 11:51:52 +09:00
Paul Mundt
675bd7804c sh: Fix URAM start address on SH7785.
Not all of the SH-X2 URAM blocks are mapped in the same place,
SH7785 happens to map it on the opposite end of the address space
from SH7722, correct the addresses.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-09-27 18:22:21 +09:00
Paul Mundt
cb7af21f7d sh: Use boot_cpu_data for CPU probe.
This moves off of smp_processor_id() and only sets the probe
information for the boot CPU directly. This will be copied out
for the secondaries, so there's no reason to do this each time.

This also allows for some header tidying.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-09-27 18:18:39 +09:00
Paul Mundt
f72abd0a4c sh: Fix plat_irq_setup_pins() for SH7785.
There was some debug code left in here that caused the pin changes
to never be hit. Kill that off, and all is well.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-09-27 16:45:46 +09:00
Paul Mundt
26fad19d8c sh: Disable L2 reporting for present URAM only parts.
The probing logic works for both URAM and L2, with no way to
distinguish between the two. Disable the probing for now and
let the CPU subtypes that have this in a real L2 configuration
explicitly say so.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-09-27 10:29:58 +09:00
Paul Mundt
1a442fe02d sh: Initial SH-X3 SMP support.
This adds basic support for SH-X3 SMP (4 CPUs).

More IPI and cache debugging is necessary, mostly interfacing the
d-cache coherency and the I-cache broadcast invalidates. Only for
testing at present!

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-09-21 19:16:05 +09:00
Magnus Damm
ceb9b97451 sh: Hook up the SH-X3 SMP intc register groups.
Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-09-21 18:34:48 +09:00
Paul Mundt
aba1030a7e sh: Bring SMP support back from the dead.
There was a very preliminary bunch of SMP code scattered around for the
SH7604 microcontrollers from way back when, and it has mostly suffered
bitrot since then. With the tree already having been slowly getting
prepped for SMP, this plugs in most of the remaining platform-independent
bits.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-09-21 18:32:32 +09:00
Magnus Damm
f18d533e3c sh: intc - initial SMP support.
This implements initial support for the SMP INTC (particularly
INTC2) controllers.

These are largely implemented as conventional blocks, with
register sets grouped together at fixed strides relative to
the CPU id.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-09-21 18:16:42 +09:00
Paul Mundt
db2504966c sh: Wire up URAM node on SH7785.
Add SH7785 URAM as node 1, follows the SH-X3 change.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-09-21 11:57:55 +09:00
Paul Mundt
35f3abe976 sh: INTC stubs for SH7343 and SH7770 builds.
Get the SH7343 and SH7770 stuff linking again. Both of these still
require proper INTC support.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-09-21 11:57:53 +09:00
Magnus Damm
953c8ef250 sh: intc - irl mode update for sh7780 and sh7785
This patch contains the following fixes and improvements:
- Fix address typo for INTMSK2 / INTMSKCLR2 registers on sh7780.
- Adds IRQ_MODE_IRLnnnn_MASK using intc controller for IRL masking.
- Good old IRQ_MODE_IRLnnnn should not register any intc controller.
- plat_irq_setup_pins() now selects IRL or IRQ mode.
- the holding function is now disabled using ICR0.

By default all external pin interrupts are disabled.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-09-21 11:57:51 +09:00
Magnus Damm
1254d1db11 sh: remove CONFIG_CPU_HAS_INTC_IRQ
All processor specific interrupt code is now converted to make use
of the new intc code. The config option CONFIG_CPU_HAS_INTC_IRQ is
because of that pointless.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-09-21 11:57:51 +09:00
Paul Mundt
b05d1865b4 sh: Kill off volatile silliness in sq_flush_range().
CC      arch/sh/kernel/cpu/sh4/sq.o
arch/sh/kernel/cpu/sh4/sq.c: In function 'sq_flush_range':
arch/sh/kernel/cpu/sh4/sq.c:65: warning: passing argument 1 of 'prefetch' discards qualifiers from pointer target type

This didn't actually need to be volatile in the first place, so just
kill off the qualifier entirely.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-09-21 11:57:51 +09:00
Magnus Damm
2eb0303c2c sh: intc - add support for sh7206
This patch converts the cpu specific interrupt setup code for sh7206
from ipr to intc. New vectors are also added to match the information
provided by the datasheet.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-09-21 11:57:50 +09:00
Magnus Damm
0dc3fc04dd sh: intc - add support for sh7619
This patch converts the cpu specific interrupt setup code for sh7619
from ipr to intc. New vectors are also added to match the information
provided by the datasheet.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-09-21 11:57:50 +09:00
Magnus Damm
c4773bc2a0 sh: fix irqs for the second serial port on sh7206
This patch makes sure the serial port interrupt irqs matches the
datasheet.  Only irqs for SCIF1 are changed. While at some cosmetic
spaces are added.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-09-21 11:57:50 +09:00
Magnus Damm
3d37d94e5a sh: intc - primary priority masking fixes
This patch contains various intc fixes for problems reported by
Markus Brunner on the linuxsh-dev mailing list:

http://marc.info/?l=linuxsh-dev&m=118701948224991&w=1

Apart from added comments, the fixes are:

- add intc_set_priority() function prototype to hw_irq.h
- fix off-by-one error in intc_set_priority()
- make sure _INTC_WIDTH() is set for primary priority masking

Big thanks to Markus for finding these problems. Version two fixes
a compile error and an inverted primary check.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Acked-by: Markus Brunner <super.firetwister@gmail.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-09-21 11:57:50 +09:00
Magnus Damm
5c37e02535 sh: intc - mark data structures as __initdata
With the intc core improved it is now possible to put the intc data
structures in the initdata section.

Version two of this patch puts the __initdata inside DECLARE_INTC_DESC()
and removes the __initdata included in the board specific r2d code.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-09-21 11:57:50 +09:00
Magnus Damm
46420e49c9 sh: x3 - add ipi vectors
With the intc dual prio register support in place it is now possible
to add the ipi vectors to x3.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-09-21 11:57:50 +09:00
Magnus Damm
73505b445d sh: intc - rework core code
This patch reworks the intc core, implementing the following features:

- Support dual priority registers - one set and one clear register
- All 8/16/32 bit register combinations are now supported
- Both single mask and single enable bitmap register are supported
- Add code to set interrupt priority
- Speedup sense and priority configuration code
- Allocate data using bootmem, allows intc data structures to be
  __initdata
- Save memory - allocated memory footprint is smaller than intc
  structures

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-09-21 11:57:50 +09:00
Magnus Damm
6ef5fb2cfc sh: intc - add a clear register to struct intc_prio_reg
We need a secondary register member in struct intc_prio_reg to support
dual priority registers used by ipi on x3.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-09-21 11:57:49 +09:00
Magnus Damm
d6aee69ca1 sh: x3 - fix setup_bootmem_node() compile error with shx3_defconfig
This makes sure the function prototype for setup_bootmem_node() gets
included. The file setup-shx3.c does not compile otherwise for
CONFIG_NUMA=n.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-09-21 11:57:49 +09:00
Markus Brunner
3ea6bc3de4 sh: Add SH7720 CPU support.
This adds support for the SH7720 (SH3-DSP) CPU.

Signed-off by: Markus Brunner <super.firetwister@gmail.com>
Signed-off by: Mark Jonas <toertel@gmail.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-09-21 11:57:49 +09:00
Paul Mundt
d3428e9101 sh: Wire up CSM node for SH-X3.
Now that NODES_SHIFT is bumped up, we can plug in the CSM block as
a separate node, too.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-09-21 11:57:49 +09:00
Paul Mundt
6d64d4256c sh: intc: Fix sense regs oops for IRL IRQs.
IRL doesn't always define sense registers, so don't bother trying to
iterate through the table. This ended up causing an oops on SH-X3
when using IRL mode.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-09-21 11:57:48 +09:00
Magnus Damm
96290d808f sh: remove intc2 code
There is no point in keeping around the now unused intc2 code.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-09-21 11:57:48 +09:00
Magnus Damm
51da64264b sh: intc - add single bitmap register support
This patch adds single bitmap register support to intc. The current
code only handles 16 and 32 bit registers where a set bit means
interrupt enabled, but this is easy to extend in the future.

The INTC_IRQ() macro is also added to provide a way to hook in
interrupt controllers for FPGAs in boards or companion chips.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-09-21 11:57:47 +09:00
Magnus Damm
2635e8558a sh: intc - remove redundant irq code for shmin
This patch removes redundant interrupt code for the shmin board which
is using a sh770x processor and 4 IRQ lines as individual interrupts
(IRQ-mode).

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-09-21 11:57:47 +09:00
Magnus Damm
d59645d6ba sh: intc - remove redundant irq code for sh03, snapgear and titan
This patch removes redundant board specific interrupt code for boards
using sh775x processors and 4 IRQ lines in "Individual Interrupt Mode"
aka IRLM.

Three boards are affected: sh03, snapgear and titan.

The right way to do this is to use cpu specific code provided by intc.
A nice side effect is that sh03 now compiles, board not BROKEN any more.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-09-21 11:57:47 +09:00
Paul Mundt
ad89f87a84 rtc: rtc-sh: Support 4-digit year on SH7705/SH7710/SH7712.
All SH-4 parts have a 4-digit year, while the SH-3 parts typically
only use a 2-digit one. The SH7705, SH7710, and SH7712 SH-3 parts
however opted to extend it to 4-digit and still look and act like
an SH-3 RTC in all other ways.

This adds a capability flag (RTC_CAP_4_DIGIT_YEAR) that these
corner-case CPU subtypes can set in their platform data and cleans
up some of the ifdef mess in the driver as a result.

Reported-by: Markus Brunner <super.firetwister@gmail.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-09-21 11:57:47 +09:00
Paul Mundt
7da3b8ef66 sh: Initial multiple-node support for SH-X3.
Wire up CPU#0 URAM as node 1 on SH-X3.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-09-21 11:57:47 +09:00
Magnus Damm
1ee010087e sh: intc - add support for x3
This patch converts the cpu specific interrupt setup code for x3 from
intc2 to intc. New vectors are also added to match the preliminary
information.

Use plat_irq_setup_pins() to select between IRQ and IRL mode for IRQ0-3.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-09-21 11:57:47 +09:00
Magnus Damm
137b53b71c sh: intc - fix IRQ4 and IRQ5 typo on sh3
The intc tables for sh3 currently contain a typo where the bit
fields in IPRD are mixed up for IRQ4 and IRQ5. This patch makes
sure the correct bit fields are used - all according to the
datasheets.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-09-21 11:57:47 +09:00
Magnus Damm
e29bfbc443 sh: intc - add support for SH7760
This patch converts the cpu specific interrupt setup code for sh7760
from ipr + intc2 to intc. New vectors are also added to match the
information provided by the datasheet.

Vectors for IRQ4-IRQ7 are enabled by default. Use plat_irq_setup_pins()
if pins IRL0-3 should be used in IRLM mode.

The patch also adds the SIM block to the serial port platform data.
Version two of this patch fixes MMCIF problems reported by Manuel Lauss.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Acked-by: Manuel Lauss <mano@roarinelk.homelinux.net>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-09-21 11:57:46 +09:00
Magnus Damm
a0e23267d4 sh: intc - add support for SH7785
This patch converts the cpu specific interrupt setup code for sh7785
from intc2 to intc. New vectors are also added to match the information
provided by the datasheet.

No IRQ/IRL pin vectors are enabled by default. Use plat_irq_setup_pins()
to select between IRL and IRQ mode.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-09-21 11:57:46 +09:00
Paul Mundt
e7bd34a15b sh: Support explicit L1 cache disabling.
This reworks the cache mode configuration in Kconfig, and allows for
explicit selection of write-back/write-through/off configurations.
All of the cache flushing routines are optimized away for the off
case.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-09-21 11:57:46 +09:00
Magnus Damm
ac919986d7 sh: intc - avoid SH7710 specific vector on SH7712
This patch makes sure that the sh7710 specific ipsec vector is missing
if building for a sh7712. All according to the datasheet.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-09-21 11:57:46 +09:00
Magnus Damm
1301e71562 sh: intc - add missing vectors for SH7707
This patch adds a few missing vectors for sh7707. The only interrupt
controller differences between sh7707 and sh7709 seem to be added
vectors for one LCD controller and two PCMCIA slots.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-09-21 11:57:46 +09:00
Magnus Damm
ec58f1f32d sh: intc - add support for SH7706, SH7707, SH7708, SH7709
This patch unifies the cpu specific interrupt setup code for
sh7706, sh7707, sh7708 and sh7709 and moves the code into a new
file called setup-sh770x.c.  It makes sense to share the setup code
between these processors because most hardware blocks are identical
from a software point of view. With this patch the sh770x processors
now have a complete set of vectors that match with the information
provided by the data sheets. This is a big improvement for sh7708.

Vectors for IRQ4 and IRQ5 are enabled by default. Use
plat_irq_setup_pins() if pins IRQ0-3 should be used in IRQ mode.

This patch also unifies the platform device setup code which means
that the rtc driver now has platform data for all sh770x processors.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-09-21 11:57:46 +09:00
Magnus Damm
28b146c84e sh: intc - add support for SH7710
This patch converts the cpu specific interrupt setup code
for sh7710 from ipr to intc. While at it new vectors are added
to match the information provided by the datasheet. Version two
simplifies the Kconfig part.

Vectors for IRQ4 and IRQ5 are enabled by default. Use
plat_irq_setup_pins() if pins IRQ0-3 should be used in IRQ mode.

This patch also adds sh7710 specific platform data for the rtc
driver. The base address of SCIF1 is adjusted to match the
datasheet.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-09-21 11:57:45 +09:00
Magnus Damm
70e8be0a4e sh: intc - add support for SH7705
This patch converts the cpu specific interrupt setup code for
sh7705 from ipr to intc. While at it new vectors are added to
match the information provided by the datasheet.

Vectors for IRQ4 and IRQ5 are enabled by default.

Use plat_irq_setup_pins() if pins IRQ0-3 should be used in IRQ mode.

This patch also adds sh7705 specific platform data for the rtc driver.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-09-21 11:57:45 +09:00
Magnus Damm
b58d134c7f sh: missing symbol fix for sh4-202
This patch adds a plat_irq_setup() symbol for sh4-202. Without
this fix it is impossible to build a working kernel using the
microdev_defconfig.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-08-22 13:32:07 +09:00
Paul Mundt
c347d12cd1 sh: Fix lockdep debugging oops on SH-3/4.
In the SH-3/4 TLB access violation path we were enabling IRQs before
the call in to trace_hardirqs_on(), which ended up triggering:

        if (DEBUG_LOCKS_WARN_ON(!irqs_disabled()))
                return;

in kernel/lockdep.c:2031. Fix this up by removing the early re-enable,
we were already re-enabling IRQs post-trace_hardirqs_on() already, so
the semantics are now as was initially intended.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-08-01 16:17:07 +09:00
Magnus Damm
d89ddd1c84 sh: remove support for sh7300 and solution engine 7300
This patch removes old dead code:
- kill off sh7300 cpu support
- get rid of broken solution engine 7300 board support

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-07-26 15:37:57 +09:00
Paul Mundt
b067c50a7f sh: Silence sq compile warning on sh4 nommu.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-07-26 15:35:17 +09:00
Magnus Damm
870e8a2438 sh: remove support for sh73180 and solution engine 73180
This patch removes old dead code:
- kill off sh73180 cpu support
- get rid of broken solution engine 73180 board support

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-07-25 10:49:21 +09:00
Magnus Damm
347b9bdddb sh: remove old broken pint code
The code in arch/sh/kernel/cpu/irq/pint.c doesn't compile, so let's
get rid of it to make space for a future pint implementation on top
of intc.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-07-25 10:46:32 +09:00
Magnus Damm
56386f6424 sh: intc - add support for SH7750 and its variants
This patch converts the cpu specific 7750 setup code to use the
new intc controller. Many new vectors are added and multiple
processor variants including 7091, 7750, 7750s, 7750r, 7751 and
7751r should all have the correct vectors hooked up.

IRLM interrupts can be enabled using ipr_irq_enable_irlm() which
now is marked as __init.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-07-20 18:44:49 +09:00
Paul Mundt
fe04d7798f sh: Support rate rounding for SH7722 FRQCR clocks.
Now that the round_rate() op is supported, hook it up on SH7722
for the FRQCR (CPU, PCLK, etc.) clocks.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-07-20 13:30:07 +09:00
Paul Mundt
f6991b0456 sh: Implement clk_round_rate() in the clock framework.
This is an optional component of the clock framework. However,
as we're going to be using this in the cpufreq drivers, add
support for it to the framework.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-07-20 13:29:09 +09:00
Magnus Damm
39c7aa9ea9 sh: intc - add support for 7780
This patch converts the cpu specific 7780 setup code to use the
new intc controller. Many new vectors are added and also support for
external interrupt sense configuration. So with this patch it is now
possible to configure external interrupt pins as edge or level
triggered using set_irq_type().

No external interrupts are registered by default.
Use plat_irq_setup_pins() to select between IRQ or IRL mode.

This patch also fixes the Alarm IRQ for the RTC.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-07-20 12:18:21 +09:00
Magnus Damm
680c45981a sh: intc - improve group support
This patch improves intc group support, ie it makes it possible to
group interrupts together and mask / unmask the entire group. This
also works with priorities, so setting a priority for an entire group
is also possible. This patch is needed to properly support certain
processors such as the 7780.

Fixes for NULL pointers in DECLARE_INTC_DESC() are also included.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-07-20 12:18:21 +09:00
Magnus Damm
90015c8938 sh: IPR/INTC2 IRQ setup consolidation.
This patch unifies the cpu specific interrupt setup functions for
interrupt controller blocks such as ipr, intc2 and intc. There is no
point in having separate functions for each interrupt controller, so
let's clean this up.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-07-20 12:18:20 +09:00
Magnus Damm
1b06428ee5 sh: intc - add support for 7722 processor
This patch converts the cpu specific 7722 setup code to use the
new intc controller. Many new vectors are added and also support
for external interrupt sense configuration. So with this patch
it is now possible to configure external interrupt pins as edge
or level triggered using set_irq_type().

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-07-20 12:18:20 +09:00
Magnus Damm
02ab3f7079 sh: intc - shared IPR and INTC2 controller
This is the second version of the shared interrupt controller patch
for the sh architecture, fixing up handling of intc_reg_fns[].

The three main advantages with this controller over the existing
ones are:

	- Both priority (ipr) and bitmap (intc2) registers are
	  supported
	- External pin sense configuration is supported, ie edge
	  vs level triggered
	- CPU/Board specific code maps 1:1 with datasheet for
	  easy verification

This controller can easily coexist with the current IPR and INTC2
controllers, but the idea is that CPUs/Boards should be moved over
to this controller over time so we have a single code base to
maintain.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-07-20 12:18:20 +09:00
Magnus Damm
53aba19f82 sh: Fix irq assignment for uarts on sh7722
This patch contains two serial port related fixes for sh7722:
- Make sure the irqs for the first serial port is correct
- Add the second and third serial port to the platform data

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-07-20 12:18:20 +09:00
Paul Mundt
20c2df83d2 mm: Remove slab destructors from kmem_cache_create().
Slab destructors were no longer supported after Christoph's
c59def9f22 change. They've been
BUGs for both slab and slub, and slob never supported them
either.

This rips out support for the dtor pointer from kmem_cache_create()
completely and fixes up every single callsite in the kernel (there were
about 224, not including the slab allocator definitions themselves,
or the documentation references).

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-07-20 10:11:58 +09:00
Kristoffer Ericson
e509ac4bbc sh: sh-rtc support for SH7709.
Signed-off-by: Kristoffer Ericson <kristoffer.ericson@gmail.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-07-16 09:51:39 +09:00