Abstract the callback hdd_softap_ipa_start_xmit by
hdd_softap_ipa_start_xmit, to match the return type of
wlan_ipa_softap_xmit pointer, to fix a CFI failure.
Change-Id: If1cb1a80801558d5c7831ec89ad5281b0bbe36f3
The request_firmware() will take too long time(60s) when the
requested fw file do not exist. Replace this API with
request_firmware_direct.
Change-Id: Ie40db69a24dc1e0b86f140ca1aad91bd3b10e95e
CRs-Fixed: 2435125
A VHT beamformee shall indicate the maximum number of space-time
streams it can receive in a VHT NDP in the Beamformee STS
Capability subfield of the VHT Capabilities Information field of
the VHT Capabilities element. The SAP is advertising STS value
as 8 in both 2G and 5G band. This may cause IOT issues.
Fix the default value of beamformee STS capability value as
default value 3 for SAP.
Change-Id: I026eabeea941a33f1ffab6e498e6de90e182320e
CRs-Fixed: 2448390
Implement the interface to transfer the info between
host driver and firmware about the ap which has interop
issues with the DUT. It is detected by firmware and
forwarded to user sapce for persistent storage. And
user space configs these APs to firmware when the DUT
starts up next time.
CRs-Fixed: 2425202
Change-Id: I2e828d521f0e04862a01fa1c90626f51b7f65796
Host need to fill netbuf with qtime instead of tsf. So
host need to add tsf64 enable/disable related functions
and definitions to sync with FW.
The tsf64_time is new added to fw/host structure, so host
need to add parse functions to get tsf64_time from tx_desc.
Change-Id: Ieea0d8f905eb57629d279f8da0e811857b760b1f
CRs-Fixed: 2444456
The ini param oce_sta_enable is getting read before parsing the
ini conf file, to set few OCE related wiphy flags. None of these
flags are getting set as it is resulting 0.
Move this to an API after parsing the ini file.
Change-Id: Ibf61996da4cc6b69892a5f2fe325b42c39f5fce3
CRs-Fixed: 2449519
Userspace request driver to report details of each beacon
received whose bssid is same as currently connected BSS's
mac address. The driver encapsulates the details of these
beacons as an asynchronous event within vendor command:
QCA_NL80211_VENDOR_SUBCMD_BEACON_REPORTING with operation
type QCA_WLAN_VENDOR_BEACON_REPORTING_OP_STOP until
userspace requests to stop sending beacons.
When driver gets stop indication from userspace, it does
the following things:
1. De-register all callback which is registered while handling
start indication
2. Add beacon filter and send it to fw
If driver is in WOW mode and WMI_ADD_BCN_FILTER_CMDID is
NOT configured, fw wakeup HOST and sends connected AP beacon.
Fw should not wakeup host if host is in wow mode. In order
to support this, configure WOW_BEACON_EVENT for STA and P2P.
Change-Id: Ie7c768fa957d02e1361e1ecb95435ba3f06034b0
CRs-Fixed: 2431360
Read mcc to scc INI to enforce SCC when starting GO in multi
concurrency scenario such as STA+GO.
Change-Id: Iba276cc0afd97119651a12bbefefaccadfc6c500
CRs-Fixed: 2456452
Host need to fill netbuf with qtime instead of tsf. So host first
need to set enable_ppdu_end to 1, so that FW will pass ppdu_end
contents to host, and host can translate tsf64_time into qtime.
The tsf64_time is new added to fw struture, so host will need
add it accordingly to struct hdd_adapter, and keep it updated
in time synchronization function <hdd_update_timestamp>.
Change-Id: Ib19ac1411c4e17624c012f188297c9f2122642d2
CRs-Fixed: 2444456
All INI configuration about modules log level which removed in
previous change "Change-Id: I9c519cf2509e3dc22282f0c7ea6f52cbd2913ccd",
add one INI item for log level of all modules.
Change-Id: Icaedb6bd61a18a81cea9e75e076fe64b11e5bde0
CRs-Fixed: 2442788
TDLS is disabled if second connection comes up.
If that second connection fails then enable
the TDLS again.
Change-Id: Id5df1df81c94bcf3a0616bbfb4b33f3e4d81dcbe
CRs-Fixed: 2445831
Change I9d29c141106db479039789d67c45a455e96a118b introduced a WAR for
a BT coex issue. Now that an updated version of HW is available that
does not need the WAR, only apply the WAR if the hardware version
requires it.
Change-Id: Id204163e81a802d16f1a9ffc78bbfcf2549c7dfb
CRs-Fixed: 2437433
In function hdd_hostapd_sap_event_cb() there are variables that are
defined in the stack. This can cause stack overflow in certain cases.
Change the declaration of the variables to dynamic memory allocation.
Change-Id: Ic8dca63c57110a92f19a438b2ea9c7ab9936af97
CRs-Fixed: 2446590
Action OUI entry in gActionOUIConnect1x1 which was added as a part of
Idc0f3238e3521bb20c592b44de77216125e69504 was missed in the ini
convergence I6984096719a5abd7fa4f0a4f6641a17d29348332.
To fix this, add action_oui entry "001018 06 02FF009C0000 BC 25 48"
in gActionOUIConnect1x1.
Change-Id: Id8dcf2a21409bedbaecd0ab72ecca8d44a622c86
CRs-Fixed: 2452506
For RX DPTRACE, we assume skb->data points to start of ethernet
header. In IPA RX exception path, DPTRACE is put after
eth_type_trans and eth_type_trans removes ethernet header from
skb->data. Thus move IPA RX DPTRACE before eth_type_trans.
Change-Id: I4d1a60292db43964fe08f591f0ee4b14e55ca4d3
CRs-Fixed: 2451155
Currently, there is no information for roam reason
in hdd.
Fix, Handle roam reason recived from csr, print roam
reason and add roam reason in roam auth event.
Change-Id: Ib9188cb443fa81307fe23d73cce09f7c23bc7a41
CRs-Fixed: 2425910
wlan_hdd_try_disconnect should wait for LFR 2.0 based roaming
sequence to complete before triggering disconnect to avoid
potential race conditions.
Change-Id: Ib5ee542350fb8c375bb3629f5437bc37cc79dbb7
CRs-Fixed: 2434842
Add changes to configure params for RX softirq time limit feature via
INI file.
Change-Id: I714a64e3d4ba7f094a81b4d11dab9bc63c7ee2de
CRs-Fixed: 2423622
Presently osif tdls memory is freed as part of the osif_priv
when the vdev is logically destroyed. There is case seen
wherein the tdls is holding vdev reference and in the other
thread the interface down is received and the osif_priv is
freed resulting in the tdls osif priv also, if the other thread
tries to dereference the tdls os priv it will result
null pointer exception.
Move the tdls osif priv memory creation/deletion to the tdls component.
Change-Id: I3782f6304bee5a6eaab4d9122a569ba56fd29947
CRs-Fixed: 2436379
Currently, SAP channel switch is failed if the BW given
is 40Mhz on channel 165. But for some country's like IN
BW 40Mhz can be used. Hence allow the SAP on channel 165
with BW 40Mhz
Change-Id: I89a023d52d9a52e342b3e08e37ad20aec65db1a6
CRs-Fixed: 2447398
If FW does not support WMI_SERVICE_DUAL_BEACON_ON_SINGLE_MAC_MCC_SUPPORT,
in AP+AP case start the second SAP on same band and
different channel will be failed.
For force mcc to scc switch enabled case, override the second AP's
chan to same chan of first AP instead of return failed in start AP.
Change-Id: I83ad3db3160cfc2dd66163bb1e1b2e19ae7c5fa3
CRs-Fixed: 2439440
When SSR is in progress, OBSS vendor scan request is rejected with
reason code -EAGAIN, but hostapd doesn't consider this reason code
and resulting in the failure of hotspot start.
To fix this, return error code -EBUSY which makes hostapd to reissue
OBSS scan.
Change-Id: I71119f542011aebece5692347ceb99f4a65decef
CRs-Fixed: 2443341
Cleanup sme_scan_flush_result and csr_scan_flush_result to
use ucfg_scan_flush_results API to flush scan results.
Change-Id: If4ee6c56662d8b214c3b15325a5aef83c449d7c0
CRs-Fixed: 2450775
Serialize psoc interface inactivity idle shutdown and restart via PLD
such that platfrom driver can serialize psoc idle shutdown and restart
to driver unload and SSR events to avoid any race conditions.
Change-Id: Ibac40158ad5b94468b09c53eaf7f3d9a3cb8badf
CRs-Fixed: 2430868
If firmware starts off-channel scan, driver does not
receive beacons. In this case driver should send a
pause event to userspace.
Change-Id: I90ba5c586656486df110778b73b236e5877f8684
CRs-Fixed: 2431359
Once driver gets QCA_NL80211_VENDOR_SUBCMD_BEACON_REPORTING vendor
command with an attribute for start, firmware sends all
beacons to host for the connected peer. Host extract required info
(SSID, BSSID, Channel number, Beacon Interval, Timestamp, System
timestamp) from incoming beacon for connected AP and sends it to
userspace. Userspace needs this data for WIPS.
Change-Id: I9d6dd068a076bda79881043946be3133ee87fe84
CRs-Fixed: 2431354
Add new vendor cmd : QCA_NL80211_VENDOR_SUBCMD_BEACON_REPORTING.
This subcommand is used to implement asynchronous beacon
reporting feature. Userspace can request driver/firmware to
report details of each beacon received whose bssid is same as
currently connected BSS's mac address. The driver will encapsulate
the details of these beacons as an asynchronous event within this
command id until userspace requests to stop sending beacons.
Change-Id: I9a32fe5431767b077983c7db90a2f825709f368c
CRs-Fixed: 2431351
Add support to pass scan priority to override the def scan priority
for cfg initiated scan.
Change-Id: I454c2667d1814d96fbb611e6ecbb90d4154ec9b5
CRs-Fixed: 2449730
While processing vendor command WIFI_TEST_CONFIG_TWT_SETUP,
in respective command handler __wlan_hdd_cfg80211_set_wifi_test_config()
there is no maximum range check of INTVL_EXP and INTVL_MANTISSA attrs
which can lead to potential integer overflow.
Also there is no check whether mandatory attrs like DURATION,
INTVL_MANTISSA etc., are present. If these mandatory attrs are
not present then driver is initializing them to zeros
which can lead to divide by zero error when calculating wake interval.
To address this, return error when mandatory attributes are not
present and add maximum range check.
Change-Id: If3ac71e1263906fdd502c77103e1fff91f65e816
CRs-Fixed: 2435728
In hdd_deregister_cb, wlan_hdd_cfg80211_stats_ext_callback should
be deregistered instead of registered.
Change-Id: Ib7051aeb4579e2573b1b1845601aee07f596bcbc
CRs-Fixed: 2449023
Scenario of the issue is :-
1. Keep sta+sap_scc_dfs_ch as 0 to disable the dfs concurrency
2. Start a SAP on any 5ghz channel(NON-DFS).
3. Start a STA on a DFS channel.
Expectation: The SAP should not do MCC, SCC as the above
mentioned ini is 0, also MCC is not prefereed in a HW
solution where DFS is preferred, hence the SAP should go
to 2.4ghz and DBS should be the expectation.
Observation: The SAP does not do a DBS operation, and falls to
MCC here.
Reason: When the SAP gets a PCL in the path of SAP restart,
the PCL feels that a new SAP is going to come up, and hence
gives the best channel (first element of PCL ) as its own,
which leads to restart being rejected, as the SAP cannot start
on a channel which is the same as existing.
The final channel then selected is the STA channel, leading to
DFS SCC which is also not allowed. Hence the SAP is now stuck
in MCC(STA+SAP , one on DFS, and the other on NON-DFS channel).
Fix: The fix is to get an alternate channel for SAP restart, other
than the channel on which the SAP is already up, to lead to DBS,
if the STA channel is not suitable for SCC operaion.
Change-Id: Iab3ad22b2f970ca26ce3e6bc7a9b5ee34bc7e7ba
CRs-Fixed: 2443718
Currently the driver does not sends the assoc req and assoc
response frame exchanged with the AP if the connection attempt
fails with the peer.
The connection failure can be because of n number of reasons,
OCE assoc reject be one of them.
The supplicant requires these IEs to reject the connection
attempt with the AP with which the connect attempt failed
for t number of seconds, which is mentioned by the AP.
Fix is to send the assoc req, and assoc response IEs to
the driver.
Change-Id: I9c1f7063105912a8005f9e8399640d028b15eec7
CRs-Fixed: 2445709
Commit I0f79731a750c9d759bcd5593f11a740572e9d4ad added wow disable
check to disable wow(apps low power) mode features for all modes.
Move wow disable check after hdd validate context to make code more
readable. There is no issue with current code as well because DSC
vdev op protection already protects cfg80211 suspend/resume OPs
from SSR and driver unload.
Change-Id: I3a39a445e7431735e8ac64fc12b9e7ba71d8816c
CRs-Fixed: 2447777
When sending keepalive packets if there is failure in mapping
request id to pattern id in function -
hdd_map_req_id_to_pattern_id(), error code EINVAL is returned.
This error code is misleading and not sufficient to inform the
userspace that all available buffers are utilized and it should
stop sending keepalive packets.
Return proper error code if all available buffers are utilized
and no buffers are available to address any new request to send
keepalive packets.
Change-Id: Ie54299a0a7ff43a7044316d641d19ce12ac047c8
CRs-Fixed: 2445981
Currently Roam Scan time is misspelled as Raom in roam_stats debugfs,
fix with proper spell.
Change-Id: I7d5d889da1e168990f44ce609273812a7ba4ec3e
CRs-Fixed: 2445715
If gEnableSapSuspend is disabled then in both SAP and GO mode
cfg80211 suspend should be rejected. Fix a boolean logic typo
in GO mode such that GO mode behaves same as SAP mode.
Change-Id: I49ab2a378f32eb4dedaa57183ad78cc022419cfa
CRs-Fixed: 2446133
wlan_vdev_get_bsspeer() return bss peer without taking the ref count
of the peer and thus if peer is deleted after wlan_vdev_get_bsspeer()
returns a valid peer, the caller will have stale entry of the peer.
Stale entry of peer can lead to Assert.
Use wlan_objmgr_vdev_try_get_bsspeer API in hdd to get the BSS peer
which increment the refcount if peer is valid. With this the peer
won't be deleted till the caller release the ref count of the peer.
Change-Id: I9adf79810c7ec02af377f485eee596dd14289b50
CRs-Fixed: 2445716
Disable OCE in STA vdev if any sta gets associated to SAP/GO.
This will improve the scan results in STA interface.
Without this fix firmware will do probe request deferral for 15ms
out of 28 ms , so 15ms is gone and rest is not sufficient dwell
time to get all AP probe responses.
Change-Id: Ie6f79c86025c53360c792c740a963ed8a1d9b936
CRs-Fixed: 2443190
WoW feature may need to be disabled for certain targets
hence add an INI item gDisableWow to disable wow feature
for all modes.
Change-Id: I0f79731a750c9d759bcd5593f11a740572e9d4ad
CRs-Fixed: 2446226
Currently in connect_info debugfs file, only tx rate info is presented.
Add rx_bit_rate to present rx rate info.
Change-Id: I24ceb287880a60896b49b69d40646b549fd9a3d1
CRs-Fixed: 2440285
Before CFG/INI convergence to the new cfg module, hdd maintained
the infrastructure to parse ini items from WCNSS_qcom_cfg.ini and
push the value to hdd_config members. With all the cfg/ini moved
to the new converged CFG component, this infra is not required.
So cleanup the legacy ini infrastructure in HDD.
Change-Id: Ia028edd10682a0ac8ed6a663c20ba5f67b962f1d
CRs-Fixed: 2445314
Driver uses cipher stored in vdev to get the MIC length, which
may get updated if multiple peer(TDLS peer in STA case) get
connected to the vdev. Thus depending on latest peer cipher type
the MIC length will be calculated for all peers.
Add changes to store cipher info in peer and use it to calculate
MIC length for the frame if CRYPTO_SET_KEY_CONVERGED is defined.
Change-Id: I852e4b519f55d8020237989314f8506aa275f379
CRs-Fixed: 2444416
Currently SAR feature version is decided based on
feature flag WLAN_FEATURE_SARV1_TO_SARV2, if this
flag is enabled SAR version 2 is used.
Add an ini support to specify the SAR version.
Change-Id: Ib3ac8a3e7320d3e7f303ae14828d2b0428ca2993
CRs-fixed:
Use updated cp stats component to get peer rssi and tx rate,
rx rate for big data logging as legacy infrastructure is
deprecated.
Additionally add support for RX multicast broadcast packets from FW.
Change-Id: Idcab4a022a4e7e34bd15878f95ad8248ca3aa9dd
CRs-fixed: 2428582
There is chance that some active thread is running and
skip stop modules. In that case driver should not
deregister policy mgr callback.
Call hdd_deregister_policy_manager_callback after
active thread check when stop modules.
Change-Id: I5fe3e438e87da0b333ae9b20994e58228fa67918
CRs-Fixed: 2443271
When run cmd: wpa_cli driver SETROAMINTRABAND 1 to runtime
configure intro BSS roaming capability, PCL isn't updated to F/W
and intro BSS roaming doesn't work until next connection or
disconnection, it is not our expectation.
Change-Id: I9e8f7de4d87ca00e8ddcb63cc30d784e0c786a9e
CRs-Fixed: 2444463
