Use the correct configuration parameter to enable the
vendor VHT IE support in SAP mode.
Change-Id: I15330d372fe2b83bb229aa967bea5d43813ada95
CRs-Fixed: 2526798
To ensure the total weigtage of various factors doesn't exceed
100, there is a check in mlme_init_scoring_cfg(). If the total
weightage for roam score exceeds 100, the default values are
pushed for the weight configs.
In this computation, the enable/disable value is also added,
which results in configuration only upto 99%. Fix this weight
configuration and remove the enable flag value addition to the
total weight.
Change-Id: I15cf70428b2e8afa2203299dae98c287e5e2222d
CRs-Fixed: 2527361
Add Feature Flag HIF_RECORD_RX_PADDR for Helium only to record
paddr for IOVA and virtual address in CE descriptor history.
Change-Id: I926fbd0fa74cc7e1488a5c7cac007a6432d50d2e
CRs-Fixed: 2528295
gEnablePowerSaveOffload is curretly set to 0 but the default recommended
value is 2. Change default value of gEnablePowerSaveOffload to 2.
Change-Id: I456b0947715be39756e2971a2b2cdcd40e527e4c
CRs-Fixed: 2498218
Currently the driver flushes the scan entry in the scan
db for the BSSID which it was connected to in deauth, disassoc
and lostlink case.
In case of disassoc, and deauth, ap is still alive, hence
there is a chance for connection, but in lostlink case
there is no chance as the AP is switched off.
So if the supplicant finds the scan result in the scan
cache, it would try connect with this, but since the AP is not
present, and cannot service anymore, it would result to a
failed connect attempt.
After several failure attempts, supplicant would blacklist the
AP for some time.
If the AP is alive again, the DUT cannot connect to it since
it is blacklisted. Hence this situation leads to blacklisting
a AP which did not send any assoc reject, and can service the
DUT.
Fix is to clear the scan cache so that supplicant cannot try to
send connect request for this AP to the driver, hence there
would be no point to blacklist the AP.
This would ensure the wireless connection with this AP in
future.
Change-Id: I14fb36ef588856750917d83c32644b135186def9
CRs-Fixed: 2525539
Currently the driver does not verify the channel of the
AP and adds that to the connect list.
If a connect comes to the driver for this BSSID, then the
driver sends the same channel to the FW to start the vdev
which results in an assert due to channel not valid.
Fix is to check the validity of the channel and send a
vdev start only with a valid channel frequency.
Change-Id: Ic5c8c446f8731b32123051126503b071428f122c
CRs-Fixed: 2515158
CONFIG_LEGACY_CHAN_ENUM has been removed. That macro needs channel number
based enumeration. Use channel frequency going forward. So change to
frequency based channel enumeration.
Change-Id: I234eb070a6dcfaf3325bbd523c19188d5b2bbd24
CRs-Fixed: 2513098
6 GHZ has introduced new set of frequency based APIs. Also there is
conditional usage of 6 GHZ band. Add configuration items for these.
Change-Id: I22703989ec7e6711af640f1f9d0afded46026b8a
CRs-Fixed: 2513098
Modify roaming enhancements specific ini default value to work
adaptive 11r and roaming enhancements feature.
Change-Id: I58efd5d8cc50ca1a2b9252c9aad8484cda58ae25
CRs-Fixed: 2521810
In __iw_set_pno if memory allocation for data fails the vdev ref is
not released. Also the osif code uses WLAN_LEGACY_MAC_ID instead of
WLAN_OSIF_ID to take the vdev ref.
Fix the vdev ref leak and use WLAN_OSIF_ID to take vdev ref in
__iw_set_pno.
Change-Id: Ibb7e10ad51e36bbbcf4238aa099e2a05818ea1c1
CRs-Fixed: 2525960
When WMI_IFACE_LINK_STATS_EVENTID is received, WMA layer should
check FW service bit to confirm if HW db2dbm conversion is
enabled or not, or the final results indicated to HDD layer
will be inaccurate.
Add FW service bit checking to make sure db2dbm conversion is
done by driver when HW doesn't support it.
Change-Id: Id369999e4d5a6805200de82d1e8caf3121582c40
CRs-Fixed: 2506620
The pktlog will fail with ROME module due to the change IDs:
I24776caa3b78ec38d94421f243ec72d81ee3102d
Ifb70ac0993f2402201f88758845f730cf677b1a0
Define new macro PKTLOG_LEGACY for HELIUM/ROME to avoid the ROME PKTLOG
failure.
Change-Id: Ibaa20b7af208a261e0fd8682de45ad8eb4a69212
CRs-Fixed: 2520696
It need rx chainmask to select noise floor when start spectral gen3
scan and rx data by DMA. So set rx chainmask before start spectral
scan.
Change-Id: I63efd8f5384537b5697ba809bb05fdd17e243210
CRs-Fixed: 2519366
Spectral tool is required to compatible with different version of
spectral, so add version information in SPECTRAL_SCAN_REGISTER_RSP.
Change-Id: Id766d95463e511209c752a428761fe7f1380c53e
CRs-Fixed: 2495259
In the host driver, after receiving NDP END INDICATIONs for all NDP
connections then policy manager deletes NDI mode from
pm_conc_connection_list.
From user-space application, if NDP END REQUEST and NDI DELETE request
are issued back to back without waiting for NDP END indication, then
firmware could process NDI DELETE command firstly and avoid NDP END
indication due to peer delete as a part of NDI delete.
If vendor command NDI delete request is issued without receiving
NDP_END_INDICATIONs for all active NDP peers then pm_conc_connection_list
contains stale entry of PM_NDI_MODE associated with deleted NDI.
Stale NDI entry in pm_conc_connection_list is the cause for failure of
get_second_connection_pcl_table_index() for PM_NAN_DISC_MODE, therefore
further NAN enable requests are rejected.
To address this issue, cleanup PM_NDI_MODE from pm_conc_connection_list
as a part of NDI delete.
Change-Id: Ic1535420b60224cc426b24e22fe7486781fd2fa6
CRs-Fixed: 2519625
Populate vdev mlme obj and dest chain with vdev start req for
vdev_mgr_start_send.
Remove vdev_start_params from wma_vdev_start.
Remove vdev_mgr_start_param_populate.
Change-Id: I8606441341344fbcd181facf4000942ff94ac00d
CRs-Fixed: 2516590
Do not enable AMSDU Rx by advertising advertises AMSDUSUPPPORTED=0
in ADD_BA response if the connection is on 2.4Ghz.
Change-Id: I1c61ce9f3824a600fbd5123680b7d00ae7659438
CRs-Fixed: 2519746
Currently the driver is not included the VHT capability
on 2.4ghz band if gEnableVhtFor24GHzBand ini is enabled.
As a result the driver is not advertising the VHT support
on 2.4ghz band in wiphy per band info even gEnableVhtFor24GHzBand
ini is enabled.
To resolve this, add VHT capability in the wiphy for 2.4ghz
Change-Id: If36b0ad9bf546e54542485637a99c1ee82b1850e
CRs-Fixed: 2495337
Add Feature Flag HIF_RECORD_RX_PADDR for Helium to record
paddr in CE descriptor history.
Change-Id: I5a6af11fecc00a26d1a334a983290a00be34895c
CRs-Fixed: 2525667
Currently, in function tdls_process_reset_all_peers before checking
the tdls peer state connected peer count is checked and if is zero
then returned without checking the peer id. If peer is created
but the peer count is not increased then TDLS component will not
notify to delete the peer and this can lead to subsequent add peer
denials.
Change-Id: I2fd1d6945eb9dca478f11cd05ba0ee4a9ed007ea
CRs-Fixed: 2524442
Vdev start failure handling in SAP and STA and not handled
properly and thus VDEV SM doesn't move to INIT state and
lead to asserts.
Change-Id: I5ea09f9c6e84a2e1c7f9254319aaa1a11e2f97e8
CRs-Fixed: 2526179
On HST, service bit wmi_service_hw_db2dbm_support is set, need
send target hirssi_upper_bound as RSSI format instead of SNR.
Change-Id: Ie9029e9c26f84456722ca2864a28c7ba3a2be52d
CRs-Fixed: 2485833
For DBS HW, reject STA or SAP connection if
result to SAP+SAP and STA active on same mac.
SAP+SAP+SAP SCC is still allowed.
Change-Id: If30cf58d2b16fc3ff4dfff4f75d7eeaa51786cad
CRs-Fixed: 2498837
