Commit Graph

200 Commits

Author SHA1 Message Date
Ingo Molnar
6cb54819d7 [PATCH] remove sys_set_zone_reclaim()
This removes sys_set_zone_reclaim() for now.  While i'm sure Martin is
trying to solve a real problem, we must not hard-code an incomplete and
insufficient approach into a syscall, because syscalls are pretty much
for eternity.  I am quite strongly convinced that this syscall must not
hit v2.6.13 in its current form.

Firstly, the syscall lacks basic syscall design: e.g. it allows the
global setting of VM policy for unprivileged users. (!) [ Imagine an
Oracle installation and a SAP installation on the same NUMA box fighting
over the 'optimal' setting for this flag. What will they do? Will they
try to set the flag to their own preferred value every second or so? ]

Secondly, it was added based on a single datapoint from Martin:

 http://marc.theaimsgroup.com/?l=linux-mm&m=111763597218177&w=2

where Martin characterizes the numbers the following way:

 ' Run-to-run variability for "make -j" is huge, so these numbers aren't
   terribly useful except to see that with reclaim the benchmark still
   finishes in a reasonable amount of time. '

in other words: the fundamental problem has likely not been solved, only
a tendential move into the right direction has been observed, and a
handful of numbers were picked out of a set of hugely variable results,
without showing the variability data. How much variance is there
run-to-run?

I'd really suggest to first walk the walk and see what's needed to get
stable & predictable kernel compilation numbers on that NUMA box, before
adding random syscalls to tune a particular aspect of the VM ... which
approach might not even matter once the whole picture has been analyzed
and understood!

The third, most important point is that the syscall exposes VM tuning
internals in a completely unstructured way. What sense does it make to
have a _GLOBAL_ per-node setting for 'should we go to another node for
reclaim'? If then it might make sense to do this per-app, via numalib or
so.

The change is minimalistic in that it doesnt remove the syscall and the
underlying infrastructure changes, only the user-visible changes.  We
could perhaps add a CAP_SYS_ADMIN-only sysctl for this hack, a'ka
/proc/sys/vm/swappiness, but even that looks quite counterproductive
when the generic approach is that we are trying to reduce the number of
external factors in the VM balance picture.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-08-01 10:03:56 -07:00
Keith Owens
b833961bd3 [IA64] unwind.c uses wrong unat from switch_stack
unwind.c can read the wrong unat bits from switch_stack.
sw->caller_unat is the value of ar.unat when the task was blocked.
sw->ar_unat is the value of ar.unat after doing st8.spill for r4-7.
IOW, ar_unat is caller_unat with 4 bits changed.

unw_access_gr() uses sw->ar_unat for r4-7 (correct), but it also uses
sw->ar_unat for other scratch registers (incorrect).  sw->ar_unat
should only be used for r4-7, everything else should use
sw->caller_unat, unless modified by unwind info.  Using sw->ar_unat
risks picking up the 4 bits that were overwritten when r4-7 were saved.

Also this line is wrong
	unw.sw_off[unw.preg_index[UNW_REG_PFS]] = SW(AR_UNAT);
and should be
	unw.sw_off[unw.preg_index[UNW_REG_PFS]] = SW(AR_PFS);

Signed-off-by: Keith Owens <kaos@sgi.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-07-27 14:18:08 -07:00
Robert Love
d108919b2b [IA64] inotify: ia64 syscalls.
Attached patch adds the inotify syscalls to ia64.

Signed-off-by: Robert Love <rml@novell.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-07-27 10:46:12 -07:00
Steven Rostedt
d46523ea32 [PATCH] fix MAX_USER_RT_PRIO and MAX_RT_PRIO
Here's the patch again to fix the code to handle if the values between
MAX_USER_RT_PRIO and MAX_RT_PRIO are different.

Without this patch, an SMP system will crash if the values are
different.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Dean Nelson <dcn@sgi.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-07-26 15:40:00 -07:00
Eric W. Biederman
59586e5a26 [PATCH] Don't export machine_restart, machine_halt, or machine_power_off.
machine_restart, machine_halt and machine_power_off are machine
specific hooks deep into the reboot logic, that modules
have no business messing with.  Usually code should be calling
kernel_restart, kernel_halt, kernel_power_off, or
emergency_restart. So don't export machine_restart,
machine_halt, and machine_power_off so we can catch buggy users.

Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-07-26 14:35:42 -07:00
Ian Wienand
46906c4415 [IA64] Fix undefined reference to can_cpei_retarget for simulator
The simulator build doesn't turn on ACPI, so doesn't have a definition
of can_cpei_retarget.

Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-07-14 09:21:47 -07:00
Tony Luck
99ad25a313 Auto merge with /home/aegl/GIT/linus 2005-07-13 12:15:43 -07:00
Dean Nelson
59a0a8aa6a [IA64] fix call of smp_processor_id() by XPC while
XPC calls smp_processor_id() twice from xpc_setup_infrastructure() with
preemption enabled, which gets flagged if 'DEBUG_PREEMPT=y'. This patch
replaces the two calls to smp_processor_id() by a single call to
raw_smp_processor_id() since any CPU within the partition will do.

Signed-off-by: Dean Nelson <dcn@sgi.com>
Acked-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-07-13 11:52:45 -07:00
Christoph Lameter
7c2a6c62c0 [IA64] Altix pcibus_to_node implementation
The Altix subarch does not provide node information via ACPI. Instead hooks
are used to fixup pci structures. This patch determines the nodes for Altix
PCI busses.

Remote Bridges:
---------------
Altix supports remote I/O nodes without memory or processors but with bridges.
The TIOCA type of bridge is an AGP bridge and the PROM provides information
about the closest node. That information will be returned by pcibus_to_node.

The TIOCP remote bridge type is a PCI bridge but the PROM does not provide a
closest node id. pcibus_to_node will return -1 for devices on those bridges
meaning that device control structures may be allocated on any node.

Safeguard:
----------
Should the fixups result in invalid node information for a pci controller then
a warning will be printed and pcibus_to_node will return -1.


This patch also fixes the "FIXME" in sn_dma_alloc_coherent. This means that
dma_alloc_coherent will now use alloc_pages_node to allocate memory local to
the node that the PCI device is connected to.

Signed-off-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-07-12 16:12:55 -07:00
Zoltan Menyhart
08357f82d4 [IA64] improve flush_icache_range()
Check with PAL to see what the i-cache line size is for
each level of the cache, and so use the correct stride
when flushing the cache.

Acked-by: David Mosberger
Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-07-12 15:33:18 -07:00
Len Brown
5028770a42 [ACPI] merge acpi-2.6.12 branch into latest Linux 2.6.13-rc...
Signed-off-by: Len Brown <len.brown@intel.com>
2005-07-12 17:21:56 -04:00
Greg Edwards
60a762b6a6 [IA64] remove CONFIG_IA64_SGI_SN_SIM
This patch removes the CONFIG_IA64_SGI_SN_SIM option entirely, allowing
any kernel bootable on sn2 to also be booted in the simulator.

Boot tested on Altix and HP rx2600.

Signed-off-by: Greg Edwards <edwardsg@sgi.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-07-12 14:13:08 -07:00
Linus Torvalds
9ffc7a0ebf Merge master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 2005-07-12 13:16:40 -07:00
Christoph Lameter
514604c6d1 [IA64] pcibus_to_node implementation for IA64
pcibus_to_node provides a way for the Linux kernel to identify to which
node a certain pcibus connects to. Allocations of control structures
for devices can then be made on the node where the pci bus is located
to allow local access during interrupt and other device manipulation.

This patch provides a new "node" field in the the pci_controller
structure. The node field will be set based on ACPI information (thanks
to Alex Williamson  <alex.williamson@hp.com for that piece).

Signed-off-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-07-12 11:04:22 -07:00
Venkatesh Pallipadi
6c4fa56033 [ACPI] fix C1 patch for IA64
http://bugzilla.kernel.org/show_bug.cgi?id=4233

Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2005-07-12 00:10:20 -04:00
Sam Ravnborg
d5950b4355 [NET]: add a top-level Networking menu to *config
Create a new top-level menu named "Networking" thus moving
net related options and protocol selection way from the drivers
menu and up on the top-level where they belong.

To implement this all architectures has to source "net/Kconfig" before
drivers/*/Kconfig in their Kconfig file. This change has been
implemented for all architectures.

Device drivers for ordinary NIC's are still to be found
in the Device Drivers section, but Bluetooth, IrDA and ax25
are located with their corresponding menu entries under the new
networking menu item.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2005-07-11 21:03:49 -07:00
Ashok Raj
55e59c511c [ACPI] Evaluate CPEI Processor Override flag
ACPI 3.0 added a Correctable Platform Error Interrupt (CPEI)
Processor Overide flag to MADT.Platform_Interrupt_Source.
Record the processor that was provided as hint from ACPI.

Signed-off-by: Ashok Raj <ashok.raj@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2005-07-12 00:01:41 -04:00
Kenji Kaneshige
3b5cc09033 [IA64] assign_irq_vector() should not panic
Current assign_irq_vector() will panic if interrupt vectors is running
out. But I think how to handle the case of lack of interrupt vectors
should be handled by the caller of this function. For example, some
PCI devices can raise the interrupt signal via both MSI and I/O
APIC. So even if the driver for these device fails to allocate a
vector for MSI, the driver still has a chance to use I/O APIC based
interrupt. But currently there is no chance for these driver to use
I/O APIC based interrupt because kernel will panic when
assign_irq_vector() fails to allocate interrupt vector.

The following patch changes assign_irq_vector() for ia64 to return
-ENOSPC on error instead of panic (as i386 and x86_64 versions do).

Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-07-11 10:30:07 -07:00
Nishanth Aravamudan
699139279d [IA64] use msleep_interruptible() instead of schedule_timeout
Description: Replace schedule_timeout() with msleep_interruptible() to
guarantee the task delays as expected.

Signed-off-by: Nishanth Aravamudan <nacc@us.ibm.com>
Acked-by: Dean Nelson <dcn@sgi.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-07-11 10:26:40 -07:00
Olaf Hering
d0feafbf14 [IA64] remove linux/version.h include from arch/ia64
changing CONFIG_LOCALVERSION rebuilds too much, for no appearent reason.

Signed-off-by: Olaf Hering <olh@suse.de>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-07-11 09:58:52 -07:00
H. J. Lu
763b3917e7 [IA64] Fix a typo in arch/ia64/kernel/entry.S
Both 2.4 and 2.6 kernels need this patch for the next binutils.

Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-07-08 13:23:49 -07:00
Jack Steiner
21517a57e8 [IA64] - Disable tiocx driver on non-SN systems
Disable the tiocx driver on non-SN systems.

Signed-off-by: Jack Steiner <steiner@sgi.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-07-07 09:52:59 -07:00
Tony Luck
8d7e35174d [IA64] fix generic/up builds
Jesse Barnes provided the original version of this patch months ago, but
other changes kept conflicting with it, so it got deferred.  Greg Edwards
dug it out of obscurity just over a week ago, and almost immediately
another conflicting patch appeared (Bob Picco's memory-less nodes).

I've resolved the conflicts and got it running again.  CONFIG_SGI_TIOCX
is set to "y" in defconfig, which causes a Tiger to not boot (oops in
tiocx_init).  But that can be resolved later ... get this in now before it
gets stale again.

Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-07-06 18:18:10 -07:00
bob.picco
564601a5d1 [IA64] memory-less-nodes repost
I reworked how nodes with only CPUs are treated.  The patch below seems
simpler to me and has eliminated the complicated routine
reassign_cpu_only_nodes.  There isn't any longer the requirement
to modify ACPI NUMA information which was in large part the
complexity introduced in reassign_cpu_only_nodes. 

This patch will produce a different number of nodes. For example,
reassign_cpu_only_nodes would reduce two CPUonly nodes and one memory node
configuration to one memory+CPUs node configuration.  This patch
doesn't change the number of nodes which means the user will see three.  Two
nodes without memory and one node with all the memory.

While doing this patch, I noticed that early_nr_phys_cpus_node isn't serving
any useful purpose.  It is called once in find_pernode_space but the value
isn't used to computer pernode space.  

Signed-off-by: bob.picco <bob.picco@hp.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-07-06 15:45:30 -07:00
af25e94d4d [IA64] Make ia64 die() preempt safe
Signed-off-by: Keith Owens <kaos@sgi.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-07-06 15:44:55 -07:00
Tony Luck
67d340f440 Auto merge with /home/aegl/GIT/linus 2005-07-06 15:35:18 -07:00
Keith Owens
2ba3e3e65c [IA64] restore_sigcontext is not preempt safe
restore_sigcontext calls ia64_set_local_fpu_owner() which requires that
preempt be disabled.

Signed-off-by: Keith Owens <kaos@sgi.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-07-06 15:31:15 -07:00
Prarit Bhargava
6f354b014b [IA64] hotplug/ia64: SN Hotplug Driver - SN Hotplug Driver code
This patch is the SGI hotplug driver and additional changes required for
the driver.  These modifications include changes to the SN io_init.c code
for memory management, the inclusion of new SAL calls to enable and disable
PCI slots, and a hotplug-style driver.

Signed-off-by: Prarit Bhargava <prarit@sgi.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-07-06 15:29:53 -07:00
Prarit Bhargava
283c7f6ac6 [IA64] hotplug/ia64: SN Hotplug Driver - new SN PROM version code
This patch is a rewrite of the code to check the PROM version.  The current
code has some deficiences in the way PROM comparisons were made.  The minimum
value of PROM that will boot has also been changed to 4.04.

Signed-off-by: Prarit Bhargava <prarit@sgi.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-07-06 15:29:13 -07:00
Prarit Bhargava
c13cf3714f [IA64] hotplug/ia64: SN Hotplug Driver: moving of header files
This patch moves header files out of the arch/ia64/sn directories and into
include/asm-ia64/sn.  These files were being included by other subsystems
and should be under include/asm-ia64/sn.

Signed-off-by: Prarit Bhargava <prarit@sgi.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-07-06 15:26:51 -07:00
Prarit Bhargava
cb4cb2cb9b [IA64] hotplug/ia64: SN Hotplug Driver: SN IRQ Fixes
This patch  fixes the SN IRQ code such that cpu affinity and
Hotplug can modify IRQ values.  The sn_irq_info structures are now locked
using a RCU lock mechanism to avoid lock contention in the lost interrupt
WAR code.

Signed-off-by: Prarit Bhargava <prarit@sgi.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-07-06 14:59:44 -07:00
Rusty Lynch
6772926bef [PATCH] kprobes: fix namespace problem and sparc64 build
The following renames arch_init, a kprobes function for performing any
architecture specific initialization, to arch_init_kprobes in order to
cleanup the namespace.

Also, this patch adds arch_init_kprobes to sparc64 to fix the sparc64 kprobes
build from the last return probe patch.

Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-07-05 19:19:00 -07:00
Tony Luck
0647d8cfd4 [IA64] Update zx1_defconfig
Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-06-29 16:01:40 -07:00
Tony Luck
06697eea4c [IA64] Update tiger_defconfig
Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-06-29 15:45:41 -07:00
Tony Luck
d18bfacff2 Auto merge with /home/aegl/GIT/linus 2005-06-29 15:21:41 -07:00
Peter Chubb
a68db763af [IA64] Fix another IA64 preemption problem
There's another problem shown up by Ingo's recent patch to make
smp_processor_id() complain if it's called with preemption enabled.
local_finish_flush_tlb_mm() calls activate_context() in a situation
where it could be rescheduled to another processor.  This patch
disables preemption around the call.

Signed-off-by: Peter Chubb <peterc@gelato.unsw.edu.au>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-06-28 10:01:19 -07:00
David Mosberger-Tang
819c67e69c [IA64] Replace stale KDB-code with useful MAGIC_SYSRQ code in simserial.c
Patch makes it possible to use the "F4" function key to do
magic sysrq in the HP Ski simulator.

Signed-off-by: David Mosberger-Tang <davidm@hpl.hp.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-06-28 09:58:29 -07:00
Bruce Losure
c1ffb6a8aa [IA64-SGI] Altix patch to tiocx, add subsys_initcall
This patch fixes an ordering issue between the init code for the
tiocx bus driver and tiocx-related device drivers.   Also adds
a new brick to the list of known FPGA bricks.

Signed-off-by: Bruce Losure <blosure@sgi.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-06-28 09:53:42 -07:00
Prarit Bhargava
92a582ed27 [IA64] sparse cleanup of TIOCA files
This patch is a sparse compile cleanup of tioca_provider.c, sn_hwperf.h, and
tioca_provider.h.  Each of these files had sparse warnings when
compiled.

Signed-off-by: Prarit Bhargava <prarit@sgi.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-06-28 09:50:48 -07:00
Jack Steiner
71a5d027c9 [IA64-SGI] - new macros for SGI SN simulator
This patch changes some macros that are used when running kernel on the
SGI simulator.

Signed-off-by: Jack Steiner <steiner@sgi.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-06-28 09:45:45 -07:00
Prarit Bhargava
8e4641b3ee [IA64] sparse cleanup of shub_mmr.h
This patch is a sparse compile cleanup of shub_mmr.h using both the defconfig
and the sn2_defconfig config files.

The issue with this file was the missing usage of __IA64_UL_CONST wrapper.
This wrapper is defined in include/asm-ia64/types.h and wraps a long
constant definition with UL or with nothing depending on its usage in the
kernel.  The missing wrapper caused many sparse compile errors like

        warning: constant 0x0x0000000010000380 so big it is long

Signed-off-by: Prarit Bhargava <prarit@sgi.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-06-28 09:37:16 -07:00
David Mosberger-Tang
458f935527 [IA64] Speed up lfetch.fault [NULL]
This patch greatly speeds up the handling of lfetch.fault instructions
which result in NaT consumption. Due to the NaT-page mapped at address
0, this is guaranteed to happen when lfetch.fault'ing a NULL pointer.
With this patch in place, we can even define prefetch()/prefetchw() as
lfetch.fault without significant performance degradation.  More
importantly, it allows compilers to be more aggressive with using
lfetch.fault on pointers that might be NULL.

Signed-off-by: David Mosberger-Tang <davidm@hpl.hp.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-06-28 09:28:16 -07:00
Bjorn Helgaas
e15da40176 [IA64] Recognize HP sx2000 chipset
No functional change, just identify the device nicely:

  -IOC: Unknown (103c:12ec) 0.1 HPA 0xf8020002000 IOVA space 1024Mb at 0x40000000
  +IOC: sx2000 0.1 HPA 0xf8020002000 IOVA space 1024Mb at 0x40000000

We used to create fake PCI devices for these chips, but we no longer do that.
So I don't think there's any reason to touch pci_ids.h now.

Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-06-28 09:25:56 -07:00
Mark Maule
a9f9de7378 [IA64-SGI] altix: enable vgacon support
Altix patch to enable use of vgacon driver on that platform.  Depends on the
PCDP generalization patch discussed at:

	http://marc.theaimsgroup.com/?l=linux-ia64&m=111446235101939&w=2

Signed-off-by: Mark Maule <maule@sgi.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-06-28 09:23:04 -07:00
Mark Maule
66b7f8a304 [IA64-SGI] pcdp: add PCDP pci interface support
Resend 2 with changes per Bjorn Helgaas comments.  Changes from original:

+ Change globals to vga_console_iobase/vga_console_membase and make them
  unconditional.
+ Address style-related comments.

Patch to extend the PCDP vga setup code to support PCI io/mem translations
for the legacy vga ioport and ram spaces on architectures (e.g. altix) which
need them.

Summary of the changes:

drivers/firmware/pcdp.c
drivers/firmware/pcdp.h
-----------------------
+ add declaration for the spec-defined PCI interface struct (pcdp_if_pci)
  as well as support macros.

+ extend setup_vga_console() to know about pcdp_if_pci and add a couple of
  globals to hold the io and mem translation offsets if present.

arch/ia64/kernel/setup.c
------------------------
+ tweek early_console_setup() to allow multiple early console setup routines
  to be called.

include/asm-ia64/vga.h
----------------------
+ make VGA_MAP_MEM vga_console_membase aware

Signed-off-by: Mark Maule <maule@sgi.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-06-28 09:09:06 -07:00
Tony Luck
54522b6613 Auto merge with /home/aegl/GIT/ia64-test 2005-06-28 08:24:49 -07:00
Greg KH
8644d2a42b Merge rsync://rsync.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6 2005-06-27 22:07:56 -07:00
Kenji Kaneshige
0e888adc41 [PATCH] ACPI based I/O APIC hot-plug: ia64 support
This is an ia64 implementation of acpi_register_ioapic() and
acpi_unregister_ioapic() interfaces.

Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-06-27 21:52:44 -07:00
Kenji Kaneshige
b1bb248a5d [PATCH] ACPI based I/O APIC hot-plug: add interfaces
This patch adds the following new interfaces for I/O xAPIC
hotplug. The implementation of these interfaces depends on each
architecture.

    o int acpi_register_ioapic(acpi_handle handle, u64 phys_addr,
			       u32 gsi_base);

        This new interface is to add a new I/O xAPIC specified by
        phys_addr and gsi_base pair. phys_addr is the physical address
        to which the I/O xAPIC is mapped and gsi_base is global system
        interrupt base of the I/O xAPIC. acpi_register_ioapic returns
        0 on success, or negative value on error.

    o int acpi_unregister_ioapic(acpi_handle handle, u32 gsi_base);

        This new interface is to remove a I/O xAPIC specified by
        gsi_base. acpi_unregister_ioapic returns 0 on success, or
        negative value on error.

Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-06-27 21:52:44 -07:00
Rajesh Shah
f7d473d919 [PATCH] acpi bridge hotadd: Read bridge resources when fixing up the bus
Read bridge io/mem/pfmem ranges when fixing up the bus so that bus resources
are tracked.  This is required to properly support pci end device and bridge
hotplug.

Signed-off-by: Rajesh Shah <rajesh.shah@intel.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-06-27 21:52:41 -07:00