Commit Graph

200 Commits

Author SHA1 Message Date
Rajesh Shah
71c3511c22 [PATCH] acpi bridge hotadd: Make pcibios_fixup_bus() hot-plug safe
PCI scan code calls the arch specific pcibios_fixup_bus() each time it scans a
new bridge.  For root bridge hot-plug, the bridge and it's attached devices
may not have been configured properly yet, so it's not safe to claim those
resources at this time.

This code goes away when we clean up the way pci resources are claimed (in
pci_enable_device()), so this is only a stopgap fix.

Signed-off-by: Rajesh Shah <rajesh.shah@intel.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-06-27 21:52:39 -07:00
Rajesh Shah
fab3fb0ac8 [PATCH] acpi bridge hotadd: Fix pci_enable_device() for p2p bridges
When checking if a PCI to PCI bridge should be enabled to decode memory and/or
IO resources, we need to look at all device resources not just the first 6.
This is needed to allow PCI bridges to pass down memory and IO accesses to
child devices even when the bridge itself does not consume resources in its
PCI BARs.

Signed-off-by: Rajesh Shah <rajesh.shah@intel.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-06-27 21:52:39 -07:00
Rajesh Shah
c431ada45d [PATCH] acpi bridge hotadd: ACPI based root bridge hot-add
When you hot-plug a (root) bridge hierarchy, it may have p2p bridges and
devices attached to it that have not been configured by firmware.  In this
case, we need to configure the devices before starting them.  This patch
separates device start from device scan so that we can introduce the
configuration step in the middle.

I kept the existing semantics for pci_scan_bus() since there are a huge number
of callers to that function.

Also, I have no way of testing the changes I made to the parisc files, so this
needs review by those folks.  Sorry for the massive cross-post, this touches
files in many different places.

Signed-off-by: Rajesh Shah <rajesh.shah@intel.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-06-27 21:52:39 -07:00
Keshavamurthy Anil S
c7b645f934 [PATCH] kprobes/ia64: refuse kprobe on ivt code
Not safe to insert kprobes on IVT code.

This patch checks to see if the address on which Kprobes is being inserted is
in ivt code and if it is in ivt code then refuse to register kprobe.

Signed-off-by: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com>
Acked-by: David Mosberger <davidm@napali.hpl.hp.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-27 15:23:54 -07:00
Rusty Lynch
a528e21c23 [PATCH] kprobes/ia64: refuse inserting kprobe on slot 1
Without the ability to atomically write 16 bytes, we can not update the
middle slot of a bundle, slot 1, unless we stop the machine first.  This
patch will ensure the ability to robustly insert and remove a kprobe by
refusing to insert a kprobe on slot 1 until a mechanism is in place to
safely handle this case.

Signed-off-by: Rusty Lynch <rusty.lynch@intel.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-27 15:23:53 -07:00
Rusty Lynch
9508dbfe39 [PATCH] Return probe redesign: ia64 specific implementation
The following patch implements function return probes for ia64 using
the revised design.  With this new design we no longer need to do some
of the odd hacks previous required on the last ia64 return probe port
that I sent out for comments.

Note that this new implementation still does not resolve the problem noted
by Keith Owens where backtrace data is lost after a return probe is hit.

Changes include:
 * Addition of kretprobe_trampoline to act as a dummy function for instrumented
   functions to return to, and for the return probe infrastructure to place
   a kprobe on on, gaining control so that the return probe handler
   can be called, and so that the instruction pointer can be moved back
   to the original return address.
 * Addition of arch_init(), allowing a kprobe to be registered on
   kretprobe_trampoline
 * Addition of trampoline_probe_handler() which is used as the pre_handler
   for the kprobe inserted on kretprobe_implementation.  This is the function
   that handles the details for calling the return probe handler function
   and returning control back at the original return address
 * Addition of arch_prepare_kretprobe() which is setup as the pre_handler
   for a kprobe registered at the beginning of the target function by
   kernel/kprobes.c so that a return probe instance can be setup when
   a caller enters the target function.  (A return probe instance contains
   all the needed information for trampoline_probe_handler to do it's job.)
 * Hooks added to the exit path of a task so that we can cleanup any left-over
   return probe instances (i.e. if a task dies while inside a targeted function
   then the return probe instance was reserved at the beginning of the function
   but the function never returns so we need to mark the instance as unused.)

Signed-off-by: Rusty Lynch <rusty.lynch@intel.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-27 15:23:53 -07:00
Jens Axboe
22e2c507c3 [PATCH] Update cfq io scheduler to time sliced design
This updates the CFQ io scheduler to the new time sliced design (cfq
v3).  It provides full process fairness, while giving excellent
aggregate system throughput even for many competing processes.  It
supports io priorities, either inherited from the cpu nice value or set
directly with the ioprio_get/set syscalls.  The latter closely mimic
set/getpriority.

This import is based on my latest from -mm.

Signed-off-by: Jens Axboe <axboe@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-27 14:33:29 -07:00
Dinakar Guniguntala
7f1867a5b3 [PATCH] Dynamic sched domains: ia64 changes
ia64 changes similar to kernel/sched.c.

Signed-off-by: Dinakar Guniguntala <dino@in.ibm.com>
Acked-by: Paul Jackson <pj@sgi.com>
Acked-by: Nick Piggin <nickpiggin@yahoo.com.au>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-25 16:24:45 -07:00
Nick Piggin
687f1661d3 [PATCH] sched: sched tuning
Do some basic initial tuning.

Signed-off-by: Nick Piggin <nickpiggin@yahoo.com.au>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-25 16:24:42 -07:00
Shaohua Li
a9fa06c26f [PATCH] set cpu_state for CPU hotplug (ia64)
Dead CPU notifies online CPU that it's dead using cpu_state variable.
After switching to physical cpu hotplug, we forgot setting the variable.
This patch fixes it.  Currently only __cpu_die uses it.  We changed other
locations for consistency in case others use it.

Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Acked-by: Ashok Raj <ashok.raj@intel.com>
Cc: "Luck, Tony" <tony.luck@intel.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-25 16:24:31 -07:00
Zwane Mwaikambo
f370513640 [PATCH] i386 CPU hotplug
(The i386 CPU hotplug patch provides infrastructure for some work which Pavel
is doing as well as for ACPI S3 (suspend-to-RAM) work which Li Shaohua
<shaohua.li@intel.com> is doing)

The following provides i386 architecture support for safely unregistering and
registering processors during runtime, updated for the current -mm tree.  In
order to avoid dumping cpu hotplug code into kernel/irq/* i dropped the
cpu_online check in do_IRQ() by modifying fixup_irqs().  The difference being
that on cpu offline, fixup_irqs() is called before we clear the cpu from
cpu_online_map and a long delay in order to ensure that we never have any
queued external interrupts on the APICs.  There are additional changes to s390
and ppc64 to account for this change.

1) Add CONFIG_HOTPLUG_CPU
2) disable local APIC timer on dead cpus.
3) Disable preempt around irq balancing to prevent CPUs going down.
4) Print irq stats for all possible cpus.
5) Debugging check for interrupts on offline cpus.
6) Hacky fixup_irqs() to redirect irqs when cpus go off/online.
7) play_dead() for offline cpus to spin inside.
8) Handle offline cpus set in flush_tlb_others().
9) Grab lock earlier in smp_call_function() to prevent CPUs going down.
10) Implement __cpu_disable() and __cpu_die().
11) Enable local interrupts in cpu_enable() after fixup_irqs()
12) Don't fiddle with NMI on dead cpu, but leave intact on other cpus.
13) Program IRQ affinity whilst cpu is still in cpu_online_map on offline.

Signed-off-by: Zwane Mwaikambo <zwane@linuxpower.ca>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-25 16:24:29 -07:00
Dave Jones
821fe94727 [PATCH] gcc4 compile fix for recent ia64 xpc changes
Gcc4 doesn't like volatile casts as lvalues.  Make the structure members
volatile instead.

Signed-off-by: Dave Jones <davej@redhat.com>
Cc: "Luck, Tony" <tony.luck@intel.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-25 16:24:25 -07:00
Stephen Rothwell
0d77e5a2c2 [PATCH] compat: introduce compat_time_t
This patch is based on work by Carlos O'Donell and Matthew Wilcox.  It
introduces/updates the compat_time_t type and uses it for compat siginfo
structures.  I have built this on ppc64 and x86_64.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-23 09:45:32 -07:00
Anil S Keshavamurthy
852caccc89 [PATCH] Kprobes/ia64: temporary disarming of reentrant probe
This patch includes IA64 architecture specific changes(ported form i386) to
support temporary disarming on reentrancy of probes.

In case of reentrancy we single step without calling user handler.

Signed-of-by: Anil S Keshavamurth <anil.s.keshavamurthy@intel.com>

Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-23 09:45:25 -07:00
Keshavamurthy Anil S
89cb14c0dd [PATCH] Kprobes/IA64: check jprobe break before handling
Once the jprobe instrumented function returns, it executes a jprobe_break
which is a break instruction with __IA64_JPROBE_BREAK value.  The current
patch checks for this break value, before assuming that jprobe instrumented
function just completed.

The previous code was not checking for this value and that was a bug.

Signed-off-by: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-23 09:45:24 -07:00
Anil S Keshavamurthy
708de8f11c [PATCH] Kprobes IA64: safe register kprobe
The current kprobes does not yet handle register kprobes on some of the
following kind of instruction which needs to be emulated in a special way.

1) mov r1=ip
2) chk -- Speculation check instruction

This patch attempts to fail register_kprobes() when user tries to insert
kprobes on the above kind of instruction.

Signed-off-by: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-23 09:45:24 -07:00
Anil S Keshavamurthy
1674eafcbd [PATCH] Kprobes IA64: cmp ctype unc support
The current Kprobes when patching the original instruction with the break
instruction tries to retain the original qualifying predicate(qp), however
for cmp.crel.ctype where ctype == unc, which is a special instruction
always needs to be executed irrespective of qp.  Hence, if the instruction
we are patching is of this type, then we should not copy the original qp to
the break instruction, this is because we always want the break fault to
happen so that we can emulate the instruction.

This patch is based on the feedback given by David Mosberger

Signed-off-by: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-23 09:45:23 -07:00
Anil S Keshavamurthy
a5403183d8 [PATCH] Kprobes IA64: arch_prepare_kprobes() cleanup
arch_prepare_kprobes() was doing lots of functionality
in just one single function. This patch
attempts to clean up arch_prepare_kprobes() by moving
specific sub task to the following (new)functions
1)valid_kprobe_addr() -->> validate the given kprobe address
2)get_kprobe_inst(slot..)->> Retrives the instruction for a given slot from the bundle
3)prepare_break_inst() -->> Prepares break instruction within the bundle
	3a)update_kprobe_inst_flag()-->>Updates the internal flags, required
			for proper emulation of the instruction at later
			point in time.

Signed-off-by: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-23 09:45:23 -07:00
Rusty Lynch
13608d6433 [PATCH] Kprobes ia64 qp fix
Fix a bug where a kprobe still fires when the instruction is predicated
off.  So given the p6=0, and we have an instruction like:

(p6) move loc1=0

we should not be triggering the kprobe.  This is handled by carrying over
the qp section of the original instruction into the break instruction.

Signed-off-by: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com>
Signed-off-by: Rusty Lynch <Rusty.lynch@intel.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-23 09:45:23 -07:00
Rusty Lynch
8bc76772ad [PATCH] Kprobes ia64 cleanup
A cleanup of the ia64 kprobes implementation such that all of the bundle
manipulation logic is concentrated in arch_prepare_kprobe().

With the current design for kprobes, the arch specific code only has a
chance to return failure inside the arch_prepare_kprobe() function.

This patch moves all of the work that was happening in arch_copy_kprobe()
and most of the work that was happening in arch_arm_kprobe() into
arch_prepare_kprobe().  By doing this we can add further robustness checks
in arch_arm_kprobe() and refuse to insert kprobes that will cause problems.

Signed-off-by: Rusty Lynch <Rusty.lynch@intel.com>
Signed-off-by: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-23 09:45:23 -07:00
Anil S Keshavamurthy
cd2675bf65 [PATCH] Kprobes/IA64: support kprobe on branch/call instructions
This patch is required to support kprobe on branch/call instructions.

Signed-off-by: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-23 09:45:23 -07:00
Anil S Keshavamurthy
b2761dc262 [PATCH] Kprobes/IA64: architecture specific JProbes support
This patch adds IA64 architecture specific JProbes support on top of Kprobes

Signed-off-by: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com>
Signed-off-by: Rusty Lynch <Rusty.lynch@intel.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-23 09:45:22 -07:00
Anil S Keshavamurthy
fd7b231ff9 [PATCH] Kprobes/IA64: arch specific handling
This is an IA64 arch specific handling of Kprobes

Signed-off-by: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com>
Signed-off-by: Rusty Lynch <Rusty.lynch@intel.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-23 09:45:22 -07:00
Anil S Keshavamurthy
7213b25218 [PATCH] Kprobes/IA64: kdebug die notification mechanism
As many of you know that kprobes exist in the main line kernel for various
architecture including i386, x86_64, ppc64 and sparc64.  Attached patches
following this mail are a port of Kprobes and Jprobes for IA64.

I have tesed this patches for kprobes and Jprobes and this seems to work fine.
 I have tested this patch by inserting kprobes on various slots and various
templates including various types of branch instructions.

I have also tested this patch using the tool
http://marc.theaimsgroup.com/?l=linux-kernel&m=111657358022586&w=2 and the
kprobes for IA64 works great.

Here is list of TODO things and pathes for the same will appear soon.

1) Support kprobes on "mov r1=ip" type of instruction
2) Support Kprobes and Jprobes to exist on the same address
3) Support Return probes
3) Architecture independent cleanup of kprobes

This patch adds the kdebug die notification mechanism needed by Kprobes.

For break instruction on Branch type slot, imm21 is ignored and value
zero is placed in IIM register, hence we need to handle kprobes
for switch case zero.

Signed-off-by: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com>
Signed-off-by: Rusty Lynch <Rusty.lynch@intel.com>

From: Rusty Lynch <rusty.lynch@intel.com>

At the point in traps.c where we recieve a break with a zero value, we can
not say if the break was a result of a kprobe or some other debug facility.

This simple patch changes the informational string to a more correct "break
0" value, and applies to the 2.6.12-rc2-mm2 tree with all the kprobes
patches that were just recently included for the next mm cut.
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-23 09:45:22 -07:00
Christoph Lameter
b5d23e5b8c [PATCH] ia64: Selectable Timer Interrupt Frequency
It allows a selectable timer interrupt frequency of 100, 250 and 1000 HZ.
Reducing the timer frequency may have important performance benefits on
large systems.

Signed-off-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-23 09:45:10 -07:00
Dave Hansen
0e19243e9a [PATCH] update all defconfigs for ARCH_DISCONTIGMEM_ENABLE
This will at least suppress one prompt that users would have received the
first time they compile with the new DISCONTIG arch option.  They'll still
get the "Memory Model" prompt, but 99% of them will have the default work
there.

Signed-off-by: Dave Hansen <haveblue@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-23 09:45:02 -07:00
Dave Hansen
3f22ab276b [PATCH] make each arch use mm/Kconfig
For all architectures, this just means that you'll see a "Memory Model"
choice in your architecture menu.  For those that implement DISCONTIGMEM,
you may eventually want to make your ARCH_DISCONTIGMEM_ENABLE a "def_bool
y" and make your users select DISCONTIGMEM right out of the new choice
menu.  The only disadvantage might be if you have some specific things that
you need in your help option to explain something about DISCONTIGMEM.

Signed-off-by: Dave Hansen <haveblue@us.ibm.com>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-23 09:45:02 -07:00
Dave Hansen
408fde81c1 [PATCH] remove non-DISCONTIG use of pgdat->node_mem_map
This patch effectively eliminates direct use of pgdat->node_mem_map outside
of the DISCONTIG code.  On a flat memory system, these fields aren't
currently used, neither are they on a sparsemem system.

There was also a node_mem_map(nid) macro on many architectures.  Its use
along with the use of ->node_mem_map itself was not consistent.  It has
been removed in favor of two new, more explicit, arch-independent macros:

	pgdat_page_nr(pgdat, pagenr)
	nid_page_nr(nid, pagenr)

I called them "pgdat" and "nid" because we overload the term "node" to mean
"NUMA node", "DISCONTIG node" or "pg_data_t" in very confusing ways.  I
believe the newer names are much clearer.

These macros can be overridden in the sparsemem case with a theoretically
slower operation using node_start_pfn and pfn_to_page(), instead.  We could
make this the only behavior if people want, but I don't want to change too
much at once.  One thing at a time.

This patch removes more code than it adds.

Compile tested on alpha, alpha discontig, arm, arm-discontig, i386, i386
generic, NUMAQ, Summit, ppc64, ppc64 discontig, and x86_64.  Full list
here: http://sr71.net/patches/2.6.12/2.6.12-rc1-mhp2/configs/

Boot tested on NUMAQ, x86 SMP and ppc64 power4/5 LPARs.

Signed-off-by: Dave Hansen <haveblue@us.ibm.com>
Signed-off-by: Martin J. Bligh <mbligh@aracnet.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-23 09:45:00 -07:00
Linus Torvalds
fb7a0e3653 Merge kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6.git
Do arch/ia64/defconfig by hand.
2005-06-22 12:22:12 -07:00
Brent Casavant
e5d310b349 [PATCH] ioc4: CONFIG split
The SGI IOC4 I/O controller chip drivers are currently all configured by
CONFIG_BLK_DEV_SGIIOC4.  This is undesirable as not all IOC4 hardware features
are needed by all systems.

This patch adds two configuration variables, CONFIG_SGI_IOC4 for core IOC4
driver support (see patch 1/3 in this series for further explanation) and
CONFIG_SERIAL_SGI_IOC4 to independently enable serial port support.

Signed-off-by: Brent Casavant <bcasavan@sgi.com>
Acked-by: Pat Gefre <pfg@sgi.com>
Acked-by: Jeremy Higdon <jeremy@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-21 18:46:32 -07:00
Jes Sorensen
65ed0b337b [PATCH] SN2 XPC build patches
This patch contains the bits to make the XPC code use the uncached
allocator rather than calling into the mspec driver.  It also includes the
mspec.h header which is required to build the XPC modules.

Signed-off-by: Jes Sorensen <jes@wildopensource.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-21 18:46:18 -07:00
Jes Sorensen
f14f75b811 [PATCH] ia64 uncached alloc
This patch contains the ia64 uncached page allocator and the generic
allocator (genalloc).  The uncached allocator was formerly part of the SN2
mspec driver but there are several other users of it so it has been split
off from the driver.

The generic allocator can be used by device driver to manage special memory
etc.  The generic allocator is based on the allocator from the sym53c8xx_2
driver.

Various users on ia64 needs uncached memory.  The SGI SN architecture requires
it for inter-partition communication between partitions within a large NUMA
cluster.  The specific user for this is the XPC code.  Another application is
large MPI style applications which use it for synchronization, on SN this can
be done using special 'fetchop' operations but it also benefits non SN
hardware which may use regular uncached memory for this purpose.  Performance
of doing this through uncached vs cached memory is pretty substantial.  This
is handled by the mspec driver which I will push out in a seperate patch.

Rather than creating a specific allocator for just uncached memory I came up
with genalloc which is a generic purpose allocator that can be used by device
drivers and other subsystems as they please.  For instance to handle onboard
device memory.  It was derived from the sym53c7xx_2 driver's allocator which
is also an example of a potential user (I am refraining from modifying sym2
right now as it seems to have been under fairly heavy development recently).

On ia64 memory has various properties within a granule, ie.  it isn't safe to
access memory as uncached within the same granule as currently has memory
accessed in cached mode.  The regular system therefore doesn't utilize memory
in the lower granules which is mixed in with device PAL code etc.  The
uncached driver walks the EFI memmap and pulls out the spill uncached pages
and sticks them into the uncached pool.  Only after these chunks have been
utilized, will it start converting regular cached memory into uncached memory.
Hence the reason for the EFI related code additions.

Signed-off-by: Jes Sorensen <jes@wildopensource.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-21 18:46:18 -07:00
David Gibson
63551ae0fe [PATCH] Hugepage consolidation
A lot of the code in arch/*/mm/hugetlbpage.c is quite similar.  This patch
attempts to consolidate a lot of the code across the arch's, putting the
combined version in mm/hugetlb.c.  There are a couple of uglyish hacks in
order to covert all the hugepage archs, but the result is a very large
reduction in the total amount of code.  It also means things like hugepage
lazy allocation could be implemented in one place, instead of six.

Tested, at least a little, on ppc64, i386 and x86_64.

Notes:
	- this patch changes the meaning of set_huge_pte() to be more
	  analagous to set_pte()
	- does SH4 need s special huge_ptep_get_and_clear()??

Acked-by: William Lee Irwin <wli@holomorphy.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-21 18:46:15 -07:00
Martin Hicks
753ee72896 [PATCH] VM: early zone reclaim
This is the core of the (much simplified) early reclaim.  The goal of this
patch is to reclaim some easily-freed pages from a zone before falling back
onto another zone.

One of the major uses of this is NUMA machines.  With the default allocator
behavior the allocator would look for memory in another zone, which might be
off-node, before trying to reclaim from the current zone.

This adds a zone tuneable to enable early zone reclaim.  It is selected on a
per-zone basis and is turned on/off via syscall.

Adding some extra throttling on the reclaim was also required (patch
4/4).  Without the machine would grind to a crawl when doing a "make -j"
kernel build.  Even with this patch the System Time is higher on
average, but it seems tolerable.  Here are some numbers for kernbench
runs on a 2-node, 4cpu, 8Gig RAM Altix in the "make -j" run:

			wall  user   sys   %cpu  ctx sw.  sleeps
			----  ----   ---   ----   ------  ------
No patch		1009  1384   847   258   298170   504402
w/patch, no reclaim     880   1376   667   288   254064   396745
w/patch & reclaim       1079  1385   926   252   291625   548873

These numbers are the average of 2 runs of 3 "make -j" runs done right
after system boot.  Run-to-run variability for "make -j" is huge, so
these numbers aren't terribly useful except to seee that with reclaim
the benchmark still finishes in a reasonable amount of time.

I also looked at the NUMA hit/miss stats for the "make -j" runs and the
reclaim doesn't make any difference when the machine is thrashing away.

Doing a "make -j8" on a single node that is filled with page cache pages
takes 700 seconds with reclaim turned on and 735 seconds without reclaim
(due to remote memory accesses).

The simple zone_reclaim syscall program is at
http://www.bork.org/~mort/sgi/zone_reclaim.c

Signed-off-by: Martin Hicks <mort@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-21 18:46:14 -07:00
Tony Luck
29516d75a0 Auto merge with /home/aegl/GIT/linus 2005-06-21 16:21:20 -07:00
Matthew Chapman
4ea78729b8 [IA64] ptrace and restore_sigcontext() allow ar.rsc.pl==0
This patch fixes handling of accesses to ar.rsc via ptrace & restore_sigcontext
[With Thanks to Chris Wright for noticing the restore_sigcontext path]

Signed-off-by: Matthew Chapman <matthewc@hp.com>
Acked-by: David Mosberger <davidm@hpl.hp.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-06-21 16:19:20 -07:00
Bjorn Helgaas
7b404b3459 [IA64] remove "pci=routeirq" option
Remove "pci=routeirq" option for ia64.  This was a workaround
after ACPI IRQ routing was changed from "all at boot for everything
in _PRT" to "do it when the device is enabled" in case there were
drivers that didn't use pci_enable_device().

Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-06-21 15:04:39 -07:00
Ken Chen
0393eed5c3 [IA64] fix nested_dtlb_miss handler for hugetlb address
The nested_dtlb_miss handler currently does not handle fault from
hugetlb address correctly.  It walks the page table assuming PAGE_SIZE.
Thus when taking a fault triggered from hugetlb address, it would not
calculate the pgd/pmd/pte address correctly and thus result an incorrect
invocation of ia64_do_page_fault().  In there, kernel will signal SIGBUS
and application dies (The faulting address is perfectly legal and we
have a valid pte for the corresponding user hugetlb address as well).
This patch fix the described kernel bug.  Since nested_dtlb_miss is a
rare event and a slow path anyway, I'm making the change without #ifdef
CONFIG_HUGETLB_PAGE for code readability.  Tony, please apply.

Signed-off-by: Ken Chen <kenneth.w.chen@intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-06-21 14:40:31 -07:00
Christophe Lucas
52a0de2cd2 [IA64] printk needs KERN_INFO arch/ia64/kernel/smp.c
printk() calls should include appropriate KERN_* constant.

Signed-off-by: Christophe Lucas <clucas@rotomalug.org>
Signed-off-by: Domen Puncer <domen@coderock.org>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-06-21 14:21:17 -07:00
Greg Edwards
a35f1e03b8 [IA64] enable SGI simulator for generic kernels
Allow the SGI simulator (medusa) to work on generic kernels.  There is
no inherent dependency on an sn2-specific kernel.

Boot tested on Altix, medusa and HP rx2600.

Signed-off-by: Greg Edwards <edwardsg@sgi.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-06-21 14:17:43 -07:00
Tony Luck
bd91c4bb13 [IA64] Refresh tiger_defconfig
Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-06-21 14:16:00 -07:00
Greg Edwards
95dccdfe29 [IA64] refresh arch/ia64/defconfig
Refresh arch/ia64/defconfig, as it was getting a bit stale.  The only
manual changes I made were:

CONFIG_SCSI_SATA=y		needed for some Altix base I/O cards
CONFIG_SCSI_SATA_VITESSE=y

CONFIG_DM_MULTIPATH=m		the rest are already modules

CONFIG_FUSION_SPI=y		new driver breakout
CONFIG_FUSION_FC=m

CONFIG_SGI_TIOCX=y		enable some other SGI drivers
CONFIG_SGI_MBCS=m
CONFIG_AGP_SGI_TIOCA=m

Boot tested on Altix, HP rx2600 and Intel Tiger

Signed-off-by: Greg Edwards <edwardsg@sgi.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-06-21 14:01:05 -07:00
Yani Ioannou
ff381d2223 [PATCH] Driver Core: arch: update device attribute callbacks
Signed-off-by: Yani Ioannou <yani.ioannou@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-06-20 15:15:32 -07:00
Patrick Mochel
6623415687 [PATCH] sn: fixes due to driver core changes
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-06-20 15:15:28 -07:00
David Mosberger-Tang
34b727c135 [IA64] Drop spurious paren in entry.h
The latest assembler catches this typo.  (reported by Jim Wilson).

Signed-off-by: David Mosberger-Tang <davidm@hpl.hp.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-06-20 09:34:02 -07:00
Tony Luck
f2cbb4f019 Auto merge with /home/aegl/GIT/linus 2005-06-15 14:06:48 -07:00
Christoph Lameter
a2a64769d0 [IA64] Fix race condition in the rt_sigprocmask fastcall
current->blocked will be set to the value of current->thread_info->flags if the
cmpxchg to update thread_info->flags fails. For performance reasons the store into
current->blocked was placed in the cmpxchg loop. However, the cmpxchg overwrites the
register holding the value to be stored. In the rare case of a retry the value of
thread_info->flags will be written into current->blocked.

The fix is to use another register so that the register containing the current->blocked
value is not overwritten.

Signed-off-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-06-09 13:04:30 -07:00
Peter Chubb
05062d96a2 [PATCH] ia64: fix floating-point preemption problem
There've been reports of problems with CONFIG_PREEMPT=y and the high
floating point partition.  This is caused by the possibility of preemption
and rescheduling on a different processor while saving or restioirng the
high partition.

The only places where the FPU state is touched are in ptrace, in
switch_to(), and where handling a floating-point exception.  In switch_to()
preemption is off.  So it's only in trap.c and ptrace.c that we need to
prevent preemption.

Here is a patch that adds commentary to make the conditions clear, and adds
appropriate preempt_{en,dis}able() calls to make it so.  In trap.c I use
preempt_enable_no_resched(), as we're about to return to user space where
the preemption flag will be checked anyway.

Signed-off-by: Peter Chubb <peterc@gelato.unsw.edu.au>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-08 16:21:14 -07:00
Keith Owens
70aa488cff [IA64] Extract correct break number for break.b
break.b does not store the break number in cr.iim, instead it stores 0,
which makes all break.b instructions look like BUG().  Extract the
break number from the instruction itself.

Signed-off-by: Keith Owens <kaos@sgi.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-06-08 12:25:24 -07:00
Tony Luck
86ebacd360 [IA64] Update comment to describe modes set in default control register.
Christian Hildner pointed out that the comment did not match what the
code does in cpu_init() when we set up the default control register.
Patch based on suggestions from Ken Chen.

Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-06-08 12:12:48 -07:00
Keith Owens
866ba633a8 [IA64] Module gp must point to valid memory
Some bits of the kernel assume that gp always points to valid memory,
in particular PHYSICAL_MODE_ENTER() assumes that both gp and sp are
valid virtual addresses with associated physical pages.  The IA64
module loader puts gp well past the end of the module, with no physical
backing.  Offsets on gp are still valid, but physical mode addressing
breaks for modules.  Ensure that gp always falls within the module
body.  Also ensure that gp is 8 byte aligned.

Signed-off-by: Keith Owens <kaos@sgi.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-06-08 11:41:31 -07:00
David Mosberger-Tang
ad597bd518 [IA64] Fill holes in FIXADDR_USER space with zero pages.
This fixes an oops reported by Jason Baron.

Signed-off-by: David Mosberger-Tang <davidm@hpl.hp.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-06-08 10:58:21 -07:00
Dean Nelson
ff89bf3bc0 [IA64] fix setting of sn_hub_info->shub_1_1_found
Fix a bug in which shub_1_1_found is not being properly initialized or set,
resulting in the improper setting of sn_hub_info->shub_1_1_found.

Signed-off-by: Dean Nelson <dcn@sgi.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-06-03 12:37:53 -07:00
Peter Chubb
d8caebd285 [IA64] fix compilation warning in sys32_epoll_wait()
This gets rid of an unused variable `error' in sys_ia32.c:sys32_epoll_wait()

Getting rid of this one makes parsing the output of the kernecomp
autobuild easier --- searching for `Error' to find a problem kept
hitting this one, even though it's only a warning.

Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-06-01 15:44:01 -07:00
Peter Chubb
b655913bf3 [IA64] Cleanup compile warnings for ski config
The attached patch cleans up a compilation warning when ACPI
is turned off (i.e., when compiling for the Ski simulator).

Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-06-01 15:20:17 -07:00
Tony Luck
fffcc150a2 [IA64] Use "PER_CPU" form of EXPORT macro
I was gently reminded that there are per-cpu forms of the EXPORT_SYMBOL macros.

Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-05-31 10:38:32 -07:00
Zhang Yanmin
d11cf326bd [IA64] sys_mmap doesn't follow posix.1 when parameter len=0
In IA64 kernel, sys_mmap calls do_mmap2 and do_mmap2 returns addr if
len=0, which means the mmap sys call succeeds.

Posix.1 says:
The mmap() function shall fail if:
[EINVAL] The value of len is zero. 

Here is a patch to fix it.

Signed-off-by: Zhang Yanmin <yanmin.zhang@intel.com>
Acked-by: David Mosberger <davidm@hpl.hp.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-05-26 10:19:07 -07:00
Tony Luck
fe12e25ebd [IA64] initialize spinlock pfm_alt_install_check
I applied the penultimate version of the perfmon patch, which didn't have
the initialization of the new spinlock that was added.

Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-05-18 17:09:06 -07:00
Tony Luck
a1ecf7f6e6 [IA64] alternate perfmon handler
Patch from Charles Spirakis

Some linux customers want to optimize their applications on the latest
hardware but are not yet willing to upgrade to the latest kernel. This
patch provides a way to plug in an alternate, basic, and GPL'ed PMU
subsystem to help with their monitoring needs or for specialty work. It
can also be used in case of serious unexpected bugs in perfmon. Mutual
exclusion between the two subsystems is guaranteed, hence no conflict
can arise from both subsystem being present.

Acked-by: Stephane Eranian <eranian@hpl.hp.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-05-18 16:14:30 -07:00
Tony Luck
325a479c4c Merge with temp tree to get David's gdb inferior calls patch 2005-05-17 15:53:14 -07:00
David Mosberger-Tang
7f9eaedf89 [IA64] Fix convert_to_non_syscall() so gdb inferior calls work again
Fix convert_to_non_syscall() so it arranges for the kernel to be left
via ia64_leave_kernel() rather than ia64_leave_syscall().  The latter
no longer tolerates being called with pSys=0 and pNonSys=1.

Signed-off-by: David Mosberger-Tang <davidm@hpl.hp.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-05-17 14:07:10 -07:00
Russ Anderson
6872ec5489 [IS64-SGI] Set Altix error handling features
The 2.6 kernel has CPE error thresholding.
This patch lets SAL know of this error handling feature.
The changes are SN specific.

Signed-off-by: Russ Anderson (rja@sgi.com)
Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-05-17 13:53:21 -07:00
Russ Anderson
bb68c12b40 [IA64-SGI] cpe interrupts are not being enabled.
acpi_request_vector() is called in ia64_mca_init() to get the cpe_vector.
The problem is that acpi_request_vector() looks in platform_intr_list[] to 
get the vector, but platform_intr_list[] is not initialized with a valid
vector until later (in sn_setup()).  Without a valid vector the code
defaults to polling mode.

This patch moves the call to acpi_request_vector() from ia64_mca_init()
to ia64_mca_late_init(), which is after platform_intr_list[] is initialized.

Signed-off-by: Russ Anderson (rja@sgi.com)
Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-05-17 12:52:43 -07:00
David Mosberger-Tang
02a017a9f3 [IA64] Correct convert_to_non_syscall()
convert_to_non_syscall() has the same problem that unwind_to_user()
used to have.  Fix it likewise.

Signed-off-by: David Mosberger-Tang <davidm@hpl.hp.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-05-17 12:33:15 -07:00
Tony Luck
d0dac8082c Merge with linus 2005-05-17 09:10:20 -07:00
Christoph Hellwig
5418b6925c [PATCH] kill <asm/ioctl32.h>
These days <linux/ioctl32.h> handles everything, no need for an asm
header on just two architectures.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-05-17 07:59:21 -07:00
David Mosberger-Tang
bfd6859408 [IA64] Avoid .spillpsp directive in handcoded assembly
Some time ago, GAS was fixed to bring the .spillpsp directive in line
with the Intel assembler manual (there was some disagreement as to
whether or not there is a built-in 16-byte offset).  Unfortunately,
there are two places in the kernel where this directive is used in
handwritten assembly files and those of course relied on the "buggy"
behavior.  As a result, when using a "fixed" assembler, the kernel
picks up the UNaT bits from the wrong place (off by 16) and randomly
sets NaT bits on the scratch registers.  This can be noticed easily by
looking at a coredump and finding various scratch registers with
unexpected NaT values.  The patch below fixes this by using the
.spillsp directive instead, which works correctly no matter what
assembler is in use.

Signed-off-by: David Mosberger-Tang <davidm@hpl.hp.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-05-10 13:52:00 -07:00
David Mosberger-Tang
66302f211a [IA64] fix "section mismatch" compile-time-error
I noticed this typo when trying to compile a kernel which had
CONFIG_HOTPLUG turned off.  In that case, __devinit is no longer a
no-op and the compiler then detects a section-conflict.  Fix by using
__devinitdata instead of __devinit.

Same patch also submitted by Darren Williams to fix compilation error
using sim_defconfig (which has CONFIG_HOTPLUG=n).

Signed-off-by: David Mosberger-Tang <davidm@hpl.hp.com>
Signed-off-by:  Darren Williams <dsw@gelato.unsw.edu.au>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-05-09 10:16:17 -07:00
David Mosberger-Tang
966dc11fcc [IA64] Fix stack placement when INIT hits in kernel mode.
Without this patch, the stack is placed _below_ the current task
structure, which is risky at best.

Tony, I think this patch needs to go into 2.6.12, since it fixes a
real bug.  Without it, INIT may case secondary errors, which would be
most unpleasant.

Signed-off-by: David Mosberger-Tang <davidm@hpl.hp.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-05-06 10:16:07 -07:00
Anton Blanchard
7d12e522ba [PATCH] ppc64: remove hidden -fno-omit-frame-pointer for schedule.c
While looking at code generated by gcc4.0 I noticed some functions still
had frame pointers, even after we stopped ppc64 from defining
CONFIG_FRAME_POINTER.  It turns out kernel/Makefile hardwires
-fno-omit-frame-pointer on when compiling schedule.c.

Create CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER and define it on architectures
that dont require frame pointers in sched.c code.

(akpm: blame me for the name)

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-05-05 16:36:32 -07:00
David Mosberger-Tang
ebcc80c1b6 [IA64] Merge audit fix for fsyscalls with syscall-optimizations
Signed-off-by: David Mosberger-Tang <davidm@hpl.hp.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-05-05 11:30:48 -07:00
David Woodhouse
bfd4bda097 Merge with master.kernel.org:/pub/scm/linux/kernel/git/torvalds/linux-2.6.git 2005-05-05 13:59:37 +01:00
Dean Nelson
9b48b46678 [IA64-SGI] move nodepda pointer out of pda
Remove the p_nodepda and p_subnodepda pointers from the pda_s structure.
And then define a new per-cpu pointer to the nodepda and export it so
that it can be accessed by kernel modules.

Signed-off-by: Dean Nelson <dcn@sgi.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-05-04 10:18:32 -07:00
Tony Luck
c4b07b7b36 [IA64] Update arch/ia64/configs/tiger_defconfig
Kristen did most of the checking, bring this up to -rc2.

Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-05-03 16:27:44 -07:00
Tony Luck
a71f62edc9 [IA64] Fix two warnings introduced by perfmon patches.
Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-05-03 16:21:45 -07:00
stephane eranian
a5a70b75d9 [IA64] another perfmon fix (take2)
- pfm_context_load(): change return value from EINVAL to EBUSY
  when context is already loaded.

- pfm_check_task_state(): pass test if context state is MASKED.
  It is safe to give access on PFM_CTX_MASKED because the PMU
  state (PMD) is stable and saved in software state.
  This helps multiplexing programs such as the example given
  in libpfm-3.1.

Signed-off-by: stephane eranian <eranian@hpl.hp.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-05-03 15:47:58 -07:00
Stephane Eranian
8df5a500a3 [IA64] perfmon & PAL_HALT again
The pmu_active test is based on the values of PSR.up. THIS IS THE PROBLEM as
it does not take into account the lazy restore logic which is as follow (simplified):

context switch out:
	save PMDs
	clear psr.up
	release ownership

context switch in:
	if (ctx->last_cpu == smp_processor_id() && ctx->cpu_activation == cpu_activation) {
		set psr.up
		return
	}
	restore PMD
	restore PMC
	ctx->last_cpu   = smp_processor_id();
	ctx->activation = ++cpu_activation;
	set psr.up

The key here is that on context switch out, we clear psr.up and on context switch in
we check if nobody else used the PMU on that processor since last time we came. In
that case, we assume the PMD/PMC are ours and we simply reactivate.

The Caliper problem is that between the moment we context switch out and the moment we
come back, nobody effectively used the PMU BUT the processor went idle. Normally this
would have no incidence but PAL_HALT does alter the PMU registers.  In default_idle(),
the test on psr.up is not strong enough to cover this case and we go into PAL which
trashed the PMU resgisters. When we come back we falsely assume that this is our state
yet it is corrupted. Very nasty indeed.

To avoid the problem it is necessary to forbid going to PAL_HALT as soon as perfmon
installs some valid state in the PMU registers. This happens with an application
attaches a context to a thread or CPU. It is not enough to check the psr/dcr bits.
Hence I propose the attached patch. It adds a callback in process.c to modify the
condition to enter PAL on idle. Basically, now it is conditional to pal_halt=1 AND
perfmon saying it is okay.

Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-05-03 15:44:48 -07:00
Mark Maule
3ea8b477b4 [IA64] altix: fix TIOCA dmamap list_add
Correct a bug where tioca_dma_mapped() is putting tioca dma map structs
on the wrong list.

Signed-off-by: Mark Maule <maule@sgi.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-05-03 13:52:22 -07:00
Keith Owens
32709d8ae6 [IA64] SAL to OS callbacks cannot call sleeping
When SAL calls back into the OS, the OS code is running with preempt
disabled so it cannot call sleeping functions.

Signed-off-by: Keith Owens <kaos@sgi.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-05-03 13:48:55 -07:00
Russ Anderson
b1b901c202 [IA64] MCA recovery improvements
Jack Steiner uncovered some opportunities for improvement in
the MCA recovery code.

  1) Set bsp to save registers on the kernel stack.
  2) Disable interrupts while in the MCA recovery code.
  3) Change the way the user process is killed, to avoid 
     a panic in schedule.

Testing shows that these changes make the recovery code much 
more reliable with the 2.6.12 kernel.

Signed-off-by: Russ Anderson <rja@sgi.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-05-03 13:47:42 -07:00
David Woodhouse
446b8831f5 [IA64] fix ia64 syscall auditing
Attached is a patch against David's audit.17 kernel that adds checks
for the TIF_SYSCALL_AUDIT thread flag to the ia64 system call and
signal handling code paths.  The patch enables auditing of system
calls set up via fsys_bubble_down, as well as ensuring that
audit_syscall_exit() is called on return from sigreturn.

Neglecting to check for TIF_SYSCALL_AUDIT at these points results in
incorrect information in audit_context, causing frequent system panics
when system call auditing is enabled on an ia64 system.

I have tested this patch and have seen no problems with it.

[Original patch from Amy Griffis ported to current kernel by David Woodhouse]

From: Amy Griffis <amy.griffis@hp.com>
From: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: Chris Wright <chrisw@osdl.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-05-03 13:45:39 -07:00
Zwane Mwaikambo
7d5f9c0f10 [IA64] reduce cacheline bouncing in cpu_idle_wait
Andi noted that during normal runtime cpu_idle_map is bounced around a lot,
and occassionally at a higher frequency than the timer interrupt wakeup
which we normally exit pm_idle from.  So switch to a percpu variable.

I didn't move things to the slow path because it would involve adding
scheduler code to wakeup the idle thread on the cpus we're waiting for.

Signed-off-by: Zwane Mwaikambo <zwane@arm.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-05-03 13:40:18 -07:00
Mike Habeck
de7548d0e2 [IA64-SGI] Altix only: Fix for sn_dma_flush
The following patch fixes a bug in the SGI Altix sn_dma_flush code.  
sn_dma_flush is broken in 2.6.  The code isn't waiting for the DMA 
data to be flushed out of the PIC ASIC. This patch is based off the 
linux-ia64-test-2.6.12 tree

Signed-off-by: Mike Habeck <habeck@sgi.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-05-03 13:36:09 -07:00
Alex Williamson
bb0fc08545 [IA64] use common pxm function
This patch simplifies a couple places where we search for _PXM
values in ACPI namespace.  Thanks,

Signed-off-by: Alex Williamson <alex.williamson@hp.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-05-03 13:33:18 -07:00
Colin Ngam
c0b12422e5 [IA64-SGI] Altix only: Register Error Interrupt
The following patch ensures that the correct error interrupt handling 
routine is initialized.  This patch is based on the 2.6.12 ia64 release tree.

Signed-off-by: Colin Ngam <cngam@sgi.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-05-03 13:21:03 -07:00
Dean Nelson
3a7d555bfc [IA64-SGI] convert AMO address found in XPC's reserved page
This patch detects the existence of an uncached physical AMO address setup
by EFI's XPBOOT (SGI) and converts it to an uncached virtual AMO address.
Depends on a patch submitted on 23 March 2005 with the subject of:
    [PATCH 2/3] SGI Altix cross partition functionality (2nd revision)

Signed-off-by: Dean Nelson <dcn@sgi.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-05-03 12:50:22 -07:00
Dean Nelson
a2d974da0a [IA64-SGI] SGI Altix cross partition functionality [3/3]
This patch contains the cross partition pseudo-ethernet driver (XPNET)
functional support module.

Signed-off-by: Dean Nelson <dcn@sgi.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-05-03 12:37:19 -07:00
Dean Nelson
89eb8eb927 [IA64-SGI] SGI Altix cross partition functionality [2/3]
This patch contains the communication module (XPC) for cross partition
communication on a partitioned SGI Altix.

Signed-off-by: Dean Nelson <dcn@sgi.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-05-03 12:36:00 -07:00
Tony Luck
21223a9e78 [IA64] manually apply changes to arch/ia64/sn/kernel/Makefile
cg-patch couldn't apply the patch to Makefile, and my dumb script
rushed on and ran cg-commit without this change.

Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-05-03 12:25:50 -07:00
Dean Nelson
b0d82bd5df [IA64-SGI] SGI Altix cross partition functionality (2nd
This patch contains the shim module (XP) which interfaces between the
communication module (XPC) and the functional support modules (like XPNET).

Signed-off-by: Dean Nelson <dcn@sgi.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-05-03 12:16:52 -07:00
Dean Nelson
2e34f07ff0 [PATCH] move cnodeid_to_nasid_table out of pda
Another step in the effort to eliminate the SN pda structure.
This patch moves the cnodeid_to_nasid_table field out of the pda,
making it a standalone per-cpu data item, and exports it so it can
be accessed by kernel modules.

Signed-off-by: Dean Nelson <dcn@sgi.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-05-03 12:07:46 -07:00
Bruce Losure
ce0a3956b3 [IA64-SGI] Altix patch to add bricktype knowledge to tiocx
Here is a patch to enable the SGI tiocx bus driver to distingush between
FPGA-attached h/w and non-FPGA-attached h/w.

Signed-off-by: Bruce Losure <blosure@sgi.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-05-03 12:01:07 -07:00
Bruce Losure
c2d1d65ad4 [IA64-SGI] Altix only: Remove hubdev SAL call
Hi Tony,

This patch against ia64-test-2.6.12 fixes a bug where the tiocx code
was inadvertently un-doing some address modifications done in earlier
fixup code.    This patch just removes the offending code.

Signed-off-by: Bruce Losure <blosure@sgi.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-05-03 11:58:37 -07:00
David Mosberger-Tang
2074615a13 [IA64] use fc.i for fluch_icache_range()
This is a small patch to switch fluch_icache_range() to use fc.i
instead of fc.  This would save time on processors which can establish
i-cache coherency without flushing the cache-line out to memory (not
that any current processors do).  On existing processors, fc.i behaves
like fc.  The only caveat is that very old assemblers may not know
about fc.i yet.

Signed-off-by: David Mosberger-Tang <davidm@hpl.hp.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-05-03 11:27:33 -07:00
David Mosberger-Tang
9df6f705c0 [IA64] fix typos caught by new assembler
Patch below fixes 3 trivial typos which are caught by the new
assembler (v2.169.90).  Please apply.

[Note: fix to memcpy that was also part of this patch was separately
 applied from patches by H.J. and Andreas ... so the delta here only
 has the other two fixes. -Tony]

Signed-off-by: David Mosberger-Tang <davidm@hpl.hp.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-05-03 10:56:42 -07:00
Andreas Schwab
512f64295f [IA64] Fix memcpy_mck.S for current binutils
The current ia64 assembler complains about mismatching .proc/.endp pairs.
(Same patch also sent by H.J. Lu)

Signed-off-by: Andreas Schwab <schwab@suse.de>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-05-03 10:49:29 -07:00
Suresh Siddha
7a9bdd8842 [IA64] Add config SCHED_SMT
Now that we have MC/MT detection patches in, appended patch allows us to
configure MT scheduler optimizations. For now, we will this option off
by default.

There is some discussion going on lkml about setting up sched-domains 
which are absolutely needed (like for example, we shouldn't setup SMT domain
for non MT processors). Once that patch goes in, we can enable this option by
default.

Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-05-03 10:33:28 -07:00
David Woodhouse
27b030d58c Merge with master.kernel.org:/pub/scm/linux/kernel/git/torvalds/linux-2.6.git 2005-05-03 08:14:09 +01:00
Jesper Juhl
7ed20e1ad5 [PATCH] convert that currently tests _NSIG directly to use valid_signal()
Convert most of the current code that uses _NSIG directly to instead use
valid_signal().  This avoids gcc -W warnings and off-by-one errors.

Signed-off-by: Jesper Juhl <juhl-lkml@dif.dk>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-05-01 08:59:14 -07:00
Stephen Rothwell
7d87e14c23 [PATCH] consolidate sys_shmat
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-05-01 08:59:12 -07:00