Config ini item gEnableFwSelfRecovery is obsolete and no longer used
hence remove it.
Change-Id: I3b7f8662cb42f74d217dbdf3b2c3512176e2833e
CRs-Fixed: 2202033
When the channel list contains only 2.4Ghz channels and
bandwidth is coming as 80Mhz in __wlan_hdd_cfg80211_do_acs(),
max weight gets assigned to all the channels irrespective of
scan results and channel 1 gets selected in the end.
Downgrade bandwidth to 40Mhz if channel list contains only 2.4Ghz
channels and bandwidth is coming as 80Mhz.
Change-Id: I0e54b5db0020768c219acc0d864e72813c9185e9
CRs-Fixed: 2193438
While the driver is in FTM state, if a PDR is encountered
the driver is not allowed to recover.
Allow the recovery of the driver after PDR in FTM mode.
Change-Id: Ib4ee3970067a9fde5ba12d4dd954774a16ef0255
CRs-Fixed: 2181509
qcacld-2.0 to qcacld-3.0 Propagation.
Revert the changes of Validating NLA attr in
wlan_hdd_cfg80211_ocb_set_config API to fix the
dsrc_config fail issue.
CRs-Fixed: 2109727
Change-Id: I5037498a510820a86cba9e61149640a957b46086
Currently, hdd_reset_all_adapters will set hdd_reassoc_scenario
as "false" no matter what adapter's dev mode. It may pollute the
session.ap's content.
Change-Id: I339982e5454d7ef5bd4325b0901c4a81ceed6ab9
CRs-Fixed: 2201535
Change "qcacmn: Introduce new versions of TDLS peer callbacks"
(Change-Id Id4ea23266b0f3e1480b645c5afce6c17585ccb46 in project
qca-wifi-host-cmn) introduced a new interface which removed an unused
parameter and changed obsolete naming. Update qcacld-3.0 to use this
new interface.
Change-Id: I5c4684ac0a62f314da26f92ece2c9a9874d63634
CRs-Fixed: 2200993
The hdd_reset_all_adapters won't reset the txrx_vdev & tx_fn in the
adapter, which will cause the issue if the OS still deliver the packet
before the txrx_vdev registered again after SSR happens.
Deinit TX/RX module when doing reset all adapters during the SSR
procedure to avoid this problem.
Change-Id: Ia16b488c63b691fe9c3cc8c2cd49913b27cc32f0
CRs-Fixed: 2197248
In the present scenario, the vendor command
wlan_hdd_cfg80211_get_logger_supp_feature has the flag
WIPHY_VENDOR_CMD_NEED_RUNNING set which requires the net device
to be up and running for the API to work. This is not necessary
as the command doesnot need the net dev to be active.
Remove the flag so that the command returns the proper results
even when the net device is not running
Change-Id: I2dd9d801aa474cda2a3f6292d6b94df18797be02
CRs-Fixed: 2202096
Latest driver is not using "gFixedRate" INI anymore and this INI
is not doing any meaningful work, so remove it.
Change-Id: Icf7ef052a722f25c4338dd8086b14ce01c6176d8
CRs-Fixed: 2201799
Add support to send ADDBA request with user configured buffer
size and tid and ADDBA response with user configured buffer
size.
Change-Id: I2a1dfedadeb68a1cfca9a6eba8e7775d0bb51d1a
CRs-Fixed: 2193872
If wlan_hdd_mgmt_tx is called while unload in progress, it is possible
ROC scan can't be canceled, cds_ssr_protect already prevent
wlan_hdd_mgmt_tx running before unloading, we must also prevent it
running after it.
Change-Id: Ic8d981c9be2a2b33079c4e3c9a18a4d8bce48956
CRs-Fixed: 2202026
Add compilation flag to compile out HTC credit History
feature cleanly from the cld-3.2 driver binary.
Change-Id: I5f5e73e430d282c99d3077fb82ed1cb8eb79715a
CRs-Fixed: 2190545
Change "qcacld-3.0: Use Request Manager for ioctl getWlanStats"
removed the only user of item hdd_qdf_event in struct hdd_wext_state,
so completely remove it.
Change-Id: Ifc00f6dc396ca5f6e59b3895a6c9467179073218
CRs-Fixed: 2202506
Currently the handling of private ioctl getWlanStats uses a legacy
mechanism for coordinating the request with the response. Change this
to use the HDD Request Manager.
Change-Id: I7e8333cf8d2e651e04509e3370c30d8a6425bdca
CRs-Fixed: 2202504
Function hdd_statistics_cb() is registered as a callback function by
__iw_get_statistics() when calling sme_get_statistics(). Since
hdd_statistics_cb() and __iw_get_statistics() are tightly coupled it
makes sense for them to be co-located, but currently they are
not. Therefore relocate hdd_statistics_cb() to be adjacent to
__iw_get_statistics(). Note that this is a precursor to further
cleanup of this pair of functions.
Change-Id: Ie36d107d9ef2e541444c5fb9d7bfba7e9e82c1e6
CRs-Fixed: 2201907
The parameters to function hdd_roam_register_tdlssta() currently
includes ucastSig. This "signature" parameter dates back to a previous
version of the driver that used signatures to synchronize the data
plane with the control plane. However the current version of the
driver does not use this parameter, so remove it as part of the plan
to completely remove these signatures from throughout the driver.
Change-Id: Iee51d79e58501e3e8312c6c7a21b98c1ae6bf268
CRs-Fixed: 2200886
The parameters to function hdd_softap_register_sta() currently include
ucastSig and bcastSig. These "signature" parameters date back to a
previous version of the driver that used these signatures to
synchronize the data plane with the control plane. However the current
version of the driver does not use these parameters, so remove them as
part of the plan to completely remove these signatures from throughout
the driver.
Change-Id: I1f1f1fb1ef553d36ba0f4902ab29b2b4852ae5ca
CRs-Fixed: 2200356
Add support for HW mode info vendor command which sends
mac id, band, interface id and frequency information for
each MAC provided by driver to userspace.
Change-Id: If1112d29b8781cf5ba0480c84feeb772142f2c0e
CRs-Fixed: 2160531
In IPA offload case, if wlan driver is loaded before IPA uC is ready,
error is returned in hdd_ipa_init, which leads to whole driver load
failure. This is not the case since IPA driver provides wlan driver
a notify callback where IPA will invoke this callback when IPA uC
is ready.
Fix is to not return error if IPA uC is not ready during wlan loading
phase.
Change-Id: I98382abbb3bb3b1176f3be41228ac260c1017c24
CRs-Fixed: 2198998
In wlan_hdd_add_age_ie the mgmt->u.probe_resp.variable is type casted
to qcom_ie_age, before incrementing the mgmt->u.probe_resp.variable
to get the qcom_ie_age pointer. This leads to memory corruption.
Fixed by typecasting the pointer once the qcom_ie_age pointer is
derived by incrementing the offset of qcom_ie_age from
mgmt->u.probe_resp.variable.
Change-Id: Iafcdb5c17f0d9c234687ddcc6f8b9100b21cc957
CRs-Fixed: 2201303
Duplicate API's are present in HDD and common code to inform the
beacon to kernel. This change removes the duplicate API from HDD
and use common API to inform beacon.
Change-Id: I1916ebd6d3c153f47533cde6a1e2e78ebaae55dc
CRs-Fixed: 2199760
Recent changes in Power Management and Offload (PMO) have removed the
need for a configurable maximum number of WoW filters. Remove the
following relevant fields:
* maxWoWFilters
* CFG_MAX_WOW_FILTERS_MAX
* WMA_STA_WOW_DEFAULT_PTRN_MAX
* max_wow_filters
* ol_ini_info
Change-Id: I99cc74731d6373258dc65473a8342bda0ab2786b
CRs-Fixed: 2199452
There are scenario where indoor channel operations
(like active / passive scan/connect/roam etc)
are not desired / permitted specially in sap case.
Hence add support of disabling indoor channel
on sap start and revert it on sap stop.
Change-Id: Id6e01534532e3076a3e662e6a4f71e8be924165a
CRs-fixed: 2121103
In order to conserve firmware memory when various filtering features are
not in use, update the target configuration provided to firmware based
on the intersection of various filtering features and host
configuration.
Part 1
num_wow_filters = ARP/NS offload enabled ? 2 : 5
bpf_instruction_size - BPF enabled ? 0 (auto) : 0xffffffff
Part 2 (pending firmware support)
pkt_filter_num = Packet Filter enabled ? 12 : 0 (disabled)
Change-Id: Ic6624ff04598b53d8321e4864618b12b9702780f
CRs-Fixed: 2196997
This reverts commit I87b635bf4644b54d47bee65307d7484c9e328885.
This should be used for uC loading debug purpose only.
If uC is not loaded yet when WLAN initialization, we are expecting
the registered uC ready callback is invoked after uC loaded later.
Change-Id: Ie6f6d116ff7a23a9b4900c60053a8e76948734d9
CRs-Fixed: 2196878
Hostapd sends channel list as NULL in do_acs request
when country mode is set to world and hw mode is 11a.
This results in scan to be triggered on all 5g channels
and driver to choose 5g channel as best channel.
Fix is to return error to hostapd if channel list
received is NULL.
Change-Id: I17aacfdbeea9803023a66f54de7b596612ea97c3
CRs-Fixed: 2192858
In the present scenario the function wlan_cfg80211_cleanup_scan_queue
does the code scan queue cleanup during radio detach, leading to access of
freed vdev netdev.
Extend cfg80211 scan cleanup API to support netdev level cleanup. The
second parameter if NULL cleans up all the queues or only the queue of
the specific net dev given.
Change-Id: I2a6b350fe5102b2a5d772dd9a075003ccf3b684c
CRs-Fixed: 2197309
The checkpatch script has identified instances of "Missing a blank
line after declarations" in HDD, so add them.
Change-Id: I289072b26e0c9c1f8392616438e304b018d9ecd2
CRs-Fixed: 2198555
Currently hdd_roam_deregister_sta() tests the STA to see if it is in
the eConnectionState_IbssDisconnected state, but then doesn't actually
do anything if it is true. Since this is obviously an obsolete test
where the action code has been previously removed, now remove the
actual test.
Change-Id: I6a0077088d87f91b8d8f220049de05a19232995b
CRs-Fixed: 2198554
WoW is always enabled on ROME and ADRASTEA platforms and wow
wake up pattern configuration is dynamic based on vdev type.
All wow wake up patterns are configured at the time of vdev
creation. HDD and SME has obsolete wow enter and exit logic
and hence nuke it.
Change-Id: I228ff5b77a7f9dac579448ada4ebee591d5a0c38
CRs-Fixed: 2198644
Current driver posts the high and low Tx TPUT indications to cnss-daemon to
tune the tcp_limit_output_byte system parameter. Add option to disable it.
Change-Id: Ic65fe0bd762024425cabf2f1f07123211dce5dce
CRs-Fixed: 2197112
ICM does not support hw_mode=any at present. When hw_mode is
set to any in hostapd.conf, HOST driver choose one band out of
2.4Ghz and 5Ghz based on "acs_freq_band" ini item and update the
ACS and PCL channel list accordingly. But currently driver does
not send updated band to ICM and so ICM still gets BAND_ALL from
HOST driver which is INVALID for ICM module. As a result ICM
algorithm does not run and channel selection fails.
Send Updated band to ICM and also update channel width accordingly
for 2.4Ghz band as it does not support 80/160/80PLUS80 Mhz.
Change-Id: I13593a3c59c204d1ff7677e67d96d039c9456568
CRs-Fixed: 2196247
The checkpatch script has identified an instance of a non-conformant
block comment in wlan_hdd_main.h, so fix it.
Change-Id: Ie76156601021e2b5e503280337b38792217b7dbc
CRs-Fixed: 2197711
The checkpatch script has identified instances of "else after return"
that is not conformant with the Linux coding style, so fix them.
Change-Id: Ica4ccb1ef1c865089851e928ddeaa27ea54bcb4a
CRs-Fixed: 2197681
The checkpatch script has identified multiple instances of non-conformant
indentation in HDD, so fix them.
Change-Id: Icb28911e54324198d50018fcaf6d6662c9dc161c
CRs-Fixed: 2197006
The checkpatch script has identified two instances of non-conformant
brace placement in HDD, so fix them.
Change-Id: I0c8bbf2258b24c4876c6a8749633b90873980e95
CRs-Fixed: 2196976
The qdf_str APIs have recently been moved from qdf_mem. Reference the
new qdf_str.h header file where appropriate.
Change-Id: I2be5fa3f511fd6d67b4217243f4b3498321e0a9f
CRs-Fixed: 2196120
Adds logic in frame parser to use default RSN IE fields if optional
fields are not present in IE. So if RSN IE doesn't contain AKM,
group and unicast cipher use the default AKM(AKM_IEEE8021X) and
cipher (CCMP). Also adds sanity checks for RSNE in the frame parser.
Change-Id: I120a29c21407f82aab2c6fcdcaf1095518cb71b5
CRs-Fixed: 2195951
Currently when the MAC address is changed dynamically, invalid MAC
(Broadcast, Multicast and 00:00:00:00:00:00) are getting accepted
and interface is getting up on these invalid addresses because
of this device is trying to connect to AP with the configured
invalid address.
To address this issue reject all invalid MAC addresses
when MAC is dynamically getting configured.
Change-Id: If2530b213b5ffc2ddf0bc728138e1f3200f33286
CRs-Fixed: 2190468
