It set roam offload flag to FW when vdev type is sta in
wma_vdev_attach, FW team think this isn't reasonable since it wastes
FW memory if sta isn't disconnected. And required to set this flag
when connected to AP, remove this flag after disconnect from AP.
Change-Id: I5edfb8d5a2cec0e2ffdf34349c99d477860f1339
CRs-Fixed: 2367135
Change Ia0fa016b174ef4b50e2cc339e4e476ec65642dbf ("qcacld-3.0: Use dfs
component support") removed all usage of struct wma_dfs_radar_ind.
Since it is now obsolete, remove the struct.
Change-Id: I9930dff34224a02f6a8bdc9a7fcdb362da1eb1bb
CRs-Fixed: 2379065
Change Iee7274fbc8ae985d034a29f920faa38aab68ccc7 ("qcacld-3.0: Add
VDEV state machine for STA disconnection") removed the implementation
of function wma_sta_send_vdev_down_bss(). However it left behind the
prototype, so remove it now.
Change-Id: Ia43371f6c86632955f67370d3ffc9b2753f797f7
CRs-Fixed: 2379064
Change Ibeb6f99335b4e745335d5968791d9e9187df47f7 ("qcacld-3.0: Remove
legacy scan event handling") removed the implementation of function
wma_scan_event_callback(). However the prototype was left behind, so
remove it now.
Change-Id: I34cd7fa0e9d28c10d73f1000284148eaece042f5
CRs-Fixed: 2379063
Change Ie3783306e0ff5b8a5bbcb6437e982590b03fe040 ("qcacld-3.0: Use
scan for preauth from LIM in roaming") removed all of the roaming
preauth logic from WMA, but it left behind some obsolete protptypes,
so remove these:
- wma_roam_preauth_chan_set()
- wma_roam_preauth_chan_cancel()
- wma_roam_preauth_scan_event_handler()
Change-Id: I9236f641fb80df0e5a6749781adb5af86d8b821b
CRs-Fixed: 2379062
As part of change I5c873b9571228f0d2b4fcd4782267a2cc40fc20a
("qcacld-3.0: Remove the deprecated IOCTL in TDLS") the implementation
of wma_update_fw_tdls_state() was removed. However the prototype was
left behind, so remove it as well.
Change-Id: Ibb08e9f8c8c39eac364b05e72d7c03db306cc8b3
CRs-Fixed: 2379061
Change I542e5afe832619f8c088220cc4456aa7fe4416fd ("qcacld-3.0: Route
the legacy NAN commands through NAN component") removed the usage of
typedef tNanRequest. Since the typedef is obsolete, remove it.
Change-Id: I10e243b4e6998e69027c2f0d5f829cd2a6b27c92
CRs-Fixed: 2379059
The following macros are unused, so remove them :
- wlan_hdd_get_mbo_ie_ptr()
- wlan_hdd_get_p2p_ie_ptr()
- wlan_hdd_get_wfd_ie_ptr()
Change-Id: I37d84802f97881aaa3de1a604f7f29362d868667
CRs-Fixed: 2380103
All WNI configurations will be cleanup based on new cfg framework, so
change Change WNI_CFG_COUNTRY_CODE_LEN to CFG_COUNTRY_CODE_LEN.
Change-Id: I786b62e2c0aff08a89fc3c8a3359e2ffb4044269
CRs-Fixed: 2380488
Currently the driver includes all the DFS channels as part of scan
in the scan list, and thus not exclude the DFS channels in the first
scan for faster scan.
Fix is to check the ini, for first DFS channel scan, and then remove
the DFS channels from the scan list if the ini is enabled.
Change-Id: Iff3361f3c1a577fd8e2b541a0673af431db65a5e
CRs-Fixed: 2378801
New mtrace logging infrastructre is added in the driver,
add mtrace logging for all the messages received from
userspace.
Change-Id: I235f7f8c890b16644d272328124f7a7b7a67f4c5
CRs-Fixed: 2376767
Cleanup the below INI items from HDD.
1.CFG_ENABLE_UL_MIMO_NAME
2.CFG_HE_DYNAMIC_FRAGMENTATION_NAME
3.CFG_ENABLE_UL_OFDMA_NAME
4.CFG_HE_STA_OBSSPD_NAME.
Change-Id: I6321035c14cfd03c1c57fd68b5394c84ed9e1f2c
CRs-Fixed: 2375905
Take VDEV manager SM into consideration, the SME session creation
needs to be combined with VDEV start. So in the monitor mode, need
to postpone SME session creation from net device up to the channel
setting. This change will be applied no matter VDEV manager SM
enable or not.
CRs-Fixed: 2345543
Change-Id: I1b28abd6746ba851608464101a42ac14074e7c41
iwpriv interface is added for configuring Motion detection
feature specific parameters
Added under flag WLAN_FEATURE_MOTION_DETECTION
Change-Id: Ic20c8c43782cf037317f412962fab4a6928eb0b9
CRs-Fixed: 2376722
There is a race condition while flushing the rx cache frames
from MC thread and same time from RX thread. So for rx cache
frames set QDF_NBUF_CB_RX_PEER_CACHED_FRM to avoid using gro
receive and use skb receive with local bh disable.
Change-Id: I5ece8ddf876d27ad3d24b0ba751fe3e3886608e2
CRs-Fixed: 2378342
A bus can have multiple sub interfaces or pipes.
USB bus for example has endpoints grouped into interfaces.
WLAN uses one of these interfaces.
Each interface has its own "struct device". Add support to save
and retrieve this "struct device".
Also pass interface dev to pld_usb_wlan_enable() as CNSS expects
interface device.
Change-Id: I5800bde107157c35efed848a23b95696bd7f793a
CRs-Fixed: 2371440
Fields nlo_in_progress and nlo_match_received in struct
pmo_vdev_priv_obj are unused, so remove them.
Change-Id: I4152e55e407628bbcc32118aa702770a401cfe3b
CRs-Fixed: 2379076
Fix implicit declaration building error when kenel version is
not great than 4.4.
Change-Id: I1155641911de9dce3e758d753183fc1a0e161cc4
CRs-Fixed: 2380299
Update the PMO packet filter APIs to make sure the parameter names
in the prototypes match the ones in the implementations and in the
documentation.
Change-Id: I7fd924d17edb54c690e8ef5b85d4829a4a165edc
CRs-Fixed: 2379075
Based on new cfg framework, defines below five WNI cfg items and one
INI cfg:
- WNI_CFG_APSD_ENABLED
- WNI_CFG_OBSS_DETECTION_OFFLOAD
- WNI_CFG_OBSS_COLOR_COLLISION_OFFLOAD
- WNI_CFG_CURRENT_TX_POWER_LEVEL
- WNI_CFG_LOCAL_POWER_CONSTRAINT
- gTxPowerCap
Change-Id: I5546ea7a4efd142b546ad10a40712d40d2d3ea0d
CRs-Fixed: 2375857
Based on new cfg framework, refactors below five WNI cfg items and one
INI cfg:
- WNI_CFG_APSD_ENABLED
- WNI_CFG_OBSS_DETECTION_OFFLOAD
- WNI_CFG_OBSS_COLOR_COLLISION_OFFLOAD
- WNI_CFG_CURRENT_TX_POWER_LEVEL
- WNI_CFG_LOCAL_POWER_CONSTRAINT
- gTxPowerCap
Change-Id: I5307fe73ad931eaec2e9471ddd36cd6d00061c76
CRs-Fixed: 2375860
Currently for STA mode in open adapter, locally administered
bit is getting reset, there is a possibility that after
resetting this locally administered bit this new MAC matches
to an existing MAC address which may result in multiple interfaces
to be up with same MAC address.
To avoid this issue, add a check for duplicate MAC address after
resetting locally administered bit.
Change-Id: I3ff8091df2c422bd89944ca39849c9961941e8c3
CRs-fixed: 2370349
All WNI configurations will be cleanup based on new cfg framework, so
change Change WNI_VALID_CHANNEL_LIST_LEN to VALID_CHANNEL_LIST_LEN.
Change-Id: I805be88ecdcca90cf3a19d1784bf8f8c261b6ca4
CRs-Fixed: 2379748
Add DP RX Thread Stats support. Stats can be retrieved using iwpriv
dumpStats command.
Remove print from hdd_gro_rx_dp_thread function. This condition is
expected when gro is disabled on low throughput. Print is not needed.
CRs-Fixed: 2346997
Change-Id: I3619844b66e845184a4b8c77763bf9f2d2ea0a38
Scan component will do default value initialization,
remove the config from HDD.
Change-Id: I1b14a135566b40db757b81920c5d9775d56d039f
CRs-Fixed: 2375196
Change to avoid potential out of bound issue
when unsafe channel numbers parameter is invalid.
Change-Id: I0c2cdac844c5fd644fce61d3d69fefcecdb62f19
CRs-Fixed: 2374986
In SSR, after reinit, there is still memory leak
for gp_sap_ctx; As in multi SSR test, memory leak
detection is disabled in recovery mode, it is a
little late to get the issue moment.
Check gp_sap_ctx after stopping all adapter in
hdd_is_interface_down_during_ssr.
Change-Id: I77708d296fb218ca53ac656f844d02f58e23d241
CRs-Fixed: 2377718
In hdd_dns_make_name_query() the parameter string is a user controlled
input. The driver assumes that the input is null terminated string and
accordingly the exit condition of the loop is specified. In case the
user sends input with no null termination then it can lead to possible
OOB scenario.
Add a null termination validation on the string so that any erroneous
input is filtered.
Change-Id: I2abb4875569c508179c4488347f7c9aae0666332
CRs-Fixed: 2342812
Check if vdev is active for the following roam related vdev
commands before sending it to wmi:
1. WMI_ROAM_SCAN_MODE
2. WMI_ROAM_SCAN_PERIOD
3. WMI_ROAM_SCAN_RSSI_CHANGE_THRESHOLD
4. WMI_ROAM_AP_PROFILE
5. WMI_ROAM_CHAN_LIST
6. WMI_ROAM_SCAN_CMD
7. WMI_ROAM_SYNCH_COMPLETE
This will avoid the race condition where the vdev is deleted
and the vdev related commands for the deleted vdev are sent
to firmware before wmi_stop_inprogress is set at wmi.
Change-Id: I8b54bb5663ef517bc58141bc3b96fd9b863fd656
CRs-Fixed: 2344006
Update the max block ack buffer size value to 256 in the addba
response frame to support the reception of A-MPDU with 256 MPDUs.
Change-Id: Iaf699024b969b420b5328d2e91d104bd42adc732
CRs-Fixed: 2375563
