Remove msm_vidc_calculate_output_buffer_count function
calls while g_ctrl event to avoid overwriting of
buffer count to old buffer count value that is set by
client.
Change-Id: I76135a88948ad7e2845c054a48e9f148bf367abb
Signed-off-by: Akshata Sahukar <asahukar@codeaurora.org>
Fixed encoder reference buffer count to use maximum
number of hier players set by client.
Change-Id: I7fe55aff9ee3ac5065e6cab4af37013577e3c4c0
Signed-off-by: Darshana Patil <darshana@codeaurora.org>
Updated maximun allowed mdbf to support one 8K
session and one 4K session at a time.
Change-Id: I64ad3820aaddf5a3f89f97fe34c158b30f1e3675
Signed-off-by: Akshata Sahukar <asahukar@codeaurora.org>
Modified vbvdelay logic with default behavior as
CBR+. Enable legacy CBR if resolution is < 720p.
Client can overwrite default behavior if
resolution is between VGA & 720p.
Change-Id: I9bd5ede782959780e5a5cb56eda0ae5e344e66aa
Signed-off-by: Darshana Patil <darshana@codeaurora.org>
In case of opaque color format the bit depth will be known with
first ETB. Existing logic calculates output buffer size based on
8-bit which won't be sufficient for 10-bit.
So consider 10-bit by default while calculating encoder output
buffer size.
Change-Id: I51eee2fcb0dc137c596babd04659cd1fc087ebd6
Updated corresponding variables of size_vpss_lb
to align height to 16. This is needed to fix internal buffer mismatch
of H264 decoder with firmware which was caused due to height alignment
to 8. Also updated SIZE_VP9D_LB_FE_TOP_DATA, SIZE_VP9D_LB_PE_TOP_DATA
and SIZE_VP9D_LB_VSP_TOP macros width alignment to 16 from 8.
Change-Id: I308a64ec69ac2a63fae9a9481652119f55834cae
Signed-off-by: Akshata Sahukar <asahukar@codeaurora.org>
Do not reset buffer counts while session is running and
modify in case of insufficient event processing.
Change-Id: I5425e54702339e768f3c3a6182fa62dd7a8b484a
Signed-off-by: Maheshwar Ajja <majja@codeaurora.org>
Existing logic to calculate buffer size is based on
the max bitrate supported during a secure session. Even
the peak bitrate calculation is not sufficient to arrive
at the required frame size.
Going back to earlier logic based on macroblocks per frame.
CRs-Fixed: 2467242
Change-Id: I0fe1768036f19ad2f1d08222e3ed239be7a2e27c
Signed-off-by: Vikash Garodia <vgarodia@codeaurora.org>
- Consider thumbnail mode while calculating buffer counts
- decide batching in reconfiguration event so that driver
returns proper min buffer count when client query for it
Change-Id: I4d5373e78d43592caf0cef59f2f8801d20014efd
Signed-off-by: Maheshwar Ajja <majja@codeaurora.org>
As per system requirements this additional bw is needed
for decode session.
Change-Id: Ia435aadcf78e4e2fd7b01ed00633fa2f38729bc6
Signed-off-by: Chinmay Sawarkar <chinmays@codeaurora.org>
FW provides UBWC_CR_STATS_INFO with every EBD which can be used
to accurately calculate BW requirements. Also renamed reconbufs
to refbufs, which is common to encode and decode.
CRs-Fixed: 2467542
Change-Id: I29afdcd466bd61f455507d30ab7ca951d0e9911c
Signed-off-by: Chinmay Sawarkar <chinmays@codeaurora.org>
CF and CR cannot be zero. Initialization of Min/Max values
keeps the values within limits, when FW does not provide them.
Also, do not modify CF, CR value based on DCVS. Always use
worst case values.
CRs-Fixed: 2467542
Change-Id: I91ed83cb5c9e1a8cda5775c491d99b97c4043a12
Signed-off-by: Chinmay Sawarkar <chinmays@codeaurora.org>
Add sanity checks before and after clocks and regulator
operations to get more information if these operations
not functional as expected.
Change-Id: Ib4985113200ed065e6acf6cb7ae406b88cc7f432
Signed-off-by: Maheshwar Ajja <majja@codeaurora.org>
Set default profile type to avoid error when client
has not set any profile type.
Change-Id: I89b81f5167f65685e47073b5e73d3bd7c4fe81d6
Signed-off-by: Akshata Sahukar <asahukar@codeaurora.org>
driver returns min buffer count to client which includes
extra buffers count which is required for batching even
though batching may be disabled in start_streaming() later.
So decide batching in set format (configuration) to avoid
adding extra buffers count to reduce memory usage in
non-batching cases.
Change-Id: I147f7aaf928074a23c9dcda2dbf69a744cec382d
Signed-off-by: Maheshwar Ajja <majja@codeaurora.org>
Add new VIDC_BUS log mask for bus parameters
related logs.
Change-Id: If933c8c88ec2e0ccb283606da7f46a3c3c49756a
Signed-off-by: Shi Zhongbo <zhongbos@codeaurora.org>
pkt->msg_size can be corrupted, that leads to OOB access. So added
additional conditional check to avoid OOB access in debug queue
packet handling.
Change-Id: I360812c40369ecef2dd99464d400661bc785074b
Signed-off-by: Govindaraj Rajagopal <grajagop@codeaurora.org>
Add support to disable both auto blur and
external blur.
Change-Id: I5200f738ffa5849a3e840f90f0da66c38607ceae
Signed-off-by: Qiwei Liu <qiweil@codeaurora.org>
Use the existing batch enable variable instead of extra
variable decode_batching.
Change-Id: Ic7875caf2b0d2c47d77b0c0c0ce9b5792920cafc
Signed-off-by: Maheshwar Ajja <majja@codeaurora.org>
Decode session needs UBWC CR statistics for BW calculations.
Hence need to enable this exetradata by default.
CRs-Fixed: 2467542
Change-Id: I3955a0b09cf82f97478c31704be6b16f297b011b
Signed-off-by: Chinmay Sawarkar <chinmays@codeaurora.org>
during load resource firmware will check input buffer type
against requested buffer type. If there a mismatch it will
throw an error. So cleared non-requested buffer from the
scratch buffer list
Change-Id: Ifabf532982a393d4fc356ff3cad0ca3fd715fce0
Signed-off-by: Govindaraj Rajagopal <grajagop@codeaurora.org>
Existing code updates the device clock before cx ipeak logic.
As a result, the cx ipeak takes a decision based on updated
clock rather than the clock at which the device was running.
With the change, device clock is updated after the cx ipeak
is decided.
Change-Id: Icfde29176f8adb3a12c68a611f47b83ca7a8e4a9
Signed-off-by: Vikash Garodia <vgarodia@codeaurora.org>
Signed-off-by: Manikanta Kanamarlapudi <kmanikan@codeaurora.org>
Perf mode can be either predefined or can be decided dynamically.
It is configured differently for different video hardware versions.
Perf mode is now updated with below
1. Remove multicore calculation as it is not applicable for single core
hardware.
2. Rate control type CQ is considered during load calculation
3. If the clocks are available, keep higher perf mode, unless restricted
by the hardware specification.
CRs-Fixed: 2462264
Change-Id: I9328e07ea3d1667b15a431c624112f1e8f8c92e0
Signed-off-by: Vikash Garodia <vgarodia@codeaurora.org>
operating rate setting to firmware is not required for decoder.
Change-Id: I271a42822f4a00e95d875400e5ad273697c94ab1
Signed-off-by: Govindaraj Rajagopal <grajagop@codeaurora.org>
Video port resolution can be updated during reconfig event itself.
With this, reconfig height and width was removed. Also relevant
code cleanup was made accordingly.
Change-Id: I4fb38563b4c747eb356f28b7df7e99bd397ff8d1
Signed-off-by: Vikash Garodia <vgarodia@codeaurora.org>
