fix build bug:
drivers/virtio/virtio_balloon.c: In function 'fill_balloon':
drivers/virtio/virtio_balloon.c:98: error: implicit declaration of function 'msleep'
Acked-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Pavel Emelyanov reported that his networking card did not work
and bisected it down to:
"
The commit
093af8d7f0
x86_32: trim memory by updating e820
broke my e1000 card: on loading driver says that
e1000: probe of 0000:04:03.0 failed with error -5
and the interface doesn't appear.
"
on a 32-bit kernel, base will overflow when try to do PAGE_SHIFT,
and highest_addr will always less 4G.
So use pfn instead of address to avoid the overflow when more than
4g RAM is installed on a 32-bit kernel.
Many thanks to Pavel Emelyanov for reporting and testing it.
Bisected-by: Pavel Emelyanov <xemul@openvz.org>
Signed-off-by: Yinghai Lu <yinghai.lu@sun.com>
Tested-by: Pavel Emelyanov <xemul@openvz.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
delay the CPA self-test so that any impact (corruption) of
user-space pagetables can be triggered. Repeat the test
every 30 seconds.
this would have prevented the bug fixed by 8cb2a7c1e9,
at its source.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
The .rodata section really should just be read only; the config option
is there to make breaking up the 2Mb page an option (so people whos machines
give more performance for the 2Mb case can opt to do so).
But when the page gets split anyway, this is no longer an issue, so
clean up the code and remove the ifdefs
Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
The .rodata section shouldn't just be read-only,
but also non-executable. This is free since we've broken
up the 2MB page already anyway.
also update test_nx to check for this.
Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
This change broke recovery of exceptions in iret:
commit 72fe485854
Author: Glauber de Oliveira Costa <gcosta@redhat.com>
x86: replace privileged instructions with paravirt macros
The ENTRY(native_iret) macro adds alignment padding before the iretq
instruction, so "iret_label" no longer points exactly at the instruction.
It was sloppy to leave the old "iret_label" label behind when replacing
its nearby use. Removing it would have revealed the other use of the
label later in the file, and upon noticing that use, anyone exercising
the minimum of attention to detail expected of anyone touching this
subtle code would realize it needed to change as well.
Signed-off-by: Roland McGrath <roland@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
arch/x86/kernel/cpu/cpufreq/powernow-k8.c:830:7: warning: symbol 'hi' shadows an earlier one
arch/x86/kernel/cpu/cpufreq/powernow-k8.c:824:6: originally declared here
arch/x86/kernel/cpu/cpufreq/powernow-k8.c:830:15: warning: symbol 'lo' shadows an earlier one
arch/x86/kernel/cpu/cpufreq/powernow-k8.c:824:14: originally declared here
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
This was being used to ensure the proper alignment of the FXSAVE/FXRSTOR data.
This would create a sparse error in the _correct_ cases, hiding further
warnings. Use BUILD_BUG_ON instead.
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
In my revamp of the x86 ptrace code for setting register values,
I accidentally omitted a check that was there in the old code.
Allowing %cs to be 0 causes a bad crash in recovery from iret failure.
This patch fixes that regression against 2.6.24, and adds a comment
that should help prevent this subtlety from being overlooked again.
Signed-off-by: Roland McGrath <roland@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
based on similar patch from: Pavel Machek <pavel@ucw.cz>
Introduce CONFIG_COMPAT_BRK. If disabled then the kernel is free
(but not obliged to) randomize the brk area.
Heap randomization breaks ancient binaries, so we keep COMPAT_BRK
enabled by default.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
There is a check in sys_brk(), that tries to make sure that we do not
underflow the area that is dedicated to brk heap.
The check is however wrong, as it assumes that brk area starts immediately
after the end of the code (+bss), which is wrong for example in
environments with randomized brk start. The proper way is to check whether
the address is not below the start_brk address.
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
In very rare cases, on certain CPUs, we could end up in the spurious
fault handler and ignore a large pud/pmd mapping. The resulting pte
pointer points into the mapped physical space and dereferencing it
will fault recursively.
Make the code aware of large mappings and do the permission check
on the pmd/pud entry, when a large pud/pmd mapping is detected.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Unify the x86-64 behavior for 32-bit processes that set
bogus %cs/%ss values (the only ones that can fault in iret)
match what the native i386 behavior is. (do not kill the task
via do_exit but generate a SIGSEGV signal)
[ tglx@linutronix.de: build fix ]
Signed-off-by: Roland McGrath <roland@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
... thus decreasing checkpatch.pl errors to 0.
Bart:
- remove needless function prototypes while at it
- remove needless parentheses while at it
- add missing KERN_ level to ide_tape_probe()
- other minor fixups
Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
This function was being used only at one place so fold it in there.
Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Shorten some member names not too aggressively since this driver might be gone
anyway soon.
Bart:
- minor fixes
Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
- last_frame_position: only being written to once
- firmware_revision, product_id, vendor_id: used once, remove from struct
idetape_tape_t and deal with them locally
- firmware_revision_num: only written to once
- tape_still_time_begin: completely unused
- tape_still_time: never written to; remove corresponding code chunk
- uncontrolled_last_pipeline_head: only once written to
- blocks_in_buffer: only written to
Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
... by adding a new typedef function pointer idetape_io_buf in order to call
the proper buffer i/o handler depending on the data direction.
Bart:
- move idetape_io_buf before idetape_pc_intr() comment
Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
tape->speed_control is set to 1 in idetape_setup(), but, in calculate_speeds()
its value is tested for being 0, 1, or 2. Remove the if-branches where
tape->speed_control != 1 since they are never executed. Also, rename
calculate_speeds() by adding driver's prefix as is with the other function
names.
Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
There should be no functional changes resulting from this patch.
Bart:
- remove needless "!!"
Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Teach the debug logging macro to differentiate between log levels based on the
type of debug level enabled specifically instead of a threshold-based one.
Thus, convert tape->debug_level to a bitmask that is written to over /proc.
Also,
- cleanup and simplify the debug macro thus removing a lot of code lines,
- get rid of unused debug levels,
- adjust the loglevel at several places where it was simply missing (e.g.
idetape_chrdev_open())
- move the tape ptr initialization up in idetape_chrdev_open() so that we can
use it in the debug_log macro earlier in the function.
Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
ide-cris.c:
* Add cris_setup_ports() helper and use it instead of ide_setup_ports()
(fixes random value being set in ->io_ports[IDE_IRQ_OFFSET]).
buddha.c:
* Add buddha_setup_ports() helper and use it instead of ide_setup_ports().
falconide.c:
* Add falconide_setup_ports() helper and use it instead of ide_setup_ports(),
also fix return value of falconide_init() while at it.
gayle.c:
* Add gayle_setup_ports() helper and use it instead of ide_setup_ports().
macide.c:
* Add macide_setup_ports() helper and use it instead of ide_setup_ports()
(fixes incorrect value being set in ->io_ports[IDE_IRQ_OFFSET]).
q40ide.c:
* Fix q40_ide_setup_ports() comments.
ide.c:
* Remove no longer needed ide_setup_ports().
Cc: Mikael Starvik <starvik@axis.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
* Replace incorrect CONFIG_BLK_DEV_IDE #ifdef in
check_media_bay() by CONFIG_MAC_FLOPPY one.
* Replace incorrect CONFIG_BLK_DEV_IDE #ifdef-s by
CONFIG_BLK_DEV_IDE_PMAC ones.
* check_media_bay() is used only by drivers/block/swim3.c
so make this function available only if CONFIG_MAC_FLOPPY
is defined.
* check_media_bay_by_base() and media_bay_set_ide_infos()
are used only by drivers/ide/ppc/pmac.c so so make these
functions available only if CONFIG_MAC_FLOPPY is defined.
v2:
* Remove ifdefs from function prototypes. (Andrew Morton)
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
with module_param macro, the __setup code can be killed now:
const __setup("all-generic-ide", ide_generic_all_on);
and the module name "generic.ko" is not descriptive to its functionality,
can be changed in Makefile, the "ide-pci-generic.ko" is better.
the ide-pci-generic.all-generic-ide parameter also documented
in Documentation/kernel-parameters.txt
Signed-off-by: Denis Cheng <crquan@gmail.com>
Cc: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
drivers/ide/legacy/hd.c: In function 'hd_request':
drivers/ide/legacy/hd.c:424: warning: 'stat' may be used uninitialized in this function
gcc is being stupid.
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
drivers/ide/ide-acpi.c: In function 'ide_acpi_init':
drivers/ide/ide-acpi.c:175: warning: 'dev_handle' may be used uninitialized in this function
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
This is Palmchip BK3710 IDE controller support.
The IDE controller logic supports PIO, MultiWord-DMA and Ultra-DMA modes.
Supports interface to Compact Flash (CF) configured in True-IDE mode.
Bart:
- remove dead code
- fix ide_hwif_setup_dma() build problem
Signed-off-by: Anton Salnikov <asalnikov@ru.mvista.com>
Reviewed-by: Alan Cox <alan@lxorguk.ukuu.org.uk>
Reviewed-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
On Tuesday 05 February 2008, Linus Torvalds wrote:
>
> On Sat, 2 Feb 2008, Bartlomiej Zolnierkiewicz wrote:
> >
> > * next part of IDE probing code re-organization saga
> > (that would be me)
>
> This seems to cause very irritating and bogus messages for me:
>
> Probing IDE interface ide0...
> Probing IDE interface ide1...
> ide2: I/O resource 0x0-0x7 not free.
> ide2: ports already in use, skipping probe
> ide3: I/O resource 0x0-0x7 not free.
> ide3: ports already in use, skipping probe
> ide4: I/O resource 0x0-0x7 not free.
> ide4: ports already in use, skipping probe
> ide5: I/O resource 0x0-0x7 not free.
> ide5: ports already in use, skipping probe
> ide6: I/O resource 0x0-0x7 not free.
> ide6: ports already in use, skipping probe
> ide7: I/O resource 0x0-0x7 not free.
> ide7: ports already in use, skipping probe
> ide8: I/O resource 0x0-0x7 not free.
> ide8: ports already in use, skipping probe
> ide9: I/O resource 0x0-0x7 not free.
> ide9: ports already in use, skipping probe
>
> and that's just totally bogus. It shouldn't even request that region,
> since it's not been allocated!
The commit 139ddfcab5 ("ide: move handling of
I/O resources out of ide_probe_port()") changed the ordering of hwif->noprobe
check vs ide_hwif_request_regions() call (so that we now reserve I/O regions
before checking for hwif->noprobe). However ide-generic host driver depended
on hwif->noprobe to be set for skipping probing of empty ide_hwifs[] slots.
Fix it by passing only indexes of non-empty slots to ide_device_add_all()
from ide_generic_init().
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
