In case STA is in connected state, and the PMF SAP receive Assoc
request from the STA, the assoc request is silently dropped.
Instead the SAP should send assoc resp with comeback time and
start SA query.
Fix it by not dropping the duplicate assoc request frame for PMF
capable STA.
Change-Id: I812fb40541c93e7cac470b9154217844eac8a86d
CRs-Fixed: 2017250
tpSirMacFrameCtl points to tx_frame however after deletion of
tx_packet, tpSirMacFrameCtl pointer is not updated which is
causing invalid memory access.
Add changes to update tpSirMacFrameCtl once tx_frame got deleted.
Change-Id: Ifb10899f0a518a935641af88a7ef45b0a6fd293c
CRs-Fixed: 1103839
As per the current implementation wmmAcTspecValid is reset during roaming
and set after establishing TSpec but currently wmmAcTspecValid is not
considered before classifying the data frames based on AC and UP.
Due to above issue after roaming we are still sending packets with UP
for which tspec session is not established.
Fix above issue by checking wmmAcTspecValid for AC before
classifying the frame.
Change-Id: I37039fa568696f0861b02d094c3a513dbc2b9967
CRs-Fixed: 915555
On channel change of SAP to 5G, SAP is populating 2.4G basic
rates in 5G beacon.
Set number of supported and extended rates to zero for populating
rates based on network type. CSR layer will pick default rates if
hostapd rates are passed as zero
Change-Id: Ia393f7b6067f31dc8f792cda2bd74c441c2112e6
CRs-Fixed: 1105867
The 64-bit division in 32-bit architecture call 64-bit-by-64-bit
division routines "__aeabi_uldivmod", which is not defined for
the 32-bit architecture.
Use do_div asm-generic library api for division operation to avoid
the arch specific division "undefined symbol: __aeabi_uldivmod"
linking error during wlan driver load on 32-bit target.
CRs-Fixed: 2014971
Change-Id: I43253d1eb9f726ac0a96d21f4511a5a282c7bb2d
As part of I707054c44a882f6dd4a4a9df2b6821b93b724f7a, completion
of wlan_start_comp variable is removed at hdd_wlan_startup,
that leads to timeout crash waiting for driver registration.
Add complete wlan_start_comp at hdd_wlan_startup.
Change-Id: I2e80465cd1ec66b9330b8f6e9b11fd14076035eb
CRs-Fixed: 2017668
Disable Qpower when UAPSD is enabled or if the max ps poll is
configured by user.
Change-Id: If9c747406d65a6f89fa123592c3f9d79724b8ae0
CRs-Fixed: 2017432
Remove OEM DATA REQ serialization enum, since wifi positioning
component does not use command serialization.
Change-Id: I16cb21a9ea6b4610dbde4ab51a6cec7542a7e0c0
CRs-Fixed: 2003488
Add an ini item for configuring the keepalive method used by station
interfaces.
Change-Id: Id44773f5ae7f7ad1ad9441592512ab3e2ce3a076
CRs-Fixed: 2016799
In case of auto channel selction failure, clean exit does not happens
which results as scan completion event timeout in start bss API.
Add appropriate API call with channel selection failure
case.
Change-Id: I66a81f586234adb5a0edc4c85cfbaa221424217f
CRs-Fixed: 2006960
Inform the bss using the new API cfg80211_inform_bss_frame_data() which
also has the ability to inform the timestamp when the frame has
been received.
If the support is not present in the kernel fallback to the legacy
inform bss.
Change-Id: Iaa512248a5e56d77cff39da562e0c9ee4eaeeefd
CRs-Fixed: 1082423
Check the FW capabilities to enable VHT160MHz support.
Disable 160MHz by default in the configuration.
Change-Id: Ia6985d9f7c55a070dbb47faf95cd409201037e0c
CRs-Fixed: 2004245
Currently, enable/disable channel avoidance event based on INI is done
in hdd_wlan_startup. In power save scenarios, where WMI configuration
needs to be sent again to FW, channel avoidance event setting is not
sent.
Move the channel avoidance setting to hdd_features_init so that this
config is set properly to FW in power save cases as well.
Change-Id: I707054c44a882f6dd4a4a9df2b6821b93b724f7a
CRs-Fixed: 2009299
The Preferred Network Offload (PNO) wakelock protects Supplicant while
it configures the new scan results. The wakelock timeout should be
optimized as much as possible on production builds, as it is never
released by the driver. For additional power savings, reduce the timeout
of this wakelock in production builds compared to debug builds.
Change-Id: Iaccf56e00e933d3a216212ef219f31d28d022ea5
CRs-Fixed: 2016286
Increment the pno_complete stats counter from the Network Listen
Offload (NLO) complete callback, in order to keep pno_match and
pno_complete stats synchronized.
Change-Id: I7ac7edeb3a10498549dceee1874c99ea3095f28e
CRs-Fixed: 2016236
wlan-cld3.driver.lnx.1.1-dev to wlan-cld3.driver.lnx.2.0-dev propagation
As a part of add virtual interface API kernel takes the rtnl lock,
if start modules fails then it will take the rtnl lock again while
closing the adapter which causes the UI freeze issue.
To resolve this issue, call close adapter API with indication that
lock is already taken.
Change-Id: Ic186eba794600b189021d7455a5811972280ee84
CRs-Fixed: 2013661
Presently if there is an error during the add interface, closing of adapter
and the stopping of the modules is not handled.
So, close adapter during the failure adding the new virtual interface
and if there are no interfaces running start the interface change
timer callback.
Change-Id: I807bc5b295a7faf369e8a9f1e0958eac869f189f
CRs-Fixed: 1097312
qcacld-2.0 to qcacld-3.0 propagation
Add below four keys to allow user to tune WRR TX scheduler params.
Each key is mapping to one AC defined in data path module through
OL_TX_SCHED_WRR_ADV_CAT_CFG_SPEC.
gEnableTxSchedWrrBE
gEnableTxSchedWrrBK
gEnableTxSchedWrrVI
gEnableTxSchedWrrVO
Change-Id: I5c34b604297d83673ea065243cc58c3f2180ff3e
CRs-Fixed: 1020141
HDD to send user configurations received from ini to object manager.
Common components to refer to them from psoc object using public APIs.
Change-Id: I85045ccc291e280132be4164b13d07dee4538951
CRs-Fixed: 2003447
Propagation from cld3.0-1.1 to cld3.0-2.0
Fix the log level from Error to Info since it is not
an error and also move the message out of the if block
to give more meaningful information
Change-Id: Ia25bcc5b19d5b05666038b75b9a626e69b8de68c
CRs-Fixed: 2014221
