Enable the build configuration for dp hang event to
enable the datapath hang event logging feature.
Change-Id: I8044f977e417a311a17e446cc6b71211d217ae4b
CRs-Fixed:
Whenever a recovery is triggered in the hdd layer update the
various vdev data for hang event:
1) Vdev id
2) vdev opmode
3) vdev state and substate
if the reason for recovery is max scan failures update the last
scan reject, reason and the vdev id on which scan is rejected.
Change-Id: I84928e56bac1fe58e7eada0a0574b2f23124ae65
CRs-Fixed: 2651694
htc hang event configuration has been added, enable
the build configration for the feature.
Change-Id: I5441f95288db46ca58ef44f4c825b9f4f7cf59ac
CRs-Fixed: 2651750
wmi hang event configuration has been added, enable
the build configration for the feature.
Change-Id: I8c7034d07f369f79191a2496e9000f83eecdba6e
CRs-Fixed: 2651741
In qdf new hang event notifier chain has been added, enable
the build configration for the feature.
Change-Id: I98e2701499133d208af863b401fc47fafec35226
CRs-Fixed: 2648449
In qdf new os specicfic notifier chain has been added, enable
the build configration for the feature.
Change-Id: Ic08b3ebc3b173839496428a27d0eb4d7a1633cb6
CRs-Fixed: 2648245
Per HW team's analysis, we find a TXDMA HW limitation:
ADDR0&0x1FFFFFFF8 should not equal ADDR1&0x1FFFFFFF8.
Otherwise, TXDMA will run into exception, which cause TX fail.
ADDR0: the address of last words in previous buffer;
ADDR1: the address of first words in next buffer;
We hit this limitation in NAT forward TSO jumbo case whose buffer
address of two fragments like below:
tso_frags = (
(length = 0x42, vaddr = 0xFFFFFFD0F5FA2F82, paddr = 0x1F5FA2F82),
(length = 0x05A8, vaddr = 0xFFFFFFD0F5FA2FC4, paddr = 0x1F5FA2FC4)
In this case, ADDR0 = 0x1F5FA2F82 + 0x42 -2 = 0x1F5FA2FC2,
ADDR1 = 0x1F5FA2FC4, then
ADDR0&0x1FFFFFFF8 = ADDR1&0x1FFFFFFF8.
To avoid this, shift server bytes for ADDR0.
Change-Id: If9334a6861a03432eb70356df41a11ad971159e3
CRs-Fixed: 2641066
These debugfs files are to replace wext cmd setUnitTestCmd
/unit_test/wlan_suspend/wlan_resume.
unit_test_host:
/sys/kernel/debug/wlan_xx/unit_test_host
wlan_xx is driver name
unit_test_target:
/sys/kernel/debug/wlan_xx/unit_test_target
wlan_xx is adapter name
wlan_suspend:
/sys/kernel/debug/wlan_xx/wlan_suspend
wlan_xx is adapter name
wlan_resume:
/sys/kernel/debug/wlan_xx/wlan_resume
wlan_xx is adapter name
Change-Id: I1ddf44b47a3f0d2e11ff74022dc1a26888da974c
CRs-Fixed: 2631424
11K test bed sends beacon report request for channel 48 with
invalid reg class 0 to DUT. So, driver gets chan_freq 0 by API
wlan_reg_chan_opclass_to_freq because of reg class 0.
To get correct channel freq for beacon report request, use new
API wlan_reg_country_chan_opclass_to_freq to
get freq from country operating class table firstly by (opclass,
channel number) pair. When the lookup is failed, the API will
try to look up by chan number only.
Change-Id: I5b56804c20d6fade17b2acaa0f7c261feebd6370
CRs-Fixed: 2603989
Currently no stats were printed related to ARP and DNS frames at STA
after initial association or after roaming complete.
To print these logs, add INI configuration and a periodic timer to
print ARP and DNS stats after initial association or after roaming
complete. This is an optional feature controlled by
'WLAN_FEATURE_PERIODIC_STA_STATS' flag.
Change-Id: I373632cc35584728c5b556bb28eda1077d51fd9b
CRs-Fixed: 2619383
1) Add optional code compilation for Dynamic ACS(DCS) module.
2) Add Kbuild option(CONFIG_DCS) to control whether DCS code
should be compiled.
Change-Id: Ia594db21fef43a8ef6e90afb4191f50ba42f74b7
CRs-Fixed: 2604529
Add the sysfs entry ftm_time_sync in STA mode to show the offset
derived for the STA(slave) with respect to connected AP(master).
Change-Id: I05b16ccdb983c53fb86eeb14ba98bd3cc9a2dce6
CRs-Fixed: 2621152
Enable the register write failure history for
reo remap registers in lithium based targets.
Change-Id: Iaed3ea33e8ae3ab012b2403c50cb785f81497c04
CRs-Fixed: 2626325
Introduce a compile time flag SAE_SINGLE_PMK and new INI
"sae_same_pmk_feature_enabled" to enable/disable SAE
Roaming with same PMK/PMKID feature.
Change-Id: Ifca8ec8bcf6e9a2f1d8409b35390bfee0033bd30
CRs-Fixed: 2616025
QCN7605 has 2 set of shadow registers, WCSS block and PCIe block.
As PCIe shadow register are at power domain boundary, enabling
PCIe shadow register for QCN7605.
Also PCIe shadow register falls below 512KB, no need to use register
windowing which is required to get it access from IPA FW.
Change-Id: Ic0bbc2de4c3e32c4fb6453d273f0f29d19f3537c
CRs-Fixed: 2623851
Process management Tx and Rx frames for packet capture mode
and post frames to the mon thread.
Change-Id: I14c0a1cf8a8aa4d4a4e16ad6200715b875611c81
CRs-Fixed: 2619317
Send vdev param command to FW for STA vdev to set the packet
capture mode. Send the command only if packet capture support
is enabled.
Change-Id: Ifed2431882b1f7d2869771e812daa5bcd5dc17e9
CRs-Fixed: 2619314
Currently, there is some issue about IPA GSI update
copy engien 5 write index register failure, so add
this flag for Genoa IPA workaround, once the real fix
is ready, will revert this flag.
Change-Id: I17313ea281bad03f471222b54802fa9628893e1f
Add the function to parse the FTM timesync start/stop and offset
events received from target and populate them in ftm timsync
priv vdev structure.
Change-Id: Ibdcf97bb0a04fc6490c6bd2c26701036df92c5d4
CRs-Fixed: 2618646
This feature flag is used to set the page size to 4KB
for MCL and to use the max_alloc_size config ini param
for page size in the WIN specific code.
The page size is used to allocate link descriptor pages
for the WBM idle link ring instead of the desc bank
contiguous memory allocations.
Change-Id: I9ff575efc475473654cb4b66a95285c779599b24
CRs-Fixed: 2612385
Add flag IPA_WDI2_GSI to the Kbuild that can be used to
configure whether need to get "is_over_gsi" from IPA driver
for Genoa IPA over GSI case.
Change-Id: Ib6de50d5b3ffb581d85deff089ae77a1a39998ca
As part of the vendor extended stats, add API to
request Rx hardware stats for a given vdev id.
Change-Id: I46d73de21724c4c5ebf4a78075b7b2c1d02fe92a
CRs-Fixed: 2605729
Add a new qca sub command QCA_NL80211_VENDOR_SUBCMD_BTC_CHAIN_MODE.
This command is used to set BT coex chain mode via
WMI_COEX_CONFIG_BTCOEX_SEPARATE_CHAIN_MODE, it has 2 args:
arg1: BTC chain mode, including shared (0, default) and separated(1).
arg2: force restart flag. true means doing vdev restart after applying
the new configurations; while false or NOT set means not.
CRs-Fixed: 2534768
Change-Id: I869096784e5089a6c90e94e76234cd13c9b1a13a
Add Kbuild changes to include files of coex component.
Introduce a new build config 'CONFIG_FEATURE_COEX'.
CRs-Fixed: 2534768
Change-Id: I3c97dda6c446c7474d4d7babf2dc88fe6e4dd0ef
Check the HW TLVs to identify if the flow is already programmed.
If flow doesnot exist make an entry to SW and HW flow table.
Invalidate FSE cache to make fse read updated FT entry
Change-Id: I6acc539c5c7994e438ebb2af9cb3bb5ecbf6e120
CRs-Fixed: 2600268
Add feature flag DROP_RXDMA_DECRYPT_ERR to not process or drop
frames coming with error code as rxdma decrypt error.
Change-Id: I9ca8905c6487051f57a5203e5fe1a530a74a951a
CRs-Fixed: 2617442
This patchset adds the FTM TIME SYNC component in
target_if to register the ftm time sync wmi events/cmds.
Change-Id: I4ea14266a912c9d261a67809556774860b5ddab1
CRs-Fixed: 2617055
Add support to customize DSCP-to-UP map table and send the
customized map values to FW to update its corresponding
map table.
Change-Id: Ibe9704a90468c898dd2e60fdf83a271152f654ce
CRs-Fixed: 2616247
Add dp_mon_filter.c to Kbuild to compile
the file to support monitor mode filter
setting.
Change-Id: I1bbfd82bd5a9a6fdf85208516d0d35cab9cd3249
CRs-Fixed: 2610965
As part of new requirement WLAN subsystem needs to perform thermal
mitigation action as per the thermal state of the device. The
wifi hal sends vendor command QCA_NL80211_VENDOR_SUBCMD_THERMAL_CMD
with the thermal level parameter and wlan host performs the required
appropriate action. wlan host driver maps the thermal level to
corresponding duty cycle off percent value and duty cycle value,
send WMI_THERM_THROT_SET_CONF_CMDID cmd to FW.
Make changes to perform vendor command handling, mapping thermal level
to duty cycle value and communicating the thermal information to FW.
change-ID: I77175048c817ab755cdb838018e414ef3ee0b112
CRs-Fixed: 2610395
Pass soc objmgr from hdd context to hif context
to retrieve INI parameters to be used in hif
layer.
Change-Id: I0ad4573fecba0fc78968145394683057d09da312
CRs-Fixed: 2598759
If the flag is enabled drop the packet if msdu_done bit
is not set while processing rxdma err frames. This is
not expected while reaping WBM RX release ring.
Change-Id: Ic8a09ba5a6952510e82a209d6ef609343a9bc09a
CRs-Fixed: 2608661
Compile pktlog file based on legacy or future
chipsets as this would give us significant
code memory savings.
Change-Id: I394a9672fd84db691eef873cfd20eb1724e26073
CRs-Fixed: 2585626
