This is a propagation of qcacld-2.0 commit 98821c7dcf49d ("qcacld-2.0:
Add CONFIG_MULTI_IF_LOG to support multi if log"). Add CONFIG_MULTI_IF_LOG
to support multi if log by assigning the specific netlink protocol
when dual wlan cards are loaded.
Change-Id: I3ea9574899c23a8d2ebbdea5b958cc3ad7947fe5
CRs-Fixed: 2525483
The bssId in struct sDphHashNode represent vdev_id and same can
be used from pe session which already has this info so remove
bssId param.
Change-Id: I47a7f27e95bfaa9ecd617cb531895601a27dfbf5
CRs-Fixed: 2530965
Add Feature Flag HIF_RECORD_RX_PADDR for Helium only to record
paddr for IOVA and virtual address in CE descriptor history.
Change-Id: I926fbd0fa74cc7e1488a5c7cac007a6432d50d2e
CRs-Fixed: 2528295
6 GHZ has introduced new set of frequency based APIs. Also there is
conditional usage of 6 GHZ band. Add configuration items for these.
Change-Id: I22703989ec7e6711af640f1f9d0afded46026b8a
CRs-Fixed: 2513098
The pktlog will fail with ROME module due to the change IDs:
I24776caa3b78ec38d94421f243ec72d81ee3102d
Ifb70ac0993f2402201f88758845f730cf677b1a0
Define new macro PKTLOG_LEGACY for HELIUM/ROME to avoid the ROME PKTLOG
failure.
Change-Id: Ibaa20b7af208a261e0fd8682de45ad8eb4a69212
CRs-Fixed: 2520696
Add Feature Flag HIF_RECORD_RX_PADDR for Helium to record
paddr in CE descriptor history.
Change-Id: I5a6af11fecc00a26d1a334a983290a00be34895c
CRs-Fixed: 2525667
The member of type_specific_data is not valid for ROME module. Add macro
protection for type_specific_data in the ath_pktlog_hdr to avoid offset
error when getting the msdu id info during processing pktlog TX info.
Change-Id: Icb8b95cef9a32732116522e4fc3b39067ff36037
CRs-Fixed: 2522277
Introduce a new Kbuild option 'WLAN_CFG_OVERRIDE' to override
wlan configurations.
Value of this option is a list, which includes the config items
those need to override, its pattern is as below:
WLAN_CFG_OVERRIDE="WLAN_CFG_1=n WLAN_CFG_2=y WLAN_CFG_3=n"
For LA build, it makes use of this Kbuild option, and introduces
new android build options for different products:
WLAN_CFG_OVERRIDE_wlan: for single wlan driver case.
WLAN_CFG_OVERRIDE_<chip>: for multiple wlan drivers case, for
example WLAN_CFG_OVERRIDE_qca6390 and WLAN_CFG_OVERRIDE_qca6174.
Change-Id: I8e062c62d36e076a79032a47aa04501d4543a9c8
CRs-Fixed: 2515905
In Genoa SDIO ADMA implementation Host sends packets to FW in
multiples of SDIO Block size.
If the packet/bundle is not block aligned Host adds padding at the
end of Packet/Bundle.
If the TX packet plus padding exceeds one FW TX Buffer, Padding data
will occupy the next FW TX buffer. Same applies for bundle TX packet.
For above scenario, HTC_FLAGS_PADDING_CHECK of HTC header Flags is used
to notify the FW that - Padding data follows the currentHTC packet
Since the padding data will take one extra FW Tx Buffer, host need to
handle the extra Tx credit being used by the padding data/buffer
CRs-Fixed: 2516619
Change-Id: Ie2d2292fabb30e1a13eebe4d11b57f452e42afa8
Use QCS40X instead of QCS405 in config files. Kernel defconfig files for
QCS405 and QCS403 has been separated recently, and the arch has been
changed between these two chips. But all QCS related features and changes
in cld should all be included, so use CONFIG_ARCH_QCS40X to replace
CONFIG_ARCH_QCS405.
Change-Id: I6f0837bb3d3f1530aea5b2d4912741beb8c313bd
CRs-Fixed: 2519267
Add configuration for gpio pin used to send strobe to wlan hw.
The host driver will latch the current time and toggle the gpio
to generate a strobe to wlan hw.
The tsf will be latched on detecting the strobe and it will be
made available in a register for sw access.
The wlan fw will read this tsf and report it to driver using tsf event.
Change-Id: I4365d97d22836ddbbd2bf9913d4f723e5a870369
CRs-Fixed: 2495152
Avoid compiling ol_rx_reorder.c and ol_rx_reorder_timeout.c
for low latency and only compile for high latency
data path.
Change-Id: I1f3819fa093766abba87e5dc6dc44e6d2188740b
CRs-Fixed: 2506005
Remove "CMN_VDEV_MGR_TGT_IF_ENABLE" from Kbuild as target_if common
code is used for vdev operations and legacy code is removed.
Change-Id: I15fb2311aa1b6eeec506d9a6bdc720abaf93244e
CRs-Fixed: 2507456
Enable Motion Detection Feature for Genoa USB interface
using config flag CONFIG_FEATURE_MOTION_DETECTION
Change-Id: If345705619f231d195d79e50a9bb2478641bd4df
CRs-Fixed: 2501957
Featurize DHCP indication for SAP and disable it
for QCN7605 as this feature is broken for HL
Data Path.
Change-Id: If1db649131d887a2aab18461187403b4b9a2c5b4
CRs-Fixed: 2496032
The SDIO HIF for QCN7605 requires to use the SDIO Abstraction Layer.
Used the SDIO CNSS2 PLD layer api's to interface with SDIO AL
Change-Id: I839a580941e4651e3dcff4f87cda26cc567687fc
CRs-Fixed: 2275631
Define void * data members of cp_stats with specific type, remove void
pointer usage for part of cp stats code.
Change-Id: Iace37c0a546909b865d5185830a2e02b5b39b7d8
CRs-Fixed: 2492544
As for Rome, currently it usually just only support two
IPA interfaces offload, if use the default value 3, which
will cause the IPA pipe setup failure issue. So export
the max IPA interface numbers, and it's better to set
the appropriate value from build file according to
different requirement for different chipset and platform.
Meanwhile, it support SMMU on the sa415 platform, so
enable SMMU for it.
Change-Id: I2de31bcb4d38f5e7964d2cbdc2fc6f143eef510d
CRs-Fixed: 2480627
Currently ext scan is enabled by default in driver which
is increasing driver size significantly and ext scan
is not getting used anymore.
Disable ext scan with feature flag CONFIG_FEATURE_WLAN_EXTSCAN
to reduce driver size.
Change-Id: Id0fdeae6e6b71f53d3b73322aca659254d52cec8
CRs-Fixed: 2491452
Enable macro DP_RX_PKT_NO_PEER_DELIVER to deliver some RX pakcets
like Eapol even if there is no related peer found, this is
needed for the LFR roaming case.
Change-Id: Ia732c6448319bca122d405d25f2af410df0f4d68
CRs-Fixed: 2491507
New added header file target_if_pub.h is introduced due
to remove void usage for objmgr module, add include path
for this header file to compile.
Change-Id: I4f79e6d3213941b86fbadd42934cd355bcd0a511
CRs-Fixed: 2488101
Enable following special 4 ports concurrency for Auto HST
platform.
(SAP+STA) (2.4G MAC SCC)+(SAP+STA) (5G MAC SCC).
Change-Id: I6ab34606a98c1e4a670de63e12e54f2becd4d1d4
CRs-Fixed: 2457713
The host driver serialization module currently supports upto 4
commands in non scan pending queue. This is calculated at the
wlan_serialization_vdev_create_handler() as:
max_pending_cmds = (WLAN_SER_MAX_PENDING_CMDS /
WLAN_SER_MAX_VDEVS)
But in SAP case, if multiple STA sends deauth at the same time,
4 pending commands in non scan pending queue is not sufficient
and will result in only disassoc from the first 4 STA getting
honored.
The current host wlan driver supports 3 SAP mode and
2 STA vdevs amounting to a total of 5 vdevs supported.
So calculate the total non scan pending commands for
serialization based on the total peers supported for each
mode to fix this issue.
In SAP case, maximum 32 peer are supported and for STA case,
maximum 4 pending commands for serialization. So change the
max pending commands calculation as:
max_pending_cmds = (No. of sap modes supported * 32) +
(No .of STA modes supported *4 )
Change-Id: I30b2d79f2c15a092060dbdd729e1d035eb36fd83
CRs-Fixed: 2468945
Check if host is reaping a descriptor which is already
reaped then drop RX desc processing instead of asserting.
Macro DUP_RX_DESC_WAR added before dp_rx_dump_info_and_assert function
which does not assert for the case WAR is enabled.
Change-Id: I8a095d33e4f7e868340d9a76618c064af764386d
CRs-Fixed: 2487793
Add feature flag PCIE_REG_WINDOW_LOCAL_NO_CACHE to support no
caching of PCIE register window value in driver.
Change-Id: I427b784de874464b98a2acf67b9850e1e41f65aa
CRs-Fixed: 2487158
This command is used to send OEM data binary blobs
from application/service to firmware.
Change-Id: I0b5d7dd5a030b70e59c8581fb51d99079b38385f
CRs-Fixed: 2477332
Currently there is no ini support to configure frequencies
which needs to be avoided for the acs channel list which
may allow SAP to come up on a channel which is not preferred.
For Example there are many legacy clients which supports
2.4GHz but don't support channel 12 and 13 (or does not have
the capability to detect country change where channel 12 and
13 is valid).
In that case, if SAP comes up on channel 12/13, those legacy
clients won't be able to connect to AP.
Hence, Add a feature flag and ini to configure the frequency
list which can be avoided during acs.
Change-Id: Id106b38228f837ba056eb916004dc012e919ddd2
CRs-Fixed: 2472004
Move definition of HIF_CONFIG_SLUB_DEBUG_ON to driver Kbuild,
to cleanup CONFIG_MCL/CONFIG_WIN dependency.
Change-Id: I3f4abf546c5c9fe08531a14234f149a82cd14bf1
Featurize wmi multi mac service with the feature flag
WMI_MULTI_MAC_SVC, to cleanup CONFIG_MCL dependency.
Change-Id: Id159a514cf3773e4dcbc0ecd290014b828673882
In P2P GO mode, if the P2P client device is not VHT capable and
only HT capable, but the DUT P2P GO is VHT capable and advertises
2x2 NSS and sends packets with 2x2 rates, it results in interop
issues with HT only capable P2P client devices.
When GO is operating in DBS mode, GO beacons advertise 2x2
capability but include OMN IE to indicate current operating mode
of 1x1. But here peer device is only HT capable and will not
understand OMN IE.
Check if the P2P client device is only HT capable and has
"\x00\x50\xf2\x04". Then downgrade the P2P GO operation to 1x1
nss. Modify rx mcs map value in association response to enable
only mcs 0-7.
Change-Id: I7177c5aee9a560a20c50a63886c0ee77f7d617ae
CRs-Fixed: 2464925
As single CPU and low frequency platform, the held time of spin lock
easily exceed the max time allowed when system taking heavy payload.
then crash occur. To address this, Disable QDF_LOCK_STATS_BUG_ON on
SDXPRAIRIE platform.
Change-Id: I156a003b361f3653591102de1cde9b131c467968
CRs-Fixed: 2456386
qcacld-2.0 to qcacld-3.0 propagation
This change adds support for driver supported TCP
delayed ack to increase TCP RX performance in
third-party platform which does't support kernel
TCP delayed ack feature.
TCP delayed ack is dependent on count and timer
values. Whatever is achieved first will trigger
sending TCP ack.
This feature can be controlled through ini values.
gDriverDelAckTimerValue - timer value in ms
gDriverDelAckPktCount - delayed ack count
gDriverDelAckEnable - enable/disable feature
Change-Id: I8105bbb90965295b5a4aefeb00d344a90155974d
CRs-fixed: 2414224
Add feature flags DP_FLOW_CTL to featurize DP flowctl ops,
DP_PEER_MGMT to featurize peer handling in DP,
DP_POWER_SAVE to featurize power saving ops in DP.
Change-Id: I02f487fec846e9dd9ffcaf53a10e49e7a3365fff
Add a feature flag enabling support in defconfig
for the datapath event history logging feature.
CRs-Fixed: 2466616
Change-Id: I8fc2c76a927aea3e2e723cde87c69e59e03a9848
Propagation from qcacld2.0 to qcacld3.0.
The WMI CMD and EVENT of "get antenna isolation" are already defined,
but not used before in qcacld3.0.
Now, The host driver uses vendor command to get this information
instead of iwpriv command in qcacld-2.0.
The attribution of this feature is already defined in file
"qca_vendor.h". The name is "QCA_WLAN_VENDOR_ATTR_ANTENNA_ISOLATION".
So host driver will use vendor command
"QCA_NL80211_VENDOR_SUBCMD_GET_HW_CAPABILITY" to get the information
from lower layer.
Change-Id: I915768f622ddc9a70a95ce4fe952f19917a8f901
CRs-Fixed: 2447360
Add QCA_LL_PDEV_TX_FLOW_CONTROL for both
QCA_LL_LEGACY_TX_FLOW_CONTROL and QCA_LL_TX_FLOW_CONTROL_V2
disabled platform, avoid frame drop in driver which leads to bad TCP
TX throughput. Change NUM_TX_QUEUES to 5 for this case to avoid invalid
memory access in wlan_hdd_netif_queue_control().
Change-Id: Ifa649e31a41d1bf89eadc8cc7e9520f0e27b9fe4
CRs-Fixed: 2466996
Link BLM exposed APIs to the following:-
1. csr_get_scan_result:- Link this API with filter bssids in
the reject ap list maintained by the blacklist mgr.
2. lim_assoc_rej_add_to_rssi_based_reject_list:- Link this API
with the the blacklist mgr add bssid to reject list to add the
OCE and BTM related assoc rejects.
3. Userspace avoid list parsing logic for the userspace to set
the BSSID as avoided.
Change-Id: Id51ffb80cea3f845fefe14db25d0f7acda6ea0f3
CRs-Fixed: 2461281
Remove CONFIG_MCL for reduction limit to make code generic.
Initialize value for reduction limit i.e WLAN_SCHED_REDUCTION_LIMIT
to 0 for MCL. In case WLAN_SCHED_REDUCTION_LIMIT not defined, then
define WLAN_SCHED_REDUCTION_LIMIT to 32 for WIN.
Change-Id: I6f6e4c9b3df71110654d487fcdae0334eeee4091
CRs-Fixed: 2459119
Implement the interface to transfer the info between
host driver and firmware about the ap which has interop
issues with the DUT. It is detected by firmware and
forwarded to user sapce for persistent storage. And
user space configs these APs to firmware when the DUT
starts up next time.
CRs-Fixed: 2425202
Change-Id: I2e828d521f0e04862a01fa1c90626f51b7f65796
Add a compile time feature flag by name RX_DESC_MULTI_PAGE_ALLOC
which will enable the memory allocation of RX descriptors using
multiple pages instead of large contiguous memory.
Change-Id: Ia3803a3685c605c79a34a0c2c000d7ed4adb7d97
CRs-Fixed: 2456267
Remove CONFIG_MCL for Serialization msg queue depth to make code generic.
Initialize value for Serialization msg queue depth i.e
SCHEDULER_CORE_MAX_MESSAGES to 1000 for MCL. In case
SCHEDULER_CORE_MAX_MESSAGES not defined, then
SCHEDULER_CORE_MAX_MESSAGES define to 4000 for WIN.
Change-Id: I498cfb73ed7774d9d26b1374ee87b1a7691341d9
CRs-Fixed: 2457704
Add new vendor cmd : QCA_NL80211_VENDOR_SUBCMD_BEACON_REPORTING.
This subcommand is used to implement asynchronous beacon
reporting feature. Userspace can request driver/firmware to
report details of each beacon received whose bssid is same as
currently connected BSS's mac address. The driver will encapsulate
the details of these beacons as an asynchronous event within this
command id until userspace requests to stop sending beacons.
Change-Id: I9a32fe5431767b077983c7db90a2f825709f368c
CRs-Fixed: 2431351
Adaptive 11r feature that enables the AP to support FT-AKM
without configuring the FT-AKM in the network. The AP will
advertise non-FT akm with a vendor specific IE having Adaptive
11r bit set to 1 in the IE data. The AP also advertises the
MDE in beacon/probe response.
The STA should check the adaptive 11r capability if the AP
advertises MDE in beacon/probe and adaptive 11r capability in
vendor specific IE. If adaptive 11r capability is found,
STA should advertise the FT equivalent of the non-FT AKM.
Introdue a compile time flag WLAN_ADAPTIVE_11R_ENABLED to
enable/disable adaptive 11r support.
If the AP is adaptive 11r capable, set the is_adaptive_11r_ap
flag in bss descrtiptor. This flag will be sent in join request
and populated to pe_session. Also mark the CSR session as
adaptive 11r session based on this flag.
Add changes to check for the adaptive 11r service capability
advertised by firmware. If the host driver connects to adaptive
11r AP, enable RSO only if the firmware advertises adaptive
11r capability, else RSO should be disabled.
If the connection is adaptive 11r connection and if the adaptive
11r ini is enabled, set the adaptive_11r flag in
wmi_roam_11r_offload_tlv_param sent over the wmi command
WMI_ROAM_SCAN_MODE to the firmware. This will enable firmware to
filter the adaptive 11r AP from roam scan results.
Change-Id: If27a2393e3f4bb68942f5ebcec0135f57627f16b
CRs-Fixed: 2437988
Introduces a new build flag 'DYNAMIC_SINGLE_CHIP':
If DYNAMIC_SINGLE_CHIP is defined, which means there
are multiple possible drivers, but only requires one
instance of driver at a time. In such case, leave
MULTI_IF_NAME undefined, no matter what the module
name is, only prepend DYNAMIC_SINGLE_CHIP to names
of firmware/mac/ini files.
Take path of driverdump and ini file for example:
If both MULTI_IF_NAME and DYNAMIC_SINGLE_CHIP are not
defined, the paths are:
driverdump: '/proc/debugdriver/driverdump'
ini: '/<fw_root>/wlan/qca_cld/WCNSS_qcom_cfg.ini'
If DYNAMIC_SINGLE_CHIP is defined as 'qca6174':
driverdump: '/proc/debugdriver/driverdump'
ini: '/<fw_root>/wlan/qca_cld/qca6174/WCNSS_qcom_cfg.ini'
If MULTI_IF_NAME is defined as 'qca6174' and
DYNAMIC_SINGLE_CHIP is not defined:
driverdump: '/proc/debugdriverqca6174/driverdump'
ini: '/<fw_root>/wlan/qca_cld/qca6174/WCNSS_qcom_cfg.ini'
On LA platform, DYNAMIC_SINGLE_CHIP is controlled by
TARGET_WLAN_CHIP and TARGET_MULTI_WLAN:
If more than one WLAN devices are enabled in TARGET_WLAN_CHIP,
and TARGET_MULTI_WLAN is not set to 'true',
DYNAMIC_SINGLE_CHIP will be set to the device name, to
avoid name conflicts of firmware/mac/ini files;
meanwhile, MODNAME is set to 'wlan', then paths for
debugging are not changed.
Otherwise, MULTI_IF_NAME will be defined if requires
multiple instances of driver.
Change-Id: I22ed34d80d3540451bf8b891243c6cdac5a73d7e
CRs-Fixed: 2402432
Roam channel map is got by searching current ssid in scan db,
For hidden ssid, probe resp has ssid, but beacon usually has NULL
ssid. we'd better keep ssid from probe resp as long as possible,
don't override with NULL ssid from beacon as WIN's way.
Change-Id: Ia9295832926129a1f9f29785703d44e8268e750d
CRs-Fixed: 2427355
Use WLAN_FEATURE_DP_BUS_BANDWIDTH to instead of MSM_PLATFORM for better
reading.
Change-Id: Iaed4f77b09b80ca8872a69c832491598db021232
CRs-Fixed: 2423299
Memory optimize for QCS403 platform, 1x1 chip. Reduce CE1 htt data
dest ring buffer from 512 to 256, reduce CE2 wmi dest ring buffer from
128 to 64, reduce CE9 & CE10 desg ring buffer from 512 to 64, disable
CE11 pktlog. Note: this change only affect specific WLAN build config for
extremely saving memory, for debug purose, there is another build
selecting default WLAN config for reference HW.
Change-Id: I868e74b09cdb11df3dccaa3f9e051da55724983d
CRs-Fixed: 2432631
Implement NON-QC platform TSF and TSF PLUS.
Implement gettime of PTP.
Implement TSF PLUS for SAP/GO
CRs-Fixed: 2399624
Change-Id: Id4f41a94256a8f035ae408c168c246569185c534
Add new feature flag for nbuff replenish timer apis to
replace CONFIG_MCL flag.
Change-Id: Ibb65dd28b657085a20b6e3b036e6f96b4851481e
CRs-Fixed: 2421564
Add support to get the various Coex data from the debugfs.
This commit adds the support to get the various coex data:
* COEX STATE
* COEX DPWB STATE
* COEX TDM STATE
* COEX IDRX STATE
* COEX ANTENNA SHARING STATE
The specific state information can be read via the debugfs.
Example to read the COEX STATE logging:
sm6150:/ # cat /sys/kernel/debug/wlan/mws_coex_state
vdev_id = 0
coex_scheme_bitmap = 0
active_conflict_count = 0
potential_conflict_count = 0
chavd_group0_bitmap = 0
chavd_group1_bitmap = 0
chavd_group2_bitmap = 0
chavd_group3_bitmap = 0
Change-Id: I92272ad7edf44df22730ac0fa992d876840ba632
CRs-Fixed: 2413943
Resolve ipa compilation issue for targets with config
ipa unified api enable and have kernel version 4.9.
Change-Id: Ibf7c51e32850024ceeb154f18a272044482af5ba
CRs-Fixed: 2422172
Monitor mode feature not required on SDXPRAIRIE, and disable
it to save memory.
Change-Id: I206ef4441cc64218cbdcea08aaa3ce584aa99bf0
CRs-Fixed: 2418590
The API's added in qal & qdf for abstracting the
OS calls are inlined and moved to the OS-specific
src directories.
Remove compilation of these specific files from qcacld Kbuild.
Change-Id: I0416ae721d4c86000672168da396966dd452363c
CRs-Fixed: 2418669
Coex priority on some scenarios need to be updated.
Host will transfer the chosen coex config attributes
by WMI command.
Change-Id: Ic28ad6af462b305ec9aaf3027d76bce9ae6320b1
CRs-Fixed: 2410493
Due to PTA matser limitation, zigbee joining network success rate
is low while wlan is working. Wlan host driver need to configure
some parameters including Zigbee state and specific WLAN periods
to enhance PTA master. This mechanism is called MPTA helper.
Vendor subcommand QCA_NL80211_VENDOR_SUBCMD_MPTA_HELPER_CONFIG
is added to realize this feature. NL attributes
qca_mpta_helper_vendor_attr is used to deliver parameters from
uplayer to host driver.
Change-Id: Ic76130e4b92c88e8034f6a0c6c0447c9c6dee945
CRs-Fixed: 2407801
Define the following scan related macros in the Kbuild.
This is part of CONFIG_MCL cleanup, where these macros
are removed from common.
MAX_SCAN_CACHE_SIZE 300
SCAN_MAX_REST_TIME 0
SCAN_MIN_REST_TIME 0
SCAN_BURST_DURATION 0
SCAN_PROBE_SPACING_TIME 0
SCAN_PROBE_DELAY 0
SCAN_MAX_SCAN_TIME 30000
SCAN_NETWORK_IDLE_TIMEOUT 0
HIDDEN_SSID_TIME (1*60*1000)
SCAN_CHAN_STATS_EVENT_ENAB (false)
Change-Id: I43e3a73e2b31c25ea688f913768cfd51d531bbbe
CRs-Fixed: 2412779
Do not use MCL in the macro. Use feature name to define macro.
This is for CONFIG_MCL_REGDB cleanup.
Change-Id: I12af832d81815277ec6014ff5047bf960f01534a
CRs-Fixed: 2411995
Remove flag CONFIG_PER_VDEV_TX_DESC_POOL.
Legacy per vdev flow control implementation under
CONFIG_PER_VDEV_TX_DESC_POOL was never used in cld3.0 driver.
For a Genoa a new per vdev flow control implementation for HL systems,
was added under the flag QCA_HL_NETDEV_FLOW_CONTROL.
Hence remove CONFIG_PER_VDEV_TX_DESC_POOL and replace it with
QCA_HL_NETDEV_FLOW_CONTROL or QCA_LL_LEGACY_TX_FLOW_CONTROL whereever
applicable.
Change-Id: Ibdf88e60cff7d3be46924ce7605f468781b5b856
CRs-Fixed: 2373790
Add the support to allow user space applications through cfg80211
vendor command to check if wlan firmware is alive or not.
Change-Id: I96bb16e01974f7689493577741a36e3832963996
CRs-Fixed: 2399508
An ancestor of the current driver used mailboxes for communication
between SME and LIM, and serialization/deserialization routines were
used to encode and decode the mailbox messages. This mechanism is no
longer in use, but there are remnants still present.
One such remnant is the use of lim_get_session_info(). This API is
designed to extract the Session ID and the Transaction ID from a
serialized message. However this API is actually being used on
non-serialized messages, and as a result of struct padding by the
compiler it would never return a correct Transaction ID. Since we
should now never be sending serialized messages, remove the use of
lim_get_session_info() and instead directly access the elements in the
underlying structs.
Change-Id: Iadb548c36396226b14b904d3bd952c5b4260ff3b
CRs-Fixed: 2402359
The CONVERGED_TDLS_ENABLE feature flag was originally introduced when
the TDLS feature was being componentized so that one could select
either the legacy implementation or the componentized implementation.
That componentization activity has concluded and the legacy
implementation no longer exists. To align with the current usage
switch to exclusively using the FEATURE_WLAN_TDLS feature flag since
that more accurately describes the code being protected.
Change-Id: I2cdb4c6ddba22c5b1d29e87403e5e1c87ce5cbfe
CRs-Fixed: 2395728
When the DHCP_SERVER_OFFLOAD feature is enabled the driver does not
build, so address the build issues.
Change-Id: I42103afd91c4bed2d04f22bdb6159e286ff12fa0
CRs-Fixed: 2399937
Currently the TDLS component code is unconditionally built which will
bloat images where TDLS is not required. Fix this by only building the
TDLS component when the TDLS feature is enabled.
Change-Id: I7496b8f07ed495b00e62fc3cf50a96e1829d9341
CRs-Fixed: 2399966
Change Iaa2efa5f662be014a61a8490c3fab411ec0f2054 added qdf_status.c.
Include this file in the Kbuild.
Change-Id: I263924b4ec82d2e3137f659144251b4a43e5d30f
CRs-Fixed: 2395179
Move the contents of hdd_dsc to the new files added in osif/sync as part
of Ica94d32028d10d344294d6cc12d91a06efe1ab6c.
Change-Id: I556e9d2833edd2bd26266496b6000347649c5fbe
CRs-Fixed: 2396512
To better align with current organizational recommendations and allow
API use by os_if/nan, begin moving hdd_*_sync APIs to os_if. In step
one, create the new osif_sync file structure.
Change-Id: Ica94d32028d10d344294d6cc12d91a06efe1ab6c
CRs-Fixed: 2396511
Currently 11d offload functionality is in reg_host_11d.c and
reg_host_11d.h files and are getting controlled with a
feature flag HOST_11D_SCAN.
HOST_11D_SCAN flag is to enable host 11d scan and 11d offload
feature should not be controlled with this flag.
Move 11d offload functionality to separate files
reg_offload_11d_scan.c and reg_offload_11d_scan.h and
compilation rule for these files.
Change-Id: I9bb73a5d995083cb746b76901a2db0d37a9b9827
CRs-Fixed: 2382525
As per new requirements to debug game latency related issues,
implement an iwpriv command which:
1) sends a bitmask to FW's Wireless Latency Manager module (WLM).
2) receives from WLM a measurement header along with measurement data.
3) converts both the header and data to a hexadecimal encoded string.
4) returns the hexadecimal encoded string to userspace
Change-Id: Ic79c4b757fe2d4e806306750250e3c102745c486
CRs-Fixed: 2388920
To reduce hard coding in the driver, add the following build config
options with defaults to the Kbuild:
* CONFIG_WLAN_MAX_PSOCS
* CONFIG_WLAN_MAX_PDEVS
* CONFIG_WLAN_MAX_VDEVS (supercedes CONFIG_SIR_MAX_SUPPORTED_BSS)
* CONFIG_WLAN_PSOC_MAX_VDEVS
* CONFIG_WLAN_PDEV_MAX_VDEVS
Change-Id: I14fce4bf34eb511214ad0b31be72336a2620b960
CRs-Fixed: 2393150
Flag WLAN_FEATURE_NAN_DATAPATH was added to protect NAN Datapath
related code, while WLAN_FEATURE_NAN_CONVERGENCE was added to
protect the converged code inside NAN Component. Since the
original NAN Discovery related code has now been moved inside
NAN component and NAN Datapath cannot exist without NAN Discovery,
keeping these flags separate doesn't make sense. Combine these
two flags with WLAN_FEATURE_NAN flag which is the original NAN
feature flag.
As a cleanup of NAN code, combine all NAN related flags with
WLAN_FEATURE_NAN flag.
Change-Id: If98ecaace17f8724e9c28325ef61e721f42e1d8f
CRs-Fixed: 2377375
Required sta interface to support to tx p2p action frames, this is
part of customer requirement.
Change-Id: I1ebebce4d70dcba34427bb2276cd3e1cc23c2bd8
CRs-Fixed: 2388414
When RX_PERFORMANCE is set, bind ol_rx_thread to perf CPU.
Do not update tdls stats and acquire rx_wakelock while
throughput is high, to avoid station drop packets caused
by slow process of ol_rx_data_cb(hdd_rx_packet_cbk).
Change-Id: I411f5ce67b04a70b194b0e8a7f8014b9c2c9bef7
CRs-Fixed: 2373936
Since all wni cfg is refactored based on legacy new cfg framework, no
legacy cfg files is needed now. Cleanup related files in this change.
Change-Id: If46ae4c59f1010a655aa65e3502fc0c660e33cdc
CRs-Fixed: 2383387
Remove g_self_recovery_stats and WE_GET_RECOVERY_STAT
Remove configs of CONFIG_SERIALIZATION_V1 part
Change-Id: I82e72f22215b8794517410e0b8892b5adadcf457
CRs-Fixed: 2386839
Implement a WAR to address a BT coex issue, along with a private ioctl
which can be used to switch the WAR on or off dynamically.
Change-Id: I9d29c141106db479039789d67c45a455e96a118b
CRs-Fixed: 2383150
Revert change I4e2a8d7f98907c205cc6988d8af309e7a5515b89 since
it introduced a build failure on some platforms along with an
inappropriately copyright change.
Change-Id: I1450c69211347afaa79642d99dd153f99f349694
CRs-Fixed: 2386432
Regulatory component is getting updated to reduce the
code size based on different regulatory features. In this
process new regulatory files are getting added and some
of the files are getting removed.
To compile the newly added files update the required changes
in driver Kbuild file.
Some of the functins which are not supposed to be invoked from
outside the component directly, replace those function calls
with the appropriate wrapper functions.
Change-Id: I31a25268250b99f4f156c4f149966213746d999e
CRs-Fixed: 2373780
When RX_PERFORMANCE is set, bind ol_rx_thread to perf CPU.
Do not update tdls stats and acquire rx_wakelock while
throughput is high, to avoid station drop packets caused
by slow process of ol_rx_data_cb(hdd_rx_packet_cbk).
Change-Id: I4e2a8d7f98907c205cc6988d8af309e7a5515b89
CRs-Fixed: 2373936
On QCS405 platform, it's observed that cds_ol_rx_pkt_freeq is empty
while receiving UDP packets, driver try to allocate cds_ol_rx_pkt in
ol_rx_data_process but failed. This leads to lots of frames got dropped.
Raise cds_ol_rx_thread scheduler policy to SCHED_RR to compete with
CE tasklet scheduler speed. With this change, found cds_ol_rx_pkt_freeq
is not going to be empty while receiving UDP packets.
Change-Id: I4bee3d69c2754ec6be10a2b623b4ebe8b2c0859b
CRs-Fixed: 2373936
Enable FEATURE_WLAN_FT_IEEE8021X and FEATURE_WLAN_FT_PSK for Genoa as
targeted kernel version is 4.4.
Change-Id: I599be887b0021e7f53622c840dc76d5e3b47376a
CRs-Fixed: 2359886
Enable QCA_AC_BASED_FLOW_CONTROL in Kbuild file for for all
lithium platform, including HST.
CRs-Fixed: 2371232
Change-Id: I7e755d6211106f4a5c8e9d87905f6425ece4c5c3
NAN component has been moved to CLD. It includes implementation
of the new NAN command QCA_NL80211_VENDOR_SUBCMD_NAN_EXT.
Change the legacy NAN implementation of vendor cmd
QCA_NL80211_VENDOR_SUBCMD_NAN so that the requests go
through the NAN component. Clean up the legacy path.
Functionality remains unchanged for legacy command.
Route the legacy NAN commands through the NAN component.
Change-Id: I542e5afe832619f8c088220cc4456aa7fe4416fd
CRs-Fixed: 2356772
TDLS component related files moved from hostcmn to CLD, this change
adds initial functions, enables TDLS in Kbuild.
Change-Id: Ie5b93f4785c4a973a139dff9e58460fd7ee35e35
CRs-Fixed: 2361589
Policy mgr component related files moved from hostcmn to CLD, this
change add its initializion functions to CLD framework, change Kbuild
to enable it.
Change-Id: I0a87d93b9cf639aa66a10f9ae55ef8cb1dfbb80e
CRs-Fixed: 2361570
Enable the unit test cases for qdf_types, recently added in
I7536a973141a6311662390e42da749f48239bef8.
Change-Id: I4264696d61443acf1bd0993f91de06119471b25f
CRs-Fixed: 2359296
P2P component related files moved from hostcmn to CLD, this change
adds initial functions, enables P2P in Kbuild.
Change-Id: I04102a5f3e59ded13ada15b1b417ae81c7a10e90
CRs-Fixed: 2361500
Implementation of Host driver support to collect per Vdev Beacon
reception Stats from firmware and display the stats in sysfs.
"adb shell cat /sys/class/net/wlan0/beacon_stats"
vdev id: 0
Total Beacon Count: 255
Total Beacon Miss Count: 21
Beacon Miss Bit map [0x800] [0x10000000] [0x22000400] [0x100]
[0x84000000] [0x4030002] [0x5034000] [0x28084]
Change-Id: Iadd31042320f7815a6a6f4733f5393dba93b5b3e
CRs-Fixed: 2360913
Replace legacy string in vdevmgr with ext string.
Also adds new compile CMN_VDEV_MLME_CMPT_ENABLE macro
for VDEV MLME component.
Change-Id: I40ce0c2ee4d653d2f4ce68093e8ad1b2c78bece8
CRs-Fixed: 2361525
NAN related OS IF, Target IF and component files have been
merged into CLD. Add Makefile changes, include correct
files, replace lmac tx/rx ops with the new ops and call
updated API's such as init/deinit.
Complete the remaining changes for moving NAN component
into CLD.
Change-Id: Idcf8816337aa49b399596ce3cdfc9cdab811d386
CRs-Fixed: 2338060
Change the policy & priority of RX thread to improve the RX throughput for
Specified platform.
Change-Id: Ie9df5de6f34d75264c4f3b7bdcb59ab92845a128
CRs-Fixed: 2354502
Enable the scatter gather feature for msm8996 platform to improve
the TCP TX throughput.
Change-Id: I634f48baf2f1f57aa89030acab37ada798ce7d2c
CRs-Fixed: 2344092
Add descriptor timestamp debug info in ol_tx_desc_t and
add APIs to set these values.
Change-Id: I686fccff4268811474630dbea8369fabe82d1517
CRs-Fixed: 2333654
Excessive logging detection was recently added via
If83c6dfccb9d191b02a3a7166b065c0a0704f969. While we would like to enable
this feature with a maximum number of logs per second of 100, there are
still a few outstanding problem areas, like dumping stats via IOCTL.
Instead enable the feature with a max of 500 to catch egregious
regressions, and plan to decrease this to 100 or less once the problem
areas are addressed.
Change-Id: I5b880c2354ec4828e1773eeb43de43a4649d4803
CRs-Fixed: 2340011
Enable the scatter-gather feature for wlan interface, if the wlan
interface is binding to the bridge, which might enable SG & TSO feature
for the bridge and improve the TCP TX throughput much better.
Change-Id: I26101756266878f9f41c5dc2d0b5dad189b44ee1
CRs-Fixed: 2246512
Add SCALE_INCLUDES CONFIG parameter to compile HALhwio.h for QCA6390
as msmhwio.h file is now deprecated.
Change-Id: I4a883101a0ba15d2ab1efcd7bde312e22099a693
CRs-Fixed: 2332023
Policy Manager component needs to adopt a new INI/CFG
infrastructure.
Provide a new infrastructure and remove old INI/CFGs related
to policy manager component.
CRs-Fixed: 2324393
Change-Id: Ia16845c2aef3c5877b0b164fcef13fe7cd41c736
ANDROID_BUILD_TOP variable is being deprecated and thus all paths are
assumed to be relative to the top directory.
However, this is causing problem when some of the paths are constructed
in the Android build system and used in the non-Android makefiles that
are usually executed NOT at the top directory but at a sub directory
using -C option. As a result, the relative path from the Android build
system become invalid in the non-Android makefiles.
In order to overcome the restriction, ANDROID_BUILD_TOP is manually
constructed when invoking the non-Android makefiles by using $$(pwd).
The non-Android makefiles are expected to construct the absolute path
by prepending ANDROID_BUILD_TOP to any path that came from the Android
build system.
Specifically, Kbuild is modified so that ANDROID_BUILD_TOP is prepended
to WLAN_ROOT and WLAN_COMMON_INC to make them absolute paths.
Change-Id: Ic34de7a2bc407153085eb3eb154d6dd71f04eedb
CRs-Fixed: 2328210
Featurize MCL only WMI APIs by compiling them as a separate source.
It enables profiles/configs to selectively compile the WMI APIs
based on whether the feature is required or not.
Featurize WMI APIs and TLVs that are specific to MCL -
- DSRC
- NAN
- P2P
- PMO
- roaming
- concurrency
- STA
- Generic MCL specific WMI (STA)
Change-Id: I3b005b8f60491c7d27cf221b7505116e1b9c1a38
CRs-Fixed: 2333916
Enable TSF for Adrastea arch on Vipertooth chip firstly and
expose TSF time mapping via file system
CRs-Fixed: 2320218
Change-Id: Ifda0d8035717ad21edb1a393ef32f1157ab59105
Enable QCA_WIFI_3_0 flag based on CONFIG_WIFI_3_0_ADRASTEA
and not based on CONFIG_ICNSS to enable it in Genoa.
Change-Id: I819fcbb637c4ed302cf71d32e83b113911270750
CRs-Fixed: 2317206
1. Set all MCL cmds as blocking cmds.
2. Rename WLAN_SER_CMD_STOP_BSS to WLAN_SER_CMD_VDEV_STOP_BSS.
3. Add new binary files and remove old binary files in Kbuild.
4. Disable CONFIG_SERIALIZATION_V1 in Kbuild, switch to new
serialization code.
Change-Id: I46f876e4cbc31881ca0559e4705cddf4a26a46c1
CRs-Fixed: 2315411
CE service file includes APIs for both legacy and lithium architecture.
Legacy service APIs compiled for lithium architecture.
Separate the CE services into legacy and srng and selectively compile
required files.
Change-Id: Iad6b6c7cef7520e1e7b74da83805290eddcbabf6
CRs-Fixed: 2304556
