Converged host driver code listens for a vdev_destroy event from
object manager to release vdev related resources. Currently, vdevs
are destroyed in firmware before they are destroyed by object manager,
leading to a possible use-after-free situation in firmware. Reverse
the order of vdev destroy, first in object manger, then in firmware,
to prevent the potential use-after-free.
Change-Id: I54bbede9732cecb3bec291692f452758976184c4
CRs-Fixed: 2024633
Rename the HDD object manager wrapper functions to better reflect their
relevance to object manager.
Change-Id: Ic12cd192096c9fd89dd19568edfaac72001cd965
CRs-Fixed: 2025251
Since converged P2P component supports rx vendor specific public
action frame, not register in hdd layer again.
Change-Id: Ic0aaecffbffeb61ff4413d46c58a97c2bfb4ea84
CRs-Fixed: 2024394
Free memory allocated in ol_tx_desc_dup_detect_init() and spinlock
created in ol_txrx_pdev_post_attach() in case of failure condiiton.
Change-Id: I7e3909622e5b63af2d20c2c8cc0a8cc4350e4085
CRs-Fixed: 2024377
qcacld-2.0 to qcacld-3.0 propagation.
There is a race condition, LTE channel avoidance indication is received
while BSS is starting, thus BSS is starting on the unsafe channel and
driver is not honoring the unsafe channel list given by LTE
coex event.
Always check current operating channel with unsafe channel list on
SAP start.
Change-Id: Ieda6fd4c6fa61fd45d340a850d61a6954d2a67a9
CRs-Fixed: 1106969
Currently, Host modify the vdev pause bitmap
directly which may be problematic in scenario
where this value update information need to
notify to other components.
Hence as a part of this fix, Add (set/clear/update) API's
for vdev pause bitmap modification.
Change-Id: I5c8d6576d27076f697463b42632962327306902f
CRs-Fixed: 2013376
qcacld-2.0 to qcacld-3.0 propagation
In function sap_process_avoid_ie, if type of avoid_ch_ie is not
QCOM_VENDOR_IE_MCC_AVOID_CH, we need to get next node(scan result)
for process. Otherwise the dead loop causes VosMcThread stuck.
Change-Id: If0e736c5b8a5638ea2bc96c3afb25be286959942
CRs-Fixed: 2019048
There is a possible case for pending_event queue corruption during
driver unloading, by using differnt lock between hdd_ipa_wlan_evt()
and hdd_ipa_uc_proc_pending_event().
Fix by using the same ipa_lock for pending_event queue processing.
Change-Id: If01ded0c2f7d1547b33da6401a98b6495811024d
CRs-Fixed: 1110222
If the device is DBS capable, then it may switch between 2x2 and
1x1 depending on the active session. If the reference device is
non-VHT STA and is HT-STA, then the reference device may not be
able to decode operating mode notification frame. Thus, there can
be IOT issues.
The fix is to associate with non-VHT STA that are HT STA with 1x1
Nss capability.
Change-Id: Ic6c889f18a2e20bbde9e0d8228de65cffa5162b8
CRs-Fixed: 2023200
Currently, WMA is not checking whether the south bound disconnect
(deauth/disassoc from AP) is in progress before processing
LFR3 Roam synch indication which leads to FW out of sync with host.
Fix is to ignore LFR3 Roam Synch Indication if south bound disconnect
is in progress in host.
Change-Id: If3c78139cf1d1d0aa0f977bd2cbdca53c7b1a81c
CRs-Fixed: 2019702
Add support to enable or disable range extenstion using
enable_range_ext iwpriv command. get_range_ext iwpriv is used
to check if range extenstion is enabled or not.
Change-Id: I2231ef9641cfa669dd4b1e820a3b7ec00546a9a3
CRs-Fixed: 1073481
Add support to enable or disable DCM using enable_dcm
iwpriv command. get_dcm iwpriv is used to check if
DCM is enabled or not.
Change-Id: I9d81bba92d227a238faf2e705132c80c8e91de86
CRs-Fixed: 1073481
Update shortgi to handle values upto 4. With support
of 802.11ax, short gi value can go upto 4. This change
set will add support to handle that.
Change-Id: Ifb7e6b0b6298995758bf065c6e54d58d5bd65496
CRs-Fixed: 1073481
Add support for vendor commands to query HE capabilities.
Add support to include HE capabilities in wma_handle as received
from FW to be sent to userspace when queried via vendor sub command.
Change-Id: Icbf141bd1e0646346c2b18aabf3dfb3590d853d7
CRs-Fixed: 1073481
There is a chance that roaming_in_progress is not reset if
WOW_REASON_AP_ASSOC_LOST is received before roaming abort.
Clear roaming_in_progress during disconnect to fix this.
Also, clear connection_in_progress, defer_disconnect and
disable napi.
Change-Id: I9d7b80d83b423b0d5471ddb1aadc4d181fe76116
CRs-Fixed: 2022412
Currently, vdev_id and session_id are assumed to be the same, but are
generated in two separate code paths. Unsurprisingly, this leads to a
whole host of desync issues. Instead, modify sme_open_session to take
a session_id, which will be populated with an objmgr vdev_id. This means
vdev_id and session_id can no longer desync, as there is only a single
source for both.
Change-Id: I104aba29beb3c19d0ef2ff23380e3d005e01ced0
CRs-Fixed: 2022136
