Currently for SAP mode, issue is only first valid sta is
requested to print REO stats where sta_info pointer does
not move along with the loop.
Fix is to print REO stats for both vdev peer and sta peers
in SAP mode.
Change-Id: I4864dbecace091fd086f184599e108ad3f2e3d37
CRs-Fixed: 2423173
Implement NON-QC platform TSF and TSF PLUS.
Implement gettime of PTP.
Implement TSF PLUS for SAP/GO
CRs-Fixed: 2399624
Change-Id: Id4f41a94256a8f035ae408c168c246569185c534
Scan queue isn't unregistered, lead to scheduler queue leakage,
after driver module start/stop several times, scheduler queues
are used out, can't register any more.
Change-Id: I98d81591aee25a5e18e560766fb077733eb1b671
CRs-Fixed: 2431696
If the FW doesn't send the ext service ready event, and
thus the host does not get the max chainmask that both
the macs can support, the host still updates the ini
with the minimum of the host, and FW config, which can
lead to functional issues in connection, and scan.
Fix is to honour the setting only if the FW sends a non
zero positive chainmask for both macs.
Change-Id: I2a321923a2f995cca20cef3980acb1bf41ca0db0
CRs-Fixed: 2429584
It will access pointer to session entry before NULL pointer check. So,
fix it and avoid to possible NULL pointer dereference.
Change-Id: I4a62b4600053ccc1eb4b63c3fbce9ebcfe0656ee
CRs-Fixed: 2423715
Presently for SAP and p2p go a session is created in the firmware
and umac once the add virtual interface is received. It was
added previously when the session is not supported from the interface
up.
Now driver supports creation of the session from the interface up
for the beaconing entities the legacy code is removed.
Change-Id: Icf6aaac3722cf9292fb1519ba5e0aed74834895f
CRs-Fixed: 2368329
The only function called through this pointer type doesn't return
a value and the caller doesn't check for a return value. Change
the function pointer type to return void to fix a CFI failure due
to a type mismatch:
CFI failure (target: [<ffffff853ba7cee8>]
hdd_ipa_send_skb_to_network+0x0/0x4 [wlan]):
...
Call trace:
__ubsan_handle_cfi_check_fail+0x50/0x58
__cfi_check+0x31fa0/0x3d5a4 [wlan]
wlan_ipa_w2i_cb+0x5fc/0x8fc [wlan]
...
Change-Id: I94f6bb0fc06acebde12cf80294999d9419296c4a
CRs-Fixed: 2431600
Fast path is not supported in ROME, remove CONFIG_WLAN_FASTPATH
from qca6174_defconfig
Change-Id: I3606abfc6f375852159a9d94345e165fbe4d06c6
CRs-Fixed: 2428550
Pointer 'req' is dereference before null check which can lead
to null pointer dereference.
Pointer 'body' is never null check after allocation of memory.
qdf_mem_malloc can return null and when pointer 'body' is
dereference, it can lead to null pointer dereference.
Change-Id: I62f26341079d4849c56f7d35d0b7c64df6b49f3b
CRs-Fixed: 2424010
The host driver handles update connect params sent from
userspace and updates the FILS auth type or FILS Erp info based
on the UPDATE_FILS_AUTH_TYPE(2) or UPDATE_FILS_ERP_INFO(1) bit
set in the changed flag.
Handle the association IE update sent from userspace also.
UPDATE_ASSOC_IE(bit 0) will be used to check if assoc IE needs
to be updated. This assoc IE should be sent to firmware. MBO IE
is updated as part of this IEs from the WNM action frame
received by the userspace when setting non preferred channel list
from the AP. If host driver fails to update these IEs to
firmware, MBO IE will not be sent in reassociation request frame
and MBO testcases will fail.
Parse the assoc IE into hdd_adapter->roam_profile. If
parse and validation is successful, copy the assoc IE into
csr_roam_session of the corresponding vdev. Send RSO update
command to firmware, with updated assoc IEs.
Also currently the driver registers update_connect_params
event only if FILS compile flag and UPDATE_CONNECT_PARAMS
flag is enabled. Exclude FILS flag check from this conditional
condition and check only for UPDATE_CONNECT_PARAMS.
Change-Id: I29fadebc9a7fc43937b805f0f041bb86ddf85cbd
CRs-Fixed: 2429665
Current gTxChainMask1ss is 1 by default, only chain 1 can be used
by wifi when bt co-ex, if only chain0 exist or green AP switch to
1x1 mode, wifi tx will fail, connect will fail.
Add clear comment for gTxChainMask1ss to avoid confusing.
gTxChainMask1ss is only used by Rome, not by Helium and HST.
NOTE WELL: This change will have an adverse impact on products
which implicitly expect gTxChainMask1ss=1 behavior. Any such
products must update their INI file to add an explicit
"gTxChainMask1ss=1" entry.
Change-Id: I44f34f80200d057188a77f6f564a13c768fc727e
CRs-Fixed: 2426623
Set device HE capabilities to testbed defaults when device is
configured as testbed device.
Change-Id: I5b1d9eb6f0b576f18a5e4d77131354639b0ae2f0
CRs-Fixed: 2428156
If both INI and FW capability is set,
enable capability flag in twt enable command.
Change-Id: I1c070256c4b672b09a1323665fc5a2f166f951fb
CRs-fixed: 2423752
Set rmf enabled flag in lim based on crypto component info
for WLAN_CONV_CRYPTO_IE_SUPPORT feature enabled case.
Change-Id: Ibb07531d6073015d67df94e3666883a6785de476
CRs-Fixed: 2421470
Remove the element ID macros defined in qcacld-3.0 and
replace it with the macros defined in qcacmn.
Change-Id: I01a38e3d6c4857eb48868a34e278366ad9d5d099
CRs-Fixed: 2427311
Some cleanup missing from below change, remove the same to fix
compilation issue.
"Ia5b290e3367a894646f138cfeedcb9ab3012e9be"
Change-Id: I5aea8b2c5a00df6c1f8eef6a106918763816fdd0
CRs-Fixed: 2430444
In policy_mgr_trim_acs_channel_list(), check the range for
pcl to ensure it is less than QDF_MAX_NUM_CHAN
Change-Id: I1326e229e93edef6ac5963c7cc48557cc22e76ba
CRs-Fixed: 2424007
Currently HDD is populating SAP configuration values and
sending it down to SAP module instead use the respective
MLME CFG public API's to get the configuration values.
Move following CFG values:
1. auto_channel_select_weight
2. reduced_beacon_interval
3. dfs_preferred_channel_location
Change-Id: Ic0936a9d96d0587d927ea4d906bd659969415847
CRs-Fixed: 2425524
Add new feature flag for nbuff replenish timer apis to
replace CONFIG_MCL flag.
Change-Id: Ibb65dd28b657085a20b6e3b036e6f96b4851481e
CRs-Fixed: 2421564
The Linux Coding Style enumerates a few special cases where typedefs
are useful, but stresses "NEVER EVER use a typedef unless you can
clearly match one of those rules." The tSirWifiIfaceStat typedef does
not meet any of those criteria, so replace it (and the "tp" variant)
with a properly named struct.
Change-Id: I70f0e8c038d061cb201b52ce07097c68bcb93346
CRs-Fixed: 2428989
In USB devices even if the driver returns an error from bus_suspend,
still the kernel/platform goes into suspend as any error from USB
bus_suspend is ignored.
During suspend, if WoW or suspend was NACked by FW, we should not
send WMI_WOW_HOSTWAKEUP_FROM_SLEEP_CMDID, WMI_PDEV_RESUME_CMDID to disable
WoW or resume device (in the next system resume)
Add new PMO API to get target suspend state and use it to check if
device should be resumed.
Change-Id: Ic6be05f4f2d36ffe174774b6cd55c6da6b1ea1b8
CRs-Fixed: 2421591
Currently, RSN IE is added to additional IE. Driver does not
generate additional IE .
This reverts commit I2a67156e66e255e7c007a5925cd81b859009114e.
Change-Id: I341897374736483742fa34585e2e8849d4a8a891
CRs-Fixed: 2427098
Driver uses cipher stored in vdev to get the MIC length, which
may get updated if multiple peer(TDLS peer in STA case) get
connected to the vdev. Thus depending on latest peer cipher type
the MIC length will be calculated for all peers.
To fix store cipher info in peer and use it to calculate MIC length
for the frame.
Change-Id: I8afbf9a3bb43c294dbacbbaa7fa0746600937d11
CRs-Fixed: 2428482
Scan on channels triggered as part of active mode RRM
beacon report request fails on receiving roaming
indication from firmware due to get_session_id_from_bssid
failure. So current req in RRM PE context will not be freed
and as a result all subsequent beacon report requests will
fail.
Fix is to free current req in RRM PE context on scan
req failure due to STA roaming to a different AP.
Change-Id: Ib911ddcc7538bb5f3711647bb83a1978d1a1af73
CRs-Fixed: 2419044
