Commit Graph

92034 Commits

Author SHA1 Message Date
Peter Hartley
b01cd93789 V4L/DVB (7293): DMX_OUT_TSDEMUX_TAP: record two streams from same mux, resend
Currently (in linux-2.6.24, but linux-dvb hg looks similar), the
dmx_output_t in the dmx_pes_filter_params decides two things: whether
output is sent to demux0 or dvr0 (in dmxdev.c:dvb_dmxdev_ts_callback),
*and* whether to depacketise TS (in dmxdev.c:dvb_dmxdev_filter_start).
As it stands, those two things can't be set independently: output
destined for demux0 is depacketised, output for dvr0 isn't.

This is what you want for capturing multiple audio streams from the same
multiplex simultaneously: open demux0 several times and send
depacketised output there. And capturing a single video stream is fine
not what you want: you want multi-open (so demux0, not dvr0), but you
want the TS nature preserved (because that's what you want on output, as
you're going to re-multiplex it with the audio).

At least one existing solution -- GStreamer -- sends all its streams
simultaneously via dvr0 and demuxes again in userland, but it seems a
bit of a shame to pick out all the PIDs in kernel, stick them back
together in kernel, and send them to userland only to get unpicked
again, when the alternative is such a small API addition.

The attached patch adds a new value for dmx_output_t:
DMX_OUT_TSDEMUX_TAP, which sends TS to the demux0 device. With this
patch and a dvb-usb-dib0700 (and UK Freeview from Sandy Heath), I can
successfully capture an audio/video PID pair into a TS file that mplayer
can play back.

Signed-off-by: Peter Hartley <pdh@utter.chaos.org.uk>
Acked-by: Andreas Oberritter <obi@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24 14:07:46 -03:00
Michael Krufky
3c66e4e18b V4L/DVB (7289): cx88: enable IR receiver and real time clock on FusionHDTV7 Gold
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24 14:07:46 -03:00
Michael Krufky
76464d412a V4L/DVB (7288): cx88: fix GPIO for FusionHDTV 7 Gold input selection
Fix GPIO for FusionHDTV 7 Gold tv / s-video / composite input selection.
Fix card textual name to match other FusionHDTV device names.

Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24 14:07:46 -03:00
Steven Toth
1117d6ba13 V4L/DVB (7287): cx88: add analog support for DVICO FusionHDTV7 Gold
Signed-off-by: Steven Toth <stoth@hauppauge.com>
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24 14:07:46 -03:00
Marcin Slusarz
a58858556d V4L/DVB (7286): limit stack usage of ir-kbd-i2c.c
ir_probe allocated struct i2c_client on stack;
it's pretty big structure, so allocate it with kzalloc

make checkstack output without this patch:
x059d ir_probe [ir-kbd-i2c]:                           1000

Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24 14:07:46 -03:00
Douglas Schilling Landgraf
1c3bf598cf V4L/DVB (7283): videobuf-dma-sg: Remove unused variable
Removed warning message:

 - videobuf-dma-sg.c: In function 'videobuf_dma_unmap':
 - videobuf-dma-sg.c:281: warning: unused variable 'dev'

Signed-off-by: Douglas Schilling Landgraf <dougsland@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24 14:07:46 -03:00
Brandon Philips
e43d76b40d V4L/DVB (7281): v4l: Deadlock in videobuf-core for DQBUF waiting on QBUF
Avoid a deadlock where DQBUF is holding the vb_lock while waiting on a QBUF
which also needs the vb_lock.  Reported by Hans Verkuil <hverkuil@xs4all.nl>.

Signed-off-by: Brandon Philips <bphilips@suse.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24 14:07:46 -03:00
Guennadi Liakhovetski
9dc4e48fbe V4L/DVB (7276): soc-camera: deactivate cameras when not used
Only attach cameras to the host interface for probing, then detach until
open. This allows platforms with several cameras on an interface,
physically supporting only one camera, to handle multiple cameras and
activate them selectively after initial probing. The first attach during
probe is needed to activate the host interface to be able to physically
communicate with cameras.

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@pengutronix.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24 14:07:46 -03:00
Harvey Harrison
6f2896756c V4L/DVB (7274): dabusb: fix shadowed variable warning in dabusb.c
drivers/media/video/dabusb.c:208:6: warning: symbol 'buffers' shadows an earlier one
drivers/media/video/dabusb.c:63:12: originally declared here

Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24 14:07:46 -03:00
Harvey Harrison
1744a7770c V4L/DVB (7273): suppress compound statement warning in dvb-bt8xx.c
Prevailing kernel style seems to prefer always using braces
for do {} while ().

Add braces to dprintk to suppress the sparse warnings:
drivers/media/dvb/bt8xx/dvb-bt8xx.c:73:2: warning: do-while statement is not a compound statement
drivers/media/dvb/bt8xx/dvb-bt8xx.c:93:2: warning: do-while statement is not a compound statement
drivers/media/dvb/bt8xx/dvb-bt8xx.c:529:2: warning: do-while statement is not a compound statement
drivers/media/dvb/bt8xx/dvb-bt8xx.c:614:4: warning: do-while statement is not a compound statement
drivers/media/dvb/bt8xx/dvb-bt8xx.c:629:4: warning: do-while statement is not a compound statement
drivers/media/dvb/bt8xx/dvb-bt8xx.c:639:4: warning: do-while statement is not a compound statement
drivers/media/dvb/bt8xx/dvb-bt8xx.c:883:2: warning: do-while statement is not a compound statement
drivers/media/dvb/bt8xx/dvb-bt8xx.c:917:2: warning: do-while statement is not a compound statement

Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Manu Abraham <manu@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24 14:07:45 -03:00
Mauro Carvalho Chehab
b573ea0a93 V4L/DVB (7271): cx88-cards: Fix powerangel gpio1
With this gpio, audio works properly.

Thanks to Daniel Fraga <fragabr@gmail.com> for helping on fixing the code for
Powerangel Real board.

Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24 14:07:45 -03:00
Mauro Carvalho Chehab
c4a3ce1cd0 V4L/DVB (7270): cx88-dvb: Renames pci_nano callback
This callback is specific to pci_nano, since supports only dvb. Renames it
to avoid future mistakes.

Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24 14:07:45 -03:00
Mauro Carvalho Chehab
8cd7bf3336 V4L/DVB (7269): cx88: Powercolor Angel works only with firmware version 2.5
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24 14:07:45 -03:00
Mauro Carvalho Chehab
23fb348d00 V4L/DVB (7266): cx88-dvb: convert attach_xc3028 into a function
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24 14:07:45 -03:00
Mauro Carvalho Chehab
64016330b6 V4L/DVB (7265): cx88: prints an info when xc2028 is set or is attached
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24 14:07:45 -03:00
Mauro Carvalho Chehab
0f19e65bc5 V4L/DVB (7264): cx88-cards: always use a level on printk messages
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24 14:07:45 -03:00
Mauro Carvalho Chehab
c450e50e8d V4L/DVB (7263): Some cleanups at cx88 callback methods
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24 14:07:45 -03:00
Mauro Carvalho Chehab
bc36a686a6 V4L/DVB (7262): Add support for xc3028-based boards
This patch adds support for the following saa7134 xc3028 based boards:
132 -> AVerMedia Cardbus TV/Radio (E506R)       [1461:f436]
133 -> AVerMedia Hybrid TV/Radio (A16D)         [1461:f936]
134 -> Avermedia M115                           [1461:a836]
135 -> Compro VideoMate T750                    [185b:c900]

This is based on a original patch thanks to Markus Rechberger that added xc3028
gpio init code for the above boards.

This patch moves saa7134_tuner_callback to saa7134-cards, originally used only
by tda8290 DVB-S boards. The callback was made more generic to support other
tuners.

Currently, it supports both tda8290 and xc2028/xc3028 tuners. Added also the
basis for xc5000 tuner callback.

Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24 14:07:45 -03:00
Mauro Carvalho Chehab
446018d807 V4L/DVB (7261): Use the same callback argument as xc3028 and xc5000
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24 14:07:45 -03:00
Mauro Carvalho Chehab
1fe8736955 V4L/DVB (7260): tuner-xc3028: Don't check return code for clock reset
Only tm6000 needs to be aware when a frequency is being changed. This seems
to improve channel change detection. Other bridges don't need this.
So, better to discard any errors if this fails, and proceed changing the
channels.

Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24 14:07:45 -03:00
Chris Pascoe
8765561fc8 V4L/DVB (7259): FusionHDTV DVB-T Pro tuning problem fixes
It seems that on this board, the demodulator provides the pullup on the I2C
bus, which means that calling i2c_gate_ctrl crashes the bus.  Turn this off
and the xc3028 can talk OK.  Also fix some GPIO related settings that
became more clear through working on this.

Some changes made by Mauro Chehab to allow merging it with some
other xc3028 patches.

Signed-off-by: Chris Pascoe <c.pascoe@itee.uq.edu.au>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24 14:07:45 -03:00
Chris Pascoe
b3fb91d20c V4L/DVB (7258): Support DVB-T tuning on the DViCO FusionHDTV DVB-T Pro
Add support for tuning DVB-T channels on DViCO's FusionHDTV DVB-T Pro board.

The IR remote and analog tuner are not supported at this time.

Some changes made by Mauro Chehab to allow merging it with some other xc3028
patches.

Signed-off-by: Chris Pascoe <c.pascoe@itee.uq.edu.au>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24 14:07:45 -03:00
Mauro Carvalho Chehab
9507901ef3 V4L/DVB (7257): cx88: Add xc2028/3028 boards
This patch ports a patch from Markus Rechberger to work with tuner-xc2028.
It adds entries for several cx88 boards with xc2038/3028 tuners.

Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24 14:07:45 -03:00
Mauro Carvalho Chehab
c2cb8fcc00 V4L/DVB (7256): cx88: Add support for tuner-xc3028
Callback gpio's based on Markus Rechberger, Christopher Pascoe and Steven Toth
patches.

Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24 14:07:45 -03:00
Michael Krufky
8efd2e2826 V4L/DVB (7254): cx88: fix FusionHDTV 5 PCI nano name and enable IR support
load ir-kbd-i2c for IR remote control support on DViCO FusionHDTV 5 PCI nano

Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24 14:07:44 -03:00
Steven Toth
5c00fac0ba V4L/DVB (7252): cx88: Add support for the Dvico PCI Nano
ATSC is known to work.
SVideo / Composite should work (I have no cable to test).
Analog tuner support does not work.

Signed-off-by: Steven Toth <stoth@hauppauge.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24 14:07:44 -03:00
Guennadi Liakhovetski
7102b773d5 V4L/DVB (7250): Clean up pxa-camera driver, remove non-functional and never tested pm-support
This patch addresses most issues pointed out by Russell and Erik, moves
recently introduced into pxa-regs.h camera-specific defines into
pxa_camera.c, removes dummy power-management functions, improves
function-naming, etc.

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@pengutronix.de>
Acked-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24 14:07:44 -03:00
Guennadi Liakhovetski
bb55de3b0e V4L/DVB (7249): Fix advertised pixel formats in mt9m001 and mt9v022
Only advertise pixel formats, that we actually can support in the
present configuration.

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@pengutronix.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24 14:07:44 -03:00
maximilian attems
b1daf7e123 V4L/DVB (7248): dabfirmware.h add missing license
Received written ack from the dabusb author
that the firmware is BSD licensed.
As bonus clarify copyright holder.

Signed-off-by: maximilian attems <max@stro.at>
Acked-by: Deti Fliegl <deti@fliegl.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24 14:07:44 -03:00
Hans Verkuil
9b2e5c6bea V4L/DVB (7245): ivtv: start timer for each DMA transfer
The DMA timeout timer was started once for each set of DMA transfers,
but it should be started for each single DMA transfer.

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24 14:07:44 -03:00
Hans Verkuil
c9aec06f4a V4L/DVB (7244): ivtv: CROP is not supported for video capture
CROPCAP suggests that video capture supports cropping, but this is not the
case.

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24 14:07:44 -03:00
Ian Armstrong
88ab075aee V4L/DVB (7243): ivtv: yuv framebuffer tracking
The existing yuv code limits output to the display area occupied by the
framebuffer. This patch allows the yuv output to be 'detached' via
V4L2_FBUF_FLAG_OVERLAY.

By default, the yuv output window will be restricted to the framebuffer
dimensions and the output position is relative to the top left corner of the
framebuffer. This matches the behaviour of previous versions.

If V4L2_FBUF_FLAG_OVERLAY is cleared, the yuv output will no longer be linked
to the framebuffer. The maximum dimensions are either 720x576 or 720x480
depending on the current broadcast standard, with the output position
relative to the top left corner of the display. The framebuffer itself can be
resized, moved and panned without affecting the yuv output.

Signed-off-by: Ian Armstrong <ian@iarmst.demon.co.uk>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24 14:07:44 -03:00
Tyler Trafford
520ebe5f72 V4L/DVB (7241): cx25840: code cleanup
- Use min()
- Eliminate extraneous variables

Signed-off-by: Tyler Trafford <ttrafford@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24 14:07:44 -03:00
Hans Verkuil
491215d810 V4L/DVB (7240): tveeprom: remove obsolete i2c driver code
The i2c driver code was once added for the out-of-tree ivtv driver,
but the ivtv driver hasn't used that for a long time so this code can
now be removed.

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24 14:07:44 -03:00
Adrian Bunk
4d34dccd5e V4L/DVB (7238): make stk_camera_{suspend,resume}() static
This patch makes the needlessly global stk_camera_{suspend,resume}()
static.

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Acked-by: Jaime Velasco Juan <jsagarribay@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24 14:07:44 -03:00
Guennadi Liakhovetski
0705135e59 V4L/DVB (7237): Convert videobuf-dma-sg to generic DMA API
videobuf-dma-sg does not need to depend on PCI. Switch it to using generic
DMA API, convert all affected drivers, relax Kconfig restriction, improve
compile-time type checking, fix some Coding Style violations while at it.

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@pengutronix.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24 14:07:44 -03:00
Mauro Carvalho Chehab
f13613acfb V4L/DVB (7235): tuner-simple: fix a buffer overflow
simple_set_tv() creates a buffer with 4 elements, and calls
simple_std_setup(), passing &buffer[1]. This makes the 5th element of buffer to
be initialized to 0, overriding some area outside the buffer.

Also, simple_std_setup() receives a buffer as parameter, but the buffer is
just overriden after the call, so, it doesn't make much sense to pass it as a
parameter.

This patch removes buffer[] from the function call, creating, instead, a local
var to be used internally.

Thanks to Axel Rometsch <axel.rometsch@freenet.de> for pointing the issue.

Reviewed-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24 14:07:44 -03:00
Russell Kliese
6a6179b6db V4L/DVB (7230): saa7134: add support for the MSI TV@nywhere A/D v1.1 card
Signed-off-by: Russell Kliese <russell@kliese.wattle.id.au>
Signed-off-by: Hartmut Hackmann <hartmut.hackmann@t-online.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24 14:07:44 -03:00
Hermann Pitton
7b5b3f1765 V4L/DVB (7229): saa7134: add support for the Creatix CTX953_V.1.4.3 Hybrid
Signed-off-by: Hermann Pitton <hermann-pitton@arcor.de>
Signed-off-by: Hartmut Hackmann <hartmut.hackmann@t-online.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24 14:07:44 -03:00
Hartmut Hackmann
1b1cee35de V4L/DVB (7227): saa7134: fixed DVB-S support for Medion/Creatix CTX948
The I2C bus interface of the LNB supply sits behind the i2c gate of the
tda10086, so wrappers were necessary for the set_voltage functions.

For the time being, the board will show up as MD8800

Many thanks to Hermann Pitton for his help

Signed-off-by: Hartmut Hackmann <hartmut.hackmann@t-online.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24 14:07:44 -03:00
Hartmut Hackmann
6ab465a821 V4L/DVB (7226): saa7134: add support for the NXP Snake DVB-S reference design
Signed-off-by: Hartmut Hackmann <hartmut.hackmann@t-online.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24 14:07:43 -03:00
Hartmut Hackmann
4b1431ca1c V4L/DVB (7224): Initial DVB-S support for MD8800 /CTX948
Support is not complete yet and untested.

Signed-off-by: Hartmut Hackmann <hartmut.hackmann@t-online.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24 14:07:43 -03:00
Hartmut Hackmann
26ec394e7c V4L/DVB (7223): Add support for the ISL6405 dual LNB supply chip
The chip can control 2 LNBs independently.
The driver distinguishes them by evaluating the MSB of the override_set
parameter of the isl6405_attach function.

Signed-off-by: Hartmut Hackmann <hartmut.hackmann@t-online.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24 14:07:43 -03:00
Roel Kluin
05b207924d V4L/DVB (7220): drivers/media/video/sn9c102/sn9c102_core.c Fix Unlikely(x) == y
Fix Unlikely(x) == y

Signed-off-by: Roel Kluin <12o3l@tiscali.nl>
Reviewed-by: Luca Risolia <luca.risolia@studio.unibo.it>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24 14:07:43 -03:00
Guennadi Liakhovetski
ef6ad5c35e V4L/DVB (7218): Fix breakage in mt9m001 and mt9v022 driver if "CONFIG_GENERIC_GPIO is not set"
Both camera drivers can function without GPIO support, in which case they
will only support the 10 bit data width mode. But the two respective switch
have to depend on CONFIG_GENERIC_GPIO. Additionally remove redundant
gpio_is_valid tests - they are repeated in bus_switch_request() functions.

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@pengutronix.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24 14:07:43 -03:00
Guennadi Liakhovetski
b4333a3bae V4L/DVB (7217): Replace NO_GPIO with gpio_is_valid()
Upon suggestion by David Brownell use a gpio_is_valid() predicate
instead of an explicit NO_GPIO macro. The respective patch to
include/asm-generic/gpio.h has been accepted upstream.

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@pengutronix.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24 14:07:43 -03:00
Michael Krufky
12afe37818 V4L/DVB (7214): tda18271: move init functions to directly above tda18271_tune
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24 14:07:43 -03:00
Michael Krufky
d1c53424f3 V4L/DVB (7213): tda18271: consolidate tune functions
combine tda18271c1_tune and tda18271c2_tune into a single function

Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24 14:07:43 -03:00
Michael Krufky
4d2d42bcd8 V4L/DVB (7212): tda18271: move rf calibration code from tda18271c1_tune into a new function
move rf calibration code from tda18271c1_tune into a new function,
tda18271c1_rf_tracking_filter_calibration

Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24 14:07:43 -03:00
Michael Krufky
a60b866567 V4L/DVB (7211): tda18271: remove duplicated channel configuration code from tda18271c1_tune
remove duplicated channel configuration code from tda18271c1_tune, instead
call function tda18271_channel_configuration

Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24 14:07:43 -03:00