Commit I1054c7df18780469849be55fc4343f09ac502a49 introduced
excessive logging because PE is using WARN log level to dump
frames. Reduce log level to debug level and remove hexdump
log as its not a fatal/error condition.
Change-Id: I75052c28c4bafdf36ff5fd8837da172ccce1abf8
CRs-Fixed: 2066381
Adding timestamp in version string is causing long compile times
for wlan project. Add option to avoid timestamp so that developers
can avoid long compile times.
Change-Id: Iaa5fd4f432549844ae319451cb43929a2d4b68ea
CRs-Fixed: 2064805
__wlan_hdd_cfg80211_get_station() is notoriously overly complicated.
Begin refactoring this function by factoring out some of the conditional
compilation.
Change-Id: I8a0e66a8dc4bf320080f417b196ead6df06d0995
CRs-Fixed: 2071619
Currently MBO-OCE IE doesn't support different attributes and
consider the IE as fixed IE with only cellular data and assoc
disallowed attributes.
To fix this added support for parsing of different attributes of
MBO-OCE IE
Change-Id: Ia7eb38cec3dbb4022acbcc06588004b5bf4ca87f
CRs-Fixed: 2063865
In few instances memory allocated dynamically, but
its not freed after usage.
free the allocated space after usage.
CRs-Fixed: 2041467
Change-Id: Iae551cd3acbb6bc2618f05cfdc33e4f742d63192
Fix crash due to race condition between MC thread and shutdown
sequence worker thread by moving IPA SSR deinit after MC thread
shutdown.
Change-Id: Id9ee6de5b176e302f865ab959aca29fb708dd6bc
CRs-fixed: 2071804
Configure burst duration for the scan when VDEV is in NDI mode
and at least one peer is connected.
CRs-Fixed: 2055300
Change-Id: I4cd582ad8df6bc2aa2095cff1933b2f9d166fd60
It is better to follow 2 stage sequence for NAN as well like
1) open adapter 2) start adapter (sme_open_session). Since that
is not possible making hdd_init_nan_data_mode happens at the end
when all adapters registered.
Change-Id: Ib67a8f8e9ee5546a77d90d04f0a69a2a5a739e4d
CRs-Fixed: 2049177
NAN Enable/NAN Disable followed by NAN data request causes NDP to
fail. The failure is due to the firmware sending all-zero peer
mac address. Even though, FW should not be sending all-zero
peer address, the host should not attempt to add/delete such
a peer.
CRs-Fixed: 2043780
Change-Id: Ieab390d3fe4c585e1692767839856af2ad17a37b
Gcc 6 introduces some stricter checking for indentation,
causing warnings of misleading-indentation, which are
treated as build errors when drivers are compiled.
Fix all the identation warnings under qcacld-3.0.
Change-Id: Ie197761cfe4334ab14d593adebc56375372ba37c
CRs-Fixed: 2058158
In wma_set_channel function for monitor mode WMI_PDEV_SET_CHANNEL_CMDID
is used to set channel.
In lim, while sending WMA_CHNL_SWITCH_REQ, defer flag was set to wait for
WMA_SWITCH_CHANNEL_RSP from firmware, incase if we don’t use
WMA_CHNL_SWITCH_REQ in monitor mode, send WMA_SWITCH_CHANNEL_RSP
from wma_set_channel itself to reset defer flag in lim.
Change-Id: Ica96be08d8fb2af5ca5dc07182b690ea5c2bdbae
CRs-Fixed: 2010363
If platform has a mechanism to initiate target assert, trigger
that interface to force assert target. Certain integrated platforms
(where WLAN runs on it's own PD) provides a mechanism to initiate PDR
from host. That interface can be triggered when WLAN host detect
timeout scenarios.
CRs-Fixed: 1110243
Change-Id: I6a9408f47ca4245380dbf4177363c3c461ff948d
Return error instead of QDF_BUG(0) in ol_txrx_peer_attach() when it
times out on duplicate peer detection. Peer unmap events from firmware
may take more than 500 ms timeout observed by this routine.
wma_create_peer() should return error status on failure to create peer.
CRs-Fixed: 2004665
Change-Id: I8368c6320139f97584bd1647f1806a695d4a5929
Currently the WMI_PDEV_FIPS_EVENTID handler is registered to use
WMA_RX_SERIALIZER_CTX. However the FIPS feature does not use pMac and
hence does not require serialization through the MC Thread. So change
the registration to use WMA_RX_WORK_CTX.
Change-Id: Iec0b87331008bbe393efa1cbc2071af75012022e
CRs-Fixed: 2068572
When reassoc to AP, pLimJoinReq will be NULL and there is not NUll
check before access, which cause DUT crash. Verify the pointer before
access it, set SMPS for both join and reassoc cases.
Change-Id: Ifbaf8d52c4be1a2a31506e4ab49e6d5b68596645
CRs-Fixed: 2062392
Propagation from qcacld-2.0 to qcacld-3.0.
Currently to get clock boottime, qdf_get_monotonic_boottime_ns
api is getting used which does not include the suspend time.
To include the system suspend time also in clock boottime, use
qdf_get_bootbased_boottime_ns api which uses ktime_get_boot_ns
kernel api.
Change-Id: Ibcc628c315201fa3ced7e1ad96753772d91707b2
CRs-Fixed: 2067770
If do not define QCA_WIFI_3_0, it alloc ipa uc tx buffer by
qdf_nbuf_alloc, but free by qdf_mem_free_consistent, which cause
memory leak. Solution is freeing with corresponding method.
Change-Id: I407712e545acfe5aeef8c8afa58785e42556ca02
CRs-Fixed: 2061922
Currently, for world regd and some other regds where conformance test
limit is NO_CTL, host is sending invalid CTL info to fw instead of
NO_CTL (0xff) due to type conversion issues.
To fix this, use proper unsigned type for CTL info.
Change-Id: I6aff04f0142b5c8e4ff2ea91d85ae7108390c89f
CRs-Fixed: 2056834
When dissassoc or deauth is issued by user a.k.a (supplicant), it has
dependency on few parameters like isFastRoamIniFeatureEnable in
cleanup path. This change removes the dependency.
Change-Id: I601e33e7e57b0ebb76fd06d3c176bfabb9568ba8
CRs-Fixed: 754116
Add below changes to support SSR within SSR,
1.Add new driver state, CDS_DRIVER_STATE_BAD, which will be set
on re-init failure and reset on re-init success and if this
state is set, don't allow any north-bound calls.
2.Don't de-register wiphy/netdev on re-init failure.
3.BUG_ON if re-init or probe fails successively for two times.
4.During driver unload, don't wait for SSR to be completed.
Change-Id: Id05a3e4b592664c9b56c7dd83b965b973f1d5ca5
CRs-Fixed: 2037628
Supplicant reports ACS failed, if driver indicates invalid ht_sec_ch.
Do not assign ht_sec_ch with sec_ch_offset, because they are not the
same thing.
Change-Id: I8fb2a42973b67bb045d385b1fd90ee32917450ea
CRs-Fixed: 2067092
Program num tx chains for 11abg FW via pdev params. This will
help enhance power save in firmware.
Change-Id: I1f5815f2914f65928f8f3d72e53d409ecf6d1fe7
CRs-Fixed: 2056531
Currently, Host uses single wow_wake-lock for all wow
wakeup events like (auth/assoc/deauth/disassoc etc)
which raise difficulty to detect what is actual cause of
holding wake lock.
As a part of this fix, Add separate multiple wake locks
to remove wake lock overloading.
Change-Id: Iac0a6f73ac05dd3960a4ea0229190cb851808e16
CRs-Fixed: 2046511
Restart SAP(P2P_GO) only if ini parameter, sap_restart_on_ch_avoid,
is set. By default its enabled.
Change-Id: I0aee79ba2d5e0cfa8a7b0c7b1901c61614944338
CRs-Fixed: 2023854
Presently, in cds_open() error handling, cds_sched_open is invoked only
in UNINTIALIZED or recovery state but same is not checked while invoking
cds_sched_close.
Invoke cds_sched_close only if driver is in UNITIALIZED state or WLAN
driver recovery is in progress.
Change-Id: I17e2cbe8f859cab4bc12d1a52a583833fb125ada
CRs-Fixed: 2010802
Presently, STOP Driver command is not handled in driver
as interface down will takes care to close the modules
if there are no more interfaces up. But when framework
issues this command, it's going to bad state as driver
returns failure.
To mitigate this issue return SUCCESS for STOP DRIVER command.
Change-Id: I47e6898109a35e3194c18645c932c5b2cf5a73c8
CRs-Fixed: 2006563
