Update WLAN-IPA datapath buffer sharing for SMMU Stage 1
translation support. When SMMU Stage 1 translation is enabled,
DMA APIs return IO virtual address(IOVA) instead of physical
address. This IOVA needs to be mapped to physical address by IPA
module before accessing them.
Change-Id: I6b24cde7b7805395053a8fd8f9afbad202e6105f
CRS-Fixed: 2072960
QDF_TRACE_RATE_LIMITED recently lost its 'rate' parameter in
I31a3f48f68fb6bc67f59f3157a635345943d3331. Update call sites to account
for this change.
Change-Id: I301a36a445be4ecc3e1d24e007d7ca6f05898fc5
CRs-Fixed: 2205796
In hdd replace typedef tCsrRoamProfile with struct csr_roam_profile to
align with the Linux coding style.
Change-Id: I38959a6dadc7f1816548f2fa1c4b404e57070590
CRs-Fixed: 2206694
Prima to qcacld-3.0 Propagation
Currently last connection info is not getting cached, so when
GETBSSINFO command comes information is extracted from current
conn_info which does not contain all the information required
as this information is cleared after disconnection.
To address this issue cache the connection info before
clearing it.
Change-Id: I3ec13264f97e7a4d0dc4699b463074062d087e82
CRs-Fixed: 2204530
Change default value of pcl_weightage to 10, so that PCL weightage
is used while connecting to a profile to select best BSS.
Change-Id: Ic074e01480d32510fb355846d92cb81d01e6e0d8
CRs-Fixed: 2206140
Some of wext public APIs are declared using extern storage
class specifier which is not needed hence clean up extern
keyword from wext public API declarations from wlan_hdd_wext.h
Change-Id: Ib1fe79a94b62bc457784340a7e930489fffe98f9
CRs-Fixed: 2202699
hdd_notice() is a redundant re-definition of hdd_info(), so remove it.
Replace existing usages with hdd_info() or hdd_debug() as appropriate.
Change-Id: Ie8ce7530c0118eff740975dcce396b68c2115429
CRs-Fixed: 2205815
Invoke green AP start/stop based on the current concurrency
and present state of green AP state machine.
Change-Id: I5648d236e6492f326c7ba9951da550e229352412
CRs-Fixed: 2173952
In order to better align with the rest of the driver, rename the
following macros:
* ENTER -> hdd_enter
* ENTER_DEV -> hdd_enter_dev
* EXIT -> hdd_exit
For part 1, introduce the new macros
Change-Id: I82fed51ed676041352acfeff20923c58ade4a826
CRs-Fixed: 2205830
Config ini item gEnableFwSelfRecovery is obsolete and no longer used
hence remove it.
Change-Id: I3b7f8662cb42f74d217dbdf3b2c3512176e2833e
CRs-Fixed: 2202033
While the driver is in FTM state, if a PDR is encountered
the driver is not allowed to recover.
Allow the recovery of the driver after PDR in FTM mode.
Change-Id: Ib4ee3970067a9fde5ba12d4dd954774a16ef0255
CRs-Fixed: 2181509
Change "qcacmn: Introduce new versions of TDLS peer callbacks"
(Change-Id Id4ea23266b0f3e1480b645c5afce6c17585ccb46 in project
qca-wifi-host-cmn) introduced a new interface which removed an unused
parameter and changed obsolete naming. Update qcacld-3.0 to use this
new interface.
Change-Id: I5c4684ac0a62f314da26f92ece2c9a9874d63634
CRs-Fixed: 2200993
Latest driver is not using "gFixedRate" INI anymore and this INI
is not doing any meaningful work, so remove it.
Change-Id: Icf7ef052a722f25c4338dd8086b14ce01c6176d8
CRs-Fixed: 2201799
Change "qcacld-3.0: Use Request Manager for ioctl getWlanStats"
removed the only user of item hdd_qdf_event in struct hdd_wext_state,
so completely remove it.
Change-Id: Ifc00f6dc396ca5f6e59b3895a6c9467179073218
CRs-Fixed: 2202506
The parameters to function hdd_roam_register_tdlssta() currently
includes ucastSig. This "signature" parameter dates back to a previous
version of the driver that used signatures to synchronize the data
plane with the control plane. However the current version of the
driver does not use this parameter, so remove it as part of the plan
to completely remove these signatures from throughout the driver.
Change-Id: Iee51d79e58501e3e8312c6c7a21b98c1ae6bf268
CRs-Fixed: 2200886
The parameters to function hdd_softap_register_sta() currently include
ucastSig and bcastSig. These "signature" parameters date back to a
previous version of the driver that used these signatures to
synchronize the data plane with the control plane. However the current
version of the driver does not use these parameters, so remove them as
part of the plan to completely remove these signatures from throughout
the driver.
Change-Id: I1f1f1fb1ef553d36ba0f4902ab29b2b4852ae5ca
CRs-Fixed: 2200356
Recent changes in Power Management and Offload (PMO) have removed the
need for a configurable maximum number of WoW filters. Remove the
following relevant fields:
* maxWoWFilters
* CFG_MAX_WOW_FILTERS_MAX
* WMA_STA_WOW_DEFAULT_PTRN_MAX
* max_wow_filters
* ol_ini_info
Change-Id: I99cc74731d6373258dc65473a8342bda0ab2786b
CRs-Fixed: 2199452
There are scenario where indoor channel operations
(like active / passive scan/connect/roam etc)
are not desired / permitted specially in sap case.
Hence add support of disabling indoor channel
on sap start and revert it on sap stop.
Change-Id: Id6e01534532e3076a3e662e6a4f71e8be924165a
CRs-fixed: 2121103
WoW is always enabled on ROME and ADRASTEA platforms and wow
wake up pattern configuration is dynamic based on vdev type.
All wow wake up patterns are configured at the time of vdev
creation. HDD and SME has obsolete wow enter and exit logic
and hence nuke it.
Change-Id: I228ff5b77a7f9dac579448ada4ebee591d5a0c38
CRs-Fixed: 2198644
Current driver posts the high and low Tx TPUT indications to cnss-daemon to
tune the tcp_limit_output_byte system parameter. Add option to disable it.
Change-Id: Ic65fe0bd762024425cabf2f1f07123211dce5dce
CRs-Fixed: 2197112
The checkpatch script has identified an instance of a non-conformant
block comment in wlan_hdd_main.h, so fix it.
Change-Id: Ie76156601021e2b5e503280337b38792217b7dbc
CRs-Fixed: 2197711
Set hw mode to DBS or single MAC for STA+STA and STA+P2P
concurrencies based on channel_select_logic_conc ini.
Change-Id: I46ba4d5cd8f5cda71d0c00be2b612bc851eb5ba4
CRs-Fixed: 2185554
Add ini to select DBS or inter-band MCC channel selection logic
for STA+STA and STA+P2P connections.
Change-Id: I7cfde9592ec210b0a8c812171d2bc6f005e17fb2
CRs-Fixed: 2185552
Change to collect arp packet stats along with
existing hdd stats to debug arp packet related
issues.
Change-Id: Idce70799bd3698dc8a8ecd8cfc8ef7d9bf1f5764
CRs-Fixed: 2019787
The Android Packet Filter (APF) is the preferred method for filtering
packets, but the legacy Packet Filter may also be used. In order to
encourage the use of APF over Packet Filter, disable Packet Filter by
default. Customers may still enable Packet Filter via setting
gDisablePacketFilter=0 via ini configuration.
Change-Id: I581a4001167571efbc7c1c1738c5585e4bde0611
CRs-Fixed: 2195111
After successful connection, if interface down(STA) happens on DUT
and if AP changes data rates before interface up happens, there
is a possibility of STA to send packets at older data rates, because
of holding older scan results in SME scan cache. This results in using
stale scan result even after wifi turn off and on. If stale scan result
is used and if AP has updated some params like rates DUT will not be
using those supported rates for tx which is an issue.
To mitigate this issue, flush scan results on STA interface down.
Also, make sure there are no other STA interfaces before flushing
scan results.
Change-Id: I3505c128276fa8e5e05ea5d9110eb75275a746e9
CRs-Fixed: 2171523
Add ini support to Enable/Disable chain selection optimization
for one chain dtim.
Change-Id: I95999a4204f2d978abc9951688332400b9670f0e
CRs-Fixed: 2189150
Currently, driver allows multiple acs scan requests at a time. Due to this
race conditions can occur and causes "use after free" issue for variable
channelList. To avoid race condition, driver should allow only one acs scan
request at a time.
Add a new atomic variable to make sure that if one acs scan request
is in process, the driver should reject all further acs scan requests.
Change-Id: I7aa2f4df0dd4c6ca8ff791fe462d142fc7b3e691
CRs-Fixed: 2176354
Reduce the minimum value for the ini nr_offload_cache_timeout to
5 seconds.
This is done to give the user a shorter cache_timeout to trigger
neighbor report frames more frequently.
Change-Id: Ica5359b9e826dad382868de991dcbf204c10a096
CRs-Fixed: 2189034
Change CFG_VHT_ENABLE_1x1_TX/RX_CHAINMASK_DEFAULT to 0 which
indicates to don't care setting.
Change-Id: Ic16a2eba471bdfb77ecc0329c67b36b65a3b3489
CRs-Fixed: 2184433
Currently driver created reg database instead of
db.txt for reg no-offload case.
Change-Id: Ia7853679532ad7536d34b4a4040feffb8566e907
CRs-Fixed: 2174245
Adding an ini for wmi workqueue watchdog, the ini value will
give the timeout value for wmi watchdog timer.
Change-Id: I6338351c8d788478307892152305e10186ead6cb
Logically, minimum value of gAutoChannelSelectWeight ini
should be 0 but as CFG_AUTO_CHANNEL_SELECT_WEIGHT_MIN is
defined as 0x1, when user assigns gAutoChannelSelectWeight
as 0 in ini file, it is not taking effect and default value
of 0xff gets assigned as 0 is out of bound of [min,max]
range.
Assign CFG_AUTO_CHANNEL_SELECT_WEIGHT_MIN as 0 instead of 1.
Change-Id: I025fd2af757ca1f169b6f1a155ee9f041398c6fa
CRs-Fixed: 2181422
Enabling SU beamformee in vendor vht IE gives good throughput in long
range while bad throughput in short range due to excessive sounding
action frames sent by APs.
So to give control to the user, add INI "enable_subfee_vendor_vhtie"
to enabled/disable the SU beamformee in vendor vht IE. It is
dependend on INI "gTxBFEnable" and if "gTxBFEnable" is set to 0
this will not have any effect and SU beam forming will always be
disabled.
Change-Id: Id67ea86d3e0a48fec8913d6254733f753dfdae8b
CRs-Fixed: 2178940
Add new ini options for 11k offload paramters and changes to pass down the
11k offload parameters to the FW. The 11k offload command is sent after
roam start to the FW in connect path.
Also add 11k invoke command support to offload neighbor report request
iwpriv command to FW
Change-Id: If6d4bff91531e5460bbc8a851a6d777cf088eda0
CRs-Fixed: 2162029
For the AP+AP SCC LTE-Coex case, when channel avoidance event
is reported, the channel switch request for SAP will be blocked
by policy manager if the target channel is different with the
operating channel of the existing SAP due to the SCC policy.
Need to update the logic to give higher priority to the channel
avoidance request.
Another change is to move the dfs_radar_found ref counter from
hdd_ctx to hdd_adapter so that the channel switch request of
the 2nd SAP will not be blocked when the 1st one is still in
progress since it might take some time to get VDEV restart
response from FW.
Change-Id: I8594b35b70276f7ed3884697caf69a99ee91b952
CRs-Fixed: 2171958
Add an ini parameter for GCMP support. Send an indication
to FW with the ini value.
Change-Id: Ib24747ddb35593373ecc83d6c7f89866571c2421
CRs-Fixed: 2175104
Add new config in INI for solicited BTM offload.
Those parameters will be sent to firmware.
New parameters:
* btm_solicited_timeout: Timeout value for waiting BTM request.
* btm_max_attempt_cnt: Maximum attempt for sending BTM query to ESS.
* btm_sticky_time: Stick time after roaming to new AP by BTM.
Change-Id: I24cc680bbfde3d44a57b1e1ccf644c2bed515a2c
CRs-Fixed: 2168981
Upon receiving a STA kick out event or a beacon miss event,
disable the Tx Queues immediately so that there is no influx
of packets anymore as the STA is going to disconnect further.
Change-Id: Ic6d7a3acbd8b90aec68771c1520359d39e0534db
CRs-Fixed: 2171633
