In STA mode, tx params for auth and assoc req frame
are not updated if minrate is 1 or 6Mbps as these
are the default rates for 2.4G and 5G respectively.
If 2.4G APs min supported rate is 6Mbps, the tx params
are not updated which results in auth and assoc req
frame transmitted at 1Mbps.
Fix is to update tx params if minrate is 6Mbps and
AP is operating in 2.4G.
Change-Id: Ia12c7b13cfb93e2d3b5a4ae124003248fa109e3f
CRs-Fixed: 2205282
Add new CONFIG_WLAN_OBJMGR_DEBUG flag in qcacld Kbuild for ObjMgr
Debug enhancements and use the flag to enable the existing
WLAN_OBJMGR_DEBUG CFlag.
Change-Id: I295c9b6822ab0c1396368ecc719b2ba1c8c834dd
CRs-Fixed: 2184785
The pktlog will be enabled when interface is up. Which might affect
the performance heavily. So do not enable it at the initialization
to avoid this side effect.
Change-Id: Ie03a7e0a77bc5f525ad7ae74bb104a6d1bf21eb7
CRs-Fixed: 2206216
In order to better align with the rest of the driver, rename the
following macros:
* ENTER -> hdd_enter
* ENTER_DEV -> hdd_enter_dev
* EXIT -> hdd_exit
For part 3, migrate usages of EXIT
Change-Id: I0868800b694c92d2ad157394d619c05f89dd222d
CRs-Fixed: 2205840
Fix 2 sub issues:
1. wlan_hdd_update_dbs_scan_and_fw_mode_config and
sme_soc_set_dual_mac_config is called in
hdd_wlan_start_modules->hdd_configure_cds->hdd_features_init,
before hdd_start_adapter, so vdev isn't created yet,
csr_queue_sme_command returned failed
Fixed by moving wlan_hdd_update_dbs_scan_and_fw_mode_config to
end of hdd_start_adapter
2. Rome doesn't support DBS, doesn't support cmd and wmi service
WMI_PDEV_SET_MAC_CONFIG_CMDID. so no response event for the cmd,
the cmd can't be removed from active list. so next cmd:
WMA_ADD_STA_SELF_REQ can't be executed at all, no complete event
for sme_open_session, hdd_init_station_mode failed
Fixed by checking whether support HW DBS before
sme_soc_set_dual_mac_config
Change-Id: Iec2ef7e77e91f332028904c319d24e1ed134306d
CRs-Fixed: 2202262
Some of wext public APIs are declared using extern storage
class specifier which is not needed hence clean up extern
keyword from wext public API declarations from wlan_hdd_wext.h
Change-Id: Ib1fe79a94b62bc457784340a7e930489fffe98f9
CRs-Fixed: 2202699
hdd_notice() is a redundant re-definition of hdd_info(), so remove it.
Replace existing usages with hdd_info() or hdd_debug() as appropriate.
Change-Id: Ie8ce7530c0118eff740975dcce396b68c2115429
CRs-Fixed: 2205815
Invoke green AP start/stop based on the current concurrency
and present state of green AP state machine.
Change-Id: I5648d236e6492f326c7ba9951da550e229352412
CRs-Fixed: 2173952
Change Ie062ada403f8a31aebcde691396987ad9e5352b5 introduced level-
specific logging wrappers to support compiling out entire levels of
logging messages. Enable these logging wrappers in the build config.
Change-Id: Ia866d28d1581f2baa69967a9c342da5a5432ef62
CRs-Fixed: 2205917
The hdd_* logging wrappers already inject the calling function and line
number information, but several consumers are wrapping the format string
in a call to FL, which does the same thing. Remove redundant calls to FL
in HDD.
Change-Id: Ieb3e54f707579296fbfdbce74496800cf14ecd0a
CRs-Fixed: 2205912
In order to better align with the rest of the driver, rename the
following macros:
* ENTER -> hdd_enter
* ENTER_DEV -> hdd_enter_dev
* EXIT -> hdd_exit
For part 4, migrate usages of ENTER_DEV
Change-Id: I53628486c9acf5c444c2a97c40ab02324e9a00d7
CRs-Fixed: 2205843
Do not send phyerr filter offload to FW when dfs module is doing
initialization, because in target_if_dfs_set_phyerr_filter_offload
routine GET_WMI_HDL_FROM_PDEV returns NULL at this time.
Configure phyerr filter offload before sap starts.
Change-Id: I60436fc1e142937383a3714c727166bc5fa8d0db
CRs-Fixed: 2205229
The params are passed individually as argument in wmi_unified_attach.
Instead of individual params, use a struct for wmi attach params.
Also pass max commands as param in wmi attach.
CRs-Fixed: 2192801
Change-Id: I28d5985655b436da048d72d33fe0fb4f57e85a50
In order to better align with the rest of the driver, rename the
following macros:
* ENTER -> hdd_enter
* ENTER_DEV -> hdd_enter_dev
* EXIT -> hdd_exit
For part 1, introduce the new macros
Change-Id: I82fed51ed676041352acfeff20923c58ade4a826
CRs-Fixed: 2205830
Debug fs create failure should not fail wifi turn on. Add logic
to allow wifi turn on even if kernel debug fs create API returns
failure.
Change-Id: I02ce1ae4022f6590b29b8666bbe39c7387e8d0dd
CRs-Fixed: 2203329
Qcacld supports multiple driver modules instance generation with
different file names and Kbuild options. Fix driver load time and
compilation errors on this feature.
Change-Id: Ib405e6c475bace31933a28dc64082f2b6c046da9
CRs-fixed: 2197749
Register fw down callback with QDF such that new UMAC
components can check if FW is down or not.
Change-Id: I394860324368d7671f83536791b021109ddb39aa
CRs-Fixed: 2202602
Config ini item gEnableFwSelfRecovery is obsolete and no longer used
hence remove it.
Change-Id: I3b7f8662cb42f74d217dbdf3b2c3512176e2833e
CRs-Fixed: 2202033
When the channel list contains only 2.4Ghz channels and
bandwidth is coming as 80Mhz in __wlan_hdd_cfg80211_do_acs(),
max weight gets assigned to all the channels irrespective of
scan results and channel 1 gets selected in the end.
Downgrade bandwidth to 40Mhz if channel list contains only 2.4Ghz
channels and bandwidth is coming as 80Mhz.
Change-Id: I0e54b5db0020768c219acc0d864e72813c9185e9
CRs-Fixed: 2193438
While the driver is in FTM state, if a PDR is encountered
the driver is not allowed to recover.
Allow the recovery of the driver after PDR in FTM mode.
Change-Id: Ib4ee3970067a9fde5ba12d4dd954774a16ef0255
CRs-Fixed: 2181509
Currenty we are trying to access the ol_rx_thread in
ds_cpu_hotplug_notify function after we shut the thread
down in cds_sched_close function
To address the issue keep a NULL check for the ol_rx_thread
Change-Id: Icddd3ace52bbe773790546d1ace1fd463bc1a7e7
CRs-Fixed: 2200501
qcacld-2.0 to qcacld-3.0 Propagation.
Revert the changes of Validating NLA attr in
wlan_hdd_cfg80211_ocb_set_config API to fix the
dsrc_config fail issue.
CRs-Fixed: 2109727
Change-Id: I5037498a510820a86cba9e61149640a957b46086
In the function wma_passpoint_match_event_handler, fixed param event data
from firmware is filled in the destination buffer and indication is sent
to upper layers. The buffer allocation is done for the size
(wmi_passpoint_event_hdr*) + event->ie_length + event->anqp_length. The
maximum firmware event message size is WMI_SVC_MSG_MAX_SIZE. If either,
ie_length and anqp_length combined is greater than WMI_SVC_MSG_MAX_SIZE or
either of the two exceeds WMI_SVC_MSG_MAC_SIZE, an OOB write will occur in
wma_passpoint_match_event_handler.
Add check to ensure either of the values ie_length or anqp_lenth or
(ie_length + anqp_length) doesnt exceed the WMI_SVC_MAX_SIZE. Return
failure if it exceeds.
Change-Id: I21f473ca0b99ebb8488f2cca3c0774817ea97c3a
CRs-Fixed: 2201190
Randomize bss color within 1 to 63 When hostapd.conf does not specifies
bss color parameter.
Change-Id: I5650d15836e19bd0efc226f86b22a8697e45c59e
CRs-Fixed: 2200411
Set the default addba buffer size to 64 and advertise the default
value in addba response frame.
Change-Id: I8eec73c0907b42414bc742ae01b921b9e4e5b6d5
CRs-Fixed: 2204110
The ucastSig and bcastSig fields in tSirTdlsAddStaRsp date back
to a previous version of the driver that used these signatures to
synchronize the data plane with the control plane. However the current
version of the driver does not use these parameters, so remove them as
the final stage of the plan to completely remove these signatures from
throughout the driver.
Since the legacy tSirTdlsAddStaRsp data structure must exactly match
the converged struct tdls_add_sta_rsp, this change is co-dependent
with the qca-wifi-host-cmn change:
qcacmn: Remove DPU signatures from TDLS Add STA Response
Change-Id: I7750fac9e4870d75358606bea427a5dbab97c665
Change-Id: I765b090fc5dbe9bdaf83b05a72223c0a12f71a18
CRs-Fixed: 2200996
In a previous version of the driver both unicast and broadcast DPU
signatures were used to synchronize the data plane with the control
plane. However the current version of the driver does not use this
synchronization mechanism, so remove propagation of the DPU signatures
from the UMAC. This is part of the plan to completely remove these
signatures from throughout the driver.
Change-Id: I6a1808d0905bb0c4550b16cf2b2157a529caa9e9
CRs-Fixed: 2200997
In a prior version of the driver DPU signatures were used to
synchronize the Data Plane with the Control Plane. The DPU signatures
were provided to HDD by SME via fields in struct csr_roam_info, and
then HDD provided the fields to the Data Plane. But that mechanism is
no longer used and HDD does not read these fields so remove them along
with the logic that is currently used to fill them.
Change-Id: Ib056c20683e6b4f0d969fcff227476d53e040cc0
CRs-Fixed: 2200995
Currently, hdd_reset_all_adapters will set hdd_reassoc_scenario
as "false" no matter what adapter's dev mode. It may pollute the
session.ap's content.
Change-Id: I339982e5454d7ef5bd4325b0901c4a81ceed6ab9
CRs-Fixed: 2201535
Change "qcacmn: Remove obsolete TDLS peer callback interface"
(Change-Id I32bb1f633b1dd1514aa6e4c3fdea044b3bca0009 in project
qca-wifi-host-cmn) has complete removed the old TDLS peer callbacks;
the new callbacks are the only ones supported. Therefore remove the
usage of USE_NEW_TDLS_PEER_CALLBACKS which was previously being used
to select the new callbacks.
Change-Id: I6b82b563e060727dfd02bfea40e4439ea09d7f75
CRs-Fixed: 2200994
