Commit Graph

55901 Commits

Author SHA1 Message Date
Yasuyuki Kozakai
ba4c7cbadd [NETFILTER]: nf_nat: remove unused argument of function allocating binding
nf_nat_rule_find, alloc_null_binding and alloc_null_binding_confirmed
do not use the argument 'info', which is actually ct->nat.info.
If they are necessary to access it again, we can use the argument 'ct'
instead.

Signed-off-by: Yasuyuki Kozakai <yasuyuki.kozakai@toshiba.co.jp>
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-05-10 23:47:44 -07:00
Patrick McHardy
3c2ad469c3 [NETFILTER]: Clean up table initialization
- move arp_tables initial table structure definitions to arp_tables.h
  similar to ip_tables and ip6_tables

- use C99 initializers

- use initializer macros where possible

Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-05-10 23:47:43 -07:00
Herbert Xu
41a23b0788 [NET_SCHED]: Avoid requeue warning on dev_deactivate
When we relinquish queue_lock in qdisc_restart and then retake it for
requeueing, we might race against dev_deactivate and end up requeueing
onto noop_qdisc.  This causes a warning to be printed.

This patch fixes this by checking this before we requeue.  As an added
bonus, we can remove the same check in __qdisc_run which was added to
prevent dev->gso_skb from being requeued when we're shutting down.

Even though we've had to add a new conditional in its place, it's better
because it only happens on requeues rather than every single time that
qdisc_run is called.

For this to work we also need to move the clearing of gso_skb up in
dev_deactivate as now qdisc_restart can occur even after we wait for
__LINK_STATE_QDISC_RUNNING to clear (but it won't do anything as long
as the queue and gso_skb is already clear).

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-05-10 23:47:42 -07:00
Herbert Xu
cce1fa36a8 [NET_SCHED]: Reread dev->qdisc for NETDEV_TX_OK
Now that we return the queue length after NETDEV_TX_OK we better
make sure that we have the right queue.  Otherwise we can cause a
stall after a really quick dev_deactive/dev_activate.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-05-10 23:47:41 -07:00
Herbert Xu
d90df3ad07 [NET_SCHED]: Rationalise return value of qdisc_restart
The current return value scheme and associated comment was invented
back in the 20th century when we still had that tbusy flag.  Things
have changed quite a bit since then (even Tony Blair is moving on
now, not to mention the new French president).

All we need to indicate now is whether the caller should continue
processing the queue.  Therefore it's sufficient if we return 0 if
we want to stop and non-zero otherwise.

This is based on a patch by Krishna Kumar.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-05-10 23:47:40 -07:00
Thomas Graf
5830725f8a [NET]: Fix dev->qdisc race for NETDEV_TX_LOCKED case
When transmit fails with NETDEV_TX_LOCKED the skb is requeued
to dev->qdisc again. The dev->qdisc pointer is protected by
the queue lock which needs to be dropped when attempting to
transmit and acquired again before requeing. The problem is
that qdisc_restart() fetches the dev->qdisc pointer once and
stores it in the `q' variable which is invalidated when
dropping the queue_lock, therefore the variable needs to be
refreshed before requeueing.

Signed-off-by: Thomas Graf <tgraf@suug.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-05-10 23:47:39 -07:00
David S. Miller
fc038410b4 [UDP]: Fix AF-specific references in AF-agnostic code.
__udp_lib_port_inuse() cannot make direct references to
inet_sk(sk)->rcv_saddr as that is ipv4 specific state and
this code is used by ipv6 too.

Use an operations vector to solve this, and this also paves
the way for ipv6 support for non-wild saddr hashing in UDP.

Signed-off-by: David S. Miller <davem@davemloft.net>
2007-05-10 23:47:22 -07:00
Alex Villac�s Lasso
a2af421f18 [IrDA]: KingSun/DonShine USB IrDA dongle support.
This dongle does not follow the usb-irda specification, so it needs its
own special driver. In addition, it uses interrupt endpoints instead of
bulk ones as the rest of USB IrDA dongles supported by Linux (just to be
different?) and data reads need to be parsed to extract the valid bytes
before being unwrapped (details in the comment at the start of the
source). No speed commands have been discovered for this dongle, and I
suspect it does not have any at all.

On plugin, this dongle reports vendor and device IDs: 0x07c0:0x4200 .

The Windows driver that is used normally to control this dongle has a
filename of DSIR620.SYS .

Signed-off-by: Alex Villac�s Lasso <a_villacis@palosanto.com>
Signed-off-by: Samuel Ortiz <samuel@sortiz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-05-10 23:46:13 -07:00
YOSHIFUJI Hideaki
9a6bf6fe71 [IPV6] ROUTE: Assign rt6i_idev for ip6_{prohibit,blk_hole}_entry.
I think this is less critical, but is also suitable for -stable
release.

Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-05-10 23:46:12 -07:00
YOSHIFUJI Hideaki
e76b2b2567 [IPV6]: Do no rely on skb->dst before it is assigned.
Because skb->dst is assigned in ip6_route_input(), it is really
bad to use it in hop-by-hop option handler(s).

Closes: Bug #8450 (Eric Sesterhenn <snakebyte@gmx.de>)
Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-05-10 23:45:58 -07:00
David L Stevens
5bb1ab09e4 [IPV6]: Send ICMPv6 error on scope violations.
When an IPv6 router is forwarding a packet with a link-local scope source
address off-link, RFC 4007 requires it to send an ICMPv6 destination
unreachable with code 2 ("not neighbor"), but Linux doesn't. Fix below.

Signed-off-by: David L Stevens <dlstevens@us.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-05-10 23:45:32 -07:00
Vlad Yasevich
ac40e41f4d [SCTP]: Do not include ABORT chunk header in the notification.
The socket API draft is unclear about whether to include the
chunk header or not.  Recent discussion on the sctp implementors
mailing list clarified that the chunk header shouldn't be included,
but the error parameter header still needs to be there.

Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-05-10 23:45:31 -07:00
Vlad Yasevich
70b57b814e [SCTP]: Correctly copy addresses in sctp_copy_laddrs
I broke the  non-wildcard case recently.  This is to fixes it.
Now, explictitly bound addresses can ge retrieved using the API.

Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-05-10 23:45:30 -07:00
Vlad Yasevich
8dc4984a6b [SCTP]: Prevent OOPS if hmac modules didn't load
SCTP was checking for NULL when trying to detect hmac
allocation failure where it should have been using IS_ERR.
Also, print a rate limited warning to the log telling the
user what happend.

Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-05-10 23:45:29 -07:00
Herbert Xu
d9568ba91b [NET] link_watch: Always schedule urgent events
Urgent events may be delayed if we already have a non-urgent event
queued for that device.  This patch changes this by making sure that
an urgent event is always looked at immediately.

I've replaced the LW_RUNNING flag by LW_URGENT since whether work
is scheduled is already kept track by the work queue system.

The only complication is that we have to provide some exclusion for
the setting linkwatch_nextevent which is available in the actual
work function.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-05-10 23:45:28 -07:00
Herbert Xu
db0ccffed9 [NET] link_watch: Eliminate potential delay on wrap-around
When the jiffies wrap around or when the system boots up for the first
time, down events can be delayed indefinitely since we no longer
update linkwatch_nextevent when only urgent events are processed.

This patch fixes this by setting linkwatch_nextevent when a
wrap-around occurs.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-05-10 23:45:11 -07:00
Krishna Kumar
4cd8c9e87b [NET_SCHED]: teql_enqueue can check limits before skb enqueue
Optimize teql_enqueue so that it first checks limits before enqueing.

Signed-off-by: Krishna Kumar <krkumar2@in.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-05-10 23:45:10 -07:00
Geert Uytterhoeven
5b323edbf9 [MAC80211]: include <linux/delay.h> instead of <asm/delay.h>
|   CC      net/mac80211/ieee80211_sta.o
| In file included from linux/net/mac80211/ieee80211_sta.c:31:
| include2/asm/delay.h: In function '__const_udelay':
| include2/asm/delay.h:33: error: 'loops_per_jiffy' undeclared (first use in this function)
| include2/asm/delay.h:33: error: (Each undeclared identifier is reported only once
| include2/asm/delay.h:33: error: for each function it appears in.)

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-05-10 23:45:09 -07:00
Herbert Xu
294cc44b7e [NET]: Remove link_watch delay for up even when we're down
Currently all link carrier events are delayed by up to a second
before they're processed to prevent link storms.  This causes
unnecessary packet loss during that interval.

In fact, we can achieve the same effect in preventing storms by
only delaying down events and unnecssary up events.  The latter
is defined as up events when we're already up.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-05-10 23:45:08 -07:00
Herbert Xu
572a103ded [NET] link_watch: Move link watch list into net_device
These days the link watch mechanism is an integral part of the
network subsystem as it manages the carrier status.  So it now
makes sense to allocate some memory for it in net_device rather
than allocating it on demand.

In fact, this is necessary because we can't tolerate a memory
allocation failure since that means we'd have to potentially
throw a link up event away.

It also simplifies the code greatly.

In doing so I discovered a subtle race condition in the use
of singleevent.  This race condition still exists (and is
somewhat magnified) without singleevent but it's now plugged
thanks to an smp_mb__before_clear_bit.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-05-10 23:45:07 -07:00
Marcel Holtmann
c33be3c362 [Bluetooth] Fix unintentional fall-through in HCI line discipline
A trivial fix to (what looks like) an unintentional fall-through in the
HCI line discipline.

Signed-off-by: Ohad Ben-Cohen <ohad@bencohen.org>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-05-10 23:45:06 -07:00
Marcel Holtmann
22ad42033b [Bluetooth] Fix NULL pointer dereference in HCI line discipline
Normally a serial Bluetooth device is opened, TIOSETD'ed to N_HCI line
discipline, HCIUARTSETPROTO'ed and finally closed. In case the device
fails to HCIUARTSETPROTO, closing it produces a NULL pointer dereference.

Signed-off-by: Ohad Ben-Cohen <ohad@bencohen.org>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-05-10 23:45:05 -07:00
Marcel Holtmann
d215874460 [Bluetooth] Add HCIUARTGETDEVICE support for HCI line discipline
Adding HCIUARTGETDEVICE makes it possible to get the HCI device number
that is attached to a given serial device. This is required during the
initialization process of some Bluetooth chips.

Signed-off-by: Ohad Ben-Cohen <ohad@bencohen.org>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-05-10 23:45:04 -07:00
Marcel Holtmann
5be3946647 [Bluetooth] Switch to using input_dev->dev.parent
In preparation for struct class_device -> struct device input core
conversion, switch to using input_dev->dev.parent when specifying
device position in sysfs tree.

Also, do not access input_dev->private directly, use helpers and
do not use kfree() on input device, use input_free_device() instead.

Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-05-10 23:45:03 -07:00
J. Bruce Fields
129a84de23 locks: fix F_GETLK regression (failure to find conflicts)
In 9d6a8c5c21 we changed posix_test_lock
to modify its single file_lock argument instead of taking separate input
and output arguments.  This makes it no longer safe to set the output
lock's fl_type to F_UNLCK before looking for a conflict, since that
means searching for a conflict against a lock with type F_UNLCK.

This fixes a regression which causes F_GETLK to incorrectly report no
conflict on most filesystems (including any filesystem that doesn't do
its own locking).

Also fix posix_lock_to_flock() to copy the lock type.  This isn't
strictly necessary, since the caller already does this; but it seems
less likely to cause confusion in the future.

Thanks to Doug Chapman for the bug report.

Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
Acked-by: Doug Chapman <doug.chapman@hp.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-10 20:25:59 -07:00
Linus Torvalds
a9deecba19 Merge master.kernel.org:/pub/scm/linux/kernel/git/wim/linux-2.6-watchdog
* master.kernel.org:/pub/scm/linux/kernel/git/wim/linux-2.6-watchdog:
  [WATCHDOG] MTX-1 Watchdog driver
  [WATCHDOG] s3c2410_wdt - initialize watchdog irq resource  
  [WATCHDOG] Kconfig menuconfig patch
  [WATCHDOG] pcwd.c: Port to the new device driver model
  [WATCHDOG] use mutex instead of semaphore in Berkshire USB-PC Watchdog driver
  [WATCHDOG] the scheduled removal of the i8xx_tco watchdog driver
  [WATCHDOG] Semi-typical watchdog bug re early misc_register()
  [WATCHDOG] add support for the w83627thf chipset.
2007-05-10 14:33:03 -07:00
Simon Horman
d9de2622bd Allow compat_ioctl.c to compile without CONFIG_NET
A small regression appears to have been introduced in the recent patch
"cleanup compat ioctl handling", which was included in Linus' tree after
2.6.20.

siocdevprivate_ioctl() is no longer defined if CONFIG_NET is undefined,
whereas previously it was a dummy function in this case.

This causes compilation with CONFIG_COMPAT but without CONFIG_NET to fail.

fs/compat_ioctl.c: In function `compat_sys_ioctl':
fs/compat_ioctl.c:3571: warning: implicit declaration of function `siocdevprivate_ioctl'

Cc: Christoph Hellwig <hch@lst.de>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Cc: Andi Kleen <ak@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-10 13:34:05 -07:00
Frederik Deweerdt
643bd27298 Fix ixp4xx compile error
drivers/input/misc/ixp4xx-beeper.c: In function 'ixp4xx_spkr_event':
drivers/input/misc/ixp4xx-beeper.c:54: error: 'input_dev' undeclared (first use in this function)
drivers/input/misc/ixp4xx-beeper.c:54: error: (Each undeclared identifier is reported only once
drivers/input/misc/ixp4xx-beeper.c:54: error: for each function it appears in.)

Signed-off-by: Frederik Deweerdt <frederik.deweerdt@gmail.com>
Acked-by: Dmitry Torokhov <dtor@mail.ru>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-10 13:34:05 -07:00
Linus Torvalds
62933d36ac Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc
* 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc: (24 commits)
  [POWERPC] Fix compile error with kexec and CONFIG_SMP=n
  [POWERPC] Split initrd logic out of early_init_dt_scan_chosen() to fix warning
  [POWERPC] Fix warning in hpte_decode(), and generalize it
  [POWERPC] Minor pSeries IOMMU debug cleanup
  [POWERPC] PS3: Fix sys manager build error
  [POWERPC] Assorted janitorial EEH cleanups
  [POWERPC] We don't define CONFIG_HAVE_ARCH_EARLY_PFN_TO_NID
  [POWERPC] pmu_sys_suspended is only defined for PPC32
  [POWERPC] Fix incorrect calculation of I/O window addresses
  [POWERPC] celleb: Update celleb_defconfig
  [POWERPC] celleb: Fix parsing of machine type hack command line option
  [POWERPC] celleb: Fix PCI config space accesses to subordinate buses
  [POWERPC] celleb: Fix support for multiple PCI domains
  [POWERPC] Wire up sys_utimensat
  [POWERPC] CPM_UART: Removed __init from cpm_uart_init_portdesc to fix warning
  [POWERPC] User rheap from arch/powerpc/lib
  [POWERPC] 83xx: Fix the PCI ranges in the MPC834x_MDS device tree.
  [POWERPC] 83xx: Fix the PCI ranges in the MPC832x_MDS device tree.
  [POWERPC] CPM_UART: cpm_uart_set_termios should take ktermios, not termios
  [POWERPC] Change rheap functions to use ulongs instead of pointers
  ...
2007-05-10 13:32:24 -07:00
Linus Torvalds
0ab598099c Merge master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6
* master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6:
  [SPARC64]: Use alloc_pci_dev() in PCI bus probes.
  [SPARC64]: Bump PROMINTR_MAX to 32.
  [SPARC64]: Fix recursion in PROM tree building.
  [SERIAL] sunzilog: Interrupt enable before ISR handler installed
  [SPARC64] PCI: Consolidate PCI access code into pci_common.c
2007-05-10 13:32:05 -07:00
Linus Torvalds
b526ca438b Merge branch 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6
* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6:
  acpi,msi-laptop: Fall back to EC polling mode for MSI laptop specific EC commands
  sony-laptop: rename SONY_LAPTOP_OLD to a more meaningful SONYPI_COMPAT
  asus-laptop: version bump and lindent
  asus-laptop: fix light sens init
  asus-laptop: add GPS support
  asus-laptop: notify ALL events
  ACPICA: Lindent
  ACPI: created a dedicated workqueue for notify() execution
  Revert "ACPICA: fix AML mutex re-entrancy"
  Revert "Execute AML Notify() requests on stack."
  Revert "ACPICA: revert "acpi_serialize" changes"
  ACPI: delete un-reliable concept of cooling mode
  ACPI: thermal trip points are read-only
2007-05-10 13:30:34 -07:00
Linus Torvalds
9b6a51746f Merge branch 'juju' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6
* 'juju' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6: (138 commits)
  firewire: Convert OHCI driver to use standard goto unwinding for error handling.
  firewire: Always use parens with sizeof.
  firewire: Drop single buffer request support.
  firewire: Add a comment to describe why we split the sg list.
  firewire: Return SCSI_MLQUEUE_HOST_BUSY for out of memory cases in queuecommand.
  firewire: Handle the last few DMA mapping error cases.
  firewire: Allocate scsi_host up front and allocate the sbp2_device as hostdata.
  firewire: Provide module aliase for backwards compatibility.
  firewire: Add to fw-core-y instead of assigning fw-core-objs in Makefile.
  firewire: Break out shared IEEE1394 constant to separate header file.
  firewire: Use linux/*.h instead of asm/*.h header files.
  firewire: Uppercase most macro names.
  firewire: Coding style cleanup: no spaces after function names.
  firewire: Convert card_rwsem to a regular mutex.
  firewire: Clean up comment style.
  firewire: Use lib/ implementation of CRC ITU-T.
  CRC ITU-T V.41
  firewire: Rename fw-device-cdev.c to fw-cdev.c and move header to include/linux.
  firewire: Future proof the iso ioctls by adding a handle for the iso context.
  firewire: Add read/write and size annotations to IOC numbers.
  ...

Acked-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-10 13:30:08 -07:00
Linus Torvalds
fc0b60f1dc Merge branch 'for-linus' of git://git390.osdl.marist.edu/pub/scm/linux-2.6
* 'for-linus' of git://git390.osdl.marist.edu/pub/scm/linux-2.6:
  [S390] update default configuration.
  [S390] Kconfig: no wireless on s390.
  [S390] Kconfig: use common Kconfig files for s390.
  [S390] Kconfig: common config options for s390.
  [S390] Kconfig: unwanted menus for s390.
  [S390] Kconfig: menus with depends on HAS_IOMEM.
  [S390] Kconfig: refine depends statements.
  [S390] Avoid compile warning.
  [S390] qdio: re-add lost perf_stats.tl_runs change in qdio_handle_pci
  [S390] Avoid sparse warnings.
  [S390] dasd: Fix modular build.
  [S390] monreader inlining cleanup.
  [S390] cio: Make some structures and a function static.
  [S390] cio: Get rid of _ccw_device_get_device_number().
  [S390] fix subsystem removal fallout
2007-05-10 11:50:51 -07:00
akpm@linux-foundation.org
e9910846fd timer: revert parenthesis fix in tbase_get_deferrable() etc
On 09-05-2007 21:10, Pallipadi, Venkatesh wrote:
...
> On a 64 bit system, converting pointer to int causes unnecessary
> compiler warning, and intermediate long conversion was to avoid that.
> I will have to rephrase my comment to remove 32 bit value and use int,
> as that is what the function returns.

So, this patch reverts all changes done by my previous patch.

I apologize for my wrong comment about "logical error" here.

Cc: "Pallipadi, Venkatesh" <venkatesh.pallipadi@intel.com>
Cc: Satyam Sharma <satyam.sharma@gmail.com>
Cc: Oleg Nesterov <oleg@tv-sign.ru>
Signed-off-by: Jarek Poplawski <jarkao2@o2.pl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-10 09:26:53 -07:00
Alexey Dobriyan
c91e23c63f i2c-at91: compile fix (IS_ERR)
CC      drivers/i2c/busses/i2c-at91.o
drivers/i2c/busses/i2c-at91.c: In function 'at91_i2c_probe':
drivers/i2c/busses/i2c-at91.c:213: warning: implicit declaration of function 'IS_ERR'

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Cc: David Brownell <david-b@pacbell.net>
Acked-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-10 09:26:53 -07:00
David Brownell
6e99806ebb i2c-at91 supports new-style i2c drivers
Make i2c-at91 register as i2c adapter zero (none of these chips seem to
have more than one TWI controllers) to let it kick in any board-specific
device declarations; also make it hotplug/coldplug.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Acked-by: Jean Delvare <khali@linux-fr.org>
Cc: Andrew Victor <andrew@sanpeople.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-10 09:26:53 -07:00
NeilBrown
dd00a99e7a md: avoid a possibility that a read error can wrongly propagate through md/raid1 to a filesystem.
When a raid1 has only one working drive, we want read error to propagate up
to the filesystem as there is no point failing the last drive in an array.

Currently the code perform this check is racy.  If a write and a read a
both submitted to a device on a 2-drive raid1, and the write fails followed
by the read failing, the read will see that there is only one working drive
and will pass the failure up, even though the one working drive is actually
the *other* one.

So, tighten up the locking.

Signed-off-by: Neil Brown <neilb@suse.de>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-10 09:26:53 -07:00
Dmitry Torokhov
c5ddb547e8 drivers/hwmon: switch to using input_dev->dev.parent
In preparation for struct class_device -> struct device input core
conversion, switch to using input_dev->dev.parent when specifying device
position in sysfs tree.

Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Acked-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-10 09:26:53 -07:00
Christoph Lameter
bcf889f965 SLUB: remove nr_cpu_ids hack
This was in SLUB in order to head off trouble while the nr_cpu_ids
functionality was not merged.  Its merged now so no need to still have this.

Signed-off-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-10 09:26:53 -07:00
Christoph Lameter
d4751a2797 SLUB: SLUB_DEBUG must depend on SLUB
Otherwise people get asked about SLUB_DEBUG even if they have another
slab allocator enabled.

Signed-off-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-10 09:26:53 -07:00
Eric W. Biederman
5a18c92aab Revert "[PATCH] paravirt: Add startup infrastructure for paravirtualization"
This reverts commit c9ccf30d77.

Entering the kernel at startup_32 without passing our real mode data in
%esi, and without guaranteeing that physical and virtual addresses are
identity mapped makes head.S impossible to maintain.

The only user of this infrastructure is lguest which is not merged so
nothing we currently support will break by removing this over designed
nightmare, and only the pending lguest patches will be affected.  The
pending Xen patches have a different entry point that they use.

We are currently discussing what Xen and lguest need to do to boot the
kernel in a more normal fashion so using startup_32 in this weird manner is
clearly not their long term direction.

So let's remove this code in head.S before it causes brain damage to people
trying to maintain head.S

Cc: Chris Wright <chrisw@sous-sol.org>
Cc: Andi Kleen <ak@suse.de>
Cc: Jeremy Fitzhardinge <jeremy@goop.org>
Cc: Zachary Amsden <zach@vmware.com>
CC: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-10 09:26:53 -07:00
Russell King
0cfe61e1a7 arm: fix i2c-pxa build
From commit 7d054817b7:
> According to the PXA27x developer's manual, we shall do so.

We shall also at least compile test our changes.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Cc: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-10 09:26:52 -07:00
Randy Dunlap
c4a7f5eb5f ocfs2: kobject/kset foobar
Fix gcc warning and Oops that it causes:

fs/ocfs2/cluster/masklog.c:161: warning: assignment from incompatible pointer type
[ 2776.204120] OCFS2 Node Manager 1.3.3
[ 2776.211729] BUG: spinlock bad magic on CPU#0, modprobe/4424
[ 2776.214269]  lock: ffff810021c8fe18, .magic: ffffffff, .owner: /6394416, .owner_cpu: 0
[ 2776.217864] [ 2776.217865] Call Trace:
[ 2776.219662]  [<ffffffff803426c8>] spin_bug+0x9e/0xe9
[ 2776.221921]  [<ffffffff803427bf>] _raw_spin_lock+0x23/0xf9
[ 2776.224417]  [<ffffffff8051acf4>] _spin_lock+0x9/0xb
[ 2776.226676]  [<ffffffff8033c3b1>] kobject_shadow_add+0x98/0x1ac
[ 2776.229367]  [<ffffffff8033c4d0>] kobject_add+0xb/0xd
[ 2776.231665]  [<ffffffff8033c4df>] kset_add+0xd/0xf
[ 2776.233845]  [<ffffffff8033c5a6>] kset_register+0x23/0x28
[ 2776.236309]  [<ffffffff8808ccb7>] :ocfs2_nodemanager:mlog_sys_init+0x68/0x6d
[ 2776.239518]  [<ffffffff8808ccee>] :ocfs2_nodemanager:o2cb_sys_init+0x32/0x4a
[ 2776.242726]  [<ffffffff880b80a6>] :ocfs2_nodemanager:init_o2nm+0xa6/0xd5
[ 2776.245772]  [<ffffffff8025266c>] sys_init_module+0x1471/0x15d2
[ 2776.248465]  [<ffffffff8033f250>] simple_strtoull+0x0/0xdc
[ 2776.250959]  [<ffffffff8020948e>] system_call+0x7e/0x83

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Acked-by: Mark Fasheh <mark.fasheh@oracle.com>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-10 09:26:52 -07:00
Stephen Rothwell
6f076f5dd9 early_pfn_to_nid needs to be __meminit
Since it is referenced by memmap_init_zone (which is __meminit) via the
early_pfn_in_nid macro when CONFIG_NODES_SPAN_OTHER_NODES is set (which
basically means PowerPC 64).

This removes a section mismatch warning in those circumstances.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Yasunori Goto <y-goto@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-10 09:26:52 -07:00
David Howells
a6a62b69b9 AF_RXRPC: reduce debugging noise
Reduce debugging noise generated by AF_RXRPC.

Signed-off-by: David Howells <dhowells@redhat.com>
Cc: "David S. Miller" <davem@davemloft.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-10 09:26:52 -07:00
David Howells
5bbf5d39f8 AFS: further write support fixes
Further fixes for AFS write support:

 (1) The afs_send_pages() outer loop must do an extra iteration if it ends
     with 'first == last' because 'last' is inclusive in the page set
     otherwise it fails to send the last page and complete the RxRPC op under
     some circumstances.

 (2) Similarly, the outer loop in afs_pages_written_back() must also do an
     extra iteration if it ends with 'first == last', otherwise it fails to
     clear PG_writeback on the last page under some circumstances.

Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-10 09:26:52 -07:00
David Howells
b9b1f8d593 AFS: write support fixes
AFS write support fixes:

 (1) Support large files using the 64-bit file access operations if available
     on the server.

 (2) Use kmap_atomic() rather than kmap() in afs_prepare_page().

 (3) Don't do stuff in afs_writepage() that's done by the caller.

[akpm@linux-foundation.org: fix right shift count >= width of type]
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-10 09:26:52 -07:00
Andrew Morton
218e180e7e add upper-32-bits macro
We keep on getting "right shift count >= width of type" warnings when doing
things like

	sector_t s;

	x = s >> 56;

because with CONFIG_LBD=n, s is only 32-bit.  Similar problems can occur with
dma_addr_t's.

So add a simple wrapper function which code can use to avoid this warning.
The above example would become

	x = upper_32_bits(s) >> 24;

The first user is in fact AFS.

Cc: James Bottomley <James.Bottomley@SteelEye.com>
Cc: "Cameron, Steve" <Steve.Cameron@hp.com>
Cc: "Miller, Mike (OS Dev)" <Mike.Miller@hp.com>
Cc: Hisashi Hifumi <hifumi.hisashi@oss.ntt.co.jp>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: David Howells <dhowells@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-10 09:26:52 -07:00
Christoph Lameter
894b8788d7 slub: support concurrent local and remote frees and allocs on a slab
Avoid atomic overhead in slab_alloc and slab_free

SLUB needs to use the slab_lock for the per cpu slabs to synchronize with
potential kfree operations.  This patch avoids that need by moving all free
objects onto a lockless_freelist.  The regular freelist continues to exist
and will be used to free objects.  So while we consume the
lockless_freelist the regular freelist may build up objects.

If we are out of objects on the lockless_freelist then we may check the
regular freelist.  If it has objects then we move those over to the
lockless_freelist and do this again.  There is a significant savings in
terms of atomic operations that have to be performed.

We can even free directly to the lockless_freelist if we know that we are
running on the same processor.  So this speeds up short lived objects.
They may be allocated and freed without taking the slab_lock.  This is
particular good for netperf.

In order to maximize the effect of the new faster hotpath we extract the
hottest performance pieces into inlined functions.  These are then inlined
into kmem_cache_alloc and kmem_cache_free.  So hotpath allocation and
freeing no longer requires a subroutine call within SLUB.

[I am not sure that it is worth doing this because it changes the easy to
read structure of slub just to reduce atomic ops.  However, there is
someone out there with a benchmark on 4 way and 8 way processor systems
that seems to show a 5% regression vs.  Slab.  Seems that the regression is
due to increased atomic operations use vs.  SLAB in SLUB).  I wonder if
this is applicable or discernable at all in a real workload?]

Signed-off-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-10 09:26:52 -07:00
Mathieu Desnoyers
02b67325a6 x86_64: fix default_do_nmi() missing return after an if ()
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
Cc: Andi Kleen <ak@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-10 09:26:52 -07:00