Add the basic infra for MLME CFG items and the APIs to be used from
other components for VHT - Part-1.
Change-Id: Ie74bfd42ed3d34cc218f20ee3f9d81dc6af02172
CRs-Fixed: 2322300
Driver unload called as part of "rmmod" which reports bug_on
in hdd_bus_bandwidth_deinit as bus_bw timer still running.
Bus_bw timer is not stopped when rmmod is issued if SAP is
enabled and any STA is connected to SAP.
Stop the bus_bw timer during unload for eSAP_STOP_BSS_EVENT
Change-Id: I0ed8309f25b85ebf8ca1e115cbd7aa1c931571ff
CRs-Fixed: 2323641
Rate limit error log in nan and ndp request handler to avoid
excessive console logging.
Change-Id: I9e9bb7185a77533b03e8a17d64c17371770b9b52
CRs-Fixed: 2326275
Use the new API wlan_reg_chan_has_dfs_attribute
to check dfs channel or not. The old API may return
CHANNEL_STATE_DISABLE if the dfs chan is added to
NOL.
If SAP is not on dfs channel, skip the Radar event
process.
Change-Id: Ie5c87e6fa416658df64da54c276fb87f23ed7efb
CRs-Fixed: 2324649
PMO returns failure codes for enable/disable of NS and MC List offloads
when their respective configurations are disabled. As this is expected
behavior, return success instead.
Change-Id: I91b00da9b4026f5975c14f5889cd913b13e1347b
CRs-Fixed: 2323312
Presently the ini gReportMaxLinkSpeed has the default value as 2 that
gives the scaled rate to the userspace instead of actual rate. As the
userspace needs the actual rates, this causes a mismatch.
Configure the value of gReportMaxLinkSpeed to 0 so as to send the actual
rates to the userspace.
Change-Id: Ieaa828d1aabaf099c74a9d5093f5d6fab5da01b5
CRs-Fixed: 2317661
When BMPS is already enabled and we have entered the WOW mode,
we start detecting the AP behavior , where the AP
continuously sets the TIM bit and because of which we don’t go
to PM1 mode after waking UP.
With the current ini value, we don't go to sleep for 30 secs,
which should be updated to 90secs.
Change-Id: I3b551011e90761f1dc13197a4795972f495853a6
CRs-Fixed: 2306266
gEnableEarlyStopScan is for early stop feature. Since it’s based
on rssi only, make the default value 0 on score enabled code
base.
Change-Id: Ie0e0483359d5a7e2cc969001af03500c9e8209c6
CRs-Fixed: 2311372
Since refined PMO configures based on converged cfg component, apply
PMO configurations, remove related legacy codes.
Change-Id: I2cdf18c1000d8cc923c80c00bf530b2b0c60563e
CRs-Fixed: 2322185
Based on cfg component, define PMO configures and add APIs to get or
set configures.
Change-Id: I9b9ff1f8701168787985cbcb219361a3f63c787f
CRs-Fixed: 2322176
Resume wlan threads during wlan shutdown process before adapter reset
because adapter reset triggers vdev destroy and vdev destroy sends
del sta self message to lower layers and in absence of wlan threads
this message will not be processed leading to timeout and vdev peer
object leak. Hence add fix to make sure wlan threads are resumed
before resetting adapters during wlan shutdown process.
Change-Id: Idc31b7e41e5d9734b5f6b96fba24948dbfb45c3d
CRs-Fixed: 2321503
QOS action frame is not handled and thus HDD's dscp mapping
are not updated.
Update the HDD's dscp mapping properly once hdd receive
QOS action frame.
Change-Id: I04ba9882767918cfb0c551791783f2b7eac998d5
CRs-Fixed: 2325729
In ol_txrx_peer_get_ref(), console logging is done after holding
spin lock which leads to spinlock lockup.
Avoid excess logging into console while holding spin lock.
Change-Id: Iae4fa6006358e26796ae2c262aca01bec7eacd21
CRs-Fixed: 2325704
Remove the legacy definitions that are related to the WEP
cfg.
Move them to mlme component
Change-Id: Ibcec8adf15123d12ad7c2eb6ed770b44a093673a
CRs-Fixed: 2324046
sme_is_conn_state_connected API is incorrectly places inside
FEATURE_BSS_TRANSITION ifdef causing compilation failure if the
flag FEATURE_BSS_TRANSITION is disabled.
Move sme_is_conn_state_connected outside of FEATURE_BSS_TRANSITION.
Change-Id: I3563d1e24f48990b0e16919a5ddaa9ed71bd53ac
CRs-Fixed: 2325332
in wma_ibss_peer_info_event_handler, the driver has a upper
bound check on num_peers and not a lower bound check.
the num_peers should be a positive value.
Since there is no check to see if num_peers is set to 0,
this check can underflow and result in multiple OOB writes
once the loop has incremented more than 32 times.
Fix is to check whether num_peers is a positive value,
and return if not found true.
Change-Id: I599151cc6720ed931142ad6a519add6957fea467
CRs-Fixed: 2324139
When peer creation fails in wma_create_peer, vdev delete is sent
to the fw and then eWNI_SME_ADD_STA_SELF_RSP is sent to sme.
Here three error cases needs to be handled:
1. The vdev deletion has happened, but the cdp_detach_peer is
not done. So the data path peer remains. Also the vdev_active
flag that was set after vdev creation was not unset.
2. The eWNI_SME_ADD_STA_SELF_RSP msg handler
csr_process_add_sta_session_rsp invokes csr_roam_session_opened
which signals HDD that vdev is created successfully and hdd
calls hdd_vdev_ready and vdev related parameter set commands are
sent to FW for the deleted vdev.
3. Vdev delete is not sent for objmgr peer creation failure in
case of VDEV_TYPE_STA and release vdev object ref count.
Add cdp_vdev_detach() calls during error case and set the
vdev_active flag to false. Handle releasing vdev object ref
count in all needed error case flows.
Propagate the error in wma_vdev_attach() through
csr_roam_session_opened() to HDD and abort the vdev create.
Change-Id: Iec97122d011098fae7ae2a59864fbe8ca8a0980e
CRs-Fixed: 2322212
Need release cmd e_sme_command_del_sta_session before
hdd_sme_close_session_callback.
hdd_sme_close_session_callback will call
qdf_event_set(&adapter->qdf_session_close_event),
hdd_vdev_destroy will destroy vdev after qdf_session_close_event
completed, while csr_release_command will still access vdev.
Change-Id: Idc581bdd4f1d63b4903ee802326474ba83d528e5
CRs-Fixed: 2324616
wlan_hdd_chan_info_cb is using info log level to log debug
message and its leading to excessive console logging since
info logs are logged on console. Reduce the log level to
avoid excessive console logging.
Change-Id: I79f67aec5c223126a0de74965336048dc7d4a547
CRs-Fixed: 2323586
