Currently, we do nothing to guarantee we have a consistent DMA buffer for
asynchronous receive packets. Rather than doing several sync's following a
dma_map_single() to get consistent buffers, just switch to using
dma_alloc_coherent().
Resolves constant buffer failures on my own x86_64 laptop w/4GB of RAM and
likely to fix a number of other failures witnessed on x86_64 systems with
4GB of RAM or more.
Signed-off-by: Jarod Wilson <jwilson@redhat.com>
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
Fix I/O errors due to SYM13FW500's inability to handle larger request
sizes. Reported by Piergiorgio Sartor <piergiorgio.sartor@nexgo.de> for
firewire-sbp2 in https://bugzilla.redhat.com/show_bug.cgi?id=436879
This fix is necessary because sbp2's default request size limit has been
lifted since 2.6.25-rc1.
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
Signed-off-by: Jarod Wilson <jwilson@redhat.com>
Fix I/O errors due to SYM13FW500's inability to handle larger request
sizes. Reported by Piergiorgio Sartor <piergiorgio.sartor@nexgo.de> in
https://bugzilla.redhat.com/show_bug.cgi?id=436879
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
Signed-off-by: Jarod Wilson <jwilson@redhat.com>
Remove some less necessary information, point out that video1394 and
dv1394 should be blacklisted along with ohci1394.
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
Per the SBP-2 specification, all SBP-2 target devices must have a BUSY_TIMEOUT
register. Per the 1394-1995 specification, the retry_limt portion of the
register should be set to 0x0 initially, and set on the target by a logged in
initiator (i.e., a Linux host w/firewire controller(s)).
Well, as it turns out, lots of devices these days have actually moved on to
starting to implement SBP-3 compliance, which says that retry_limit should
default to 0xf instead (yes, SBP-3 stomps directly on 1394-1995, oops).
Prior to this change, the firewire driver stack didn't touch retry_limit, and
any SBP-3 compliant device worked fine, while SBP-2 compliant ones were unable
to retransmit when the host returned an ack_busy_X, which resulted in stalled
out I/O, eventually causing the SCSI layer to give up and offline the device.
The simple fix is for us to set retry_limit to 0xf in the register for all
devices (which actually matches what the old ieee1394 stack did).
Prior to this change, a hard disk behind an SBP-2 Prolific PL-3507 bridge chip
would routinely encounter buffer I/O errors and wind up offlined by the SCSI
layer. With this change, I've encountered zero I/O failures moving tens of GB
of data around.
Signed-off-by: Jarod Wilson <jwilson@redhat.com>
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
Mostly copied from ohci1394.c. Necessary for some older Macs, e.g.
PowerBook G3 Pismo and early PowerBook G4 Titanium.
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
Copied from ohci1394.c. This code is necessary to prevent machine check
exceptions when reloading or resuming the driver.
Tested on a 1st generation PowerBook G4 Titanium, which also needs the
pci_probe() hunk.
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
I was able to reproduce the system exception on resume with a 3rd-gen
Titanium PowerBook G4 667, and this patch does let the system resume
successfully now.
Not quite clear if there was possibly an updated version coming using
pci_enable_device() instead of the pair of pmac_call_feature() calls,
but either way, this is a definite must-have, at least for older ppc
macs -- my Aluminum PowerBook G4/1.67 suspends and resumes without this
patch just fine.
Signed-off-by: Jarod Wilson <jwilson@redhat.com>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Kills warnings from 'make C=1 CHECKFLAGS="-D__CHECK_ENDIAN__" modules':
drivers/firewire/fw-transaction.c:771:10: warning: incorrect type in assignment (different base types)
drivers/firewire/fw-transaction.c:771:10: expected unsigned int [unsigned] [usertype] <noident>
drivers/firewire/fw-transaction.c:771:10: got restricted unsigned int [usertype] <noident>
drivers/firewire/fw-transaction.h:93:10: warning: incorrect type in assignment (different base types)
drivers/firewire/fw-transaction.h:93:10: expected unsigned int [unsigned] [usertype] <noident>
drivers/firewire/fw-transaction.h:93:10: got restricted unsigned int [usertype] <noident>
drivers/firewire/fw-ohci.c:1490:8: warning: restricted degrades to integer
drivers/firewire/fw-ohci.c:1490:35: warning: restricted degrades to integer
drivers/firewire/fw-ohci.c:1516:5: warning: cast to restricted type
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
Signed-off-by: Jarod Wilson <jwilson@redhat.com>
The generation of incoming requests was filled in in wrong byte order on
machines with big endian CPU.
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
Signed-off-by: Jarod Wilson <jwilson@redhat.com>
* git://git.kernel.org/pub/scm/linux/kernel/git/tglx/linux-2.6-hrt:
time: remove obsolete CLOCK_TICK_ADJUST
time: don't touch an offlined CPU's ts->tick_stopped in tick_cancel_sched_timer()
time: prevent the loop in timespec_add_ns() from being optimised away
ntp: use unsigned input for do_div()
This fixes a boot panic due to a typo in the recent iommu patchset from
FUJITA Tomonori <tomof@acm.org> - the code used dma_get_max_seg_size()
instead of dma_get_seg_boundary().
It also removes a couple of unnecessary BUG_ON() and ALIGN() macros.
Signed-off-by: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Reported-and-tested-by: Bob Tracy <rct@frus.com>
Acked-by: FUJITA Tomonori <tomof@acm.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
We currently set the root-domain online span automatically when the
domain is added to the cpu if the cpu is already a member of
cpu_online_map.
This was done as a hack/bug-fix for s2ram, but it also causes a problem
with hotplug CPU_DOWN transitioning. The right way to fix the original
problem is to actually respond to CPU_UP events, instead of CPU_ONLINE,
which is already too late.
This solves the hung reboot regression reported by Andrew Morton and
others.
Signed-off-by: Gregory Haskins <ghaskins@novell.com>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The first version of the ntp_interval/tick_length inconsistent usage patch was
recently merged as bbe4d18ac2http://git.kernel.org/gitweb.cgi?p=linux/kernel/git/torvalds/linux-2.6.git;a=commit;h=bbe4d18ac2e058c56adb0cd71f49d9ed3216a405
While the fix did greatly improve the situation, it was correctly pointed out
by Roman that it does have a small bug: If the users change clocksources after
the system has been running and NTP has made corrections, the correctoins made
against the old clocksource will be applied against the new clocksource,
causing error.
The second attempt, which corrects the issue in the NTP_INTERVAL_LENGTH
definition has also made it up-stream as commit
e13a2e61ddhttp://git.kernel.org/gitweb.cgi?p=linux/kernel/git/torvalds/linux-2.6.git;a=commit;h=e13a2e61dd5152f5499d2003470acf9c838eab84
Roman has correctly pointed out that CLOCK_TICK_ADJUST is calculated
based on the PIT's frequency, and isn't really relevant to non-PIT
driven clocksources (that is, clocksources other then jiffies and pit).
This patch reverts both of those changes, and simply removes
CLOCK_TICK_ADJUST.
This does remove the granularity error correction for users of PIT and Jiffies
clocksource users, but the granularity error but for the majority of users, it
should be within the 500ppm range NTP can accommodate for.
For systems that have granularity errors greater then 500ppm, the
"ntp_tick_adj=" boot option can be used to compensate.
[johnstul@us.ibm.com: provided changelog]
[mattilinnanvuori@yahoo.com: maek ntp_tick_adj static]
Signed-off-by: Roman Zippel <zippel@linux-m68k.org>
Acked-by: john stultz <johnstul@us.ibm.com>
Signed-off-by: Matti Linnanvuori <mattilinnanvuori@yahoo.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: mingo@elte.hu
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Silences WARN_ONs in rcu_enter_nohz() and rcu_exit_nohz(), which appeared
before caused by (repeated) calls to:
$ echo 0 > /sys/devices/system/cpu/cpu1/online
$ echo 1 > /sys/devices/system/cpu/cpu1/online
Signed-off-by: Karsten Wiese <fzu@wemgehoertderstaat.de>
Cc: johnstul@us.ibm.com
Cc: Rafael Wysocki <rjw@sisk.pl>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Ingo Molnar <mingo@elte.hu>
Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Since some architectures don't support __udivdi3().
Signed-off-by: Segher Boessenkool <segher@kernel.crashing.org>
Cc: john stultz <johnstul@us.ibm.com>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
The kernel NTP code shouldn't hand 64-bit *signed* values to do_div(). Make it
instead hand 64-bit unsigned values. This gets rid of a couple of warnings.
Signed-off-by: David Howells <dhowells@redhat.com>
Cc: Roman Zippel <zippel@linux-m68k.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: john stultz <johnstul@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
In commit ee7c82da83 ("wait_task_stopped:
simplify and fix races with SIGCONT/SIGKILL/untrace"), the magic (short)
cast when storing si_code was lost in wait_task_stopped. This leaks the
in-kernel CLD_* values that do not match what userland expects.
Signed-off-by: Roland McGrath <roland@redhat.com>
Cc: Oleg Nesterov <oleg@tv-sign.ru>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The previous patch to move chainiv and eseqiv into blkcipher created
a section mismatch for the chainiv exit function which was also called
from __init. This patch removes the __exit marking on it.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This makes 64-bit ptrace calls setting the 64-bit orig_ax field for a
32-bit task sign-extend the low 32 bits up to 64. This matches what a
64-bit debugger expects when tracing a 32-bit task.
This follows on my "x86_64 ia32 syscall restart fix". This didn't
matter until that was fixed.
The debugger ignores or zeros the high half of every register slot it
sets (including the orig_rax pseudo-register) uniformly. It expects
that the setting of the low 32 bits always has the same meaning as a
32-bit debugger setting those same 32 bits with native 32-bit
facilities.
This never arose before because the syscall restart check never
matched any -ERESTART* values due to lack of sign extension. Before
that fix, even 32-bit ptrace setting orig_eax to -1 failed to trigger
the restart check anyway. So this was never noticed as a regression
of 64-bit debuggers vs 32-bit debuggers on the same 64-bit kernel.
Signed-off-by: Roland McGrath <roland@redhat.com>
[ Changed to just do the sign-extension unconditionally on x86-64,
since orig_ax is always just a small integer and doesn't need
the full 64-bit range ]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This adds another Broadcom BCM2045 based device to the blacklist, with
these settings the micro dongle works on my system.
Signed-off-by: Karsten Keil <kkeil@suse.de>
Acked-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* 'slab-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/christoph/vm:
slub: fix typo in Documentation/vm/slub.txt
slab: NUMA slab allocator migration bugfix
slub: Do not cross cacheline boundaries for very small objects
slab - use angle brackets for include of kmalloc_sizes.h
slab numa fallback logic: Do not pass unfiltered flags to page allocator
slub statistics: Fix check for DEACTIVATE_REMOTE_FREES
* git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6:
ide: update references to Documentation/ide/ide.txt (v2)
ide: move ide.txt to Documentation/ide/
ide: fix buggy code in ide_register_hw()
ide: fix enabling DMA on it821x in "smart" mode
ide-cd: mark REQ_TYPE_ATA_PC write requests with REQ_RW flag
Cleanup some of Documentation directory:
Move Documentation/ide.txt to the ide/ sub-directory.
Fix trailing whitespace while there.
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Relocating the index to come after finding the hwif pointer.
Signed-off-by: Peter Teoh <htmldeveloper@gmail.com>
Reported-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
ide_tune_dma() should return '1' if IDE_HFLAG_NO_SET_MODE host flag is set.
Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
On Thursday 06 March 2008, walt wrote:
> For me, this commit causes the problem it's intended to fix:
>
> commit 9f10d9ee0a
> Author: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
> Date: Tue Feb 26 21:50:35 2008 +0100
>
> ide-cd: fix 'ireason' handling for REQ_TYPE_ATA_PC requests
>
> This fixes some hangs caused by not finishing the transfer before ending
> the request and also makes use of 'ireason == 1' quirk for spurious IRQs.
>
> When I mount a CD there is a long delay, and I see this error message:
>
> hdc: ide_cd_check_ireason: wrong transfer direction!
> cdrom: failed setting lba address space
> hdc: status error: status=0x58 { DriveReady SeekComplete DataRequest }
> ide: failed opcode was: unknown
> hdc: drive not ready for command
> <repeated many times>
>
> When I revert this commit everything works properly again, including
> CD burning.
It turned out that REQ_TYPE_ATA_PC write requests were not marked as such
(the previous commit assumed them to be).
Reported-by: walt <w41ter@gmail.com>
Tested-by: walt <w41ter@gmail.com>
Reviewed-by: Borislav Petkov <petkovbb@googlemail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
* 'hotfixes' of git://git.linux-nfs.org/projects/trondmy/nfs-2.6:
NFS: Fix dentry revalidation for NFSv4 referrals and mountpoint crossings
NFS: Fix the fsid revalidation in nfs_update_inode()
SUNRPC: Fix a nfs4 over rdma transport oops
NFS: Fix an f_mode/f_flags confusion in fs/nfs/write.c
As long as the directory contents haven't changed, we should just let the
path walk proceed to cross the mountpoint. Apart from being an optimisation
in the case of 'nohide' mountpoint traversals, it also fixes an issue with
referrals: referral inodes don't have valid filehandles, so calling
nfs_revalidate_inode() on them is a bug.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
When we detect that we've crossed a mountpoint on the remote server, we
must take care not to use that inode to revalidate the fsid on our
current superblock. To do so, we label the inode as a remote mountpoint,
and check for that in nfs_update_inode().
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Prevent an RPC oops when freeing a dynamically allocated RDMA
buffer, used in certain special-case large metadata operations.
Signed-off-by: Tom Talpey <tmt@netapp.com>
Signed-off-by: James Lentini <jlentini@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
The card state mutex was only initialized when a device was connected,
but used during unload unconditionally, leading to an Oops if a driver
was loaded and unloaded again without ever connecting a device.
Fix this by initializing the mutex as soon as the structure is allocated.
Also add a missing mutex unlock revealed in the same execution path.
This fixes a possible Oops in 2.6.25-rc that was introduced by commit
e468c04894 ("Gigaset: permit module
unload").
Thanks to Roland Kletzing for reporting this problem.
Signed-off-by: Tilman Schmidt <tilman@imap.cc>
Tested-by: Roland Kletzing <devzero@web.de>
Cc: Hansjoerg Lipp <hjlipp@web.de>
Cc: Karsten Keil <kkeil@suse.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mingo/linux-2.6-sched-devel:
sched: don't allow rt_runtime_us to be zero for groups having rt tasks
sched: rt-group: fixup schedulability constraints calculation
sched: fix the wrong time slice value for SCHED_FIFO tasks
sched: export task_nice
sched: balance RT task resched only on runqueue
sched: retain vruntime
randconfig testing found a bootup lockup in drivers/char/esp.c because
of a spinlock that wasn't correctly initialized.
I'm not sure why it became more prominent in 2.6.25-rc4, the bug seems
rather old and i've been doing allyesconfig bootups for ages with
CONFIG_ESP enabled.
This fixes this bootup lockup:
PM: Adding info for No Bus:ttyP63
ttyP32 at 0x0240 (irq = 0) is an ESP primary port
BUG: spinlock lockup on CPU#0, swapper/1, f56dd004
Pid: 1, comm: swapper Not tainted 2.6.25-rc4-sched-devel.git-x86-latest.git #402 [<c03ac6f4>] _raw_spin_lock+0x134/0x140
[<c08649be>] _spin_lock_irqsave+0x5e/0x80
[<c0b9fbfe>] ? espserial_init+0x2be/0x6e0
[<c0b9fbfe>] espserial_init+0x2be/0x6e0
[<c0b877a3>] kernel_init+0x83/0x260
[<c0b9f940>] ? espserial_init+0x0/0x6e0
[<c010416a>] ? restore_nocheck_notrace+0x0/0xe
[<c0b87720>] ? kernel_init+0x0/0x260
[<c0b87720>] ? kernel_init+0x0/0x260
[<c0104507>] kernel_thread_helper+0x7/0x10
=======================
kzalloc() is not the way to initialize spinlocks anymore.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This patch checks if we can set the rt_runtime_us to 0. If there is a
realtime task in the group, we don't want to set the rt_runtime_us as 0
or bad things will happen. (that task wont get any CPU time despite
being TASK_RUNNNG)
Signed-off-by: Dhaval Giani <dhaval@linux.vnet.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
it was only possible to configure the rt-group scheduling parameters
beyond the default value in a very small range.
that's because div64_64() has a different calling convention than
do_div() :/
fix a few untidies while we are here; sysctl_sched_rt_period may overflow
due to that multiplication, so cast to u64 first. Also that RUNTIME_INF
juggling makes little sense although its an effective NOP.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Function sys_sched_rr_get_interval returns wrong time slice value for
SCHED_FIFO tasks. The time slice for SCHED_FIFO tasks should be 0.
Signed-off-by: Miao Xie <miaox@cn.fujitsu.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Sripathi Kodi reported a crash in the -rt kernel:
https://bugzilla.redhat.com/show_bug.cgi?id=435674
this is due to a place that can reschedule a task without holding
the tasks runqueue lock. This was caused by the RT balancing code
that pulls RT tasks to the current run queue and will reschedule the
current task.
There's a slight chance that the pulling of the RT tasks will release
the current runqueue's lock and retake it (in the double_lock_balance).
During this time that the runqueue is released, the current task can
migrate to another runqueue.
In the prio_changed_rt code, after the pull, if the current task is of
lesser priority than one of the RT tasks pulled, resched_task is called
on the current task. If the current task had migrated in that small
window, resched_task will be called without holding the runqueue lock
for the runqueue that the task is on.
This race condition also exists in the mainline kernel and this patch
adds a check to make sure the task hasn't migrated before calling
resched_task.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Tested-by: Sripathi Kodi <sripathik@in.ibm.com>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Kei Tokunaga reported an interactivity problem when moving tasks
between control groups.
Tasks would retain their old vruntime when moved between groups, this
can cause funny lags. Re-set the vruntime on group move to fit within
the new tree.
Reported-by: Kei Tokunaga <tokunaga.keiich@jp.fujitsu.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
The new x86 setup code (4fd06960f1) broke booting on an old P3/500MHz
with an onboard Voodoo3 of mine. After debugging it, it turned out
to be caused by the fact that the vesa probing now asks for VBE2 data.
Disassembing the video BIOS shows that it overflows the vesa_general_info
structure when VBE2 data is requested because the source addresses for the
information strings which get strcpy'ed to the buffer lie outside the 32K
BIOS code (and hence contain long sequences of 0xff's).
E.G.:
get_vbe_controller_info:
00002A9C 60 pushaw
00002A9D 1E push ds
00002A9E 0E push cs
00002A9F 1F pop ds
00002AA0 2BC9 sub cx,cx
00002AA2 6626813D56424532 cmp dword [es:di],0x32454256 ; "VBE2"
00002AAA 7501 jnz .1
00002AAC 41 inc cx
.1:
00002AAD 51 push cx
00002AAE B91400 mov cx,0x14
00002AB1 BED47F mov si, controller_header
00002AB4 57 push di
00002AB5 F3A4 rep movsb ; copy vbe1.2 header
00002AB7 B9EC00 mov cx,0xec
00002ABA 2AC0 sub al,al
00002ABC F3AA rep stosb ; zero pad remainder
00002ABE 5F pop di
00002ABF E8EB0D call word get_memory
00002AC2 C1E002 shl ax,0x2
00002AC5 26894512 mov [es:di+0x12],ax ; total memory
00002AC9 26C745040003 mov word [es:di+0x4],0x300 ; VBE version
00002ACF 268C4D08 mov [es:di+0x8],cs
00002AD3 268C4D10 mov [es:di+0x10],cs
00002AD7 59 pop cx
00002AD8 E361 jcxz .done ; VBE2 requested?
00002ADA 8D9D0001 lea bx,[di+0x100]
00002ADE 53 push bx
00002ADF 87DF xchg bx,di ; di now points to 2nd half
00002AE1 26C747140001 mov word [es:bx+0x14],0x100 ; sw rev
00002AE7 26897F06 mov [es:bx+0x6],di ; oem string
00002AEB 268C4708 mov [es:bx+0x8],es
00002AEF BE5280 mov si,0x8052 ; oem string
00002AF2 E87A1B call word strcpy
00002AF5 26897F0E mov [es:bx+0xe],di ; video mode list
00002AF9 268C4710 mov [es:bx+0x10],es
00002AFD B91E00 mov cx,0x1e
00002B00 BEE87F mov si,vidmodes
00002B03 F3A5 rep movsw
00002B05 26897F16 mov [es:bx+0x16],di ; oem vendor
00002B09 268C4718 mov [es:bx+0x18],es
00002B0D BE2480 mov si,0x8024 ; oem vendor
00002B10 E85C1B call word strcpy
00002B13 26897F1A mov [es:bx+0x1a],di ; oem product
00002B17 268C471C mov [es:bx+0x1c],es
00002B1B BE3880 mov si,0x8038 ; oem product
00002B1E E84E1B call word strcpy
00002B21 26897F1E mov [es:bx+0x1e],di ; oem product rev
00002B25 268C4720 mov [es:bx+0x20],es
00002B29 BE4580 mov si,0x8045 ; oem product rev
00002B2C E8401B call word strcpy
00002B2F 58 pop ax
00002B30 B90001 mov cx,0x100
00002B33 2BCF sub cx,di
00002B35 03C8 add cx,ax
00002B37 2AC0 sub al,al
00002B39 F3AA rep stosb ; zero pad
.done:
00002B3B 1F pop ds
00002B3C 61 popaw
00002B3D B84F00 mov ax,0x4f
00002B40 C3 ret
(The full BIOS can be found at http://peter.korsgaard.com/vgabios.bin
if interested).
The old setup code didn't ask for VBE2 info, and the new code doesn't
actually do anything with the extra information, so the fix is to simply
not request it. Other BIOS'es might have the same problem.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Jan Beulich noticed that the reboot fixups went missing during
reboot.c unification.
(commit 4d022e35fd)
Geode and a few other rare boards with special reboot quirks are
affected.
Reported-by: Jan Beulich <jbeulich@novell.com>
Signed-off-by: Jan Beulich <jbeulich@novell.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
convert_fxsr_to_user() in 2.6.24's i387_32.c did this, and
convert_to_fxsr() also does the inverse, so I assume it's an oversight
that it is no longer being done.
[ mingo@elte.hu:
we encode it this way because there's no space for the 'FPU Last
Instruction Opcode' (->fop) field in the legacy user_i387_ia32_struct
that PTRACE_GETFPREGS/PTRACE_SETFPREGS uses.
it's probably pure legacy - i'd be surprised if any user-space relied on
the FPU Last Opcode in any way. But indeed we used to do it previously
so the most conservative thing is to preserve that piece of information.
]
Signed-off-by: Jan Beulich <jbeulich@novell.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
