Commit Graph

10558 Commits

Author SHA1 Message Date
Grant Coady
c7461a6652 [PATCH] hwmon: adm9240 driver update - dynamic sysfs
hwmon: adm9240 update 2/2: convert to use dynamic sysfs accessors

This patch converts adm9240 to use Yani Ioannou's dynamic sysfs callbacks,
reducing driver memory footprint from 16312 to 14104 bytes on 2.6.14-rc1,
removing the old driver macro mess.

Run tested on Intel SE440BX-2 mobo.

Signed-off-by: Grant Coady <gcoady@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-10-28 14:02:05 -07:00
Grant Coady
205cf13e0b [PATCH] hwmon: adm9240 driver update - cleanups
hwmon: adm9240 update 1/2: cleanups:

o remove i2c read/write wrapper interface as it does nothing,
o change kmalloc + memset to kzalloc

Signed-off-by: Grant Coady <gcoady@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-10-28 14:02:05 -07:00
Linus Torvalds
84860bf064 Merge master.kernel.org:/pub/scm/linux/kernel/git/gregkh/driver-2.6 2005-10-28 13:09:47 -07:00
Linus Torvalds
8caf89157d Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/shaggy/jfs-2.6 2005-10-28 12:44:24 -07:00
Yan Zheng
f12baeab9d [MCAST] IPv6: Fix algorithm to compute Querier's Query Interval
5.1.3.  Maximum Response Code

   The Maximum Response Code field specifies the maximum time allowed
   before sending a responding Report.  The actual time allowed, called
   the Maximum Response Delay, is represented in units of milliseconds,
   and is derived from the Maximum Response Code as follows:

   If Maximum Response Code < 32768,
      Maximum Response Delay = Maximum Response Code

   If Maximum Response Code >=32768, Maximum Response Code represents a
   floating-point value as follows:

       0 1 2 3 4 5 6 7 8 9 A B C D E F
      +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
      |1| exp |          mant         |
      +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+

   Maximum Response Delay = (mant | 0x1000) << (exp+3)


5.1.9.  QQIC (Querier's Query Interval Code)

   The Querier's Query Interval Code field specifies the [Query
   Interval] used by the Querier.  The actual interval, called the
   Querier's Query Interval (QQI), is represented in units of seconds,
   and is derived from the Querier's Query Interval Code as follows:

   If QQIC < 128, QQI = QQIC

   If QQIC >= 128, QQIC represents a floating-point value as follows:

       0 1 2 3 4 5 6 7
      +-+-+-+-+-+-+-+-+
      |1| exp | mant  |
      +-+-+-+-+-+-+-+-+

   QQI = (mant | 0x10) << (exp + 3)

                                                -- rfc3810

#define MLDV2_QQIC(value) MLDV2_EXP(0x80, 4, 3, value)
#define MLDV2_MRC(value) MLDV2_EXP(0x8000, 12, 3, value)

Above macro are defined in mcast.c. but 1 << 4 == 0x10 and 1 << 12 == 0x1000.
So the result computed by original Macro is larger.

Signed-off-by: Yan Zheng <yanzheng@21cn.com>
Acked-by: David L Stevens <dlstevens@us.ibm.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com>
2005-10-28 16:35:18 -02:00
Ananda Raju
e89e9cf539 [IPv4/IPv6]: UFO Scatter-gather approach
Attached is kernel patch for UDP Fragmentation Offload (UFO) feature.

1. This patch incorporate the review comments by Jeff Garzik.
2. Renamed USO as UFO (UDP Fragmentation Offload)
3. udp sendfile support with UFO

This patches uses scatter-gather feature of skb to generate large UDP
datagram. Below is a "how-to" on changes required in network device
driver to use the UFO interface.

UDP Fragmentation Offload (UFO) Interface:
-------------------------------------------
UFO is a feature wherein the Linux kernel network stack will offload the
IP fragmentation functionality of large UDP datagram to hardware. This
will reduce the overhead of stack in fragmenting the large UDP datagram to
MTU sized packets

1) Drivers indicate their capability of UFO using
dev->features |= NETIF_F_UFO | NETIF_F_HW_CSUM | NETIF_F_SG

NETIF_F_HW_CSUM is required for UFO over ipv6.

2) UFO packet will be submitted for transmission using driver xmit routine.
UFO packet will have a non-zero value for

"skb_shinfo(skb)->ufo_size"

skb_shinfo(skb)->ufo_size will indicate the length of data part in each IP
fragment going out of the adapter after IP fragmentation by hardware.

skb->data will contain MAC/IP/UDP header and skb_shinfo(skb)->frags[]
contains the data payload. The skb->ip_summed will be set to CHECKSUM_HW
indicating that hardware has to do checksum calculation. Hardware should
compute the UDP checksum of complete datagram and also ip header checksum of
each fragmented IP packet.

For IPV6 the UFO provides the fragment identification-id in
skb_shinfo(skb)->ip6_frag_id. The adapter should use this ID for generating
IPv6 fragments.

Signed-off-by: Ananda Raju <ananda.raju@neterion.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> (forwarded)
Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com>
2005-10-28 16:30:00 -02:00
Dave Kleikamp
7038f1cbac JFS: make sure right-most xtree pages have header.next set to zero
The xtTruncate code was only doing this for leaf pages.  When a file is
horribly fragmented, we may truncate a file leaving an internal page with
an invalid head.next field, which may cause a stale page to be referenced.

Signed-off-by: Dave Kleikamp <shaggy@austin.ibm.com>
2005-10-28 13:27:40 -05:00
Arnaldo Carvalho de Melo
de5144164f Merge master.kernel.org:/pub/scm/linux/kernel/git/holtmann/bluetooth-2.6 2005-10-28 15:49:24 -02:00
Marcel Holtmann
245dc3d19b [Bluetooth] Ignore additional interfaces of BPA 100/105 devices
If a BPA 100/105 device contains more then one interface then ignore the
additional interfaces, because they are unused.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2005-10-28 19:20:57 +02:00
Marcel Holtmann
dd7f5527b3 [Bluetooth] Update security filter for Extended Inquiry Response
This patch updates the HCI security filter with support for the Extended
Inquiry Response (EIR) feature.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2005-10-28 19:20:53 +02:00
Marcel Holtmann
6516455d3b [Bluetooth] Make more functions static
This patch makes another bunch of functions static.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2005-10-28 19:20:48 +02:00
Marcel Holtmann
0372a6627f [Bluetooth] Cleanup of the HCI UART driver
This patch contains the big cleanup of the HCI UART driver. The uneeded
header files are removed and their structure declarations are moved into
the protocol implementations.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2005-10-28 19:20:45 +02:00
Marcel Holtmann
20dd6f59d6 [Bluetooth] Remove TXCRC compile option for BCSP driver
The TXCRC compile option is not really useful and thus change it
into a module parameter.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2005-10-28 19:20:40 +02:00
Marcel Holtmann
408c1ce271 [Bluetooth] Move CRC table into RFCOMM core
This patch moves rfcomm_crc_table[] into the RFCOMM core, because there
is no need to keep it in a separate file.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2005-10-28 19:20:36 +02:00
Greg KH
6fbfddcb52 Merge ../bleed-2.6 2005-10-28 10:13:16 -07:00
Linus Torvalds
8ed5759043 Merge branch 'forlinus' of git://parisc-linux.org/home/kyle/git/parisc-2.6 2005-10-28 10:08:46 -07:00
Takashi Iwai
1a222bca26 [PATCH] Fix documentation of driver suspend/resume callbacks
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-10-28 09:52:57 -07:00
Randy Dunlap
c41455fbac [PATCH] kernel-doc: drivers/base fixes
driver/base: add missing function parameters; eliminate all warnings.

Signed-off-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-10-28 09:52:56 -07:00
Russell King
9480e307cd [PATCH] DRIVER MODEL: Get rid of the obsolete tri-level suspend/resume callbacks
In PM v1, all devices were called at SUSPEND_DISABLE level.  Then
all devices were called at SUSPEND_SAVE_STATE level, and finally
SUSPEND_POWER_DOWN level.  However, with PM v2, to maintain
compatibility for platform devices, I arranged for the PM v2
suspend/resume callbacks to call the old PM v1 suspend/resume
callbacks three times with each level in order so that existing
drivers continued to work.

Since this is obsolete infrastructure which is no longer necessary,
we can remove it.  Here's an (untested) patch to do exactly that.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-10-28 09:52:56 -07:00
Jesper Juhl
a3a3395e48 [PATCH] Driver Core: Big kfree NULL check cleanup - Documentation
This is the Documentation/ part of the big kfree cleanup patch.

Remove pointless checks for NULL prior to calling kfree() in example code in Documentation/.

Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-10-28 09:52:55 -07:00
Greg Kroah-Hartman
ad7e14a55e [PATCH] update required version of udev
The 071 release is needed to handle the input changes.  Older versions
will work properly with module-based systems, but not for users that
build input stuff into the kernel.

Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-10-28 09:52:55 -07:00
Ben Dooks
a1bdc7aad8 [PATCH] drivers/base - fix sparse warnings
There are a number of sparse warnings from the latest sparse
snapshot being generated from the drivers/base build. The
main culprits are due to the initialisation functions not
being declared in a header file.

Also, the firmware.c file should include <linux/device.h>
to get the prototype of  firmware_register() and
firmware_unregister().

This patch moves the init function declerations from the
init.c file to the base.h, and ensures it is included in
all the relevant c sources. It also adds <linux/device.h>
to the included headers for firmware.c.

The patch does not solve all the sparse errors generated,
but reduces the count significantly.

drivers/base/core.c:161:1: warning: symbol 'devices_subsys' was not declared. Should it be static?
drivers/base/core.c:417:12: warning: symbol 'devices_init' was not declared. Should it be static?
drivers/base/sys.c:253:6: warning: symbol 'sysdev_shutdown' was not declared. Should it be static?
drivers/base/sys.c:326:5: warning: symbol 'sysdev_suspend' was not declared. Should it be static?
drivers/base/sys.c:428:5: warning: symbol 'sysdev_resume' was not declared. Should it be static?
drivers/base/sys.c:450:12: warning: symbol 'system_bus_init' was not declared. Should it be static?
drivers/base/bus.c:133:1: warning: symbol 'bus_subsys' was not declared. Should it be static?
drivers/base/bus.c:667:12: warning: symbol 'buses_init' was not declared. Should it be static?
drivers/base/class.c:759:12: warning: symbol 'classes_init' was not declared. Should it be static?
drivers/base/platform.c:313:12: warning: symbol 'platform_bus_init' was not declared. Should it be static?
drivers/base/cpu.c:110:12: warning: symbol 'cpu_dev_init' was not declared. Should it be static?
drivers/base/firmware.c:17:5: warning: symbol 'firmware_register' was not declared. Should it be static?
drivers/base/firmware.c:23:6: warning: symbol 'firmware_unregister' was not declared. Should it be static?
drivers/base/firmware.c:28:12: warning: symbol 'firmware_init' was not declared. Should it be static?
drivers/base/init.c:28:13: warning: symbol 'driver_init' was not declared. Should it be static?
drivers/base/dmapool.c:174:10: warning: implicit cast from nocast type
drivers/base/attribute_container.c:439:1: warning: symbol 'attribute_container_init' was not declared. Should it be static?
drivers/base/power/runtime.c:76:6: warning: symbol 'dpm_set_power_state' was not declared. Should it be static?

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-10-28 09:52:55 -07:00
Dmitry Torokhov
a7fadbe10c [PATCH] input core: remove custom-made hotplug handler
Input: remove custom-made hotplug handler

Now that all input devices are registered with sysfs we can remove
old custom-made hotplug handler and crate a standard one.

Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-10-28 09:52:55 -07:00
Greg Kroah-Hartman
c9bcd582df [PATCH] INPUT: Create symlinks for backwards compatibility
This creates symlinks in /sys/class/input/ to the nested class devices
to help userspace cope with the nesting.

Unfortunatly udev still needs to be updated as it can't handle symlinks
properly here :(

Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-10-28 09:52:55 -07:00
Greg Kroah-Hartman
ea9f240bd8 [PATCH] INPUT: rename input_dev_class to input_class to be correct.
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-10-28 09:52:55 -07:00
Greg Kroah-Hartman
b0fdfebb20 [PATCH] INPUT: remove the input_class structure, as it is unused.
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-10-28 09:52:55 -07:00
Greg Kroah-Hartman
629b77a42c [PATCH] INPUT: Fix oops when accessing sysfs files of nested input devices
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-10-28 09:52:54 -07:00
Greg Kroah-Hartman
967ca69216 [PATCH] INPUT: move the input class devices under their new input_dev devices
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-10-28 09:52:54 -07:00
Greg Kroah-Hartman
23d5090161 [PATCH] INPUT: export input_dev_class so that input drivers can use it.
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-10-28 09:52:54 -07:00
Greg Kroah-Hartman
102040204f [PATCH] INPUT: register the input class device sooner
This is needed so we can actually use the class device within the input
handlers.

Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-10-28 09:52:54 -07:00
Dmitry Torokhov
5c1e9a6a6a [PATCH] Input: export input_dev data via sysfs attributes
Input: export various input device attributes via sysfs

The following structure is exported:

  input0/
	|-- name
	|-- phys
	|-- uniq
	|-- id/{bustype|vendor|product|version}
	`-- capabilities/{ev|abs|rel|key|led|msc|ff|sw}

Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-10-28 09:52:54 -07:00
Dmitry Torokhov
051b2feaa4 [PATCH] Input: show sysfs path in /proc/bus/input/devices
Input: show sysfs path in /proc/bus/input/devices

Show that sysfs and phys path are different objects.

Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-10-28 09:52:54 -07:00
Dmitry Torokhov
5ebdcbc2fc [PATCH] Input: convert sound/ppc/beep to dynamic input_dev allocation
Input: convert sound/ppc/beep to dynamic input_dev allocation

This is required for input_dev sysfs integration

Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-10-28 09:52:54 -07:00
Dmitry Torokhov
34abf91f40 [PATCH] Input: convert net/bluetooth to dynamic input_dev allocation
Input: convert net/bluetooth to dynamic input_dev allocation

This is required for input_dev sysfs integration

Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-10-28 09:52:54 -07:00
Dmitry Torokhov
17dd3f0f7a [PATCH] drivers/input/joystick: convert to dynamic input_dev allocation
Input: convert drivers/input/joystick to dynamic input_dev allocation

This is required for input_dev sysfs integration

Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-10-28 09:52:53 -07:00
Dmitry Torokhov
0259567ad6 [PATCH] Input: convert konicawc to dynamic input_dev allocation
Input: convert konicawc to dynamic input_dev allocation

This is required for input_dev sysfs integration

Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-10-28 09:52:53 -07:00
Dmitry Torokhov
c7f7a569d9 [PATCH] Input: convert drivers/macintosh to dynamic input_dev allocation
Input: convert drivers/macntosh to dynamic input_dev allocation

This is required for input_dev sysfs integration

Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-10-28 09:52:53 -07:00
Dmitry Torokhov
b7df3910c1 [PATCH] drivers/media: convert to dynamic input_dev allocation
Input: convert drivers/media to dynamic input_dev allocation

This is required for input_dev sysfs integration

Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-10-28 09:52:53 -07:00
Dmitry Torokhov
76b7cddfd5 [PATCH] Input: convert driver/input/misc to dynamic input_dev allocation
Input: convert driver/input/misc to dynamic input_dev allocation

This is required for input_dev sysfs integration

Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-10-28 09:52:53 -07:00
Dmitry Torokhov
8878967242 [PATCH] Input: convert onetouch to dynamic input_dev allocation
Input: convert onetouch to dynamic input_dev allocation

This is required for input_dev sysfs integration

Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-10-28 09:52:53 -07:00
Dmitry Torokhov
b416f2e452 [PATCH] Input: convert sonypi to dynamic input_dev allocation
Input: convert sonypi to dynamic input_dev allocation

This is required for input_dev sysfs integration

Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-10-28 09:52:53 -07:00
Dmitry Torokhov
eca1ed196c [PATCH] drivers/input/touchscreen: convert to dynamic input_dev allocation
Input: convert drivers/input/touchscreen to dynamic input_dev allocation

This is required for input_dev sysfs integration

Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-10-28 09:52:53 -07:00
Dmitry Torokhov
bd62266319 [PATCH] Input: convert ucb1x00-ts to dynamic input_dev allocation
Input: convert ucb1x00-ts to dynamic input_dev allocation

This is required for input_dev sysfs integration

Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-10-28 09:52:52 -07:00
Dmitry Torokhov
c5b7c7c395 [PATCH] drivers/usb/input: convert to dynamic input_dev allocation
Input: convert drivers/iusb/input to dynamic input_dev allocation

This is required for input_dev sysfs integration

Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-10-28 09:52:52 -07:00
Dmitry Torokhov
3c42f0c3dd [PATCH] drivers/input/keyboard: convert to dynamic input_dev allocation
Input: convert drivers/input/keyboard to dynamic input_dev allocation

This is required for input_dev sysfs integration

Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-10-28 09:52:52 -07:00
Dmitry Torokhov
2e5b636bb5 [PATCH] drivers/input/mouse: convert to dynamic input_dev allocation
Input: convert drivers/input/mouse to dynamic input_dev allocation

This is required for input_dev sysfs integration

Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-10-28 09:52:52 -07:00
Dmitry Torokhov
d19fbe8a76 [PATCH] Input: prepare to sysfs integration
Input: prepare to sysfs integration

Add struct class_device to input_dev; add input_allocate_dev()
to dynamically allocate input devices; dynamically allocated
devices are automatically registered with sysfs.

Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-10-28 09:52:52 -07:00
Dmitry Torokhov
4f00469c16 [PATCH] Input: kill devfs references
Input: remove references to devfs from input subsystem

Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-10-28 09:52:52 -07:00
Greg Kroah-Hartman
74be227f72 [PATCH] Driver Core: document struct class_device properly
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-10-28 09:52:52 -07:00
Greg Kroah-Hartman
53f4654272 [PATCH] Driver Core: fix up all callers of class_device_create()
The previous patch adding the ability to nest struct class_device
changed the paramaters to the call class_device_create().  This patch
fixes up all in-kernel users of the function.

Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-10-28 09:52:52 -07:00